ImageSharp is a 2D graphics library. In versions below 2.1.11 and 3.0.0 through 3.1.10, a specially crafted GIF file containing a malformed comment extension block (with a missing block terminator) can cause the ImageSharp GIF decoder to enter an infinite loop while attempting to skip the block. This leads to a denial of service. Applications processing untrusted GIF input should upgrade to a patched version. This issue is fixed in versions 2.1.11 and 3.1.11.

Allocation of Resources Without Limits or Throttling vulnerability in Hitachi Ops Center Common Services on Linux allows DoS.This issue affects Hitachi Ops Center Common Services: before 10.9.3-00.

An issue was discovered in the ws crate through 2020-09-25 for Rust. The outgoing buffer is not properly limited, leading to a remote memory-consumption attack.

Impact Cloudflare quiche was discovered to be vulnerable to incorrect congestion window growth, which could cause it to send data at a rate faster than the path might actually support. An unauthenticated remote attacker can exploit the vulnerability by first completing a handshake and initiating a congestion-controlled data transfer towards itself. Then, it could manipulate the victim's congestion control state by sending ACK frames exercising an opportunistic ACK attack; see RFC 9000 Section 21.4. The victim could grow the congestion window beyond typical expectations and allow more bytes in flight than the path might really support. Patches quiche 0.24.4 is the earliest version containing the fix for this issue.

iptables before 1.2.4 does not accurately convert rate limits that are specified on the command line, which could allow attackers or users to generate more or less traffic than intended by the administrator.

Multiple vulnerabilities in the Distance Vector Multicast Routing Protocol (DVMRP) feature of Cisco IOS XR Software could allow an unauthenticated, remote attacker to either immediately crash the Internet Group Management Protocol (IGMP) process or make it consume available memory and eventually crash. The memory consumption may negatively impact other processes that are running on the device. These vulnerabilities are due to the incorrect handling of IGMP packets. An attacker could exploit these vulnerabilities by sending crafted IGMP traffic to an affected device. A successful exploit could allow the attacker to immediately crash the IGMP process or cause memory exhaustion, resulting in other processes becoming unstable. These processes may include, but are not limited to, interior and exterior routing protocols. Cisco will release software updates that address these vulnerabilities.

Pure-FTPd 1.0.48 allows remote attackers to prevent legitimate server use by making enough connections to exceed the connection limit.

A flaw was found in Rust's Ring package. A panic may be triggered when overflow checking is enabled. In the QUIC protocol, this flaw allows an attacker to induce this panic by sending a specially crafted packet. It will likely occur unintentionally in 1 out of every 2**32 packets sent or received.

This affects the package com.fasterxml.jackson.dataformat:jackson-dataformat-cbor from 0 and before 2.11.4, from 2.12.0-rc1 and before 2.12.1. Unchecked allocation of byte buffer can cause a java.lang.OutOfMemoryError exception.

Shibboleth Identify Provider 3.x before 3.4.6 has a denial of service flaw. A remote unauthenticated attacker can cause a login flow to trigger Java heap exhaustion due to the creation of objects in the Java Servlet container session.

In Wireshark 3.2.0 to 3.2.7, the GQUIC dissector could crash. This was addressed in epan/dissectors/packet-gquic.c by correcting the implementation of offset advancement.

Affected devices contain a vulnerability that allows an unauthenticated attacker to trigger a denial of service condition. The vulnerability can be triggered if a large amount of DCP reset packets are sent to the device.

An issue has been discovered in GitLab CE/EE affecting all versions from 14.1 before 18.1.5, 18.2 before 18.2.5, and 18.3 before 18.3.1 that that under certain conditions could have allowed an unauthenticated attacker to cause a denial-of-service condition affecting all users by sending specially crafted GraphQL requests.

In vm-superio before 0.1.1, the serial console FIFO can grow to unlimited memory usage when data is sent to the input source (i.e., standard input). This behavior cannot be reproduced from the guest side. When no rate limiting is in place, the host can be subject to memory pressure, impacting all other VMs running on the same host.

An issue was discovered in Django 4.2 before 4.2.21, 5.1 before 5.1.9, and 5.2 before 5.2.1. The django.utils.html.strip_tags() function is vulnerable to a potential denial-of-service (slow performance) when processing inputs containing large sequences of incomplete HTML tags. The template filter striptags is also vulnerable, because it is built on top of strip_tags().

