A Heap Overflow vulnerability in WLInfoRailService component of Ivanti Avalanche before 6.4.3 allows a remote unauthenticated attacker to execute arbitrary commands

Certain NETGEAR devices are affected by command injection by an unauthenticated attacker. This affects XR300 before 1.0.3.68, R7000P before 1.3.3.140, and R6900P before 1.3.3.140.

An issue was discovered on D-Link DCS-1130 devices. The device provides a user with the capability of setting a SMB folder for the video clippings recorded by the device. It seems that the POST parameters passed in this request (to test if email credentials and hostname sent to the device work properly) result in being passed as commands to a "system" API in the function and thus result in command injection on the device. If the firmware version is dissected using binwalk tool, we obtain a cramfs-root archive which contains the filesystem set up on the device that contains all the binaries. The library "libmailutils.so" is the one that has the vulnerable function "sub_1FC4" that receives the values sent by the POST request. If we open this binary in IDA-pro we will notice that this follows an ARM little endian format. The function sub_1FC4 in IDA pro is identified to be receiving the values sent in the POST request and the value set in POST parameter "receiver1" is extracted in function "sub_15AC" which is then passed to the vulnerable system API call. The vulnerable library function is accessed in "cgibox" binary at address 0x0008F598 which calls the "mailLoginTest" function in "libmailutils.so" binary as shown below which results in the vulnerable POST parameter being passed to the library which results in the command injection issue.

A weakness has been identified in jishi node-sonos-http-api up to 3776f0ee2261c924c7b7204de121a38100a08ca7. Affected is the function Promise of the file lib/tts-providers/mac-os.js of the component TTS Provider. This manipulation of the argument phrase causes os command injection. It is possible to initiate the attack remotely. The exploit has been made available to the public and could be used for attacks. This product is using a rolling release to provide continious delivery. Therefore, no version details for affected nor updated releases are available. The project was informed of the problem early through an issue report but has not responded yet.

Totolink devices A3100R v4.1.2cu.5050_B20200504, A830R v5.9c.4729_B20191112, and A720R v4.1.5cu.470_B20200911 were discovered to contain command injection vulnerability in the function setNoticeCfg. This vulnerability allows attackers to execute arbitrary commands via the IpFrom parameter.

A vulnerability was identified in Wavlink WL-WN579A3 up to 20210219. Affected by this vulnerability is the function Delete_Mac_list of the file /cgi-bin/wireless.cgi. The manipulation of the argument delete_list leads to command injection. Remote exploitation of the attack is possible. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in Totolink X6000R AX3000 9.4.0cu.852_20230719. It has been rated as critical. This issue affects the function setWizardCfg of the file /cgi-bin/cstecgi.cgi of the component shttpd. The manipulation leads to command injection. The exploit has been disclosed to the public and may be used. The identifier VDB-254573 was assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A command injection vulnerability in the function updateWifiInfo of TOTOLINK Technology routers T6 V3_Firmware T6_V3_V4.1.5cu.748_B20211015 and T10 V2_Firmware V4.1.8cu.5207_B20210320 allows attackers to execute arbitrary commands via a crafted MQTT packet.

Tenda routers G1 and G3 v15.11.0.17(9502)_CN were discovered to contain a command injection vulnerability in the function formSetIpSecTunnel. This vulnerability allows attackers to execute arbitrary commands via the IPsecLocalNet and IPsecRemoteNet parameters.

A vulnerability, which was classified as critical, has been found in DrayTek Vigor2960 and Vigor300B 1.5.1.3/1.5.1.4. This issue affects some unknown processing of the file /cgi-bin/mainfunction.cgi/apmcfgupptim of the component Web Management Interface. The manipulation of the argument session leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 1.5.1.5 is able to address this issue. It is recommended to upgrade the affected component.

Cursor is a code editor built for programming with AI. Prior to 2.3, hen the Cursor Agent is running in Auto-Run Mode with Allowlist mode enabled, certain shell built-ins can still be executed without appearing in the allowlist and without requiring user approval. This allows an attacker via indirect or direct prompt injection to poison the shell environment by setting, modifying, or removing environment variables that influence trusted commands. This vulnerability is fixed in 2.3.

Tenda routers G1 and G3 v15.11.0.17(9502)_CN were discovered to contain a command injection vulnerability in the function formSetIpGroup. This vulnerability allows attackers to execute arbitrary commands via the IPGroupStartIP and IPGroupEndIP parameters.

The downloadFlile.cgi binary file in TOTOLINK EX200 V4.0.3c.7646_B20201211 has a command injection vulnerability when receiving GET parameters. The parameter name can be constructed for unauthenticated command execution.

Improper Neutralization of Special Elements used in a Command vulnerability allows OS Command Injection via RCE. This issue affects Pandora FMS from 700 to 777.6 .

