An out-of-bounds read in the SNMP stack in Contiki-NG 4.4 and earlier allows an attacker to cause a denial of service and potentially disclose information via crafted SNMP packets to snmp_ber_decode_string_len_buffer in os/net/app-layer/snmp/snmp-ber.c.

Contiki-NG is an open-source, cross-platform operating system for Next-Generation IoT devices. An out-of-bounds read can be triggered by 6LoWPAN packets sent to devices running Contiki-NG 4.6 and prior. The IPv6 header decompression function (<code>uncompress_hdr_iphc</code>) does not perform proper boundary checks when reading from the packet buffer. Hence, it is possible to construct a compressed 6LoWPAN packet that will read more bytes than what is available from the packet buffer. As of time of publication, there is not a release with a patch available. Users can apply the patch for this vulnerability out-of-band as a workaround.

Memory access out of buffer boundaries issues was discovered in Contiki-NG 4.4 through 4.5, in the SNMP BER encoder/decoder. The length of provided input/output buffers is insufficiently verified during the encoding and decoding of data. This may lead to out-of-bounds buffer read or write access in BER decoding and encoding functions.

Contiki-NG is an operating system for internet of things devices. In version 4.8 and prior, when processing ICMP DAO packets in the `dao_input_storing` function, the Contiki-NG OS does not verify that the packet buffer is big enough to contain the bytes it needs before accessing them. Up to 16 bytes can be read out of bounds in the `dao_input_storing` function. An attacker can truncate an ICMP packet so that it does not contain enough data, leading to an out-of-bounds read on these lines. The problem has been patched in the "develop" branch of Contiki-NG, and is expected to be included in release 4.9. As a workaround, one can apply the changes in Contiki-NG pull request #2435 to patch the system.

An issue was discovered in Contiki-NG tinyDTLS through master branch 53a0d97. An infinite loop bug exists during the handling of a ClientHello handshake message. This bug allows remote attackers to cause a denial of service by sending a malformed ClientHello handshake message with an odd length of cipher suites, which triggers an infinite loop (consuming all resources) and a buffer over-read that can disclose sensitive information.

Buffer over-read vulnerability in Contiki-NG tinyDTLS through master branch 53a0d97 allows attackers obtain sensitive information via crafted input to dtls_ccm_decrypt_message().

Contiki-NG is an open-source, cross-platform operating system for IoT devices. An out-of-bounds read of 1 byte can be triggered when sending a packet to a device running the Contiki-NG operating system with SNMP enabled. The SNMP module is disabled in the default Contiki-NG configuration. The vulnerability exists in the os/net/app-layer/snmp/snmp-ber.c module, where the function snmp_ber_decode_string_len_buffer decodes the string length from a received SNMP packet. In one place, one byte is read from the buffer, without checking that the buffer has another byte available, leading to a possible out-of-bounds read. The problem has been patched in Contiki-NG pull request #2936. It will be included in the next release of Contiki-NG. Users are advised to apply the patch manually or to wait for the next release. A workaround is to disable the SNMP module in the Contiki-NG build configuration.

Contiki-NG is an open-source, cross-platform operating system for IoT devices. An out-of-bounds read of 1 byte can be triggered when sending a packet to a device running the Contiki-NG operating system with SNMP enabled. The SNMP module is disabled in the default Contiki-NG configuration. The vulnerability exists in the os/net/app-layer/snmp/snmp-message.c module, where the snmp_message_decode function fails to check the boundary of the message buffer when reading a byte from it immediately after decoding an object identifier (OID). The problem has been patched in Contiki-NG pull request 2937. It will be included in the next release of Contiki-NG. Users are advised to either apply the patch manually or to wait for the next release. A workaround is to disable the SNMP module in the Contiki-NG build configuration.

Contiki-NG is an open-source, cross-platform operating system for Next-Generation IoT devices. An out-of-bounds read can be caused by an incoming DIO message when using the RPL-Lite implementation in the Contiki-NG operating system. More specifically, the prefix information of the DIO message contains a field that specifies the length of an IPv6 address prefix. The value of this field is not validated, which means that an attacker can set a value that is longer than the maximum prefix length. Subsequently, a memcmp function call that compares different prefixes can be called with a length argument that surpasses the boundary of the array allocated for the prefix, causing an out-of-bounds read. The problem has been patched in the "develop" branch of Contiki-NG, and is expected to be included in the next release. Users are advised to update as soon as they are able to or to manually apply the changes in Contiki-NG pull request #2721.