IBM WebSphere Application Server Liberty 18.0.0.2 through 25.0.0.8 is vulnerable to a denial of service, caused by sending a specially-crafted request. A remote attacker could exploit this vulnerability to cause the server to consume memory resources.

A flaw was found in the way NSS handled CCS (ChangeCipherSpec) messages in TLS 1.3. This flaw allows a remote attacker to send multiple CCS messages, causing a denial of service for servers compiled with the NSS library. The highest threat from this vulnerability is to system availability. This flaw affects NSS versions before 3.58.

Directus is a real-time API and App dashboard for managing SQL database content. The `@directus/storage-driver-s3` package starting in version 9.22.0 and prior to version 12.0.1, corresponding to Directus starting in version 9.22.0 and prior to 11.5.0, is vulnerable to asset unavailability after a burst of malformed transformations. When making many malformed transformation requests at once, at some point, all assets are served as 403. This causes denial of assets for all policies of Directus, including Admin and Public. Version 12.0.1 of the `@directus/storage-driver-s3` package, corresponding to version 11.5.0 of Directus, fixes the issue.

An attacker can cause excessive memory growth in a Go server accepting HTTP/2 requests. HTTP/2 server connections contain a cache of HTTP header keys sent by the client. While the total number of entries in this cache is capped, an attacker sending very large keys can cause the server to allocate approximately 64 MiB per open connection.

In some circumstances, a stale value could have been used for a global variable in WASM JIT analysis. This resulted in incorrect compilation and a potentially exploitable crash in the content process. This vulnerability affects Firefox < 116, Firefox ESR < 102.14, and Firefox ESR < 115.1.

Directus is a real-time API and App dashboard for managing SQL database content. The `@directus/storage-driver-s3` package starting in version 9.22.0 and prior to version 12.0.1, corresponding to Directus starting in version 9.22.0 and prior to 11.5.0, is vulnerable to asset unavailability after a burst of HEAD requests. Some tools use Directus to sync content and assets, and some of those tools use the HEAD method to check the existence of files. When making many HEAD requests at once, at some point, all assets are eventually served as 403. This causes denial of assets for all policies of Directus, including Admin and Public. Version 12.0.1 of the `@directus/storage-driver-s3` package, corresponding to version 11.5.0 of Directus, fixes the issue.

In Tor before 0.3.3.12, 0.3.4.x before 0.3.4.11, 0.3.5.x before 0.3.5.8, and 0.4.x before 0.4.0.2-alpha, remote denial of service against Tor clients and relays can occur via memory exhaustion in the KIST cell scheduler.

Discourse is an open source discussion platform. Prior to version 3.0.6 of the `stable` branch and version 3.1.0.beta7 of the `beta` and `tests-passed` branches, in multiple controller actions, Discourse accepts limit params but does not impose any upper bound on the values being accepted. Without an upper bound, the software may allow arbitrary users to generate DB queries which may end up exhausting the resources on the server. The issue is patched in version 3.0.6 of the `stable` branch and version 3.1.0.beta7 of the `beta` and `tests-passed` branches. There are no known workarounds for this vulnerability.

Django 1.11.x before 1.11.19, 2.0.x before 2.0.11, and 2.1.x before 2.1.6 allows Uncontrolled Memory Consumption via a malicious attacker-supplied value to the django.utils.numberformat.format() function.

Mastodon is a self-hosted, federated microblogging platform. Starting in version 4.2.0 and prior to versions 4.2.16 and 4.3.4, the rate limits are missing on `/auth/setup`. Without those rate limits, an attacker can craft requests that will send an email to an arbitrary addresses. Versions 4.2.16 and 4.3.4 fix the issue.

In Node.js including 6.x before 6.17.0, 8.x before 8.15.1, 10.x before 10.15.2, and 11.x before 11.10.1, an attacker can cause a Denial of Service (DoS) by establishing an HTTP or HTTPS connection in keep-alive mode and by sending headers very slowly. This keeps the connection and associated resources alive for a long period of time. Potential attacks are mitigated by the use of a load balancer or other proxy layer. This vulnerability is an extension of CVE-2018-12121, addressed in November and impacts all active Node.js release lines including 6.x before 6.17.0, 8.x before 8.15.1, 10.x before 10.15.2, and 11.x before 11.10.1.

