An issue has been found in libIEC61850 v1.3.1. Memory_malloc in hal/memory/lib_memory.c has a memory leak when called from Asn1PrimitiveValue_create in mms/asn1/asn1_ber_primitive_value.c, as demonstrated by goose_publisher_example.c and iec61850_9_2_LE_example.c.

In the Linux kernel, the following vulnerability has been resolved: gue: Fix skb memleak with inner IP protocol 0. syzbot reported skb memleak below. [0] The repro generated a GUE packet with its inner protocol 0. gue_udp_recv() returns -guehdr->proto_ctype for "resubmit" in ip_protocol_deliver_rcu(), but this only works with non-zero protocol number. Let's drop such packets. Note that 0 is a valid number (IPv6 Hop-by-Hop Option). I think it is not practical to encap HOPOPT in GUE, so once someone starts to complain, we could pass down a resubmit flag pointer to distinguish two zeros from the upper layer: * no error * resubmit HOPOPT [0] BUG: memory leak unreferenced object 0xffff888109695a00 (size 240): comm "syz.0.17", pid 6088, jiffies 4294943096 hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 40 c2 10 81 88 ff ff 00 00 00 00 00 00 00 00 .@.............. backtrace (crc a84b336f): kmemleak_alloc_recursive include/linux/kmemleak.h:44 [inline] slab_post_alloc_hook mm/slub.c:4958 [inline] slab_alloc_node mm/slub.c:5263 [inline] kmem_cache_alloc_noprof+0x3b4/0x590 mm/slub.c:5270 __build_skb+0x23/0x60 net/core/skbuff.c:474 build_skb+0x20/0x190 net/core/skbuff.c:490 __tun_build_skb drivers/net/tun.c:1541 [inline] tun_build_skb+0x4a1/0xa40 drivers/net/tun.c:1636 tun_get_user+0xc12/0x2030 drivers/net/tun.c:1770 tun_chr_write_iter+0x71/0x120 drivers/net/tun.c:1999 new_sync_write fs/read_write.c:593 [inline] vfs_write+0x45d/0x710 fs/read_write.c:686 ksys_write+0xa7/0x170 fs/read_write.c:738 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xa4/0xf80 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f

In the Linux kernel, the following vulnerability has been resolved: net: ti: icssg-prueth: Fix memory leak in XDP_DROP for non-zero-copy mode Page recycling was removed from the XDP_DROP path in emac_run_xdp() to avoid conflicts with AF_XDP zero-copy mode, which uses xsk_buff_free() instead. However, this causes a memory leak when running XDP programs that drop packets in non-zero-copy mode (standard page pool mode). The pages are never returned to the page pool, leading to OOM conditions. Fix this by handling cleanup in the caller, emac_rx_packet(). When emac_run_xdp() returns ICSSG_XDP_CONSUMED for XDP_DROP, the caller now recycles the page back to the page pool. The zero-copy path, emac_rx_packet_zc() already handles cleanup correctly with xsk_buff_free().

On BIG-IP versions 15.0.0-15.0.1.1, 14.1.0-14.1.2, 14.0.0-14.0.1, 13.1.0-13.1.3.1, and 12.1.0-12.1.5, a memory leak in Multicast Forwarding Cache (MFC) handling in tmrouted.

In the Linux kernel, the following vulnerability has been resolved: tls: Purge async_hold in tls_decrypt_async_wait() The async_hold queue pins encrypted input skbs while the AEAD engine references their scatterlist data. Once tls_decrypt_async_wait() returns, every AEAD operation has completed and the engine no longer references those skbs, so they can be freed unconditionally. A subsequent patch adds batch async decryption to tls_sw_read_sock(), introducing a new call site that must drain pending AEAD operations and release held skbs. Move __skb_queue_purge(&ctx->async_hold) into tls_decrypt_async_wait() so the purge is centralized and every caller -- recvmsg's drain path, the -EBUSY fallback in tls_do_decryption(), and the new read_sock batch path -- releases held skbs on synchronization without each site managing the purge independently. This fixes a leak when tls_strp_msg_hold() fails part-way through, after having added some cloned skbs to the async_hold queue. tls_decrypt_sg() will then call tls_decrypt_async_wait() to process all pending decrypts, and drop back to synchronous mode, but tls_sw_recvmsg() only flushes the async_hold queue when one record has been processed in "fully-async" mode, which may not be the case here. [pabeni@redhat.com: added leak comment]

When running with FIPS mode enabled, Mirantis Container Runtime 20.10.8 leaks memory during TLS Handshakes which could be abused to cause a denial of service.

