An improper neutralization of special elements used in an OS command ('OS Command Injection') vulnerability [CWE-78] in Fortinet FortiIsolator CLI before version 2.4.6 allows a privileged attacker to execute unauthorized code or commands via crafted CLI requests.

A vulnerability in the CLI of Cisco Integrated Management Controller (IMC) could allow an authenticated, local attacker to inject arbitrary commands that are executed with root privileges. The vulnerability is due to insufficient validation of user-supplied input at the CLI. An attacker could exploit this vulnerability by authenticating with the administrator password via the CLI of an affected device and submitting crafted input to the affected commands. A successful exploit could allow the attacker to execute arbitrary commands on the device with root privileges.

A vulnerability in the CLI of Cisco NX-OS Software could allow an authenticated, local attacker with administrator credentials to execute arbitrary commands on the underlying Linux operating system of an attached line card with the privilege level of root. The vulnerability is due to insufficient validation of arguments passed to a specific CLI command on the affected device. An attacker could exploit this vulnerability by including malicious input as the argument of an affected command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying Linux operating system of an attached line card with elevated privileges. An attacker would need valid administrator credentials to exploit this vulnerability.

A improper neutralization of special elements used in an os command ('os command injection') in Fortinet FortiWeb version 7.0.0 through 7.0.3, FortiADC version 7.1.0 through 7.1.1, FortiADC version 7.0.0 through 7.0.3, FortiADC 6.2 all versions, FortiADC 6.1 all versions, FortiADC 6.0 all versions, FortiADC 5.4 all versions, FortiADC 5.3 all versions, FortiADC 5.2 all versions, FortiADC 5.1 all versions allows attacker to execute unauthorized code or commands via specifically crafted arguments to existing commands.

An exploitable command injection vulnerability exists in the iocheckd service ‘I/O-Check’ function of the WAGO PFC 200 Firmware version 03.02.02(14). A specially crafted XML cache file written to a specific location on the device can be used to inject OS commands. An attacker can send a specially crafted packet to trigger the parsing of this cache file. At 0x1e9fc the extracted state value from the xml file is used as an argument to /etc/config-tools/config_interfaces interface=X1 state=<contents of state node> using sprintf(). This command is later executed via a call to system().

A vulnerability in a specific Cisco ISE CLI command could allow an authenticated, local attacker to perform command injection attacks on the underlying operating system and elevate privileges to root. To exploit this vulnerability, an attacker must have valid Administrator-level privileges on the affected device. This vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by submitting a crafted CLI command. A successful exploit could allow the attacker to elevate privileges to root.

A vulnerability in the CLI of Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, local attacker to perform a command injection attack. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by injecting commands into arguments for a specific command. A successful exploit could allow the attacker to execute commands with root privileges.

The Tecno Camon Android device with a build fingerprint of TECNO/H612/TECNO-ID5a:8.1.0/O11019/F-180828V106:user/release-keys contains a pre-installed platform app with a package name of com.lovelyfont.defcontainer (versionCode=7, versionName=7.0.11). This app contains an exported service named com.lovelyfont.manager.FontCoverService that allows any app co-located on the device to supply arbitrary commands via shell script to be executed as the system user that are triggered by writing an attacker-selected message to the logcat log. This app cannot be disabled by the user and the attack can be performed by a zero-permission app. Executing commands as the system user can allow a third-party app to video record the user's screen, factory reset the device, obtain the user's notifications, read the logcat logs, inject events in the Graphical User Interface (GUI), and obtains the user's text messages, and more. Executing commands as the system user can allow a third-party app to factory reset the device, obtain the user's notifications, read the logcat logs, inject events in the GUI, change the default Input Method Editor (IME) (e.g., keyboard) with one contained within the attacking app that contains keylogging functionality, and obtains the user's text messages, and more.

In manager.c in ss-manager in shadowsocks-libev 3.1.0, improper parsing allows command injection via shell metacharacters in a JSON configuration request received via 127.0.0.1 UDP traffic, related to the add_server, build_config, and construct_command_line functions.

