In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btrtl: fix out of bounds memory access The problem is detected by KASAN. btrtl driver uses private hci data to store 'struct btrealtek_data'. If btrtl driver is used with btusb, then memory for private hci data is allocated in btusb. But no private data is allocated after hci_dev, when btrtl is used with hci_h5. This commit adds memory allocation for hci_h5 case. ================================================================== BUG: KASAN: slab-out-of-bounds in btrtl_initialize+0x6cc/0x958 [btrtl] Write of size 8 at addr ffff00000f5a5748 by task kworker/u9:0/76 Hardware name: Pine64 PinePhone (1.2) (DT) Workqueue: hci0 hci_power_on [bluetooth] Call trace: dump_backtrace+0x9c/0x128 show_stack+0x20/0x38 dump_stack_lvl+0x48/0x60 print_report+0xf8/0x5d8 kasan_report+0x90/0xd0 __asan_store8+0x9c/0xc0 [btrtl] h5_btrtl_setup+0xd0/0x2f8 [hci_uart] h5_setup+0x50/0x80 [hci_uart] hci_uart_setup+0xd4/0x260 [hci_uart] hci_dev_open_sync+0x1cc/0xf68 [bluetooth] hci_dev_do_open+0x34/0x90 [bluetooth] hci_power_on+0xc4/0x3c8 [bluetooth] process_one_work+0x328/0x6f0 worker_thread+0x410/0x778 kthread+0x168/0x178 ret_from_fork+0x10/0x20 Allocated by task 53: kasan_save_stack+0x3c/0x68 kasan_save_track+0x20/0x40 kasan_save_alloc_info+0x68/0x78 __kasan_kmalloc+0xd4/0xd8 __kmalloc+0x1b4/0x3b0 hci_alloc_dev_priv+0x28/0xa58 [bluetooth] hci_uart_register_device+0x118/0x4f8 [hci_uart] h5_serdev_probe+0xf4/0x178 [hci_uart] serdev_drv_probe+0x54/0xa0 really_probe+0x254/0x588 __driver_probe_device+0xc4/0x210 driver_probe_device+0x64/0x160 __driver_attach_async_helper+0x88/0x158 async_run_entry_fn+0xd0/0x388 process_one_work+0x328/0x6f0 worker_thread+0x410/0x778 kthread+0x168/0x178 ret_from_fork+0x10/0x20 Last potentially related work creation: kasan_save_stack+0x3c/0x68 __kasan_record_aux_stack+0xb0/0x150 kasan_record_aux_stack_noalloc+0x14/0x20 __queue_work+0x33c/0x960 queue_work_on+0x98/0xc0 hci_recv_frame+0xc8/0x1e8 [bluetooth] h5_complete_rx_pkt+0x2c8/0x800 [hci_uart] h5_rx_payload+0x98/0xb8 [hci_uart] h5_recv+0x158/0x3d8 [hci_uart] hci_uart_receive_buf+0xa0/0xe8 [hci_uart] ttyport_receive_buf+0xac/0x178 flush_to_ldisc+0x130/0x2c8 process_one_work+0x328/0x6f0 worker_thread+0x410/0x778 kthread+0x168/0x178 ret_from_fork+0x10/0x20 Second to last potentially related work creation: kasan_save_stack+0x3c/0x68 __kasan_record_aux_stack+0xb0/0x150 kasan_record_aux_stack_noalloc+0x14/0x20 __queue_work+0x788/0x960 queue_work_on+0x98/0xc0 __hci_cmd_sync_sk+0x23c/0x7a0 [bluetooth] __hci_cmd_sync+0x24/0x38 [bluetooth] btrtl_initialize+0x760/0x958 [btrtl] h5_btrtl_setup+0xd0/0x2f8 [hci_uart] h5_setup+0x50/0x80 [hci_uart] hci_uart_setup+0xd4/0x260 [hci_uart] hci_dev_open_sync+0x1cc/0xf68 [bluetooth] hci_dev_do_open+0x34/0x90 [bluetooth] hci_power_on+0xc4/0x3c8 [bluetooth] process_one_work+0x328/0x6f0 worker_thread+0x410/0x778 kthread+0x168/0x178 ret_from_fork+0x10/0x20 ==================================================================

The eBPF ALU32 bounds tracking for bitwise ops (AND, OR and XOR) in the Linux kernel did not properly update 32-bit bounds, which could be turned into out of bounds reads and writes in the Linux kernel and therefore, arbitrary code execution. This issue was fixed via commit 049c4e13714e ("bpf: Fix alu32 const subreg bound tracking on bitwise operations") (v5.13-rc4) and backported to the stable kernels in v5.12.4, v5.11.21, and v5.10.37. The AND/OR issues were introduced by commit 3f50f132d840 ("bpf: Verifier, do explicit ALU32 bounds tracking") (5.7-rc1) and the XOR variant was introduced by 2921c90d4718 ("bpf:Fix a verifier failure with xor") ( 5.10-rc1).