Contiki-NG is an operating system for internet-of-things devices. In versions 4.9 and prior, when processing the various IPv6 header fields during IPHC header decompression, Contiki-NG confirms the received packet buffer contains enough data as needed for that field. But no similar check is done before decompressing the IPv6 address. Therefore, up to 16 bytes can be read out of bounds on the line with the statement `memcpy(&ipaddr->u8[16 - postcount], iphc_ptr, postcount);`. The value of `postcount` depends on the address compression used in the received packet and can be controlled by the attacker. As a result, an attacker can inject a packet that causes an out-of-bound read. As of time of publication, a patched version is not available. As a workaround, one can apply the changes in Contiki-NG pull request #2509 to patch the system.

Contiki-NG is an open-source, cross-platform operating system for Next-Generation IoT devices. An attacker can trigger out-of-bounds reads in the RPL-Lite implementation of the RPL protocol in the Contiki-NG operating system. This vulnerability is caused by insufficient control of the lengths for DIO and DAO messages, in particular when they contain RPL sub-option headers. The problem has been patched in Contiki-NG 4.9. Users are advised to upgrade. Users unable to upgrade should manually apply the code changes in PR #2484.

Contiki-NG is an open-source, cross-platform operating system for IoT devices. When reading the TCP MSS option value from an incoming packet, the Contiki-NG OS does not verify that certain buffer indices to read from are within the bounds of the IPv6 packet buffer, uip_buf. In particular, there is a 2-byte buffer read in the module os/net/ipv6/uip6.c. The buffer is indexed using 'UIP_IPTCPH_LEN + 2 + c' and 'UIP_IPTCPH_LEN + 3 + c', but the uip_buf buffer may not have enough data, resulting in a 2-byte read out of bounds. The problem has been patched in the "develop" branch of Contiki-NG, and is expected to be included in release 4.9. Users are advised to watch for the 4.9 release and to upgrade when it becomes available. There are no workarounds for this vulnerability aside from manually patching with the diff in commit `cde4e9839`.

Contiki-NG is an operating system for Internet of Things devices. An off-by-one error can be triggered in the Antelope database management system in the Contiki-NG operating system in versions 4.8 and prior. The problem exists in the Contiki File System (CFS) backend for the storage of data (file os/storage/antelope/storage-cfs.c). In the functions `storage_get_index` and `storage_put_index`, a buffer for merging two strings is allocated with one byte less than the maximum size of the merged strings, causing subsequent function calls to the cfs_open function to read from memory beyond the buffer size. The vulnerability has been patched in the "develop" branch of Contiki-NG, and is expected to be included in the next release. As a workaround, the problem can be fixed by applying the patch in Contiki-NG pull request #2425.

An issue was discovered in Contiki-NG through 4.1. There is a buffer over-read in lookup in os/storage/antelope/lvm.c while parsing AQL (lvm_register_variable, lvm_set_variable_value, create_intersection, create_union).

Contiki-NG is an open-source, cross-platform operating system for Next-Generation IoT devices. The low-power IPv6 network stack of Contiki-NG has a buffer module (os/net/ipv6/uipbuf.c) that processes IPv6 extension headers in incoming data packets. As part of this processing, the function uipbuf_get_next_header casts a pointer to a uip_ext_hdr structure into the packet buffer at different offsets where extension headers are expected to be found, and then reads from this structure. Because of a lack of bounds checking, the casting can be done so that the structure extends beyond the packet's end. Hence, with a carefully crafted packet, it is possible to cause the Contiki-NG system to read data outside the packet buffer. A patch that fixes the vulnerability is included in Contiki-NG 4.8.