Dell PowerScale OneFS, versions 8.2.2-9.3.0, contain an OS command injection vulnerability. A privileged local malicious user could potentially exploit this vulnerability, leading to a full system compromise. This impacts compliance mode clusters.

sharp is an application for Node.js image processing. Prior to version 0.30.5, there is a possible vulnerability in logic that is run only at `npm install` time when installing versions of `sharp` prior to the latest v0.30.5. If an attacker has the ability to set the value of the `PKG_CONFIG_PATH` environment variable in a build environment then they might be able to use this to inject an arbitrary command at `npm install` time. This is not part of any runtime code, does not affect Windows users at all, and is unlikely to affect anyone that already cares about the security of their build environment. This problem is fixed in version 0.30.5.

Dell EMC PowerStore versions 2.0.0.x, 2.0.1.x, and 2.1.0.x are vulnerable to a command injection flaw. An authenticated attacker could potentially exploit this vulnerability, leading to the execution of arbitrary OS commands on the application's underlying OS, with the privileges of the vulnerable application. Exploitation may lead to a system takeover by an attacker.

A argument injection vulnerability in the 'packet-trace' CLI command of Zyxel USG/ZyWALL series firmware versions 4.09 through 4.71, USG FLEX series firmware versions 4.50 through 5.21, ATP series firmware versions 4.32 through 5.21, VPN series firmware versions 4.30 through 5.21, NSG series firmware versions 1.00 through 1.33 Patch 4, NXC2500 firmware version 6.10(AAIG.3) and earlier versions, NAP203 firmware version 6.25(ABFA.7) and earlier versions, NWA50AX firmware version 6.25(ABYW.5) and earlier versions, WAC500 firmware version 6.30(ABVS.2) and earlier versions, and WAX510D firmware version 6.30(ABTF.2) and earlier versions, that could allow a local authenticated attacker to execute arbitrary OS commands by including crafted arguments to the CLI command.

The bash_completion script for fscrypt allows injection of commands via crafted mountpoint paths, allowing privilege escalation under a specific set of circumstances. A local user who has control over mountpoint paths could potentially escalate their privileges if they create a malicious mountpoint path and if the system administrator happens to be using the fscrypt bash completion script to complete mountpoint paths. We recommend upgrading to version 0.3.3 or above

A improper neutralization of special elements used in an os command ('os command injection') in Fortinet FortiAP-S 6.2 all verisons, and 6.4.0 through 6.4.9, FortiAP-W2 6.4 all versions, 7.0 all versions, 7.2.0 through 7.2.3, and 7.4.0 through 7.4.2, FortiAP 6.4 all versions, 7.0 all versions, 7.2.0 through 7.2.3, and 7.4.0 through 7.4.2 allow a local authenticated attacker to execute unauthorized code via the CLI.

VMware NSX Edge contains a CLI shell injection vulnerability. A malicious actor with SSH access to an NSX-Edge appliance can execute arbitrary commands on the operating system as root.

IBM InfoSphere Information Server 11.7 could allow a locally authenticated attacker to execute arbitrary commands on the system by sending a specially crafted request.

A improper neutralization of special elements used in an os command ('os command injection') in Fortinet FortiIsolator version 1.0.0, FortiIsolator version 1.1.0, FortiIsolator version 1.2.0 through 1.2.2, FortiIsolator version 2.0.0 through 2.0.1, FortiIsolator version 2.1.0 through 2.1.2, FortiIsolator version 2.2.0, FortiIsolator version 2.3.0 through 2.3.4 allows attacker to execute arbitrary OS commands in the underlying shell via specially crafted input parameters.

Dell EMC PowerStore, contains an OS command injection Vulnerability. A locally authenticated attacker could potentially exploit this vulnerability, leading to the execution of arbitrary OS commands on the PowerStore underlying OS, with the privileges of the vulnerable application. Exploitation may lead to an elevation of privilege.

A vulnerability in the CLI of Cisco FXOS Software could allow an authenticated, local attacker to inject arbitrary commands that are executed with root privileges. The attacker would need to have Administrator privileges on the device. This vulnerability is due to insufficient input validation of commands supplied by the user. An attacker could exploit this vulnerability by authenticating to a device and submitting crafted input to the affected command. A successful exploit could allow the attacker to execute commands on the underlying operating system with root privileges.