In the Linux kernel, the following vulnerability has been resolved: net/sched: fq_pie: fix OOB access in the traffic path the following script: # tc qdisc add dev eth0 handle 0x1 root fq_pie flows 2 # tc qdisc add dev eth0 clsact # tc filter add dev eth0 egress matchall action skbedit priority 0x10002 # ping 192.0.2.2 -I eth0 -c2 -w1 -q produces the following splat: BUG: KASAN: slab-out-of-bounds in fq_pie_qdisc_enqueue+0x1314/0x19d0 [sch_fq_pie] Read of size 4 at addr ffff888171306924 by task ping/942 CPU: 3 PID: 942 Comm: ping Not tainted 5.12.0+ #441 Hardware name: Red Hat KVM, BIOS 1.11.1-4.module+el8.1.0+4066+0f1aadab 04/01/2014 Call Trace: dump_stack+0x92/0xc1 print_address_description.constprop.7+0x1a/0x150 kasan_report.cold.13+0x7f/0x111 fq_pie_qdisc_enqueue+0x1314/0x19d0 [sch_fq_pie] __dev_queue_xmit+0x1034/0x2b10 ip_finish_output2+0xc62/0x2120 __ip_finish_output+0x553/0xea0 ip_output+0x1ca/0x4d0 ip_send_skb+0x37/0xa0 raw_sendmsg+0x1c4b/0x2d00 sock_sendmsg+0xdb/0x110 __sys_sendto+0x1d7/0x2b0 __x64_sys_sendto+0xdd/0x1b0 do_syscall_64+0x3c/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7fe69735c3eb Code: 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 f3 0f 1e fa 48 8d 05 75 42 2c 00 41 89 ca 8b 00 85 c0 75 14 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 75 c3 0f 1f 40 00 41 57 4d 89 c7 41 56 41 89 RSP: 002b:00007fff06d7fb38 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 000055e961413700 RCX: 00007fe69735c3eb RDX: 0000000000000040 RSI: 000055e961413700 RDI: 0000000000000003 RBP: 0000000000000040 R08: 000055e961410500 R09: 0000000000000010 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fff06d81260 R13: 00007fff06d7fb40 R14: 00007fff06d7fc30 R15: 000055e96140f0a0 Allocated by task 917: kasan_save_stack+0x19/0x40 __kasan_kmalloc+0x7f/0xa0 __kmalloc_node+0x139/0x280 fq_pie_init+0x555/0x8e8 [sch_fq_pie] qdisc_create+0x407/0x11b0 tc_modify_qdisc+0x3c2/0x17e0 rtnetlink_rcv_msg+0x346/0x8e0 netlink_rcv_skb+0x120/0x380 netlink_unicast+0x439/0x630 netlink_sendmsg+0x719/0xbf0 sock_sendmsg+0xe2/0x110 ____sys_sendmsg+0x5ba/0x890 ___sys_sendmsg+0xe9/0x160 __sys_sendmsg+0xd3/0x170 do_syscall_64+0x3c/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae The buggy address belongs to the object at ffff888171306800 which belongs to the cache kmalloc-256 of size 256 The buggy address is located 36 bytes to the right of 256-byte region [ffff888171306800, ffff888171306900) The buggy address belongs to the page: page:00000000bcfb624e refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x171306 head:00000000bcfb624e order:1 compound_mapcount:0 flags: 0x17ffffc0010200(slab|head|node=0|zone=2|lastcpupid=0x1fffff) raw: 0017ffffc0010200 dead000000000100 dead000000000122 ffff888100042b40 raw: 0000000000000000 0000000000100010 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff888171306800: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff888171306880: 00 00 00 00 00 00 00 00 00 00 00 00 fc fc fc fc >ffff888171306900: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ^ ffff888171306980: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff888171306a00: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fix fq_pie traffic path to avoid selecting 'q->flows + q->flows_cnt' as a valid flow: it's an address beyond the allocated memory.

In the Linux kernel, the following vulnerability has been resolved: isofs: Fix out of bound access for corrupted isofs image When isofs image is suitably corrupted isofs_read_inode() can read data beyond the end of buffer. Sanity-check the directory entry length before using it.