A vulnerability classified as problematic was found in Linux Kernel. This vulnerability affects the function macvlan_handle_frame of the file drivers/net/macvlan.c of the component skb. The manipulation leads to memory leak. The attack can be initiated remotely. It is recommended to apply a patch to fix this issue. The identifier of this vulnerability is VDB-211024.

A Missing Release of Memory after Effective Lifetime vulnerability in the routing process daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved allows an attacker to send a malformed BGP Path attribute update which allocates memory used to log the bad path attribute. This memory is not properly freed in all circumstances, leading to a Denial of Service (DoS). Consumed memory can be freed by manually restarting Routing Protocol Daemon (rpd). Memory utilization could be monitored by:  user@host> show system memory or show system monitor memory status This issue affects: Junos OS:  * All versions before 21.2R3-S8,  * from 21.4 before 21.4R3-S8, * from 22.2 before 22.2R3-S4,  * from 22.3 before 22.3R3-S3,  * from 22.4 before 22.4R3-S3, * from 23.2 before 23.2R2-S1,  * from 23.4 before 23.4R1-S2, 23.4R2. Junos OS Evolved: * All versions before 21.2R3-S8-EVO, * from 21.4 before 21.4R3-S8-EVO, * from 22.2 before 22.2R3-S4-EVO, * from 22.3 before 22.3R3-S3-EVO, * from 22.4 before 22.4R3-S3-EVO, * from 23.2 before 23.2R2-S1-EVO, * from 23.4 before 23.4R1-S2-EVO, 23.4R2-EVO.

In Trusted Firmware-M through 1.3.0, cleaning up the memory allocated for a multi-part cryptographic operation (in the event of a failure) can prevent the abort() operation in the associated cryptographic library from freeing internal resources, causing a memory leak.

Redis v7.0 was discovered to contain a memory leak via the component streamGetEdgeID.

A memory leak in the adis_update_scan_mode() function in drivers/iio/imu/adis_buffer.c in the Linux kernel before 5.3.9 allows attackers to cause a denial of service (memory consumption), aka CID-ab612b1daf41.

Memory leak in the embedded_profile_len function in pngwutil.c in libpng before 1.2.39beta5 allows context-dependent attackers to cause a denial of service (memory leak or segmentation fault) via a JPEG image containing an iCCP chunk with a negative embedded profile length. NOTE: this is due to an incomplete fix for CVE-2006-7244.

An issue was discovered in the Linux kernel before 5.0.1. There is a memory leak in register_queue_kobjects() in net/core/net-sysfs.c, which will cause denial of service.

An attacker can leverage this flaw to gradually erode available memory to the point where named crashes for lack of resources. Upon restart the attacker would have to begin again, but nevertheless there is the potential to deny service.

In the Linux kernel, the following vulnerability has been resolved: smb: server: fix active_num_conn leak on transport allocation failure Commit 77ffbcac4e56 ("smb: server: fix leak of active_num_conn in ksmbd_tcp_new_connection()") addressed the kthread_run() failure path. The earlier alloc_transport() == NULL path in the same function has the same leak, is reachable pre-authentication via any TCP connect to port 445, and was empirically reproduced on UML (ARCH=um, v7.0-rc7): a small number of forced allocation failures were sufficient to put ksmbd into a state where every subsequent connection attempt was rejected for the remainder of the boot. ksmbd_kthread_fn() increments active_num_conn before calling ksmbd_tcp_new_connection() and discards the return value, so when alloc_transport() returns NULL the socket is released and -ENOMEM returned without decrementing the counter. Each such failure permanently consumes one slot from the max_connections pool; once cumulative failures reach the cap, atomic_inc_return() hits the threshold on every subsequent accept and every new connection is rejected. The counter is only reset by module reload. An unauthenticated remote attacker can drive the server toward the memory pressure that makes alloc_transport() fail by holding open connections with large RFC1002 lengths up to MAX_STREAM_PROT_LEN (0x00FFFFFF); natural transient allocation failures on a loaded host produce the same drift more slowly. Mirror the existing rollback pattern in ksmbd_kthread_fn(): on the alloc_transport() failure path, decrement active_num_conn gated on server_conf.max_connections. Repro details: with the patch reverted, forced alloc_transport() NULL returns leaked counter slots and subsequent connection attempts -- including legitimate connects issued after the forced-fail window had closed -- were all rejected with "Limit the maximum number of connections". With this patch applied, the same connect sequence produces no rejections and the counter cycles cleanly between zero and one on every accept.