Kirby is a content management system. A vulnerability in versions prior to 3.5.8.3, 3.6.6.3, 3.7.5.2, 3.8.4.1, and 3.9.6 affects all Kirby sites with user accounts (unless Kirby's API and Panel are disabled in the config). The real-world impact of this vulnerability is limited, however we still recommend to update to one of the patch releases because they also fix more severe vulnerabilities. Kirby's authentication endpoint did not limit the password length. This allowed attackers to provide a password with a length up to the server's maximum request body length. Validating that password against the user's actual password requires hashing the provided password, which requires more CPU and memory resources (and therefore processing time) the longer the provided password gets. This could be abused by an attacker to cause the website to become unresponsive or unavailable. Because Kirby comes with a built-in brute force protection, the impact of this vulnerability is limited to 10 failed logins from each IP address and 10 failed logins for each existing user per hour. The problem has been patched in Kirby 3.5.8.3, 3.6.6.3, 3.7.5.2, 3.8.4.1, and 3.9.6. In all of the mentioned releases, the maintainers have added password length limits in the affected code so that passwords longer than 1000 bytes are immediately blocked, both when setting a password and when logging in.

Keep-alive HTTP and HTTPS connections can remain open and inactive for up to 2 minutes in Node.js 6.16.0 and earlier. Node.js 8.0.0 introduced a dedicated server.keepAliveTimeout which defaults to 5 seconds. The behavior in Node.js 6.16.0 and earlier is a potential Denial of Service (DoS) attack vector. Node.js 6.17.0 introduces server.keepAliveTimeout and the 5-second default.

IBM WebSphere Application Server 7.0, 8.0, 8.5, and 9.0 is vulnerable to a denial of service, caused by sending a specially-crafted request. A remote attacker could exploit this vulnerability to cause the server to consume all available memory. IBM X-Force ID: 172125.

IBM Security Guardium Big Data Intelligence 4.0 (SonarG) does not properly restrict the size or amount of resources that are requested or influenced by an actor. This weakness can be used to consume more resources than intended. IBM X-Force ID: 161417.

XAPI open file limit DoS It is possible for an unauthenticated client on the network to cause XAPI to hit its file-descriptor limit. This causes XAPI to be unable to accept new requests for other (trusted) clients, and blocks XAPI from carrying out any tasks that require the opening of file descriptors.

An issue was discovered in Mattermost Server before 5.8.0, 5.7.2, 5.6.5, and 4.10.7. It allows attackers to cause a denial of service (memory consumption) via OpenGraph.

Dell PowerScale OneFS, versions 9.5.0.0 through 9.10.0.0, contains an uncontrolled resource consumption vulnerability. An unauthenticated attacker with remote access could potentially exploit this vulnerability, leading to denial of service.

An issue was discovered in Foxit Reader and PhantomPDF before 9.7. It allows memory consumption because data is created for each page of an application level.

An issue was discovered in Foxit PhantomPDF before 8.3.12. It allows memory consumption because data is created for each page of an application level.

An issue was discovered in Mattermost Server before 5.18.0. It allows attackers to cause a denial of service (memory consumption) via a large Slack import.

Yeti bridges the gap between CTI and DFIR practitioners by providing a Forensics Intelligence platform and pipeline. Remote user-controlled data tags can reach a Unicode normalization with a compatibility form NFKD. Under Windows, such normalization is costly in resources and may lead to denial of service with attacks such as One Million Unicode payload. This can get worse with the use of special Unicode characters like U+2100 (℀), or U+2105 (℅) which could lead the payload size to be tripled. Versions prior to 2.1.11 are affected by this vulnerability. The patch is included in 2.1.11.

The ASN.1 parser in Bouncy Castle Crypto (aka BC Java) 1.63 can trigger a large attempted memory allocation, and resultant OutOfMemoryError error, via crafted ASN.1 data. This is fixed in 1.64.

idreamsoft iCMS 7.0.15 allows remote attackers to cause a denial of service (resource consumption) via a query for many comments, as demonstrated by the admincp.php?app=comment&perpage= substring followed by a large positive integer.

