An issue was discovered in Mattermost Server before 4.0.0, 3.10.2, and 3.9.2. A password-reset request was sometime sent to an attacker-provided e-mail address.

A vulnerability, which was classified as critical, was found in Itech Job Portal Script 9.13. This affects an unknown part of the file /admin. The manipulation leads to improper authentication. It is possible to initiate the attack remotely.

The ComputePassword function in the Schneider Electric Quantum Ethernet Module on the NOE 771 device (aka the Quantum 140NOE771* module) generates the password for the fwupgrade account by performing a calculation on the MAC address, which makes it easier for remote attackers to obtain access via a (1) ARP request message or (2) Neighbor Solicitation message.

ProSoft Technology ICX35-HWC version 1.3 and prior cellular gateways contain an authentication bypass vulnerability in the web user interface that allows unauthenticated attackers to gain access to administrative functions without valid credentials. Attackers can bypass the authentication mechanism in affected firmware versions to obtain full administrative access to device configuration and settings.

A vulnerability in the TACACS+ authentication, authorization and accounting (AAA) feature of Cisco Enterprise NFV Infrastructure Software (NFVIS) could allow an unauthenticated, remote attacker to bypass authentication and log in to an affected device as an administrator. This vulnerability is due to incomplete validation of user-supplied input that is passed to an authentication script. An attacker could exploit this vulnerability by injecting parameters into an authentication request. A successful exploit could allow the attacker to bypass authentication and log in as an administrator to the affected device.

aEnrich a+HRD has improper validation for login function. An unauthenticated remote attacker can exploit this vulnerability to bypass authentication and access API function to perform arbitrary system command or disrupt service.

This vulnerability allows an attacker who has access to the WBM to read and write settings-parameters of the device by sending specifically constructed requests without authentication on multiple WAGO PLCs in firmware versions up to FW07.

The identity authentication bypass vulnerability found in some Dahua products during the login process. Attackers can bypass device identity authentication by constructing malicious data packets.

Some Dahua products have access control vulnerability in the password reset process. Attackers can exploit this vulnerability through specific deployments to reset device passwords.

Automation Direct CLICK PLC CPU Modules: C0-1x CPUs with firmware prior to v3.00 does not protect against additional software programming connections. An attacker can connect to the PLC while an existing connection is already active.

Delta Electronics DIAEnergie Version 1.7.5 and prior may allow an attacker to add a new administrative user without being authenticated or authorized, which may allow the attacker to log in and use the device with administrative privileges.

In Android before 2018-01-05 on Qualcomm Snapdragon IoT, Snapdragon Mobile, Snapdragon Automobile APQ8096AU, MDM9206, MDM9650, MSM8996AU, SD 210/SD 212/SD 205, SD 425, SD 430, SD 625, SD 650/52, SD 820, SD 835, it is possible for the XBL loader to skip the authentication of device config.

An authentication bypass in telnet server in BF-430 and BF431 232/422 TCP/IP Converter, BF-450M and SEMAC from CHIYU Technology Inc allows obtaining a privileged connection with the target device by supplying a specially malformed request and an attacker may force the remote telnet server to believe that the user has already authenticated.

OneOrZero Action & Information Management System (AIMS) 2.7.0 allows remote attackers to bypass authentication and obtain administrator privileges via a crafted oozimsrememberme cookie.

An issue was discovered in EMC Avamar Server 7.1.x, 7.2.x, 7.3.x, 7.4.x, 7.5.0; EMC NetWorker Virtual Edition (NVE) 9.0.x, 9.1.x, 9.2.x; and EMC Integrated Data Protection Appliance 2.0. A remote unauthenticated malicious user can potentially bypass application authentication and gain unauthorized root access to the affected systems.

Xpress Server in SAP POS does not require authentication for file read and erase operations, daemon shutdown, terminal read operations, or certain attacks on credentials. This is SAP Security Note 2520064.

