In Apache Thrift all versions up to and including 0.12.0, a server or client may run into an endless loop when feed with specific input data. Because the issue had already been partially fixed in version 0.11.0, depending on the installed version it affects only certain language bindings.

In Contiki 3.0, a Telnet server that silently quits (before disconnection with clients) leads to connected clients entering an infinite loop and waiting forever, which may cause excessive CPU consumption.

Stack consumption vulnerability in the dissect_ber_choice function in the BER dissector in Wireshark 1.2.x through 1.2.15 and 1.4.x through 1.4.4 might allow remote attackers to cause a denial of service (infinite loop) via vectors involving self-referential ASN.1 CHOICE values.

An infinite loop in SMLLexer in Pygments versions 1.5 to 2.7.3 may lead to denial of service when performing syntax highlighting of a Standard ML (SML) source file, as demonstrated by input that only contains the "exception" keyword.

Loop with unreachable exit condition may occur due to improper handling of unsupported input in Snapdragon Auto, Snapdragon Compute, Snapdragon Connectivity, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon IoT, Snapdragon Voice & Music, Snapdragon Wearables

Improper file stream access in /desktop_app/file.ajax.php?action=uploadfile in Bitrix24 22.0.300 allows unauthenticated remote attackers to cause denial-of-service via a crafted "tmp_url".

A flaw was found in undertow. This issue makes achieving a denial of service possible due to an unexpected handshake status updated in SslConduit, where the loop never terminates.

Certain WithSecure products allow a Denial of Service because the engine scanner can go into an infinite loop when processing an archive file. This affects WithSecure Client Security 15, WithSecure Server Security 15, WithSecure Email and Server Security 15, WithSecure Elements Endpoint Protection 17 and later, WithSecure Client Security for Mac 15, WithSecure Elements Endpoint Protection for Mac 17 and later, WithSecure Linux Security 64 12.0, WithSecure Linux Protection 12.0, and WithSecure Atlant 1.0.35-1.

In Contiki 3.0, potential nonterminating acknowledgment loops exist in the Telnet service. When the negotiated options are already disabled, servers still respond to DONT and WONT requests with WONT or DONT commands, which may lead to infinite acknowledgment loops, denial of service, and excessive CPU consumption.

OctoRPKI does not limit the depth of a certificate chain, allowing for a CA to create children in an ad-hoc fashion, thereby making tree traversal never end.

When calling bson_utf8_validate on some inputs a loop with an exit condition that cannot be reached may occur, i.e. an infinite loop. This issue affects All MongoDB C Driver versions prior to versions 1.25.0.

Loop with Unreachable Exit Condition ('Infinite Loop') vulnerability in Apache NimBLE.  Specially crafted GATT operation can cause infinite loop in GATT server leading to denial of service in Bluetooth stack or device. This issue affects Apache NimBLE: through 1.6.0. Users are recommended to upgrade to version 1.7.0, which fixes the issue.

In Wireshark 2.2.0 to 2.2.12 and 2.4.0 to 2.4.4, the DMP dissector could go into an infinite loop. This was addressed in epan/dissectors/packet-dmp.c by correctly supporting a bounded number of Security Categories for a DMP Security Classification.

Transient DOS when NAS receives ODAC criteria of length 1 and type 1 in registration accept OTA.

A flaw was found in libXpm. This issue occurs when parsing a file with a comment not closed; the end-of-file condition will not be detected, leading to an infinite loop and resulting in a Denial of Service in the application linked to the library.

qubes-mirage-firewall (aka Mirage firewall for QubesOS) 0.8.x through 0.8.3 allows guest OS users to cause a denial of service (CPU consumption and loss of forwarding) via a crafted multicast UDP packet (IP address range of 224.0.0.0 through 239.255.255.255).

