InHand Networks InRouter 900 Industrial 4G Router before v1.0.0.r11700 was discovered to contain a remote code execution (RCE) vulnerability via the function sub_12168. This vulnerability is triggered via a crafted packet.

InHand Networks InRouter 900 Industrial 4G Router before v1.0.0.r11700 was discovered to contain a remote code execution (RCE) vulnerability via the component get_cgi_from_memory. This vulnerability is triggered via a crafted packet.

InHand Networks InRouter 900 Industrial 4G Router before v1.0.0.r11700 was discovered to contain a remote code execution (RCE) vulnerability via the function sub_10F2C. This vulnerability is triggered via a crafted packet.

InHand Networks InRouter 900 Industrial 4G Router before v1.0.0.r11700 was discovered to contain a remote code execution (RCE) vulnerability via the component ipsec_secrets. This vulnerability is triggered via a crafted packet.

InHand Networks InRouter 900 Industrial 4G Router before v1.0.0.r11700 was discovered to contain a remote code execution (RCE) vulnerability via the function sub_12028. This vulnerability is triggered via a crafted packet.

InHand Networks InRouter 900 Industrial 4G Router before v1.0.0.r11700 was discovered to contain a remote code execution (RCE) vulnerability via the function sub_122D0. This vulnerability is triggered via a crafted packet.

InHand Networks InRouter 900 Industrial 4G Router before v1.0.0.r11700 was discovered to contain a remote code execution (RCE) vulnerability via the function sub_1791C. This vulnerability is triggered via a crafted packet.

InHand Networks InRouter 900 Industrial 4G Router before v1.0.0.r11700 was discovered to contain a remote code execution (RCE) vulnerability via the component python-lib. This vulnerability is triggered via a crafted packet.

InHand Networks InRouter 900 Industrial 4G Router before v1.0.0.r11700 was discovered to contain a remote code execution (RCE) vulnerability via the component config_ovpn. This vulnerability is triggered via a crafted packet.

The firmware of InHand Networks InRouter302 V3.5.45 introduces fixes for TALOS-2022-1472 and TALOS-2022-1474. The fixes are incomplete. An attacker can still perform, respectively, a privilege escalation and an information disclosure vulnerability.

InHand Networks IR615 Router's Versions 2.3.0.r4724 and 2.3.0.r4870 have has no account lockout policy configured for the login page of the product. This may allow an attacker to execute a brute-force password attack with no time limitation and without harming the normal operation of the user. This could allow an attacker to gain valid credentials for the product interface.

UnboundID LDAP SDK version from commit 801111d8b5c732266a5dbd4b3bb0b6c7b94d7afb up to commit 8471904a02438c03965d21367890276bc25fa5a6, where the issue was reported and fixed contains an Incorrect Access Control vulnerability in process function in SimpleBindRequest class doesn't check for empty password when running in synchronous mode. commit with applied fix https://github.com/pingidentity/ldapsdk/commit/8471904a02438c03965d21367890276bc25fa5a6#diff-f6cb23b459be1ec17df1da33760087fd that can result in Ability to impersonate any valid user. This attack appear to be exploitable via Providing valid username and empty password against servers that do not do additional validation as per https://tools.ietf.org/html/rfc4513#section-5.1.1. This vulnerability appears to have been fixed in after commit 8471904a02438c03965d21367890276bc25fa5a6.

Weak Password Requirements in GitHub repository polonel/trudesk prior to 1.2.2.

Weak default root user credentials allow remote attackers to easily obtain OS superuser privileges over the open TCP port for SSH.

The TIBCO EBX Web Server component of TIBCO Software Inc.'s TIBCO EBX, TIBCO EBX, TIBCO EBX, and TIBCO Product and Service Catalog powered by TIBCO EBX contains a vulnerability that under certain specific conditions allows an attacker to enter a password other than the legitimate password and it will be accepted as valid. Affected releases are TIBCO Software Inc.'s TIBCO EBX: versions 5.8.123 and below, TIBCO EBX: versions 5.9.3, 5.9.4, 5.9.5, 5.9.6, 5.9.7, 5.9.8, 5.9.9, 5.9.10, 5.9.11, 5.9.12, 5.9.13, and 5.9.14, TIBCO EBX: versions 6.0.0 and 6.0.1, and TIBCO Product and Service Catalog powered by TIBCO EBX: version 1.0.0.

The NETGEAR Insight application before 2.42 for Android and iOS is affected by password mismanagement.

Vasion Print (formerly PrinterLogic) before Virtual Appliance Host 22.0.843 Application 20.0.1923 allows Weak Password Encryption / Encoding OVE-20230524-0007.

Weak password requirements in OpenC3 COSMOS v6.0.0 allow attackers to bypass authentication via a brute force attack.

I-doit pro 25 and below and I-doit open 25 and below employ weak password requirements for Administrator account creation. Attackers are able to easily guess users' passwords via a bruteforce attack.

Weak password requirements issue exists in CHOCO TEI WATCHER mini (IB-MCT001) all versions. If this issue is exploited, a brute-force attack may allow an attacker unauthorized access and login.

An issue in the password change function of Silverpeas v6.4.2 and lower allows for the bypassing of password complexity requirements.

IBM Security Guardium 10.0, 10.0.1, and 10.1 through 10.1.4 Database Activity Monitor does not require that users should have strong passwords by default, which makes it easier for attackers to compromise user accounts. IBM X-Force ID: 132624.

In Gradle Enterprise before 2023.1, a remote attacker may be able to gain access to a new installation (in certain installation scenarios) because of a non-unique initial system user password. Although this password must be changed upon the first login, it is possible that an attacker logs in before the legitimate administrator logs in.

