Nagios XI WatchGuard Wizard before version 1.4.8 is vulnerable to remote code execution through Improper neutralisation of special elements used in an OS Command (OS Command injection).

A vulnerability, which was classified as critical, was found in WAVLINK WN535K2 and WN535K3. This affects an unknown part of the file /cgi-bin/mesh.cgi?page=upgrade. The manipulation of the argument key leads to os command injection. The exploit has been disclosed to the public and may be used.

Grandstream UCM6200 series firmware version 1.0.20.23 and below is vulnerable to OS command injection via SSH. An authenticated remote attacker can execute commands as the root user by issuing a specially crafted "unset" command.

A flaw has been found in Edimax BR-6478AC V3 1.0.15. The affected element is the function sub_44CCE4 of the file /boafrm/formSysCmd. This manipulation of the argument sysCmd causes os command injection. The attack may be initiated remotely. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

Netis N3Mv2-V1.0.1.865 was discovered to contain a command injection vulnerability via the wakeup_mac parameter in the Wake-On-LAN (WoL) function. This vulnerability is exploited via a crafted payload.

A command injection vulnerability in the web server of some Hikvision product. Due to the insufficient input validation, attacker can exploit the vulnerability to launch a command injection attack by sending some messages with malicious commands.

Dell VNX2 for file version 8.1.21.266 and earlier, contain an unauthenticated remote code execution vulnerability which may lead unauthenticated users to execute commands on the system.

A flaw was found in the REST API in StarWind Stack. REST command, which manipulates a virtual disk, doesn’t check input parameters. Some of them go directly to bash as part of a script. An attacker with non-root user access can inject arbitrary data into the command that will be executed with root privileges. This affects StarWind SAN and NAS v0.2 build 1633.

Freelancy v1.0.0 allows remote command execution via the "file":"data:application/x-php;base64 substring (in conjunction with "type":"application/x-php"} to the /api/files/ URI.

Realtek Jungle SDK version v2.x up to v3.4.14B provides a diagnostic tool called 'MP Daemon' that is usually compiled as 'UDPServer' binary. The binary is affected by multiple memory corruption vulnerabilities and an arbitrary command injection vulnerability that can be exploited by remote unauthenticated attackers.

In Nick Chan Bot before version 1.0.0-beta there is a vulnerability in the `npm` command which is part of this software package. This allows arbitrary shell execution,which can compromise the bot This is patched in version 1.0.0-beta

SGE-PLC1000 device, in its 0.9.2b firmware version, does not handle some requests correctly, allowing a remote attacker to inject code into the operating system with maximum privileges.

Sunhillo SureLine before 8.7.0.1.1 allows Unauthenticated OS Command Injection via shell metacharacters in ipAddr or dnsAddr /cgi/networkDiag.cgi.

China Mobile An Lianbao WF-1 router v1.0.1 is affected by an OS command injection vulnerability in the web interface /api/ZRUsb/pop_usb_device component.

RustFly 2.0.0 contains a command injection vulnerability in its remote UI control mechanism that accepts hex-encoded instructions over UDP port 5005 without proper sanitization. Attackers can send crafted hex-encoded payloads containing system commands to execute arbitrary operations on the target system, including reverse shell establishment and command execution.

OS Command Injection vulnerability in es128 ssl-utils 1.0.0 for Node.js allows attackers to execute arbitrary commands via unsanitized shell metacharacters provided to the createCertRequest() and the createCert() functions.

Liferay Portal 6.2.5 allows Command=FileUpload&Type=File&CurrentFolder=/ requests when frmfolders.html exists. NOTE: The vendor disputes this issue because the exploit reference link only shows frmfolders.html is accessible and does not demonstrate how an unauthorized user can upload a file.

OS Command Injection vulnerability in allenhwkim proctree through 0.1.1 and commit 0ac10ae575459457838f14e21d5996f2fa5c7593 for Node.js, allows attackers to execute arbitrary commands via the fix function.

A security vulnerability has been detected in SECCN Dingcheng G10 3.1.0.181203. This impacts the function qq of the file /cgi-bin/session_login.cgi. The manipulation of the argument User leads to os command injection. The attack is possible to be carried out remotely. The exploit has been disclosed publicly and may be used.