NLnet Labs Unbound version 1.18.0 up to and including version 1.19.1 contain a vulnerability that can cause denial of service by a certain code path that can lead to an infinite loop. Unbound 1.18.0 introduced a feature that removes EDE records from responses with size higher than the client's advertised buffer size. Before removing all the EDE records however, it would try to see if trimming the extra text fields on those records would result in an acceptable size while still retaining the EDE codes. Due to an unchecked condition, the code that trims the text of the EDE records could loop indefinitely. This happens when Unbound would reply with attached EDE information on a positive reply and the client's buffer size is smaller than the needed space to include EDE records. The vulnerability can only be triggered when the 'ede: yes' option is used; non default configuration. From version 1.19.2 on, the code is fixed to avoid looping indefinitely.

A flaw was found in python. An improperly handled HTTP response in the HTTP client code of python may allow a remote attacker, who controls the HTTP server, to make the client script enter an infinite loop, consuming CPU time. The highest threat from this vulnerability is to system availability.

Due to a mistake in libcurl's WebSocket code, a malicious server can send a particularly crafted packet which makes libcurl get trapped in an endless busy-loop. There is no other way for the application to escape or exit this loop other than killing the thread/process. This might be used to DoS libcurl-using application.

An infinite loop in Open Robotics ros_comm XMLRPC server in ROS Melodic through 1.4.11 and ROS Noetic through1.15.11 allows remote attackers to cause a Denial of Service in ros_comm via a crafted XMLRPC call.

An issue was discovered in the demo/LINUXTCP implementation of cwalter-at freemodbus v.2018-09-12 allowing attackers to reach an infinite loop via a crafted length value for a packet.

ImageMagick is free and open-source software used for editing and manipulating digital images. In versions prior to 7.1.2-0, infinite lines occur when writing during a specific XMP file conversion command. Version 7.1.2-0 fixes the issue.

A vulnerability in Drupal Core allows Excessive Allocation.This issue affects Drupal Core: from 10.2.0 before 10.2.2, from 10.1.0 before 10.1.8.

jsoup is a Java library for working with HTML. Those using jsoup versions prior to 1.14.2 to parse untrusted HTML or XML may be vulnerable to DOS attacks. If the parser is run on user supplied input, an attacker may supply content that causes the parser to get stuck (loop indefinitely until cancelled), to complete more slowly than usual, or to throw an unexpected exception. This effect may support a denial of service attack. The issue is patched in version 1.14.2. There are a few available workarounds. Users may rate limit input parsing, limit the size of inputs based on system resources, and/or implement thread watchdogs to cap and timeout parse runtimes.

There is a defect in the CPython “tarfile” module affecting the “TarFile” extraction and entry enumeration APIs. The tar implementation would process tar archives with negative offsets without error, resulting in an infinite loop and deadlock during the parsing of maliciously crafted tar archives. This vulnerability can be mitigated by including the following patch after importing the “tarfile” module:  https://gist.github.com/sethmlarson/1716ac5b82b73dbcbf23ad2eff8b33e1

When reading a specially crafted 7Z archive, the construction of the list of codecs that decompress an entry can result in an infinite loop. This could be used to mount a denial of service attack against services that use Compress' sevenz package.

An issue was discovered in the CentralAuth extension in MediaWiki through 1.36. The Special:GlobalRenameRequest page is vulnerable to infinite loops and denial of service attacks when a user's current username is beyond an arbitrary maximum configuration value (MaxNameChars).

DOCSIS dissector crash in Wireshark 4.2.0 allows denial of service via packet injection or crafted capture file

An infinite loop issue discovered in Mathtex 1.05 and before allows a remote attackers to consume CPU resources via crafted string in the application URL.

golang.org/x/net before v0.0.0-20210520170846-37e1c6afe023 allows attackers to cause a denial of service (infinite loop) via crafted ParseFragment input.

QEMU can have an infinite loop in hw/rdma/vmw/pvrdma_dev_ring.c because return values are not checked (and -1 is mishandled).