The Epson "EasyMP" software is designed to remotely stream a users computer to supporting projectors.These devices are authenticated using a unique 4-digit code, displayed on-screen - ensuring only those who can view it are streaming.All Epson projectors supporting the "EasyMP" software are vulnerable to a brute-force vulnerability, allowing any attacker on the network to remotely control and stream to the vulnerable device

In Moxa EDS-G516E Series firmware, Version 5.2 or lower, weak password requirements may allow an attacker to gain access using brute force.

In Moxa PT-7528 series firmware, Version 4.0 or lower, and PT-7828 series firmware, Version 3.9 or lower, the application utilizes weak password requirements, which may allow an attacker to gain unauthorized access.

HCL Compass is vulnerable to insecure password requirements. An attacker could easily guess the password and gain access to user accounts.

In IQrouter through 3.3.1, the Lua function reset_password in the web-panel allows remote attackers to change the root password arbitrarily. Note: The vendor claims that this vulnerability can only occur on a brand-new network that, after initiating the forced initial configuration (which has a required step for setting a secure password on the system), makes this CVE invalid. This vulnerability is “true for any unconfigured release of OpenWRT, and true of many other new Linux distros prior to being configured for the first time”

Airangel HSMX Gateway devices through 5.2.04 have Weak SSH Credentials.

An issue was discovered in AvertX Auto focus Night Vision HD Indoor/Outdoor IP Dome Camera HD838 and Night Vision HD Indoor/Outdoor Mini IP Bullet Camera HD438. They do not require users to change the default password for the admin account. They only show a pop-up window suggesting a change but there's no enforcement. An administrator can click Cancel and proceed to use the device without changing the password. Additionally, they disclose the default username within the login.js script. Since many attacks for IoT devices, including malware and exploits, are based on the usage of default credentials, it makes these cameras an easy target for malicious actors.

Weak Password Requirements vulnerability in Apache Software Foundation Apache InLong.This issue affects Apache InLong: from 1.1.0 through 1.6.0.  When users change their password to a simple password (with any character or symbol), attackers can easily guess the user's password and access the account. Users are advised to upgrade to Apache InLong's 1.7.0 or cherry-pick https://github.com/apache/inlong/pull/7805 https://github.com/apache/inlong/pull/7805 to solve it.

Versions of the Official registry Docker images through 2.7.0 contain a blank password for the root user. Systems deployed using affected versions of the registry container may allow a remote attacker to achieve root access with a blank password.

An issue discovered in Pfsense CE version 2.6.0 allows attackers to compromise user accounts via weak password requirements.

Renato v0.17.0 employs weak password complexity requirements, allowing attackers to crack user passwords via brute-force attacks.

Askey AP5100W_Dual_SIG_1.01.097 and all prior versions use a weak password at the Operating System (rlx-linux) level. This allows an attacker to gain unauthorized access as an admin or root user to the device Operating System via Telnet or SSH.

The built-in web service for MOXA NPort IAW5000A-I/O firmware version 2.1 or lower does not require users to have strong passwords.

An issue was discovered on Connectize AC21000 G6 641.139.1.1256 allows attackers to gain escalated privileges on the device via poor credential management.

Victure RX1800 EN_V1.0.0_r12_110933 was discovered to utilize a weak default password which includes the last 8 digits of the Mac address.

Western Digital My Cloud, My Cloud Mirror Gen2, My Cloud EX2 Ultra, My Cloud EX2100, My Cloud EX4100, My Cloud DL2100, My Cloud DL4100, My Cloud PR2100 and My Cloud PR4100 firmware before 2.31.174 is affected by an authentication bypass vulnerability. The login_mgr.cgi file checks credentials against /etc/shadow. However, the "nobody" account (which can be used to access the control panel API as a low-privilege logged-in user) has a default empty password, allowing an attacker to modify the My Cloud EX2 Ultra web page source code and obtain access to the My Cloud as a non-Admin My Cloud device user.

Weak Password Requirements in GitHub repository modoboa/modoboa prior to 2.1.0.

An issue was discovered on Moxa MGate MB3170 and MB3270 devices before 4.1, MB3280 and MB3480 devices before 3.1, MB3660 devices before 2.3, and MB3180 devices before 2.1. Insufficient password requirements for the MGate web application may allow an attacker to gain access by brute-forcing account passwords.

Weak Password Requirements in GitHub repository janeczku/calibre-web prior to 0.6.20.

An issue was discovered on D-Link DIR-825 Rev.B 2.10 devices. The "user" account has a blank password.

Weak Password Requirements in GitHub repository thorsten/phpmyfaq prior to 3.1.12.

Weak default password cause vulnerability in SonicWall Email Security appliance which leads to attacker gain access to appliance database. This vulnerability affected Email Security Appliance version 10.0.2 and earlier.

IBM QRadar Network Packet Capture 7.3.0 - 7.3.3 Patch 1 and 7.4.0 GA does not require that users should have strong passwords by default, which makes it easier for attackers to compromise user accounts. IBM X-Force ID: 166803.

RSA Archer, versions prior to 6.6 P2 (6.6.0.2), contain an improper authentication vulnerability. The vulnerability allows sysadmins to create user accounts with insufficient credentials. Unauthenticated attackers could gain unauthorized access to the system using those accounts.

ECOA BAS controller uses weak set of default administrative credentials that can be easily guessed in remote password attacks and gain full control of the system.

NeuVector 3.1 when configured to allow authentication via Active Directory, does not enforce non-empty passwords which allows an attacker with access to the Neuvector portal to authenticate as any valid LDAP user by providing a valid username and an empty password (provided that the active directory server has not been configured to reject empty passwords).

Trend Micro Mobile Security for Android (Consumer) versions 10.3.1 and below on Android 8.0+ has an issue in which an attacker could bypass the product's App Password Protection feature.