In the Linux kernel, the following vulnerability has been resolved: kvm: avoid speculation-based attacks from out-of-range memslot accesses KVM's mechanism for accessing guest memory translates a guest physical address (gpa) to a host virtual address using the right-shifted gpa (also known as gfn) and a struct kvm_memory_slot. The translation is performed in __gfn_to_hva_memslot using the following formula: hva = slot->userspace_addr + (gfn - slot->base_gfn) * PAGE_SIZE It is expected that gfn falls within the boundaries of the guest's physical memory. However, a guest can access invalid physical addresses in such a way that the gfn is invalid. __gfn_to_hva_memslot is called from kvm_vcpu_gfn_to_hva_prot, which first retrieves a memslot through __gfn_to_memslot. While __gfn_to_memslot does check that the gfn falls within the boundaries of the guest's physical memory or not, a CPU can speculate the result of the check and continue execution speculatively using an illegal gfn. The speculation can result in calculating an out-of-bounds hva. If the resulting host virtual address is used to load another guest physical address, this is effectively a Spectre gadget consisting of two consecutive reads, the second of which is data dependent on the first. Right now it's not clear if there are any cases in which this is exploitable. One interesting case was reported by the original author of this patch, and involves visiting guest page tables on x86. Right now these are not vulnerable because the hva read goes through get_user(), which contains an LFENCE speculation barrier. However, there are patches in progress for x86 uaccess.h to mask kernel addresses instead of using LFENCE; once these land, a guest could use speculation to read from the VMM's ring 3 address space. Other architectures such as ARM already use the address masking method, and would be susceptible to this same kind of data-dependent access gadgets. Therefore, this patch proactively protects from these attacks by masking out-of-bounds gfns in __gfn_to_hva_memslot, which blocks speculation of invalid hvas. Sean Christopherson noted that this patch does not cover kvm_read_guest_offset_cached. This however is limited to a few bytes past the end of the cache, and therefore it is unlikely to be useful in the context of building a chain of data dependent accesses.

In the Linux kernel, the following vulnerability has been resolved: jfs: fix slab-out-of-bounds read in ea_get() During the "size_check" label in ea_get(), the code checks if the extended attribute list (xattr) size matches ea_size. If not, it logs "ea_get: invalid extended attribute" and calls print_hex_dump(). Here, EALIST_SIZE(ea_buf->xattr) returns 4110417968, which exceeds INT_MAX (2,147,483,647). Then ea_size is clamped: int size = clamp_t(int, ea_size, 0, EALIST_SIZE(ea_buf->xattr)); Although clamp_t aims to bound ea_size between 0 and 4110417968, the upper limit is treated as an int, causing an overflow above 2^31 - 1. This leads "size" to wrap around and become negative (-184549328). The "size" is then passed to print_hex_dump() (called "len" in print_hex_dump()), it is passed as type size_t (an unsigned type), this is then stored inside a variable called "int remaining", which is then assigned to "int linelen" which is then passed to hex_dump_to_buffer(). In print_hex_dump() the for loop, iterates through 0 to len-1, where len is 18446744073525002176, calling hex_dump_to_buffer() on each iteration: for (i = 0; i < len; i += rowsize) { linelen = min(remaining, rowsize); remaining -= rowsize; hex_dump_to_buffer(ptr + i, linelen, rowsize, groupsize, linebuf, sizeof(linebuf), ascii); ... } The expected stopping condition (i < len) is effectively broken since len is corrupted and very large. This eventually leads to the "ptr+i" being passed to hex_dump_to_buffer() to get closer to the end of the actual bounds of "ptr", eventually an out of bounds access is done in hex_dump_to_buffer() in the following for loop: for (j = 0; j < len; j++) { if (linebuflen < lx + 2) goto overflow2; ch = ptr[j]; ... } To fix this we should validate "EALIST_SIZE(ea_buf->xattr)" before it is utilised.

In the Linux kernel, the following vulnerability has been resolved: media: uvcvideo: Fix OOB read If the index provided by the user is bigger than the mask size, we might do an out of bound read.

In the Linux kernel, the following vulnerability has been resolved: thermal: intel: powerclamp: fix mismatch in get function for max_idle KASAN reported this [ 444.853098] BUG: KASAN: global-out-of-bounds in param_get_int+0x77/0x90 [ 444.853111] Read of size 4 at addr ffffffffc16c9220 by task cat/2105 ... [ 444.853442] The buggy address belongs to the variable: [ 444.853443] max_idle+0x0/0xffffffffffffcde0 [intel_powerclamp] There is a mismatch between the param_get_int and the definition of max_idle. Replacing param_get_int with param_get_byte resolves this issue.

In the Linux kernel, the following vulnerability has been resolved: x86/alternatives: Disable KASAN in apply_alternatives() Fei has reported that KASAN triggers during apply_alternatives() on a 5-level paging machine: BUG: KASAN: out-of-bounds in rcu_is_watching() Read of size 4 at addr ff110003ee6419a0 by task swapper/0/0 ... __asan_load4() rcu_is_watching() trace_hardirqs_on() text_poke_early() apply_alternatives() ... On machines with 5-level paging, cpu_feature_enabled(X86_FEATURE_LA57) gets patched. It includes KASAN code, where KASAN_SHADOW_START depends on __VIRTUAL_MASK_SHIFT, which is defined with cpu_feature_enabled(). KASAN gets confused when apply_alternatives() patches the KASAN_SHADOW_START users. A test patch that makes KASAN_SHADOW_START static, by replacing __VIRTUAL_MASK_SHIFT with 56, works around the issue. Fix it for real by disabling KASAN while the kernel is patching alternatives. [ mingo: updated the changelog ]

In the Linux kernel, the following vulnerability has been resolved: i3c: mipi-i3c-hci: Fix out of bounds access in hci_dma_irq_handler Do not loop over ring headers in hci_dma_irq_handler() that are not allocated and enabled in hci_dma_init(). Otherwise out of bounds access will occur from rings->headers[i] access when i >= number of allocated ring headers.