ModularSquareRoot in Crypto++ (aka cryptopp) through 8.9.0 allows attackers to cause a denial of service (infinite loop) via crafted DER public-key data associated with squared odd numbers, such as the square of 268995137513890432434389773128616504853.

An issue was discovered in tcp_pulloutofband() in tcp_in.c in HCC embedded InterNiche 4.0.1. The TCP out-of-band urgent-data processing function invokes a panic function if the pointer to the end of the out-of-band data points outside of the TCP segment's data. If the panic function hadn't a trap invocation removed, it will enter an infinite loop and therefore cause DoS (continuous loop or a device reset).

When reading binary Ion data through Amazon.IonDotnet using the RawBinaryReader class, Amazon.IonDotnet does not check the number of bytes read from the underlying stream while deserializing the binary format. If the Ion data is malformed or truncated, this triggers an infinite loop condition that could potentially result in a denial of service. Users should upgrade to Amazon.IonDotnet version 1.3.1 and ensure any forked or derivative code is patched to incorporate the new fixes.

This vulnerability allows any attacker to cause the PeerTube server to stop responding to requests due to an infinite loop in the "inbox" endpoint when receiving crafted ActivityPub activities.

An improper handing of overflow in the UTF-8 decoder with supplementary characters can lead to an infinite loop in the decoder causing a Denial of Service. Versions Affected: Apache Tomcat 9.0.0.M9 to 9.0.7, 8.5.0 to 8.5.30, 8.0.0.RC1 to 8.0.51, and 7.0.28 to 7.0.86.

The html package (aka x/net/html) through 2018-09-25 in Go mishandles <table><math><select><mi><select></table>, leading to an infinite loop during an html.Parse call because inSelectIM and inSelectInTableIM do not comply with a specification.

Pydantic is a data validation and settings management using Python type hinting. In affected versions passing either `'infinity'`, `'inf'` or `float('inf')` (or their negatives) to `datetime` or `date` fields causes validation to run forever with 100% CPU usage (on one CPU). Pydantic has been patched with fixes available in the following versions: v1.8.2, v1.7.4, v1.6.2. All these versions are available on pypi(https://pypi.org/project/pydantic/#history), and will be available on conda-forge(https://anaconda.org/conda-forge/pydantic) soon. See the changelog(https://pydantic-docs.helpmanual.io/) for details. If you absolutely can't upgrade, you can work around this risk using a validator(https://pydantic-docs.helpmanual.io/usage/validators/) to catch these values. This is not an ideal solution (in particular you'll need a slightly different function for datetimes), instead of a hack like this you should upgrade pydantic. If you are not using v1.8.x, v1.7.x or v1.6.x and are unable to upgrade to a fixed version of pydantic, please create an issue at https://github.com/samuelcolvin/pydantic/issues requesting a back-port, and we will endeavour to release a patch for earlier versions of pydantic.

StackStorm before 3.4.1, in some situations, has an infinite loop that consumes all available memory and disk space. This can occur if Python 3.x is used, the locale is not utf-8, and there is an attempt to log Unicode data (from an action or rule name).

cumulative-distribution-function is an open source npm library used which calculates statistical cumulative distribution function from data array of x values. In versions prior to 2.0.0 apps using this library on improper data may crash or go into an infinite-loop. In the case of a nodejs server-app using this library to act on invalid non-numeric data, the nodejs server may crash. This may affect other users of this server and/or require the server to be rebooted for proper operation. In the case of a browser app using this library to act on invalid non-numeric data, that browser may crash or lock up. A flaw enabling an infinite-loop was discovered in the code for evaluating the cumulative-distribution-function of input data. Although the documentation explains that numeric data is required, some users may confuse an array of strings like ["1","2","3","4","5"] for numeric data [1,2,3,4,5] when it is in fact string data. An infinite loop is possible when the cumulative-distribution-function is evaluated for a given point when the input data is string data rather than type `number`. This vulnerability enables an infinite-cpu-loop denial-of-service-attack on any app using npm:cumulative-distribution-function v1.0.3 or earlier if the attacker can supply malformed data to the library. The vulnerability could also manifest if a data source to be analyzed changes data type from Arrays of number (proper) to Arrays of string (invalid, but undetected by earlier version of the library). Users should upgrade to at least v2.0.0, or the latest version. Tests for several types of invalid data have been created, and version 2.0.0 has been tested to reject this invalid data by throwing a `TypeError()` instead of processing it. Developers using this library may wish to adjust their app's code slightly to better tolerate or handle this TypeError. Apps performing proper numeric data validation before sending data to this library should be mostly unaffected by this patch. The vulnerability can be mitigated in older versions by ensuring that only finite numeric data of type `Array[number]` or `number` is passed to `cumulative-distribution-function` and its `f(x)` function, respectively.