A vulnerability was determined in TOTOLINK X5000R 9.1.0cu.2089_B20211224. Affected by this issue is the function snprintf of the file /cgi-bin/cstecgi.cgi?action=exportOvpn&type=user. This manipulation of the argument User causes os command injection. Remote exploitation of the attack is possible. The exploit has been publicly disclosed and may be utilized.

A command injection vulnerability has been reported to affect QNAP device running QVR. If exploited, this vulnerability could allow remote attackers to run arbitrary commands. We have already fixed this vulnerability in the following versions of QVR: QVR 5.1.5 build 20210902 and later

vm2 is an open source vm/sandbox for Node.js. In vm2 for versions up to and including 3.9.19, Node.js custom inspect function allows attackers to escape the sandbox and run arbitrary code. This may result in Remote Code Execution, assuming the attacker has arbitrary code execution primitive inside the context of vm2 sandbox. There are no patches and no known workarounds. Users are advised to find an alternative software.

A command injection vulnerability has been reported to affect QNAP device running QVR. If exploited, this vulnerability could allow remote attackers to run arbitrary commands. We have already fixed this vulnerability in the following versions of QVR: QVR 5.1.5 build 20210803 and later

OS command injection vulnerability in Turistforeningen node-s3-uploader through 2.0.3 for Node.js allows attackers to execute arbitrary commands via the metadata() function.

OS Command injection vulnerability in Mintzo Docker-Tester through 1.2.1 allows attackers to execute arbitrary commands via shell metacharacters in the 'ports' entry of a crafted docker-compose.yml file.

Thecus 4800Eco was discovered to contain a command injection vulnerability via the username parameter in /adm/setmain.php.

TOTOLink A950RG V5.9c.4050_B20190424 and V4.1.2cu.5204_B20210112 were discovered to contain a command injection vulnerability in the "Main" function. This vulnerability allows attackers to execute arbitrary commands via the QUERY_STRING parameter.

Barco ClickShare Button R9861500D01 devices before 1.9.0 allow OS Command Injection. The embedded 'dongle_bridge' program used to expose the functionalities of the ClickShare Button to a USB host, is vulnerable to OS command injection vulnerabilities. These vulnerabilities could lead to code execution on the ClickShare Button with the privileges of the user 'nobody'.

TOTOLink A3000RU V5.9c.2280_B20180512 was discovered to contain a command injection vulnerability in the "Main" function. This vulnerability allows attackers to execute arbitrary commands via the QUERY_STRING parameter.

A security vulnerability has been detected in D-Link DIR-852 1.00CN B09. Impacted is the function soapcgi_main of the file soap.cgi of the component SOAP Service. Such manipulation of the argument service leads to os command injection. The attack can be launched remotely. The exploit has been disclosed publicly and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

OS command injection vulnerability in Array function in QSAN XEVO allows remote unauthenticated attackers to execute arbitrary commands via status parameter. The referred vulnerability has been solved with the updated version of QSAN XEVO v2.1.0.

IBM Spectrum Protect Plus 10.1.0 and 10.1.5 could allow a remote attacker to execute arbitrary code on the system. By using a specially crafted HTTP command, an attacker could exploit this vulnerability to execute arbitrary command on the system. IBM X-Force ID: 175024.

QSAN SANOS factory reset function does not filter special parameters. Remote attackers can use this vulnerability to inject and execute arbitrary commands without permissions. The referred vulnerability has been solved with the updated version of QSAN SANOS v2.1.0.

Improper input validation in the built-in web server in Moxa NPort IAW5000A-I/O series firmware version 2.2 or earlier may allow a remote attacker to execute commands.

A vulnerability exists in RaspAP 2.6 to 2.6.5 in the "iface" GET parameter in /ajax/networking/get_netcfg.php, when the "iface" parameter value contains special characters such as ";" which enables an unauthenticated attacker to execute arbitrary OS commands.

elFinder is an open-source file manager for web, written in JavaScript using jQuery UI. Several vulnerabilities affect elFinder 2.1.58. These vulnerabilities can allow an attacker to execute arbitrary code and commands on the server hosting the elFinder PHP connector, even with minimal configuration. The issues were patched in version 2.1.59. As a workaround, ensure the connector is not exposed without authentication.