Cilium is a networking, observability, and security solution with an eBPF-based dataplane. A denial of service vulnerability affects versions 1.14.0 through 1.14.7, 1.15.0 through 1.15.11, and 1.16.0 through 1.16.4. In a Kubernetes cluster where Cilium is configured to proxy DNS traffic, an attacker can crash Cilium agents by sending a crafted DNS response to workloads from outside the cluster. For traffic that is allowed but without using DNS-based policy, the dataplane will continue to pass traffic as configured at the time of the DoS. For workloads that have DNS-based policy configured, existing connections may continue to operate, and new connections made without relying on DNS resolution may continue to be established, but new connections which rely on DNS resolution may be disrupted. Any configuration changes that affect the impacted agent may not be applied until the agent is able to restart. This issue is fixed in Cilium v1.14.18, v1.15.12, and v1.16.5. No known workarounds are available.

A vulnerability in the interactions between the DHCP and TFTP features for Cisco Small Business 300 Series (Sx300) Managed Switches could allow an unauthenticated, remote attacker to cause the device to become low on system memory, which in turn could lead to an unexpected reload of the device and result in a denial of service (DoS) condition on an affected device. The vulnerability is due to a failure to free system memory when an unexpected DHCP request is received. An attacker could exploit this vulnerability by sending a crafted DHCP packet to the targeted device. A successful exploit could allow the attacker to cause an unexpected reload of the device.

In Puma before versions 3.12.2 and 4.3.1, a poorly-behaved client could use keepalive requests to monopolize Puma's reactor and create a denial of service attack. If more keepalive connections to Puma are opened than there are threads available, additional connections will wait permanently if the attacker sends requests frequently enough. This vulnerability is patched in Puma 4.3.1 and 3.12.2.

CometBFT is a Byzantine Fault Tolerant (BFT) middleware that takes a state transition machine and replicates it on many machines. An internal modification made in versions 0.34.28 and 0.37.1 to the way struct `PeerState` is serialized to JSON introduced a deadlock when new function MarshallJSON is called. This function can be called from two places. The first is via logs, setting the `consensus` logging module to "debug" level (should not happen in production), and setting the log output format to JSON. The second is via RPC `dump_consensus_state`. Case 1, which should not be hit in production, will eventually hit the deadlock in most goroutines, effectively halting the node. In case 2, only the data structures related to the first peer will be deadlocked, together with the thread(s) dealing with the RPC request(s). This means that only one of the channels of communication to the node's peers will be blocked. Eventually the peer will timeout and excluded from the list (typically after 2 minutes). The goroutines involved in the deadlock will not be garbage collected, but they will not interfere with the system after the peer is excluded. The theoretical worst case for case 2, is a network with only two validator nodes. In this case, each of the nodes only has one `PeerState` struct. If `dump_consensus_state` is called in either node (or both), the chain will halt until the peer connections time out, after which the nodes will reconnect (with different `PeerState` structs) and the chain will progress again. Then, the same process can be repeated. As the number of nodes in a network increases, and thus, the number of peer struct each node maintains, the possibility of reproducing the perturbation visible with two nodes decreases. Only the first `PeerState` struct will deadlock, and not the others (RPC `dump_consensus_state` accesses them in a for loop, so the deadlock at the first iteration causes the rest of the iterations of that "for" loop to never be reached). This regression was fixed in versions 0.34.29 and 0.37.2. Some workarounds are available. For case 1 (hitting the deadlock via logs), either don't set the log output to "json", leave at "plain", or don't set the consensus logging module to "debug", leave it at "info" or higher. For case 2 (hitting the deadlock via RPC `dump_consensus_state`), do not expose `dump_consensus_state` RPC endpoint to the public internet (e.g., via rules in one's nginx setup).

A vulnerability in the UDP protocol implementation for Cisco IoT Field Network Director (IoT-FND) could allow an unauthenticated, remote attacker to exhaust system resources, resulting in a denial of service (DoS) condition. The vulnerability is due to improper resource management for UDP ingress packets. An attacker could exploit this vulnerability by sending a high rate of UDP packets to an affected system within a short period of time. A successful exploit could allow the attacker to exhaust available system resources, resulting in a DoS condition.

An issue was discovered in GitLab Community and Enterprise Edition through 12.2.1. Under certain circumstances, CI pipelines could potentially be used in a denial of service attack.

An issue was discovered in Pillow before 6.2.0. When reading specially crafted invalid image files, the library can either allocate very large amounts of memory or take an extremely long period of time to process the image.

An issue was discovered in GitLab Community and Enterprise Edition 8.15 through 12.2.1. Particular mathematical expressions in GitLab Markdown can exhaust client resources.

An issue was discovered in the protobuf crate before 2.6.0 for Rust. Attackers can exhaust all memory via Vec::reserve calls.