A vulnerability found in jasper. This security vulnerability happens because of a memory leak bug in function cmdopts_parse that can cause a crash or segmentation fault.

Unicorn Engine v2.0.0-rc7 and below was discovered to contain a memory leak via the function uc_close at /my/unicorn/uc.c.

Multiple memory leaks in the dtls1_process_out_of_seq_message function in ssl/d1_both.c in OpenSSL 0.9.8k and earlier 0.9.8 versions allow remote attackers to cause a denial of service (memory consumption) via DTLS records that (1) are duplicates or (2) have sequence numbers much greater than current sequence numbers, aka "DTLS fragment handling memory leak."

Multiple memory leaks in t1_lib.c in OpenSSL before 1.0.1u, 1.0.2 before 1.0.2i, and 1.1.0 before 1.1.0a allow remote attackers to cause a denial of service (memory consumption) via large OCSP Status Request extensions.

When a client SSL profile is configured on a virtual server, undisclosed requests can cause an increase in memory resource utilization.  Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.

LiteSpeed QUIC (LSQUIC) Library before 4.3.1 has an lsquic_engine_packet_in memory leak.

In tinyMQTT commit 6226ade15bd4f97be2d196352e64dd10937c1962 (2024-02-18), a memory leak occurs due to the broker's failure to validate or reject malformed UTF-8 strings in topic filters. An attacker can exploit this by sending repeated subscription requests with arbitrarily large or invalid filter payloads. Each request causes memory to be allocated for the malformed topic filter, but the broker does not free the associated memory, leading to unbounded heap growth and potential denial of service under sustained attack.

Bareos is open source software for backup, archiving, and recovery of data for operating systems. When Bareos Director >= 18.2 but prior to 21.1.0, 20.0.6, and 19.2.12 is built and configured for PAM authentication, a failed PAM authentication will leak a small amount of memory. An attacker that is able to use the PAM Console (i.e. by knowing the shared secret or via the WebUI) can flood the Director with failing login attempts which will eventually lead to an out-of-memory condition in which the Director will not work anymore. Bareos Director versions 21.1.0, 20.0.6 and 19.2.12 contain a Bugfix for this problem. Users who are unable to upgrade may disable PAM authentication as a workaround.

Some ZTE products have a DoS vulnerability. Due to the improper handling of memory release in some specific scenarios, a remote attacker can trigger the vulnerability by performing a series of operations, resulting in memory leak, which may eventually lead to device denial of service. This affects: ZXR10 9904, ZXR10 9908, ZXR10 9916, ZXR10 9904-S, ZXR10 9908-S; all versions up to V1.01.10.B12.

An uncontrolled resource consumption (memory leak) flaw was found in ZeroMQ's src/xpub.cpp in versions before 4.3.3. This flaw allows a remote unauthenticated attacker to send crafted PUB messages that consume excessive memory if the CURVE/ZAP authentication is disabled on the server, causing a denial of service. The highest threat from this vulnerability is to system availability.

Multiple vulnerabilities in the ingress packet processing function of Cisco IOS XR Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in the IPv4 protocol handling of Cisco StarOS could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to a memory leak that occurs during packet processing. An attacker could exploit this vulnerability by sending a series of crafted IPv4 packets through an affected device. A successful exploit could allow the attacker to exhaust the available memory and cause an unexpected restart of the npusim process, leading to a DoS condition on the affected device.

Manage Engine Asset Explorer Agent 1.0.34 listens on port 9000 for incoming commands over HTTPS from Manage Engine Server. The HTTPS certificates are not verified which allows any arbitrary user on the network to send commands over port 9000. While these commands may not be executed (due to authtoken validation), the Asset Explorer agent will reach out to the manage engine server for an HTTP request. During this process, AEAgent.cpp allocates 0x66 bytes using "malloc". This memory is never free-ed in the program, causing a memory leak. Additionally, the instruction sent to aeagent (ie: NEWSCAN, DELTASCAN, etc) is converted to a unicode string, but is never freed. These memory leaks allow a remote attacker to exploit a Denial of Service scenario through repetitively sending these commands to an agent and eventually crashing it the agent due to an out-of-memory condition.