A vulnerability in the CLI of Cisco SD-WAN Software could allow an authenticated, local attacker to overwrite and possibly corrupt files on an affected system. This vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by injecting arbitrary commands that are executed as the root user account. A successful exploit could allow the attacker to overwrite arbitrary system files, which could result in a denial of service (DoS) condition.

A vulnerability in the self-healing functionality of Cisco IOS XE Software for Embedded Wireless Controllers on Catalyst Access Points could allow an authenticated, local attacker to escape the restricted controller shell and execute arbitrary commands on the underlying operating system of the access point. This vulnerability is due to improper checks throughout the restart of certain system processes. An attacker could exploit this vulnerability by logging on to an affected device and executing certain CLI commands. A successful exploit could allow the attacker to execute arbitrary commands on the underlying OS as root. To successfully exploit this vulnerability, an attacker would need valid credentials for a privilege level 15 user of the wireless controller.

A vulnerability in the CLI of Cisco Firepower Threat Defense (FTD) Software and Cisco FXOS Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying operating system as root. This vulnerability is due to improper input validation for specific CLI commands. An attacker could exploit this vulnerability by injecting operating system commands into a legitimate command. A successful exploit could allow the attacker to escape the restricted command prompt and execute arbitrary commands on the underlying operating system. To successfully exploit this vulnerability, an attacker would need valid Administrator credentials.

A vulnerability has been identified in RUGGEDCOM RM1224 LTE(4G) EU (6GK6108-4AM00-2BA2) (All versions < V8.0), RUGGEDCOM RM1224 LTE(4G) NAM (6GK6108-4AM00-2DA2) (All versions < V8.0), SCALANCE M804PB (6GK5804-0AP00-2AA2) (All versions < V8.0), SCALANCE M812-1 ADSL-Router (6GK5812-1AA00-2AA2) (All versions < V8.0), SCALANCE M812-1 ADSL-Router (6GK5812-1BA00-2AA2) (All versions < V8.0), SCALANCE M816-1 ADSL-Router (6GK5816-1AA00-2AA2) (All versions < V8.0), SCALANCE M816-1 ADSL-Router (6GK5816-1BA00-2AA2) (All versions < V8.0), SCALANCE M826-2 SHDSL-Router (6GK5826-2AB00-2AB2) (All versions < V8.0), SCALANCE M874-2 (6GK5874-2AA00-2AA2) (All versions < V8.0), SCALANCE M874-3 (6GK5874-3AA00-2AA2) (All versions < V8.0), SCALANCE M876-3 (6GK5876-3AA02-2BA2) (All versions < V8.0), SCALANCE M876-3 (ROK) (6GK5876-3AA02-2EA2) (All versions < V8.0), SCALANCE M876-4 (6GK5876-4AA10-2BA2) (All versions < V8.0), SCALANCE M876-4 (EU) (6GK5876-4AA00-2BA2) (All versions < V8.0), SCALANCE M876-4 (NAM) (6GK5876-4AA00-2DA2) (All versions < V8.0), SCALANCE MUM853-1 (EU) (6GK5853-2EA00-2DA1) (All versions < V8.0), SCALANCE MUM856-1 (EU) (6GK5856-2EA00-3DA1) (All versions < V8.0), SCALANCE MUM856-1 (RoW) (6GK5856-2EA00-3AA1) (All versions < V8.0), SCALANCE S615 EEC LAN-Router (6GK5615-0AA01-2AA2) (All versions < V8.0), SCALANCE S615 LAN-Router (6GK5615-0AA00-2AA2) (All versions < V8.0). An Improper Neutralization of Special Elements used in an OS Command with root privileges vulnerability exists in the handling of the DDNS configuration. This could allow malicious local administrators to issue commands on system level after a successful IP address update.