In the Linux kernel, the following vulnerability has been resolved: HID: intel-ish-hid: ipc: Disable and reenable ACPI GPE bit The EHL (Elkhart Lake) based platforms provide a OOB (Out of band) service, which allows to wakup device when the system is in S5 (Soft-Off state). This OOB service can be enabled/disabled from BIOS settings. When enabled, the ISH device gets PME wake capability. To enable PME wakeup, driver also needs to enable ACPI GPE bit. On resume, BIOS will clear the wakeup bit. So driver need to re-enable it in resume function to keep the next wakeup capability. But this BIOS clearing of wakeup bit doesn't decrement internal OS GPE reference count, so this reenabling on every resume will cause reference count to overflow. So first disable and reenable ACPI GPE bit using acpi_disable_gpe().

In the Linux kernel, the following vulnerability has been resolved: s390/ptrace: handle setting of fpc register correctly If the content of the floating point control (fpc) register of a traced process is modified with the ptrace interface the new value is tested for validity by temporarily loading it into the fpc register. This may lead to corruption of the fpc register of the tracing process: if an interrupt happens while the value is temporarily loaded into the fpc register, and within interrupt context floating point or vector registers are used, the current fp/vx registers are saved with save_fpu_regs() assuming they belong to user space and will be loaded into fp/vx registers when returning to user space. test_fp_ctl() restores the original user space fpc register value, however it will be discarded, when returning to user space. In result the tracer will incorrectly continue to run with the value that was supposed to be used for the traced process. Fix this by saving fpu register contents with save_fpu_regs() before using test_fp_ctl().

In the Linux kernel, the following vulnerability has been resolved: ring-buffer: Do not attempt to read past "commit" When iterating over the ring buffer while the ring buffer is active, the writer can corrupt the reader. There's barriers to help detect this and handle it, but that code missed the case where the last event was at the very end of the page and has only 4 bytes left. The checks to detect the corruption by the writer to reads needs to see the length of the event. If the length in the first 4 bytes is zero then the length is stored in the second 4 bytes. But if the writer is in the process of updating that code, there's a small window where the length in the first 4 bytes could be zero even though the length is only 4 bytes. That will cause rb_event_length() to read the next 4 bytes which could happen to be off the allocated page. To protect against this, fail immediately if the next event pointer is less than 8 bytes from the end of the commit (last byte of data), as all events must be a minimum of 8 bytes anyway.

In the Linux kernel, the following vulnerability has been resolved: net/sched: sch_frag: fix stack OOB read while fragmenting IPv4 packets when 'act_mirred' tries to fragment IPv4 packets that had been previously re-assembled using 'act_ct', splats like the following can be observed on kernels built with KASAN: BUG: KASAN: stack-out-of-bounds in ip_do_fragment+0x1b03/0x1f60 Read of size 1 at addr ffff888147009574 by task ping/947 CPU: 0 PID: 947 Comm: ping Not tainted 5.12.0-rc6+ #418 Hardware name: Red Hat KVM, BIOS 1.11.1-4.module+el8.1.0+4066+0f1aadab 04/01/2014 Call Trace: <IRQ> dump_stack+0x92/0xc1 print_address_description.constprop.7+0x1a/0x150 kasan_report.cold.13+0x7f/0x111 ip_do_fragment+0x1b03/0x1f60 sch_fragment+0x4bf/0xe40 tcf_mirred_act+0xc3d/0x11a0 [act_mirred] tcf_action_exec+0x104/0x3e0 fl_classify+0x49a/0x5e0 [cls_flower] tcf_classify_ingress+0x18a/0x820 __netif_receive_skb_core+0xae7/0x3340 __netif_receive_skb_one_core+0xb6/0x1b0 process_backlog+0x1ef/0x6c0 __napi_poll+0xaa/0x500 net_rx_action+0x702/0xac0 __do_softirq+0x1e4/0x97f do_softirq+0x71/0x90 </IRQ> __local_bh_enable_ip+0xdb/0xf0 ip_finish_output2+0x760/0x2120 ip_do_fragment+0x15a5/0x1f60 __ip_finish_output+0x4c2/0xea0 ip_output+0x1ca/0x4d0 ip_send_skb+0x37/0xa0 raw_sendmsg+0x1c4b/0x2d00 sock_sendmsg+0xdb/0x110 __sys_sendto+0x1d7/0x2b0 __x64_sys_sendto+0xdd/0x1b0 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f82e13853eb Code: 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 f3 0f 1e fa 48 8d 05 75 42 2c 00 41 89 ca 8b 00 85 c0 75 14 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 75 c3 0f 1f 40 00 41 57 4d 89 c7 41 56 41 89 RSP: 002b:00007ffe01fad888 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 00005571aac13700 RCX: 00007f82e13853eb RDX: 0000000000002330 RSI: 00005571aac13700 RDI: 0000000000000003 RBP: 0000000000002330 R08: 00005571aac10500 R09: 0000000000000010 R10: 0000000000000000 R11: 0000000000000246 R12: 00007ffe01faefb0 R13: 00007ffe01fad890 R14: 00007ffe01fad980 R15: 00005571aac0f0a0 The buggy address belongs to the page: page:000000001dff2e03 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x147009 flags: 0x17ffffc0001000(reserved) raw: 0017ffffc0001000 ffffea00051c0248 ffffea00051c0248 0000000000000000 raw: 0000000000000000 0000000000000000 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff888147009400: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff888147009480: f1 f1 f1 f1 04 f2 f2 f2 f2 f2 f2 f2 00 00 00 00 >ffff888147009500: 00 00 00 00 00 00 00 00 00 00 f2 f2 f2 f2 f2 f2 ^ ffff888147009580: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff888147009600: 00 00 00 00 00 00 00 00 00 00 00 00 00 f2 f2 f2 for IPv4 packets, sch_fragment() uses a temporary struct dst_entry. Then, in the following call graph: ip_do_fragment() ip_skb_dst_mtu() ip_dst_mtu_maybe_forward() ip_mtu_locked() the pointer to struct dst_entry is used as pointer to struct rtable: this turns the access to struct members like rt_mtu_locked into an OOB read in the stack. Fix this changing the temporary variable used for IPv4 packets in sch_fragment(), similarly to what is done for IPv6 few lines below.