On Juniper Networks SRX Series devices with link aggregation (lag) configured, executing any operation that fetches Aggregated Ethernet (AE) interface statistics, including but not limited to SNMP GET requests, causes a slow kernel memory leak. If all the available memory is consumed, the traffic will be impacted and a reboot might be required. The following log can be seen if this issue happens. /kernel: rt_pfe_veto: Memory over consumed. Op 1 err 12, rtsm_id 0:-1, msg type 72 /kernel: rt_pfe_veto: free kmem_map memory = (20770816) curproc = kmd An administrator can use the following CLI command to monitor the status of memory consumption (ifstat bucket): user@device > show system virtual-memory no-forwarding | match ifstat Type InUse MemUse HighUse Limit Requests Limit Limit Size(s) ifstat 2588977 162708K - 19633958 <<<< user@device > show system virtual-memory no-forwarding | match ifstat Type InUse MemUse HighUse Limit Requests Limit Limit Size(s) ifstat 3021629 189749K - 22914415 <<<< This issue affects Juniper Networks Junos OS on SRX Series: 17.1 versions 17.1R3 and above prior to 17.3R3-S11; 17.4 versions prior to 17.4R3-S5; 18.2 versions prior to 18.2R3-S7, 18.2R3-S8; 18.3 versions prior to 18.3R3-S4; 18.4 versions prior to 18.4R2-S7, 18.4R3-S6; 19.1 versions prior to 19.1R3-S4; 19.2 versions prior to 19.2R1-S6; 19.3 versions prior to 19.3R3-S1; 19.4 versions prior to 19.4R3-S1; 20.1 versions prior to 20.1R2, 20.1R3; 20.2 versions prior to 20.2R2-S2, 20.2R3; 20.3 versions prior to 20.3R1-S2, 20.3R2. This issue does not affect Juniper Networks Junos OS prior to 17.1R3.

On Juniper Networks MX Series and EX9200 Series platforms with Trio-based MPC (Modular Port Concentrator) where Integrated Routing and Bridging (IRB) interface is configured and it is mapped to a VPLS instance or a Bridge-Domain, certain network events at Customer Edge (CE) device may cause memory leak in the MPC which can cause an out of memory and MPC restarts. When this issue occurs, there will be temporary traffic interruption until the MPC is restored. An administrator can use the following CLI command to monitor the status of memory usage level of the MPC: user@device> show system resource-monitor fpc FPC Resource Usage Summary Free Heap Mem Watermark : 20 % Free NH Mem Watermark : 20 % Free Filter Mem Watermark : 20 % * - Watermark reached Slot # % Heap Free RTT Average RTT 1 87 PFE # % ENCAP mem Free % NH mem Free % FW mem Free 0 NA 88 99 1 NA 89 99 When the issue is occurring, the value of “% NH mem Free” will go down until the MPC restarts. This issue affects MX Series and EX9200 Series with Trio-based PFEs (Packet Forwarding Engines). Please refer to https://kb.juniper.net/KB25385 for the list of Trio-based PFEs. This issue affects Juniper Networks Junos OS on MX Series, EX9200 Series: 17.3R3-S8; 17.4R3-S2; 18.2R3-S4, 18.2R3-S5; 18.3R3-S2, 18.3R3-S3; 18.4 versions starting from 18.4R3-S1 and later versions prior to 18.4R3-S6; 19.2 versions starting from 19.2R2 and later versions prior to 19.2R3-S1; 19.4 versions starting from 19.4R2 and later versions prior to 19.4R2-S3, 19.4R3; 20.2 versions starting from 20.2R1 and later versions prior to 20.2R1-S3, 20.2R2. This issue does not affect Juniper Networks Junos OS: 18.1, 19.1, 19.3, 20.1.

There is a memory leak vulnerability in some versions of Huawei CloudEngine product. An unauthenticated, remote attacker may exploit this vulnerability by sending specific message to the affected product. Due to not release the allocated memory properly, successful exploit may cause memory leak.

An ni_dhcp4_fsm_process_dhcp4_packet memory leak in openSUSE wicked 0.6.55 and earlier allows network attackers to cause a denial of service by sending DHCP4 packets with a different client-id.

An ni_dhcp4_parse_response memory leak in openSUSE wicked 0.6.55 and earlier allows network attackers to cause a denial of service by sending DHCP4 packets without a message type option.

A memory leak exists in Palo Alto Networks PAN-OS software that enables an attacker to send a burst of crafted packets through the firewall that eventually prevents the firewall from processing traffic. This issue applies only to PA-5400 Series devices that are running PAN-OS software with the SSL Forward Proxy feature enabled.

