Certain NETGEAR devices are affected by stored XSS. This affects GS108Tv2 before 5.4.2.36 and GS110TPv2 before 5.4.2.36.

Certain NETGEAR devices are affected by reflected XSS. This affects CBR40 before 2.5.0.10, EAX20 before 1.0.0.32, EAX80 before 1.0.1.62, EX6120 before 1.0.0.64, EX6130 before 1.0.0.44, EX7000 before 1.0.1.104, EX7500 before 1.0.0.72, R7000 before 1.0.11.110, R7900 before 1.0.4.30, R7960P before 1.4.1.66, R8000 before 1.0.4.62, RAX200 before 1.0.2.102, XR300 before 1.0.3.50, EX3700 before 1.0.0.90, MR60 before 1.0.5.102, R7000P before 1.3.2.126, R8000P before 1.4.1.66, RAX20 before 1.0.1.64, RAX50 before 1.0.2.28, RAX80 before 1.0.3.102, EX3800 before 1.0.0.90, MS60 before 1.0.5.102, R6900P before 1.3.2.126, R7900P before 1.4.1.66, RAX15 before 1.0.1.64, RAX45 before 1.0.2.28, RAX75 before 1.0.3.102, RBR750 before 3.2.16.6, RBR850 before 3.2.16.6, RBS750 before 3.2.16.6, RBS850 before 3.2.16.6, RBK752 before 3.2.16.6, and RBK852 before 3.2.16.6.

Certain NETGEAR devices are affected by reflected XSS. This affects M4300-28G before 12.0.2.15, M4300-52G before 12.0.2.15, M4300-28G-POE+ before 12.0.2.15, M4300-52G-POE+ before 12.0.2.15, M4300-8X8F before 12.0.2.15, M4300-12X12F before 12.0.2.15, M4300-24X24F before 12.0.2.15, M4300-24X before 12.0.2.15, M4300-48X before 12.0.2.15, and M4200 before 12.0.2.15.

Certain NETGEAR devices are affected by reflected XSS. This affects M4300-28G before 12.0.2.15, M4300-52G before 12.0.2.15, M4300-28G-POE+ before 12.0.2.15, M4300-52G-POE+ before 12.0.2.15, M4300-8X8F before 12.0.2.15, M4300-12X12F before 12.0.2.15, M4300-24X24F before 12.0.2.15, M4300-24X before 12.0.2.15, M4300-48X before 12.0.2.15, and M4200 before 12.0.2.15.

Certain NETGEAR devices are affected by reflected XSS. This affects M4300-28G before 12.0.2.15, M4300-52G before 12.0.2.15, M4300-28G-POE+ before 12.0.2.15, M4300-52G-POE+ before 12.0.2.15, M4300-8X8F before 12.0.2.15, M4300-12X12F before 12.0.2.15, M4300-24X24F before 12.0.2.15, M4300-24X before 12.0.2.15, M4300-48X before 12.0.2.15, and M4200 before 12.0.2.15.

Certain NETGEAR devices are affected by stored XSS. This affects D6400 before 1.0.0.60, D7000 before 1.0.1.50, D8500 before 1.0.3.29, EX6200 before 1.0.3.84, EX7000 before 1.0.0.60, R6250 before 1.0.4.16, R6300v2 before 1.0.4.18, R6400 before 1.01.32, R6400v2 before 1.0.2.44, R6700 before 1.0.1.36, R6900 before 1.0.1.34, R6900P before 1.3.0.8, R7000 before 1.0.9.14, R7000P before 1.3.0.8, R7100LG before 1.0.0.34, R7300DST before 1.0.0.56, R7900 before 1.0.1.26, R8000 before 1.0.4.4, R8300 before 1.0.2.106, R8500 before 1.0.2.106, R9000 before 1.0.2.52, WNDR3400v3 before 1.0.1.16, WNR3500Lv2 before 1.2.0.46, and WNDR3700v5 before 1.1.0.48.

Certain NETGEAR devices are affected by stored XSS. This affects R6400 before 1.0.1.14, R6700 before 1.0.1.22, R6900 before 1.0.1.22, R7000 before 1.0.9.4, R7100LG before 1.0.0.32, R7300DST before 1.0.0.56, R7900 before 1.0.1.12, R8000 before 1.0.3.24, and R8500 before 1.0.2.74.

Certain NETGEAR devices are affected by reflected XSS. This affects EX3700 before 1.0.0.66, EX3800 before 1.0.0.66, EX6100 before 1.0.2.20, EX6120 before 1.0.0.34, EX6150 before 1.0.0.36, EX6200 before 1.0.3.84, and EX7000 before 1.0.0.60.

Certain NETGEAR devices are affected by reflected XSS. This affects R6700 before 1.0.1.36 and R6900 before 1.0.1.34.