In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: fix possible out-of-bound read in ath12k_htt_pull_ppdu_stats() len is extracted from HTT message and could be an unexpected value in case errors happen, so add validation before using to avoid possible out-of-bound read in the following message iteration and parsing. The same issue also applies to ppdu_info->ppdu_stats.common.num_users, so validate it before using too. These are found during code review. Compile test only.

A kernel data leak due to an out-of-bound read was found in the Linux kernel in inet_diag_msg_sctp{,l}addr_fill() and sctp_get_sctp_info() functions present since version 4.7-rc1 through version 4.13. A data leak happens when these functions fill in sockaddr data structures used to export socket's diagnostic information. As a result, up to 100 bytes of the slab data could be leaked to a userspace.

In the Linux kernel, the following vulnerability has been resolved: usbnet: ipheth: fix possible overflow in DPE length check Originally, it was possible for the DPE length check to overflow if wDatagramIndex + wDatagramLength > U16_MAX. This could lead to an OoB read. Move the wDatagramIndex term to the other side of the inequality. An existing condition ensures that wDatagramIndex < urb->actual_length.

In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Fix operation precedence bug in port timestamping napi_poll context Indirection (*) is of lower precedence than postfix increment (++). Logic in napi_poll context would cause an out-of-bound read by first increment the pointer address by byte address space and then dereference the value. Rather, the intended logic was to dereference first and then increment the underlying value.

In the Linux kernel, the following vulnerability has been resolved: usb: typec: fix potential out of bounds in ucsi_ccg_update_set_new_cam_cmd() The "*cmd" variable can be controlled by the user via debugfs. That means "new_cam" can be as high as 255 while the size of the uc->updated[] array is UCSI_MAX_ALTMODES (30). The call tree is: ucsi_cmd() // val comes from simple_attr_write_xsigned() -> ucsi_send_command() -> ucsi_send_command_common() -> ucsi_run_command() // calls ucsi->ops->sync_control() -> ucsi_ccg_sync_control()

In the Linux kernel, the following vulnerability has been resolved: wifi: rtw89: remove unused C2H event ID RTW89_MAC_C2H_FUNC_READ_WOW_CAM to prevent out-of-bounds reading The handler of firmware C2H event RTW89_MAC_C2H_FUNC_READ_WOW_CAM isn't implemented, but driver expects number of handlers is NUM_OF_RTW89_MAC_C2H_FUNC_WOW causing out-of-bounds access. Fix it by removing ID. Addresses-Coverity-ID: 1598775 ("Out-of-bounds read")

In kernel/compat.c in the Linux kernel before 3.17, as used in Google Chrome OS and other products, there is a possible out-of-bounds read. restart_syscall uses uninitialized data when restarting compat_sys_nanosleep. NOTE: this is disputed because the code path is unreachable

In the Linux kernel, the following vulnerability has been resolved: dma-mapping: benchmark: handle NUMA_NO_NODE correctly cpumask_of_node() can be called for NUMA_NO_NODE inside do_map_benchmark() resulting in the following sanitizer report: UBSAN: array-index-out-of-bounds in ./arch/x86/include/asm/topology.h:72:28 index -1 is out of range for type 'cpumask [64][1]' CPU: 1 PID: 990 Comm: dma_map_benchma Not tainted 6.9.0-rc6 #29 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) Call Trace: <TASK> dump_stack_lvl (lib/dump_stack.c:117) ubsan_epilogue (lib/ubsan.c:232) __ubsan_handle_out_of_bounds (lib/ubsan.c:429) cpumask_of_node (arch/x86/include/asm/topology.h:72) [inline] do_map_benchmark (kernel/dma/map_benchmark.c:104) map_benchmark_ioctl (kernel/dma/map_benchmark.c:246) full_proxy_unlocked_ioctl (fs/debugfs/file.c:333) __x64_sys_ioctl (fs/ioctl.c:890) do_syscall_64 (arch/x86/entry/common.c:83) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) Use cpumask_of_node() in place when binding a kernel thread to a cpuset of a particular node. Note that the provided node id is checked inside map_benchmark_ioctl(). It's just a NUMA_NO_NODE case which is not handled properly later. Found by Linux Verification Center (linuxtesting.org).