A vulnerability, which was classified as critical, was found in DrayTek Vigor2960 and Vigor300B 1.5.1.4. Affected is an unknown function of the file /cgi-bin/mainfunction.cgi/apmcfgupload of the component Web Management Interface. The manipulation of the argument session leads to os command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 1.5.1.5 is able to address this issue. It is recommended to upgrade the affected component.

A critical vulnerability has been discovered in Privileged Remote Access (PRA) and Remote Support (RS) products which can allow an unauthenticated attacker to inject commands that are run as a site user.

iTextPDF in iText 7 and up to (excluding 4.4.13.3) 7.1.17 allows command injection via a CompareTool filename that is mishandled on the gs (aka Ghostscript) command line in GhostscriptHelper.java.

Deno is a JavaScript, TypeScript, and WebAssembly runtime. Before 2.5.6, a prior patch aimed to block spawning Windows batch/shell files by returning an error when a spawned path’s extension matched .bat or .cmd. That check performs a case-sensitive comparison against lowercase literals and therefore can be bypassed when the extension uses alternate casing (for example .BAT, .Bat, etc.). This vulnerability is fixed in 2.5.6.

A vulnerability was detected in Great Developers Certificate Generation System up to 97171bb0e5e22e52eacf4e4fa81773e5f3cffb73. This vulnerability affects unknown code of the file /restructured/csv.php. The manipulation of the argument photo results in os command injection. The attack can be executed remotely. This product implements a rolling release for ongoing delivery, which means version information for affected or updated releases is unavailable. The code repository of the project has not been active for many years.

EnerSys AMPA versions 24.04 through 24.16, inclusive, are vulnerable to command injection leading to privileged remote shell access.

A Remote Code Execution (RCE) vulnerability exists in Ruijie Networks Ruijie RG-EW Series Routers up to ReyeeOS 1.55.1915 / EW_3.0(1)B11P55 via the checkNet function in /cgi-bin/luci/api/auth.

An attacker may inject commands via specially-crafted post requests.

EnerSys AMPA 22.09 and prior versions are vulnerable to command injection leading to privileged remote shell access.

The shell-quote package before 1.7.3 for Node.js allows command injection. An attacker can inject unescaped shell metacharacters through a regex designed to support Windows drive letters. If the output of this package is passed to a real shell as a quoted argument to a command with exec(), an attacker can inject arbitrary commands. This is because the Windows drive letter regex character class is {A-z] instead of the correct {A-Za-z]. Several shell metacharacters exist in the space between capital letter Z and lower case letter a, such as the backtick character.

An issue was discovered in Zammad before 4.1.1. Command Injection can occur via custom Packages.

A vulnerability was determined in Sangfor Operation and Maintenance Security Management System up to 3.0.12. This impacts the function getInformation of the file /equipment/get_Information of the component HTTP POST Request Handler. Executing a manipulation of the argument fortEquipmentIp can lead to command injection. The attack can be launched remotely. The exploit has been publicly disclosed and may be utilized.

A weakness has been identified in D-Link DIR-823X 250416. Affected by this issue is the function sub_412E7C of the file /goform/set_wifidog_settings. Executing a manipulation of the argument wd_enable can lead to command injection. The attack can be executed remotely. The exploit has been made available to the public and could be used for attacks.

A vulnerability, which was classified as critical, has been found in json-logic-js 2.0.0. Affected by this issue is some unknown functionality of the file logic.js. The manipulation leads to command injection. Upgrading to version 2.0.1 is able to address this issue. The patch is identified as c1dd82f5b15d8a553bb7a0cfa841ab8a11a9c227. It is recommended to upgrade the affected component. VDB-222266 is the identifier assigned to this vulnerability.

A vulnerability was found in D-Link DI-8003 16.07.16A1. It has been classified as critical. Affected is the function upgrade_filter_asp of the file /upgrade_filter.asp. The manipulation of the argument path leads to os command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.

Arbitrary commands execution on the server by exploiting a command injection vulnerability in the LDAP authentication mechanism. This issue affects Pandora FMS: from 700 through <=777.4

A vulnerability was found in Sangfor Operation and Maintenance Security Management System up to 3.0.12. This affects the function portValidate of the file /fort/ip_and_port/port_validate of the component HTTP POST Request Handler. Performing a manipulation of the argument port results in command injection. The attack can be initiated remotely. The exploit has been made public and could be used.

Improper neutralization of special elements used in an OS command ('OS Command Injection') vulnerability in Task Manager component in Synology BeePhotos before 1.0.2-10026 and 1.1.0-10053 and Synology Photos before 1.6.2-0720 and 1.7.0-0795 allows remote attackers to execute arbitrary code via unspecified vectors.