An exploitable denial-of-service vulnerability exists in the resource allocation handling of Videolabs libmicrodns 0.1.0. When encountering errors while parsing mDNS messages, some allocated data is not freed, possibly leading to a denial-of-service condition via resource exhaustion. An attacker can send one mDNS message repeatedly to trigger this vulnerability through decoding of the domain name performed by rr_decode.

On BIG-IP 15.0.0-15.0.1, 14.1.0-14.1.2.3, 14.0.0-14.0.1, and 13.1.0-13.1.3.1, when a virtual server is configured with HTTP explicit proxy and has an attached HTTP_PROXY_REQUEST iRule, POST requests sent to the virtual server cause an xdata memory leak.

An exploitable denial-of-service vulnerability exists in the resource allocation handling of Videolabs libmicrodns 0.1.0. When encountering errors while parsing mDNS messages, some allocated data is not freed, possibly leading to a denial-of-service condition via resource exhaustion. An attacker can send one mDNS message repeatedly to trigger this vulnerability through the function rr_read_RR [5] reads the current resource record, except for the RDATA section. This is read by the loop at in rr_read. For each RR type, a different function is called. When the RR type is 0x10, the function rr_read_TXT is called at [6].

In BIG-IP APM versions 12.1.0-12.1.5.1 and 11.6.1-11.6.5.2, RADIUS authentication leaks memory when the username for authentication is not set.

A vulnerability in the processing of inbound IPv6 packets in Juniper Networks Junos OS on QFX5000 Series and EX4600 switches may cause the memory to not be freed, leading to a packet DMA memory leak, and eventual Denial of Service (DoS) condition. Once the condition occurs, further packet processing will be impacted, creating a sustained Denial of Service (DoS) condition. The following error logs may be observed using the "show heap" command and the device may eventually run out of memory if such packets are received continuously. Jan 12 12:00:00 device-name fpc0 (buf alloc) failed allocating packet buffer Jan 12 12:00:01 device-name fpc0 (buf alloc) failed allocating packet buffer user@device-name> request pfe execute target fpc0 timeout 30 command "show heap" ID Base Total(b) Free(b) Used(b) % Name -- ---------- ----------- ----------- ----------- --- ----------- 0 246fc1a8 536870488 353653752 183216736 34 Kernel 1 91800000 16777216 12069680 4707536 28 DMA 2 92800000 75497472 69997640 5499832 7 PKT DMA DESC 3 106fc000 335544320 221425960 114118360 34 Bcm_sdk 4 97000000 176160768 200 176160568 99 Packet DMA <<<<<<<<<<<<<< 5 903fffe0 20971504 20971504 0 0 Blob This issue affects Juniper Networks Junos OS on QFX5000 Series, EX4600: 18.3R3 versions prior to 18.3R3-S6; 18.4 versions prior to 18.4R2-S9, 18.4R3-S9; 19.1 versions prior to 19.1R2-S3, 19.1R3-S7; 19.2 versions prior to 19.2R1-S8, 19.2R3-S3; 19.3 versions prior to 19.3R2-S7, 19.3R3-S4; 19.4 versions prior to 19.4R2-S5, 19.4R3-S6; 20.1 versions prior to 20.1R3-S1; 20.2 versions prior to 20.2R3-S2; 20.3 versions prior to 20.3R3-S1; 20.4 versions prior to 20.4R3; 21.1 versions prior to 21.1R2-S1, 21.1R3; 21.2 versions prior to 21.2R1-S1, 21.2R2. This issue does not affect Juniper Networks Junos OS: Any versions prior to 17.4R3; 18.1 versions prior to 18.1R3-S6; 18.2 versions prior to 18.2R3; 18.3 versions prior to 18.3R3; 18.4 versions prior to 18.4R2; 19.1 versions prior to 19.1R2.

Adobe Acrobat and Reader versions 2019.021.20061 and earlier, 2017.011.30156 and earlier, 2017.011.30156 and earlier, and 2015.006.30508 and earlier have a stack exhaustion vulnerability. Successful exploitation could lead to memory leak .

IBM MQ, IBM MQ Appliance, IBM MQ for HPE NonStop 8.0, 9.1 CD, and 9.1 LTS could allow an attacker to cause a denial of service due to a memory leak caused by an error creating a dynamic queue. IBM X-Force ID: 179080.