In the Linux kernel, the following vulnerability has been resolved: vduse: check that offset is within bounds in get_config() This condition checks "len" but it does not check "offset" and that could result in an out of bounds read if "offset > dev->config_size". The problem is that since both variables are unsigned the "dev->config_size - offset" subtraction would result in a very high unsigned value. I think these checks might not be necessary because "len" and "offset" are supposed to already have been validated using the vhost_vdpa_config_validate() function. But I do not know the code perfectly, and I like to be safe.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: refactor malicious adv data check Check for out-of-bound read was being performed at the end of while num_reports loop, and would fill journal with false positives. Added check to beginning of loop processing so that it doesn't get checked after ptr has been advanced.

In the Linux kernel, the following vulnerability has been resolved: mtd: physmap: physmap-bt1-rom: Fix unintentional stack access Cast &data to (char *) in order to avoid unintentionally accessing the stack. Notice that data is of type u32, so any increment to &data will be in the order of 4-byte chunks, and this piece of code is actually intended to be a byte offset. Addresses-Coverity-ID: 1497765 ("Out-of-bounds access")

In the Linux kernel, the following vulnerability has been resolved: scsi: scsi_debug: Fix out-of-bound read in resp_readcap16() The following warning was observed running syzkaller: [ 3813.830724] sg_write: data in/out 65466/242 bytes for SCSI command 0x9e-- guessing data in; [ 3813.830724] program syz-executor not setting count and/or reply_len properly [ 3813.836956] ================================================================== [ 3813.839465] BUG: KASAN: stack-out-of-bounds in sg_copy_buffer+0x157/0x1e0 [ 3813.841773] Read of size 4096 at addr ffff8883cf80f540 by task syz-executor/1549 [ 3813.846612] Call Trace: [ 3813.846995] dump_stack+0x108/0x15f [ 3813.847524] print_address_description+0xa5/0x372 [ 3813.848243] kasan_report.cold+0x236/0x2a8 [ 3813.849439] check_memory_region+0x240/0x270 [ 3813.850094] memcpy+0x30/0x80 [ 3813.850553] sg_copy_buffer+0x157/0x1e0 [ 3813.853032] sg_copy_from_buffer+0x13/0x20 [ 3813.853660] fill_from_dev_buffer+0x135/0x370 [ 3813.854329] resp_readcap16+0x1ac/0x280 [ 3813.856917] schedule_resp+0x41f/0x1630 [ 3813.858203] scsi_debug_queuecommand+0xb32/0x17e0 [ 3813.862699] scsi_dispatch_cmd+0x330/0x950 [ 3813.863329] scsi_request_fn+0xd8e/0x1710 [ 3813.863946] __blk_run_queue+0x10b/0x230 [ 3813.864544] blk_execute_rq_nowait+0x1d8/0x400 [ 3813.865220] sg_common_write.isra.0+0xe61/0x2420 [ 3813.871637] sg_write+0x6c8/0xef0 [ 3813.878853] __vfs_write+0xe4/0x800 [ 3813.883487] vfs_write+0x17b/0x530 [ 3813.884008] ksys_write+0x103/0x270 [ 3813.886268] __x64_sys_write+0x77/0xc0 [ 3813.886841] do_syscall_64+0x106/0x360 [ 3813.887415] entry_SYSCALL_64_after_hwframe+0x44/0xa9 This issue can be reproduced with the following syzkaller log: r0 = openat(0xffffffffffffff9c, &(0x7f0000000040)='./file0\x00', 0x26e1, 0x0) r1 = syz_open_procfs(0xffffffffffffffff, &(0x7f0000000000)='fd/3\x00') open_by_handle_at(r1, &(0x7f00000003c0)=ANY=[@ANYRESHEX], 0x602000) r2 = syz_open_dev$sg(&(0x7f0000000000), 0x0, 0x40782) write$binfmt_aout(r2, &(0x7f0000000340)=ANY=[@ANYBLOB="00000000deff000000000000000000000000000000000000000000000000000047f007af9e107a41ec395f1bded7be24277a1501ff6196a83366f4e6362bc0ff2b247f68a972989b094b2da4fb3607fcf611a22dd04310d28c75039d"], 0x126) In resp_readcap16() we get "int alloc_len" value -1104926854, and then pass the huge arr_len to fill_from_dev_buffer(), but arr is only 32 bytes. This leads to OOB in sg_copy_buffer(). To solve this issue, define alloc_len as u32.