An issue was discovered in Pillow before 8.2.0. For FLI data, FliDecode did not properly check that the block advance was non-zero, potentially leading to an infinite loop on load.

An Improperly Implemented Security Check for Standard vulnerability in storm control of Juniper Networks Junos OS QFX5k devices allows packets to be punted to ARP queue causing a l2 loop resulting in a DDOS violations and DDOS syslog. This issue is triggered when Storm control is enabled and ICMPv6 packets are present on device. This issue affects Juniper Networks: Junos OS * All versions prior to 20.2R3-S6 on QFX5k; * 20.3 versions prior to 20.3R3-S5 on QFX5k; * 20.4 versions prior to 20.4R3-S5 on QFX5k; * 21.1 versions prior to 21.1R3-S4 on QFX5k; * 21.2 versions prior to 21.2R3-S3 on QFX5k; * 21.3 versions prior to 21.3R3-S2 on QFX5k; * 21.4 versions prior to 21.4R3 on QFX5k; * 22.1 versions prior to 22.1R3 on QFX5k; * 22.2 versions prior to 22.2R2 on QFX5k.

Certain WithSecure products allow an infinite loop in a scanning engine via unspecified file types. This affects WithSecure Client Security 15, WithSecure Server Security 15, WithSecure Email and Server Security 15, WithSecure Elements Endpoint Protection 17 and later, WithSecure Client Security for Mac 15, WithSecure Elements Endpoint Protection for Mac 17 and later, Linux Security 64 12.0 , Linux Protection 12.0, and WithSecure Atlant (formerly F-Secure Atlant) 1.0.35-1.

encoding/xml in Go before 1.15.9 and 1.16.x before 1.16.1 has an infinite loop if a custom TokenReader (for xml.NewTokenDecoder) returns EOF in the middle of an element. This can occur in the Decode, DecodeElement, or Skip method.

A vulnerability in aimhubio/aim version 3.19.3 allows an attacker to cause an infinite loop by configuring the remote tracking server to point at itself. This results in the server endlessly connecting to itself, rendering it unable to respond to other connections.

The web server in InterNiche NicheStack through 4.0.1 allows remote attackers to cause a denial of service (infinite loop and networking outage) via an unexpected valid HTTP request such as OPTIONS. This occurs because the HTTP request handler enters a miscoded wbs_loop() debugger hook.

Loop with Unreachable Exit Condition ('Infinite Loop') vulnerability in Sierra Wireless, Inc ALEOS could potentially allow a remote attacker to trigger a Denial of Service (DoS) condition for ACEManager without impairing other router functions. This condition is cleared by restarting the device.

A vulnerability has been identified in Capital Embedded AR Classic 431-422 (All versions), Capital Embedded AR Classic R20-11 (All versions < V2303), Nucleus NET (All versions), Nucleus ReadyStart V3 (All versions < V2017.02.4), Nucleus ReadyStart V4 (All versions < V4.1.0), Nucleus Source Code (All versions including affected IPv6 stack). The function that processes the Hop-by-Hop extension header in IPv6 packets and its options lacks any checks against the length field of the header, allowing attackers to put the function into an infinite loop by supplying arbitrary length values.