Contiki-NG is an open-source, cross-platform operating system for IoT devices. Because of insufficient validation of IPv6 neighbor discovery options in Contiki-NG, attackers can send neighbor solicitation packets that trigger an out-of-bounds read. The problem exists in the module os/net/ipv6/uip-nd6.c, where memory read operations from the main packet buffer, <code>uip_buf</code>, are not checked if they go out of bounds. In particular, this problem can occur when attempting to read the 2-byte option header and the Source Link-Layer Address Option (SLLAO). This attack requires ipv6 be enabled for the network. The problem has been patched in the develop branch of Contiki-NG. The upcoming 4.8 release of Contiki-NG will include the patch.Users unable to upgrade may apply the patch in Contiki-NG PR #1654.

Contiki-NG is an open-source, cross-platform operating system for Next-Generation IoT devices. Versions prior to 4.9 are vulnerable to an Out-of-bounds read. While processing the L2CAP protocol, the Bluetooth Low Energy stack of Contiki-NG needs to map an incoming channel ID to its metadata structure. While looking up the corresponding channel structure in get_channel_for_cid (in os/net/mac/ble/ble-l2cap.c), a bounds check is performed on the incoming channel ID, which is meant to ensure that the channel ID does not exceed the maximum number of supported channels.However, an integer truncation issue leads to only the lowest byte of the channel ID to be checked, which leads to an incomplete out-of-bounds check. A crafted channel ID leads to out-of-bounds memory to be read and written with attacker-controlled data. The vulnerability has been patched in the "develop" branch of Contiki-NG, and will be included in release 4.9. As a workaround, Users can apply the patch in Contiki-NG pull request 2081 on GitHub.

Contiki-NG is an open-source, cross-platform operating system for Next-Generation IoT devices. The 6LoWPAN implementation in Contiki-NG may cast a UDP header structure at a certain offset in a packet buffer. The code does not check whether the packet buffer is large enough to fit a full UDP header structure from the offset where the casting is made. Hence, it is possible to cause an out-of-bounds read beyond the packet buffer. The problem affects anyone running devices with Contiki-NG versions previous to 4.8, and which may receive 6LoWPAN packets from external parties. The problem has been patched in Contiki-NG version 4.8.

An issue was discovered in uIP through 1.0, as used in Contiki and Contiki-NG. Domain name parsing lacks bounds checks, allowing an attacker to corrupt memory with crafted DNS packets.

The code that processes DNS responses in uIP through 1.0, as used in Contiki and Contiki-NG, does not check whether the number of responses specified in the DNS packet header corresponds to the response data available in the DNS packet, leading to an out-of-bounds read and Denial-of-Service in resolv.c.

Contiki-NG is an operating system for internet-of-things devices. In versions 4.9 and prior, when a packet is received, the Contiki-NG network stack attempts to start the periodic TCP timer if it is a TCP packet with the SYN flag set. But the implementation does not first verify that a full TCP header has been received. Specifically, the implementation attempts to access the flags field from the TCP buffer in the following conditional expression in the `check_for_tcp_syn` function. For this reason, an attacker can inject a truncated TCP packet, which will lead to an out-of-bound read from the packet buffer. As of time of publication, a patched version is not available. As a workaround, one can apply the changes in Contiki-NG pull request #2510 to patch the system.

A type confusion issue was addressed with improved memory handling. This issue is fixed in macOS Sequoia 15.2, iOS 18.2 and iPadOS 18.2. An attacker with user privileges may be able to read kernel memory.

Croatia Control Asterix 2.8.1 has a heap-based buffer over-read, with additional details to be disclosed at a later date.

PJSIP is a free and open source multimedia communication library. In version 2.11.1 and prior, if incoming RTCP XR message contain block, the data field is not checked against the received packet size, potentially resulting in an out-of-bound read access. This affects all users that use PJMEDIA and RTCP XR. A malicious actor can send a RTCP XR message with an invalid packet size.

GStreamer is a library for constructing graphs of media-handling components. An OOB-read vulnerability has been detected in the format_channel_mask function in gst-discoverer.c. The vulnerability affects the local array position, which is defined with a fixed size of 64 elements. However, the function gst_discoverer_audio_info_get_channels may return a guint channels value greater than 64. This causes the for loop to attempt access beyond the bounds of the position array, resulting in an OOB-read when an index greater than 63 is used. This vulnerability can result in reading unintended bytes from the stack. Additionally, the dereference of value->value_nick after the OOB-read can lead to further memory corruption or undefined behavior. This vulnerability is fixed in 1.24.10.