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix tail_call_reachable rejection for interpreter when jit failed During testing of f263a81451c1 ("bpf: Track subprog poke descriptors correctly and fix use-after-free") under various failure conditions, for example, when jit_subprogs() fails and tries to clean up the program to be run under the interpreter, we ran into the following freeze: [...] #127/8 tailcall_bpf2bpf_3:FAIL [...] [ 92.041251] BUG: KASAN: slab-out-of-bounds in ___bpf_prog_run+0x1b9d/0x2e20 [ 92.042408] Read of size 8 at addr ffff88800da67f68 by task test_progs/682 [ 92.043707] [ 92.044030] CPU: 1 PID: 682 Comm: test_progs Tainted: G O 5.13.0-53301-ge6c08cb33a30-dirty #87 [ 92.045542] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1 04/01/2014 [ 92.046785] Call Trace: [ 92.047171] ? __bpf_prog_run_args64+0xc0/0xc0 [ 92.047773] ? __bpf_prog_run_args32+0x8b/0xb0 [ 92.048389] ? __bpf_prog_run_args64+0xc0/0xc0 [ 92.049019] ? ktime_get+0x117/0x130 [...] // few hundred [similar] lines more [ 92.659025] ? ktime_get+0x117/0x130 [ 92.659845] ? __bpf_prog_run_args64+0xc0/0xc0 [ 92.660738] ? __bpf_prog_run_args32+0x8b/0xb0 [ 92.661528] ? __bpf_prog_run_args64+0xc0/0xc0 [ 92.662378] ? print_usage_bug+0x50/0x50 [ 92.663221] ? print_usage_bug+0x50/0x50 [ 92.664077] ? bpf_ksym_find+0x9c/0xe0 [ 92.664887] ? ktime_get+0x117/0x130 [ 92.665624] ? kernel_text_address+0xf5/0x100 [ 92.666529] ? __kernel_text_address+0xe/0x30 [ 92.667725] ? unwind_get_return_address+0x2f/0x50 [ 92.668854] ? ___bpf_prog_run+0x15d4/0x2e20 [ 92.670185] ? ktime_get+0x117/0x130 [ 92.671130] ? __bpf_prog_run_args64+0xc0/0xc0 [ 92.672020] ? __bpf_prog_run_args32+0x8b/0xb0 [ 92.672860] ? __bpf_prog_run_args64+0xc0/0xc0 [ 92.675159] ? ktime_get+0x117/0x130 [ 92.677074] ? lock_is_held_type+0xd5/0x130 [ 92.678662] ? ___bpf_prog_run+0x15d4/0x2e20 [ 92.680046] ? ktime_get+0x117/0x130 [ 92.681285] ? __bpf_prog_run32+0x6b/0x90 [ 92.682601] ? __bpf_prog_run64+0x90/0x90 [ 92.683636] ? lock_downgrade+0x370/0x370 [ 92.684647] ? mark_held_locks+0x44/0x90 [ 92.685652] ? ktime_get+0x117/0x130 [ 92.686752] ? lockdep_hardirqs_on+0x79/0x100 [ 92.688004] ? ktime_get+0x117/0x130 [ 92.688573] ? __cant_migrate+0x2b/0x80 [ 92.689192] ? bpf_test_run+0x2f4/0x510 [ 92.689869] ? bpf_test_timer_continue+0x1c0/0x1c0 [ 92.690856] ? rcu_read_lock_bh_held+0x90/0x90 [ 92.691506] ? __kasan_slab_alloc+0x61/0x80 [ 92.692128] ? eth_type_trans+0x128/0x240 [ 92.692737] ? __build_skb+0x46/0x50 [ 92.693252] ? bpf_prog_test_run_skb+0x65e/0xc50 [ 92.693954] ? bpf_prog_test_run_raw_tp+0x2d0/0x2d0 [ 92.694639] ? __fget_light+0xa1/0x100 [ 92.695162] ? bpf_prog_inc+0x23/0x30 [ 92.695685] ? __sys_bpf+0xb40/0x2c80 [ 92.696324] ? bpf_link_get_from_fd+0x90/0x90 [ 92.697150] ? mark_held_locks+0x24/0x90 [ 92.698007] ? lockdep_hardirqs_on_prepare+0x124/0x220 [ 92.699045] ? finish_task_switch+0xe6/0x370 [ 92.700072] ? lockdep_hardirqs_on+0x79/0x100 [ 92.701233] ? finish_task_switch+0x11d/0x370 [ 92.702264] ? __switch_to+0x2c0/0x740 [ 92.703148] ? mark_held_locks+0x24/0x90 [ 92.704155] ? __x64_sys_bpf+0x45/0x50 [ 92.705146] ? do_syscall_64+0x35/0x80 [ 92.706953] ? entry_SYSCALL_64_after_hwframe+0x44/0xae [...] Turns out that the program rejection from e411901c0b77 ("bpf: allow for tailcalls in BPF subprograms for x64 JIT") is buggy since env->prog->aux->tail_call_reachable is never true. Commit ebf7d1f508a7 ("bpf, x64: rework pro/epilogue and tailcall handling in JIT") added a tracker into check_max_stack_depth() which propagates the tail_call_reachable condition throughout the subprograms. This info is then assigned to the subprogram's ---truncated---