Apollos Apps is an open source platform for launching church-related apps. In Apollos Apps versions prior to 2.20.0, new user registrations are able to access anyone's account by only knowing their basic profile information (name, birthday, gender, etc). This includes all app functionality within the app, as well as any authenticated links to Rock-based webpages (such as giving and events). There is a patch in version 2.20.0. As a workaround, one can patch one's server by overriding the `create` data source method on the `People` class.

In versions 8.2.1 through 8.5.2 of Pega Infinity, the password reset functionality for local accounts can be used to bypass local authentication checks.

In Drobo 5N2 4.0.5, all optional applications lack any form of authentication/authorization validation. As a result, any user capable of accessing the device over the network may interact with and control these applications. This not only poses a severe risk to the availability of these applications, but also poses severe risks to the confidentiality and integrity of data stored within the applications and the device itself.

Xpress Server in SAP POS does not require authentication for read/write/delete file access. This is SAP Security Note 2520064.

The usage of an internal HTTP header created an authentication bypass vulnerability (CWE-287), allowing an attacker to view internal files, change settings, manipulate services and execute arbitrary code. This issue affects all Juniper Networks 128 Technology Session Smart Router versions prior to 4.5.11, and all versions of 5.0 up to and including 5.0.1.

In Apache httpd 2.2.0 to 2.4.29, when generating an HTTP Digest authentication challenge, the nonce sent to prevent reply attacks was not correctly generated using a pseudo-random seed. In a cluster of servers using a common Digest authentication configuration, HTTP requests could be replayed across servers by an attacker without detection.

An authentication vulnerability in HPE BSM Platform Application Performance Management System Health product versions 9.26, 9.30 and 9.40, allows remote users to bypass authentication.

The function in charge to check whether the user is already logged in init.php in Interspire Email Marketer (IEM) prior to 6.1.6 allows remote attackers to bypass authentication and obtain administrative access by using the IEM_CookieLogin cookie with a specially crafted value.

An authentication bypass vulnerability on UTStar WA3002G4 ADSL Broadband Modem WA3002G4-0021.01 devices allows attackers to directly access administrative settings and obtain cleartext credentials from HTML source, as demonstrated by info.cgi, upload.cgi, backupsettings.cgi, pppoe.cgi, resetrouter.cgi, and password.cgi.

GE Infinia/Infinia with Hawkeye 4 medical imaging systems all current versions are affected these devices use default or hard-coded credentials. Successful exploitation of this vulnerability may allow a remote attacker to bypass authentication and gain access to the affected devices.

The administrator application on ASUS GT-AC2900 devices before 3.0.0.4.386.42643 and Lyra Mini before 3.0.0.4_384_46630 allows authentication bypass when processing remote input from an unauthenticated user, leading to unauthorized access to the administrator interface. This relates to handle_request in router/httpd/httpd.c and auth_check in web_hook.o. An attacker-supplied value of '\0' matches the device's default value of '\0' in some situations. Note: All versions of Lyra Mini and earlier which are unsupported (End-of-Life, EOL) are also affected by this vulnerability, Consumers can mitigate this vulnerability by disabling the remote access features from WAN.

CEServer.exe in the CEServer component in the Remote Agent module in InduSoft Web Studio 6.1 and 7.0 does not require authentication, which allows remote attackers to execute arbitrary code via vectors related to creation of a file, loading a DLL, and process control.

Wi2be SMART HP WMT R1.2.20_201400922 allows unauthorized remote attackers to reset the admin password via the /ConfigWizard/ChangePwd.esp?2admin URL (Attackers can login using the "admin" username with password "admin" after a successful attack).

The host-services component in Symantec pcAnywhere 12.5.x through 12.5.3, and IT Management Suite pcAnywhere Solution 7.0 (aka 12.5.x) and 7.1 (aka 12.6.x), does not properly filter login and authentication data, which allows remote attackers to execute arbitrary code via a crafted session on TCP port 5631.