GStreamer is a library for constructing graphs of media-handling components. An OOB-read has been discovered in gst_wavparse_cue_chunk within gstwavparse.c. The vulnerability happens due to a discrepancy between the size of the data buffer and the size value provided to the function. This mismatch causes the comparison if (size < 4 + ncues * 24) to fail in some cases, allowing the subsequent loop to access beyond the bounds of the data buffer. The root cause of this discrepancy stems from a miscalculation when clipping the chunk size based on upstream data size. This vulnerability allows reading beyond the bounds of the data buffer, potentially leading to a crash (denial of service) or the leak of sensitive data. This vulnerability is fixed in 1.24.10.

Read out-of-bounds in PJSUA API when calling pjsua_recorder_create. An attacker-controlled 'filename' argument may cause an out-of-bounds read when the filename is shorter than 4 characters.

A buffer over-read was discovered in the CoAP library in Arm Mbed OS 5.15.3. The CoAP parser is responsible for parsing received CoAP packets. The function sn_coap_parser_options_parse() parses the CoAP packet header starting from the message token. The length of the token in the received message is provided in the first byte parsed by the sn_coap_parser_options_parse() function. The length encoded in the message is not validated against the actual input buffer length before accessing the token. As a result, memory access outside of the intended boundary of the buffer may occur.

unrar 0.0.1 (aka unrar-free or unrar-gpl) suffers from a stack-based buffer over-read in unrarlib.c, related to ExtrFile and stricomp.

Buffer over-read can happen while parsing received SDP values due to lack of NULL termination check on SDP in Snapdragon Auto, Snapdragon Compute, Snapdragon Connectivity, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon IoT, Snapdragon Mobile, Snapdragon Voice & Music, Snapdragon Wearables

There is an Improper verification vulnerability in Huawei Smartphone.Successful exploitation of this vulnerability may cause out-of-bounds read.

There is an Out-of-bounds read vulnerability in Huawei Smartphone.Successful exploitation of this vulnerability may cause out-of-bounds memory access.

There is a Out-of-bounds Read vulnerability in Huawei Smartphone.Successful exploitation of this vulnerability will cause Information Disclosure or Denial of Service.

An Out of Bounds read may potentially occur while processing an IBSS beacon, in Snapdragon Auto, Snapdragon Compute, Snapdragon Connectivity, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon Mobile, Snapdragon Voice & Music

A flaw was found in sox 14.4.1. The lsx_adpcm_init function within libsox leads to a global-buffer-overflow. This flaw allows an attacker to input a malicious file, leading to the disclosure of sensitive information.

Possible out of bound read due to improper validation of certificate chain in SSL or Internet key exchange in Snapdragon Auto, Snapdragon Compute, Snapdragon Connectivity, Snapdragon Consumer Electronics Connectivity, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon Mobile, Snapdragon Voice & Music, Snapdragon Wearables

An attacker who submits a crafted tar file with size in header struct being 0 may be able to trigger an calling of malloc(0) for a variable gnu_longlink, causing an out-of-bounds read.

Libarchive before 3.7.4 allows name out-of-bounds access when a ZIP archive has an empty-name file and mac-ext is enabled. This occurs in slurp_central_directory in archive_read_support_format_zip.c.

In MIT Kerberos 5 (aka krb5) before 1.21.3, an attacker can cause invalid memory reads during GSS message token handling by sending message tokens with invalid length fields.

FFmpeg n6.1.1 has an Out-of-bounds Read via libavcodec/ppc/vp8dsp_altivec.c, static const vec_s8 h_subpel_filters_outer

Mutt 1.11.0 through 2.0.x before 2.0.7 (and NeoMutt 2019-10-25 through 2021-05-04) has a $imap_qresync issue in which imap/util.c has an out-of-bounds read in situations where an IMAP sequence set ends with a comma. NOTE: the $imap_qresync setting for QRESYNC is not enabled by default.