Certain NETGEAR devices are affected by XSS. This affects D6200 before 1.1.00.24, D7000 before 1.0.1.52, JNR1010v2 before 1.1.0.44, JWNR2010v5 before 1.1.0.44, PR2000 before 1.0.0.20, R6020 before 1.0.0.26, R6050 before 1.0.1.12, R6080 before 1.0.0.26, R6120 before 1.0.0.36, R6220 before 1.1.0.60, R6700v2 before 1.2.0.12, R6800 before 1.2.0.12, R6900v2 before 1.2.0.12, WNDR3700v5 before 1.1.0.50, WNR1000v4 before 1.1.0.44, WNR2020 before 1.1.0.44, and WNR2050 before 1.1.0.44.

Certain NETGEAR devices are affected by reflected XSS. This affects R6700v2 before 1.1.0.42 and R6800 before 1.1.0.42.

Certain NETGEAR devices are affected by stored XSS. This affects R9000 before 1.0.2.40, R6100 before 1.0.1.1, 6R7500 before 1.0.0.110, R7500v2 before 1.0.3.20, R7800 before 1.0.2.36, WNDR4300v2 before 1.0.0.48, and WNR2000v5 before 1.0.0.58.

Certain NETGEAR devices are affected by XSS. This affects D6200 before 1.1.00.24, D7000 before 1.0.1.52, JNR1010v2 before 1.1.0.44, JR6150 before 1.0.1.12, JWNR2010v5 before 1.1.0.44, PR2000 before 1.0.0.20, R6020 before 1.0.0.26, R6050 before 1.0.1.12, R6080 before 1.0.0.26, R6120 before 1.0.0.36, R6220 before 1.1.0.60, R6700v2 before 1.2.0.12, R6800 before 1.2.0.12, R6900v2 before 1.2.0.12, WNDR3700v5 before 1.1.0.50, WNR1000v4 before 1.1.0.44, WNR2020 before 1.1.0.44, and WNR2050 before 1.1.0.44.

Unauthenticated cross-site scripting (XSS) in Netgear WAC120 AC Access Point may lead to mulitple attacks like session hijacking even clipboard hijacking.

NETGEAR JGS516PE devices before 2.6.0.43 are affected by reflected XSS.

Certain NETGEAR devices are affected by stored XSS. This affects D7800 before 1.0.1.56, R7800 before 1.0.2.68, R8900 before 1.0.4.26, R9000 before 1.0.4.26, RAX120 before 1.0.0.78, RBK20 before 2.3.5.26, RBR20 before 2.3.5.26, RBS20 before 2.3.5.26, RBK40 before 2.3.5.30, RBR40 before 2.3.5.30, RBS40 before 2.3.5.30, RBK50 before 2.3.5.30, RBR50 before 2.3.5.30, RBS50 before 2.3.5.30, and XR500 before 2.3.2.56.

A vulnerability exists in Netgear CG3100 devices before 3.9.2421.13.mp3 V0027 via an embed malicious script in an unspecified page, which could let a malicious user obtain sensitive information.

Cross-site scripting (XSS) vulnerability in cgi-bin/welcome (aka the login page) in Netgear SSL312 PROSAFE SSL VPN-Concentrator 25 allows remote attackers to inject arbitrary web script or HTML via the err parameter in the context of an error page.

A vulnerability classified as problematic has been found in Netgear SRX5308 up to 4.3.5-3. This affects an unknown part of the component Web Management Interface. The manipulation of the argument Login.userAgent leads to cross site scripting. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-227673 was assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability classified as problematic was found in Netgear SRX5308 up to 4.3.5-3. This vulnerability affects unknown code of the component Web Management Interface. The manipulation of the argument USERDBUsers.Password leads to cross site scripting. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. VDB-227674 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

NETGEAR R9000 devices before 1.0.4.26 are affected by stored XSS.

Certain NETGEAR devices are affected by reflected XSS. This affects EX7000 before 1.0.0.64, EX6200 before 1.0.3.86, EX6150 before 1.0.0.38, EX6130 before 1.0.0.22, EX6120 before 1.0.0.40, EX6100 before 1.0.2.22, EX6000 before 1.0.0.30, EX3700 before 1.0.0.70, EX3800 before 1.0.0.70, R8300 before 1.0.2.94, R7300DST before 1.0.0.62, R7000P before 1.3.0.20, R6900P before 1.3.0.20, R6400 before 1.0.1.32, R6300v2 before 1.0.4.24, R8500 before 1.0.2.94, WNDR3400v3 before 1.0.1.18, and WN2500RPv2 before 1.0.1.52.

NETGEAR JNR1010 devices before 1.0.0.32 allow webproc?getpage= XSS.

An issue was discovered on NETGEAR WNR1000V4 1.1.0.54 devices. Multiple pages (setup.cgi and adv_index.htm) within the web management console are vulnerable to stored XSS, as demonstrated by the configuration of the UI language.

NETGEAR WAC510 devices before 8.0.1.3 are affected by stored XSS.

NETGEAR WAC510 devices before 8.0.1.3 are affected by stored XSS.