A vulnerability in the upgrade mechanism of Cisco collaboration products based on the Cisco Voice Operating System software platform could allow an unauthenticated, remote attacker to gain unauthorized, elevated access to an affected device. The vulnerability occurs when a refresh upgrade (RU) or Prime Collaboration Deployment (PCD) migration is performed on an affected device. When a refresh upgrade or PCD migration is completed successfully, an engineering flag remains enabled and could allow root access to the device with a known password. If the vulnerable device is subsequently upgraded using the standard upgrade method to an Engineering Special Release, service update, or a new major release of the affected product, this vulnerability is remediated by that action. Note: Engineering Special Releases that are installed as COP files, as opposed to the standard upgrade method, do not remediate this vulnerability. An attacker who can access an affected device over SFTP while it is in a vulnerable state could gain root access to the device. This access could allow the attacker to compromise the affected system completely. Cisco Bug IDs: CSCvg22923, CSCvg55112, CSCvg55128, CSCvg55145, CSCvg58619, CSCvg64453, CSCvg64456, CSCvg64464, CSCvg64475, CSCvg68797.

A vulnerability in the REST API of the web-based user interface (web UI) of Cisco IOS XE 3.1 through 16.5 could allow an unauthenticated, remote attacker to bypass authentication to the REST API of the web UI of the affected software. The vulnerability is due to insufficient input validation for the REST API of the affected software. An attacker could exploit this vulnerability by sending a malicious API request to an affected device. A successful exploit could allow the attacker to bypass authentication and gain access to the web UI of the affected software. This vulnerability affects Cisco devices that are running a vulnerable release of Cisco IOS XE Software, if the HTTP Server feature is enabled for the device. The newly redesigned, web-based administration UI was introduced in the Denali 16.2 Release of Cisco IOS XE Software. This vulnerability does not affect the web-based administration UI in earlier releases of Cisco IOS XE Software. Cisco Bug IDs: CSCuz46036.

A flaw was found in Red Hat DataGrid 8.x (8.0.0, 8.0.1, 8.1.0 and 8.1.1) and Infinispan (10.0.0 through 12.0.0). An attacker could bypass authentication on all REST endpoints when DIGEST is used as the authentication method. The highest threat from this vulnerability is to data confidentiality and integrity as well as system availability.

It was discovered that the bpserverd proprietary protocol in Unitrends Backup (UB) before 10.0.0, as invoked through xinetd, has an issue in which its authentication can be bypassed. A remote attacker could use this issue to execute arbitrary commands with root privilege on the target system.

Versions of INEA ME RTU firmware 3.36b and prior do not require authentication to the "root" account on the host system of the device. This could allow an attacker to obtain admin-level access to the host system.

A vulnerability has been identified in Mendix SAML (Mendix 7 compatible) (All versions >= V1.17.3 < V1.18.0), Mendix SAML (Mendix 7 compatible) (All versions >= V1.16.4 < V1.17.3), Mendix SAML (Mendix 8 compatible) (All versions >= V2.3.0 < V2.4.0), Mendix SAML (Mendix 8 compatible) (All versions >= V2.2.0 < V2.3.0), Mendix SAML (Mendix 9 latest compatible, New Track) (All versions >= V3.3.1 < V3.6.1), Mendix SAML (Mendix 9 latest compatible, New Track) (All versions >= V3.1.9 < V3.3.1), Mendix SAML (Mendix 9 latest compatible, Upgrade Track) (All versions >= V3.3.0 < V3.6.0), Mendix SAML (Mendix 9 latest compatible, Upgrade Track) (All versions >= V3.1.8 < V3.3.0), Mendix SAML (Mendix 9.12/9.18 compatible, New Track) (All versions >= V3.3.1 < V3.3.15), Mendix SAML (Mendix 9.12/9.18 compatible, Upgrade Track) (All versions >= V3.3.0 < V3.3.14), Mendix SAML (Mendix 9.6 compatible, New Track) (All versions >= V3.1.9 < V3.2.7), Mendix SAML (Mendix 9.6 compatible, Upgrade Track) (All versions >= V3.1.8 < V3.2.6). The affected versions of the module insufficiently verify the SAML assertions. This could allow unauthenticated remote attackers to bypass authentication and get access to the application. This CVE entry describes the incomplete fix for CVE-2023-25957 in a specific non default configuration.