A vulnerability has been identified in RUGGEDCOM RM1224 LTE(4G) EU (6GK6108-4AM00-2BA2) (All versions < V7.2.2), RUGGEDCOM RM1224 LTE(4G) NAM (6GK6108-4AM00-2DA2) (All versions < V7.2.2), SCALANCE M804PB (6GK5804-0AP00-2AA2) (All versions < V7.2.2), SCALANCE M812-1 ADSL-Router (6GK5812-1AA00-2AA2) (All versions < V7.2.2), SCALANCE M812-1 ADSL-Router (6GK5812-1BA00-2AA2) (All versions < V7.2.2), SCALANCE M816-1 ADSL-Router (6GK5816-1AA00-2AA2) (All versions < V7.2.2), SCALANCE M816-1 ADSL-Router (6GK5816-1BA00-2AA2) (All versions < V7.2.2), SCALANCE M826-2 SHDSL-Router (6GK5826-2AB00-2AB2) (All versions < V7.2.2), SCALANCE M874-2 (6GK5874-2AA00-2AA2) (All versions < V7.2.2), SCALANCE M874-3 (6GK5874-3AA00-2AA2) (All versions < V7.2.2), SCALANCE M876-3 (6GK5876-3AA02-2BA2) (All versions < V7.2.2), SCALANCE M876-3 (ROK) (6GK5876-3AA02-2EA2) (All versions < V7.2.2), SCALANCE M876-4 (6GK5876-4AA10-2BA2) (All versions < V7.2.2), SCALANCE M876-4 (EU) (6GK5876-4AA00-2BA2) (All versions < V7.2.2), SCALANCE M876-4 (NAM) (6GK5876-4AA00-2DA2) (All versions < V7.2.2), SCALANCE MUM853-1 (EU) (6GK5853-2EA00-2DA1) (All versions < V7.2.2), SCALANCE MUM856-1 (EU) (6GK5856-2EA00-3DA1) (All versions < V7.2.2), SCALANCE MUM856-1 (RoW) (6GK5856-2EA00-3AA1) (All versions < V7.2.2), SCALANCE S615 EEC LAN-Router (6GK5615-0AA01-2AA2) (All versions < V7.2.2), SCALANCE S615 LAN-Router (6GK5615-0AA00-2AA2) (All versions < V7.2.2). An Improper Neutralization of Special Elements used in an OS Command with root privileges vulnerability exists in the parsing of the IPSEC configuration. This could allow malicious local administrators to issue commands on system level after a new connection is established.

A command injection vulnerability in the protest binary allows an attacker with access to the remote command line interface to execute arbitrary commands as root.

Arbitrary Command Injection in GitHub repository strapi/strapi prior to 4.1.0.

cnMaestro is vulnerable to a local privilege escalation. By default, a user does not have root privileges. However, a user can run scripts as sudo, which could allow an attacker to gain root privileges when running user scripts outside allowed commands.

A vulnerability in the Cisco Unified Computing System (UCS) Manager, Cisco Firepower 4100 Series Next-Generation Firewall (NGFW), and Cisco Firepower 9300 Security Appliance could allow an authenticated, local attacker to obtain root shell privileges on the device, aka Command Injection. The vulnerability is due to improper validation of string input in the shell application. An attacker could exploit this vulnerability through the use of malicious commands. A successful exploit could allow the attacker to obtain root shell privileges on the device. Cisco Bug IDs: CSCvf20741, CSCvf60078.

Dell PowerProtect DD , versions prior to 7.13.0.10, LTS 7.7.5.25, LTS 7.10.1.15, 6.2.1.110 contain an OS command injection vulnerability in administrator CLI. A local high privileged attacker could potentially exploit this vulnerability, to bypass security restrictions. Exploitation may lead to a system take over by an attacker

A vulnerability in the debug interface of Cisco IP Phone 8800 series could allow an authenticated, local attacker to execute arbitrary commands, aka Debug Shell Command Injection. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by authenticating to the device and submitting additional command input to the affected parameter in the debug shell. Cisco Bug IDs: CSCvf80034.

A violation of secure design principles in Fortinet Meru AP version 8.6.1 and below, version 8.5.5 and below allows attacker to execute unauthorized code or commands via crafted cli commands.

Dell EMC Unity, Dell EMC UnityVSA and Dell EMC Unity XT versions prior to 5.1.2.0.5.007 contain an operating system (OS) command injection Vulnerability. A locally authenticated user with high privileges may potentially exploit this vulnerability, leading to the execution of arbitrary OS commands on the Unity underlying OS, with the privileges of the vulnerable application. Exploitation may lead to an elevation of privilege.