From Apache NiFi MiNiFi C++ version 0.5.0 the c2 protocol implements an "agent-update" command which was designed to patch the application binary. This "patching" command defaults to calling a trusted binary, but might be modified to an arbitrary value through a "c2-update" command. Said command is then executed using the same privileges as the application binary. This was addressed in version 0.10.0

TinyWeb is a web server (HTTP, HTTPS) written in Delphi for Win32. TinyWeb HTTP Server before version 1.98 is vulnerable to OS command injection via CGI ISINDEX-style query parameters. The query parameters are passed as command-line arguments to the CGI executable via Windows CreateProcess(). An unauthenticated remote attacker can execute arbitrary commands on the server by injecting Windows shell metacharacters into HTTP requests. This vulnerability is fixed in 1.98.

Certain NETGEAR devices are affected by command injection by an unauthenticated attacker via the vulnerable /sqfs/lib/libsal.so.0.0 library used by a CGI application, as demonstrated by setup.cgi?token=';$HTTP_USER_AGENT;' with an OS command in the User-Agent field. This affects GC108P before 1.0.7.3, GC108PP before 1.0.7.3, GS108Tv3 before 7.0.6.3, GS110TPPv1 before 7.0.6.3, GS110TPv3 before 7.0.6.3, GS110TUPv1 before 1.0.4.3, GS710TUPv1 before 1.0.4.3, GS716TP before 1.0.2.3, GS716TPP before 1.0.2.3, GS724TPPv1 before 2.0.4.3, GS724TPv2 before 2.0.4.3, GS728TPPv2 before 6.0.6.3, GS728TPv2 before 6.0.6.3, GS752TPPv1 before 6.0.6.3, GS752TPv2 before 6.0.6.3, MS510TXM before 1.0.2.3, and MS510TXUP before 1.0.2.3.

A vulnerability has been found in TOTOLINK EX1200L EN_V9.3.5u.6146_B20201023 and classified as critical. This vulnerability affects the function setTracerouteCfg. The manipulation leads to os command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. VDB-237514 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability in the Cisco SD-WAN Solution could allow an authenticated, remote attacker to overwrite arbitrary files on the underlying operating system of an affected device. The vulnerability is due to improper input validation of the request admin-tech command in the CLI of the affected software. An attacker could exploit this vulnerability by modifying the request admin-tech command in the CLI of an affected device. A successful exploit could allow the attacker to overwrite arbitrary files on the underlying operating system of an affected device and escalate their privileges to the root user. This vulnerability affects the following Cisco products if they are running a release of the Cisco SD-WAN Solution prior to Release 18.3.0: vBond Orchestrator Software, vEdge 100 Series Routers, vEdge 1000 Series Routers, vEdge 2000 Series Routers, vEdge 5000 Series Routers, vEdge Cloud Router Platform, vManage Network Management Software, vSmart Controller Software. Cisco Bug IDs: CSCvi69852, CSCvi69856.

ALGO 8180 IP Audio Alerter SAC Command Injection Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of ALGO 8180 IP Audio Alerter devices. Authentication is not required to exploit this vulnerability. The specific flaw exists within the SAC module. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of the device. Was ZDI-CAN-28296.

TOTOLink T10 V5.9c.5061_B20200511 was discovered to contain a command injection vulnerability in the "Main" function. This vulnerability allows attackers to execute arbitrary commands via the QUERY_STRING parameter.

A vulnerability was identified in Sangfor Operation and Maintenance Management System up to 3.0.12. Affected by this issue is the function SessionController of the file /isomp-protocol/protocol/session of the component SSH Protocol Handler. The manipulation of the argument keypassword leads to os command injection. It is possible to initiate the attack remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way.

In the MMM::Agent::Helpers::Network::add_ip function in MySQL Multi-Master Replication Manager (MMM) mmm_agentd 2.2.1 (for Solaris), a specially crafted MMM protocol message can cause a shell command injection resulting in arbitrary command execution with the privileges of the mmm\_agentd process. An attacker that can initiate a TCP session with mmm\_agentd can trigger this vulnerability.

Zoho ManageEngine ADSelfService Plus through 6102 allows unauthenticated remote code execution in non-English editions.

QsanTorture in QSAN Storage Manager does not filter special parameters properly that allows remote unauthenticated attackers to inject and execute arbitrary commands. The referred vulnerability has been solved with the updated version of QSAN Storage Manager v3.3.3.