MaLion for Windows and Mac 5.0.0 to 5.2.1 allows remote attackers to bypass authentication to alter settings in Relay Service Server.

Improper authentication issue in PTW-WMS1 firmware version 2.000.012 allows remote attackers to log in to the device with root privileges and conduct arbitrary operations via unspecified vectors.

SYN Flood or FIN Flood attack in ECos 1 and other versions embedded devices results in web Authentication Bypass. "eCos Embedded Web Servers used by Multiple Routers and Home devices, while sending SYN Flood or FIN Flood packets fails to validate and handle the packets and does not ask for any sign of authentication resulting in Authentication Bypass. An attacker can take complete advantage of this bug and take over the device remotely or locally. The bug has been successfully tested and reproduced in some versions of SOHO Routers manufactured by TOTOLINK, GREATEK and others."

TCPUploadServer.exe in Progea Movicon 11.2 before Build 1084 does not require authentication for critical functions, which allows remote attackers to obtain sensitive information, delete files, execute arbitrary programs, or cause a denial of service (crash) via a crafted packet to TCP port 10651.

This vulnerability allows remote attackers to bypass authentication on vulnerable installations of Quest NetVault Backup 11.2.0.13. The specific flaw exists within JSON RPC Request handling. By setting the checksession parameter to a specific value, it is possible to bypass authentication to critical functions. An attacker can leverage this in conjunction with other vulnerabilities to execute arbitrary code in the context of SYSTEM. Was ZDI-CAN-4752.

DMA Softlab Radius Manager 4.4.0 assigns the same session cookie to every admin session. The cookie is valid when the admin is logged in, but is invalid (temporarily) during times when the admin is logged out. In other words, the cookie is functionally equivalent to a static password, and thus provides permanent access if stolen.

api/auth.go in Ansible Semaphore before 2.8.89 mishandles authentication.

openshift-ansible before versions 3.9.23, 3.7.46 deploys a misconfigured etcd file that causes the SSL client certificate authentication to be disabled. Quotations around the values of ETCD_CLIENT_CERT_AUTH and ETCD_PEER_CLIENT_CERT_AUTH in etcd.conf result in etcd being configured to allow remote users to connect without any authentication if they can access the etcd server bound to the network on the master nodes. An attacker could use this flaw to read and modify all the data about the Openshift cluster in the etcd datastore, potentially adding another compute node, or bringing down the entire cluster.

Hongdian H8922 3.0.5 devices have an undocumented feature that allows access to a shell as a superuser. To connect, the telnet service is used on port 5188 with the default credentials of root:superzxmn.

An issue in WooCommerce Payments plugin for WordPress (versions 5.6.1 and lower) allows an unauthenticated attacker to send requests on behalf of an elevated user, like administrator. This allows a remote, unauthenticated attacker to gain admin access on a site that has the affected version of the plugin activated.

Rocket Software UniData versions prior to 8.2.4 build 3003 and UniVerse versions prior to 11.3.5 build 1001 or 12.2.1 build 2002 suffer from an authentication bypass vulnerability, where a special username with a deterministic password can be leveraged to bypass authentication checks and execute OS commands as the root user.

A vulnerability in the authentication logic of Wyze Cam Pan v2, Cam v2, Cam v3 allows an attacker to bypass login and control the devices. This issue affects: Wyze Cam Pan v2 versions prior to 4.49.1.47. Wyze Cam v2 versions prior to 4.9.8.1002. Wyze Cam v3 versions prior to 4.36.8.32.

The remote console in the Server Controller in IBM Lotus Domino 7.x and 8.x verifies credentials against a file located at a UNC share pathname specified by the client, which allows remote attackers to bypass authentication, and consequently execute arbitrary code, by placing this pathname in the COOKIEFILE field. NOTE: this might overlap CVE-2011-0920.