Potential memory leak in modem during the processing of NSA RRC Reconfiguration with invalid Radio Bearer Config in Snapdragon Auto, Snapdragon Compute, Snapdragon Connectivity, Snapdragon Mobile

Adobe Acrobat and Reader versions 2019.021.20061 and earlier, 2017.011.30156 and earlier, 2017.011.30156 and earlier, and 2015.006.30508 and earlier have a stack exhaustion vulnerability. Successful exploitation could lead to memory leak .

An issue was discovered in the simple-slab crate before 0.3.3 for Rust. remove() has an off-by-one error, causing memory leakage and a drop of uninitialized memory.

A Missing Release of Memory after Effective Lifetime vulnerability in the kernel of Juniper Networks Junos OS allows an unauthenticated network based attacker to cause a Denial of Service (DoS). On all Junos platforms, the Kernel Routing Table (KRT) queue can get stuck due to a memory leak triggered by interface flaps or route churn leading to RIB and PFEs getting out of sync. The memory leak causes RTNEXTHOP/route and next-hop memory pressure issue and the KRT queue will eventually get stuck with the error- 'ENOMEM -- Cannot allocate memory'. The out-of-sync state between RIB and FIB can be seen with the "show route" and "show route forwarding-table" command. This issue will lead to failures for adding new routes. The KRT queue status can be checked using the CLI command "show krt queue": user@host > show krt state High-priority add queue: 1 queued ADD nhtype Router index 0 (31212) error 'ENOMEM -- Cannot allocate memory' kqp '0x8ad5e40' The following messages will be observed in /var/log/messages, which indicate high memory for routes/nexthops: host rpd[16279]: RPD_RT_HWM_NOTICE: New RIB highwatermark for routes: 266 [2022-03-04 05:06:07] host rpd[16279]: RPD_KRT_Q_RETRIES: nexthop ADD: Cannot allocate memory host rpd[16279]: RPD_KRT_Q_RETRIES: nexthop ADD: Cannot allocate memory host kernel: rts_veto_net_delayed_unref_limit: Route/nexthop memory is severe pressure. User Application to perform recovery actions. O p 8 err 12, rtsm_id 0:-1, msg type 10, veto simulation: 0. host kernel: rts_veto_net_delayed_unref_limit: Memory usage of M_RTNEXTHOP type = (806321208) Max size possible for M_RTNEXTHOP type = (689432176) Current delayed unref = (0), Max delayed unref on this platform = (120000) Current delayed weight unref = (0) Max delayed weight unref on this platform = (400000) curproc = rpd. This issue affects: Juniper Networks Junos OS 21.2 versions prior to 21.2R3; 21.3 versions prior to 21.3R2-S1, 21.3R3; 21.4 versions prior to 21.4R1-S2, 21.4R2; This issue does not affect Juniper Networks Junos OS versions prior to 21.2R1.

smtpd/table.c in OpenSMTPD before 6.8.0p1 lacks a certain regfree, which might allow attackers to trigger a "very significant" memory leak via messages to an instance that performs many regex lookups.

A vulnerability in the VPN System Logging functionality for Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a memory leak that can deplete system memory over time, which can cause unexpected system behaviors or device crashes. The vulnerability is due to the system memory not being properly freed for a VPN System Logging event generated when a VPN session is created or deleted. An attacker could exploit this vulnerability by repeatedly creating or deleting a VPN tunnel connection, which could leak a small amount of system memory for each logging event. A successful exploit could allow the attacker to cause system memory depletion, which can lead to a systemwide denial of service (DoS) condition. The attacker does not have any control of whether VPN System Logging is configured or not on the device, but it is enabled by default.

A vulnerability in the SSL/TLS session handler of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to a memory leak when closing SSL/TLS connections in a specific state. An attacker could exploit this vulnerability by establishing several SSL/TLS sessions and ensuring they are closed under certain conditions. A successful exploit could allow the attacker to exhaust memory resources in the affected device, which would prevent it from processing new SSL/TLS connections, resulting in a DoS. Manual intervention is required to recover an affected device.

A vulnerability in the Open Shortest Path First (OSPF) implementation in Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a memory leak on an affected device. The vulnerability is due to incorrect processing of certain OSPF packets. An attacker could exploit this vulnerability by sending a series of crafted OSPF packets to be processed by an affected device. A successful exploit could allow the attacker to continuously consume memory on an affected device and eventually cause it to reload, resulting in a denial of service (DoS) condition.

IBM Sterling External Authentication Server and IBM Sterling Secure Proxy 6.0.3.0, 6.0.2.0, and 3.4.3.2 could allow a remote user to consume resources causing a denial of service due to a resource leak. IBM X-Force ID: 219395.