Multiple improper neutralization of special elements used in an OS command ('OS Command Injection') vulnerabilities [CWE-78] in Fortinet FortiManager version 7.4.0 through 7.4.2 and before 7.2.5, Fortinet FortiAnalyzer version 7.4.0 through 7.4.2 and before 7.2.5 and Fortinet FortiAnalyzer-BigData before 7.4.0 allows an authenticated privileged attacker to execute unauthorized code or commands via crafted CLI requests.

The chroothole_client executable in UCOPIA Wireless Appliance before 5.1.8 allows remote attackers to gain root privileges via a dollar sign ($) metacharacter in the argument to chroothole_client.

An issue was discovered on DCN (Digital China Networks) S4600-10P-SI devices before R0241.0470. Due to improper parameter validation in the console interface, it is possible for a low-privileged authenticated attacker to escape the sandbox environment and execute system commands as root via shell metacharacters in the capture command parameters. Command output will be shown on the Serial interface of the device. Exploitation requires both credentials and physical access.

Linux Dash up to version v2 is vulnerable to multiple command injection vulnerabilities in the way module names are parsed and then executed resulting in code execution on the server, potentially as root.

Dell PowerProtect Data Domain with Data Domain Operating System (DD OS) of Feature Release versions 7.7.1.0 through 8.1.0.10, LTS2024 release Versions 7.13.1.0 through 7.13.1.25, LTS 2023 release versions 7.10.1.0 through 7.10.1.50, contain an Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability in the DDSH CLI. A high privileged attacker with local access could potentially exploit this vulnerability to execute arbitrary commands with root privileges

An improper neutralization of special elements used in an OS command vulnerability [CWE-78]  in the command line interpreter of FortiTester 2.3.0 through 7.2.3 may allow an authenticated attacker to execute unauthorized commands via specifically crafted arguments when running execute restore/backup .

Dell VNX2 for File version 8.1.21.266 and earlier, contain a privilege escalation vulnerability. A local malicious admin may potentially exploit vulnerability and gain elevated privileges.

D-Link router DSL-2750U with firmware vME1.16 or prior versions is vulnerable to OS command injection. An unauthenticated attacker on the local network may exploit this, with CVE-2021-3707, to execute any OS commands on the vulnerable device.

There is a command injection vulnerability in the HG8045Q product. When the command-line interface is enabled, which is disabled by default, attackers with administrator privilege could execute part of commands.

iox in Cisco IOS, possibly 15.6 and earlier, and IOS XE, possibly 3.18 and earlier, allows local users to execute arbitrary IOx Linux commands on the guest OS via crafted iox command-line options, aka Bug ID CSCuz59223.

IBM Security Guardium Database Activity Monitor appliance could allow a local user to inject commands that would be executed as root.

An authenticated shell command injection issue has been discovered in Raisecom ISCOM HT803G-U, HT803G-W, HT803G-1GE, and HT803G GPON products with the firmware version ISCOMHT803G-U_2.0.0_140521_R4.1.47.002 or below. The value of the fmgpon_loid parameter is used in a system call inside the boa binary. Because there is no user input validation, this leads to authenticated code execution on the device.

An authenticated shell command injection issue has been discovered in Raisecom ISCOM HT803G-U, HT803G-W, HT803G-1GE, and HT803G GPON products with the firmware version ISCOMHT803G-U_2.0.0_140521_R4.1.47.002 or below, The values of the newpass and confpass parameters in /bin/WebMGR are used in a system call in the firmware. Because there is no user input validation, this leads to authenticated code execution on the device.

A Command Execution Vulnerability exists in IBM Sterling External Authentication Server 2.2.0, 2.3.01, 2.4.0, and 2.4.1 via an unspecified OS command, which could let a local malicious user execute arbitrary code.

A command injection vulnerability exists in the administrative web portal in TP-Link Archer VR1600V devices running firmware Versions <= 0.1.0. 0.9.1 v5006.0 Build 220518 Rel.32480n which allows remote attackers, authenticated to the administrative web portal as an administrator user to open an operating system level shell via the 'X_TP_IfName' parameter.