In NETGEAR Nighthawk X10-R900 prior to 1.0.4.24, by sending a DHCP discover request containing a malicious hostname field, an attacker may execute stored XSS attacks against this device. When the malicious DHCP request is received, the device will generate a log entry containing the malicious hostname. This log entry may then be viewed at Advanced settings->Administration->Logs to trigger the exploit. Although this value is inserted into a textarea tag, converted to all-caps, and limited in length, attacks are still possible.

NETGEAR EX7000 V1.0.0.42_1.0.94 devices allow XSS via the SSID.

Certain NETGEAR devices are affected by stored XSS. This affects D7800 before 1.0.1.34, DM200 before 1.0.0.52, R6100 before 1.0.1.22, R7500 before 1.0.0.122, R7500v2 before 1.0.3.26, R7800 before 1.0.2.42, R8900 before 1.0.4.2, R9000 before 1.0.3.16, WNDR4300 before 1.0.2.98, WNDR4300v2 before 1.0.0.54, WNDR4500v3 before 1.0.0.54, and WNR2000v5 before 1.0.0.64.

Cross-site scripting (XSS) vulnerability in Liferay Portal Community Edition (CE) 5.x and 6.x before 6.0.6 GA allows remote authenticated users to inject arbitrary web script or HTML via a blog title.

Insufficient input sanitization in Mermaid markdown in GitLab CE/EE version 11.4 and up allows an attacker to exploit a stored cross-site scripting vulnerability via a specially-crafted markdown

Cross-site scripting (XSS) vulnerability in the EditNews function in ManageNews.php in Simple Machines Forum (SMF) before 1.1.13, and 2.x before 2.0 RC5, might allow remote authenticated users to inject arbitrary web script or HTML via a save_items action.

Authenticated (admin+) Stored Cross-Site Scripting (XSS) vulnerability in Christian Salazar's add2fav plugin <= 1.0 at WordPress.

On BIG-IP AFM version 15.1.x before 15.1.1, 14.1.x before 14.1.3.1, and 13.1.x before 13.1.3.5, authenticated users accessing the Configuration utility for AFM are vulnerable to a cross-site scripting attack if they attempt to access a maliciously-crafted URL. Note: Software versions which have reached End of Software Development (EoSD) are not evaluated.

The Simple Basic Contact Form WordPress plugin before 20250114 does not sanitise and escape some of its settings, which could allow high privilege users such as admin to perform Stored Cross-Site Scripting attacks even when the unfiltered_html capability is disallowed (for example in multisite setup).

Cross-site scripting (XSS) vulnerability in Liferay Portal Community Edition (CE) 6.x before 6.0.6 GA, when Apache Tomcat is used, allows remote authenticated users to inject arbitrary web script or HTML via a message title, a different vulnerability than CVE-2004-2030.

Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in Drupal Tooltip allows Cross-Site Scripting (XSS).This issue affects Tooltip: from 0.0.0 before 1.1.2.

The Ditty WordPress plugin before 3.1.52 does not sanitise and escape some of its settings, which could allow high privilege users such as author to perform Stored Cross-Site Scripting attacks even when the unfiltered_html capability is disallowed (for example in multisite setup).

An issue has been discovered in GitLab affecting all versions starting with 13.10. GitLab was vulnerable to a stored XSS in blob viewer of notebooks.

cPanel before 74.0.8 allows self XSS in the Site Software Moderation interface (SEC-434).

cPanel before 60.0.25 allows self XSS in the tail_ea4_migration.cgi interface (SEC-172).

SAP Business One, 9.2, 9.3, browser access does not sufficiently encode user controlled inputs, which results in a Cross-Site Scripting (XSS) vulnerability.

An XSS issue was discovered in admin/content/editcontent?id=29&gopage=1 in YUNUCMS 1.1.5.

The Top Comments WordPress plugin through 1.0 does not sanitise and escape some of its settings, which could allow high privilege users such as admin to perform Stored Cross-Site Scripting attacks even when the unfiltered_html capability is disallowed (for example in multisite setup).

A vulnerability was found in Thomson TCW710 ST5D.10.05. It has been classified as problematic. This affects an unknown part of the file /goform/RgDhcp. The manipulation of the argument PppUserName with the input ><script>alert(1)</script> as part of POST Request leads to cross site scripting (Persistent). It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used.

cPanel before 60.0.25 allows stored XSS in the ftp_sessions API (SEC-180).

Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in Drupal Coffee allows Cross-Site Scripting (XSS).This issue affects Coffee: from 0.0.0 before 1.4.0.

The WP Triggers Lite WordPress plugin through 2.5.3 does not sanitize and escape a parameter before using it in a SQL statement, allowing admins to perform SQL injection attacks

The Prisna GWT WordPress plugin before 1.4.14 does not sanitise and escape some of its settings, which could allow high privilege users such as admin to perform Stored Cross-Site Scripting attacks even when the unfiltered_html capability is disallowed (for example in multisite setup).