HP OpenView Network Node Manager 6.2 through 7.50 allows remote attackers to execute arbitrary commands via shell metacharacters in the (1) node parameter to connectedNodes.ovpl, (2) cdpView.ovpl, (3) freeIPaddrs.ovpl, and (4) ecscmg.ovpl.

PHP remote file inclusion vulnerability in welcome.php in phpLDAPadmin 0.9.6 and 0.9.7 allows remote attackers to execute arbitrary PHP code via the custom_welcome_page parameter.

Improper Control of Generation of Code ('Code Injection'), Improper Neutralization of Special Elements used in a Command ('Command Injection'), Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability in BG-TEK Informatics Security Technologies CoslatV3 allows Command Injection, Privilege Escalation.This issue affects CoslatV3: through 3.1069. NOTE: The vendor was contacted and it was learned that the product is not supported.

A vulnerability was determined in Tosei Online Store Management System ネット店舗管理システム 1.01. The affected element is an unknown function of the file /cgi-bin/imode_alldata.php. Executing a manipulation of the argument DevId can lead to command injection. The attack can be executed remotely. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way.

A security flaw has been discovered in Ziroom ZHOME A0101 1.0.1.0. This issue affects the function macAddrClone of the file luci\controller\api\zrMacClone.lua. The manipulation of the argument macType results in command injection. The attack may be launched remotely. The exploit has been released to the public and may be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability has been found in Sangfor Operation and Maintenance Security Management System up to 3.0.12. The impacted element is an unknown function of the file /fort/audit/get_clip_img of the component HTTP POST Request Handler. Such manipulation of the argument frame/dirno leads to command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.

TP-Link Tapo C200 IP camera, on its 1.1.15 firmware version and below, is affected by an unauthenticated RCE vulnerability, present in the uhttpd binary running by default as root. The exploitation of this vulnerability allows an attacker to take full control of the camera.

A vulnerability has been found in Tenda AC6 15.03.05.19 and classified as critical. Affected by this vulnerability is the function formWriteFacMac of the file /goform/WriteFacMac of the component API Endpoint. The manipulation of the argument mac leads to command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used.

SystemK NVR 504/508/516 versions 2.3.5SK.30084998 and prior are vulnerable to a command injection vulnerability in the dynamic domain name system (DDNS) settings that could allow an attacker to execute arbitrary commands with root privileges.

A vulnerability was identified in Sangfor Operation and Maintenance Management System up to 3.0.12. Affected by this issue is the function SessionController of the file /isomp-protocol/protocol/session of the component SSH Protocol Handler. The manipulation of the argument keypassword leads to os command injection. It is possible to initiate the attack remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way.

A weakness has been identified in Tenda HG10 US_HG7_HG9_HG10re_300001138_en_xpon. Impacted is an unknown function of the file /boaform/formSamba of the component Boa Webserver. Executing a manipulation of the argument serverString can lead to command injection. It is possible to launch the attack remotely. The exploit has been made available to the public and could be used for attacks.

Eclipse Target Management: Terminal and Remote System Explorer (RSE) version <= 4.5.400 has a remote code execution vulnerability that does not require authentication. The fixed version is included in Eclipse IDE 2024-03

A security vulnerability has been detected in D-Link DIR-852 1.00CN B09. Impacted is the function soapcgi_main of the file soap.cgi of the component SOAP Service. Such manipulation of the argument service leads to os command injection. The attack can be launched remotely. The exploit has been disclosed publicly and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

An issue was discovered in D-Link DIR-816 DIR-816A2_FWv1.10CNB05_R1B011D88210 The HTTP request parameter is used in the handler function of /goform/form2userconfig.cgi route, which can construct the user name string to delete the user function. This can lead to command injection through shell metacharacters.

A vulnerability was determined in Telesquare TLR-2005KSH 1.2.4. The affected element is an unknown function of the file /cgi-bin/internet.cgi?Command=lanCfg. Executing manipulation of the argument Hostname can lead to command injection. The attack may be performed from a remote location. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability classified as critical was found in TOTOLINK EX1800T 9.1.0cu.2112_B20220316. This vulnerability affects the function setRebootScheCfg of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument mode/week/minute/recHour leads to os command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used.

In Versa Director, the command injection is an attack in which the goal is execution of arbitrary commands on the host operating system via a vulnerable application. Command injection attacks are possible when an application passes unsafe user supplied data (forms, cookies, HTTP headers etc.) to a system shell. In this attack, the attacker-supplied operating system commands are usually executed with the privileges of the vulnerable application. Command injection attacks are possible largely due to insufficient input validation.

A weakness has been identified in D-Link DIR-816L 206b01. Affected by this issue is the function soapcgi_main of the file /soap.cgi. This manipulation of the argument service causes os command injection. Remote exploitation of the attack is possible. The exploit has been made available to the public and could be exploited. This vulnerability only affects products that are no longer supported by the maintainer.