In the Linux kernel, the following vulnerability has been resolved: sch_cake: Fix out of bounds when parsing TCP options and header The TCP option parser in cake qdisc (cake_get_tcpopt and cake_tcph_may_drop) could read one byte out of bounds. When the length is 1, the execution flow gets into the loop, reads one byte of the opcode, and if the opcode is neither TCPOPT_EOL nor TCPOPT_NOP, it reads one more byte, which exceeds the length of 1. This fix is inspired by commit 9609dad263f8 ("ipv4: tcp_input: fix stack out of bounds when parsing TCP options."). v2 changes: Added doff validation in cake_get_tcphdr to avoid parsing garbage as TCP header. Although it wasn't strictly an out-of-bounds access (memory was allocated), garbage values could be read where CAKE expected the TCP header if doff was smaller than 5.

In the Linux kernel, the following vulnerability has been resolved: netfilter: synproxy: Fix out of bounds when parsing TCP options The TCP option parser in synproxy (synproxy_parse_options) could read one byte out of bounds. When the length is 1, the execution flow gets into the loop, reads one byte of the opcode, and if the opcode is neither TCPOPT_EOL nor TCPOPT_NOP, it reads one more byte, which exceeds the length of 1. This fix is inspired by commit 9609dad263f8 ("ipv4: tcp_input: fix stack out of bounds when parsing TCP options."). v2 changes: Added an early return when length < 0 to avoid calling skb_header_pointer with negative length.

In the Linux kernel, the following vulnerability has been resolved: net: validate lwtstate->data before returning from skb_tunnel_info() skb_tunnel_info() returns pointer of lwtstate->data as ip_tunnel_info type without validation. lwtstate->data can have various types such as mpls_iptunnel_encap, etc and these are not compatible. So skb_tunnel_info() should validate before returning that pointer. Splat looks like: BUG: KASAN: slab-out-of-bounds in vxlan_get_route+0x418/0x4b0 [vxlan] Read of size 2 at addr ffff888106ec2698 by task ping/811 CPU: 1 PID: 811 Comm: ping Not tainted 5.13.0+ #1195 Call Trace: dump_stack_lvl+0x56/0x7b print_address_description.constprop.8.cold.13+0x13/0x2ee ? vxlan_get_route+0x418/0x4b0 [vxlan] ? vxlan_get_route+0x418/0x4b0 [vxlan] kasan_report.cold.14+0x83/0xdf ? vxlan_get_route+0x418/0x4b0 [vxlan] vxlan_get_route+0x418/0x4b0 [vxlan] [ ... ] vxlan_xmit_one+0x148b/0x32b0 [vxlan] [ ... ] vxlan_xmit+0x25c5/0x4780 [vxlan] [ ... ] dev_hard_start_xmit+0x1ae/0x6e0 __dev_queue_xmit+0x1f39/0x31a0 [ ... ] neigh_xmit+0x2f9/0x940 mpls_xmit+0x911/0x1600 [mpls_iptunnel] lwtunnel_xmit+0x18f/0x450 ip_finish_output2+0x867/0x2040 [ ... ]

In the Linux kernel, the following vulnerability has been resolved: tracing: Correct the length check which causes memory corruption We've suffered from severe kernel crashes due to memory corruption on our production environment, like, Call Trace: [1640542.554277] general protection fault: 0000 [#1] SMP PTI [1640542.554856] CPU: 17 PID: 26996 Comm: python Kdump: loaded Tainted:G [1640542.556629] RIP: 0010:kmem_cache_alloc+0x90/0x190 [1640542.559074] RSP: 0018:ffffb16faa597df8 EFLAGS: 00010286 [1640542.559587] RAX: 0000000000000000 RBX: 0000000000400200 RCX: 0000000006e931bf [1640542.560323] RDX: 0000000006e931be RSI: 0000000000400200 RDI: ffff9a45ff004300 [1640542.560996] RBP: 0000000000400200 R08: 0000000000023420 R09: 0000000000000000 [1640542.561670] R10: 0000000000000000 R11: 0000000000000000 R12: ffffffff9a20608d [1640542.562366] R13: ffff9a45ff004300 R14: ffff9a45ff004300 R15: 696c662f65636976 [1640542.563128] FS: 00007f45d7c6f740(0000) GS:ffff9a45ff840000(0000) knlGS:0000000000000000 [1640542.563937] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [1640542.564557] CR2: 00007f45d71311a0 CR3: 000000189d63e004 CR4: 00000000003606e0 [1640542.565279] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [1640542.566069] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [1640542.566742] Call Trace: [1640542.567009] anon_vma_clone+0x5d/0x170 [1640542.567417] __split_vma+0x91/0x1a0 [1640542.567777] do_munmap+0x2c6/0x320 [1640542.568128] vm_munmap+0x54/0x70 [1640542.569990] __x64_sys_munmap+0x22/0x30 [1640542.572005] do_syscall_64+0x5b/0x1b0 [1640542.573724] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [1640542.575642] RIP: 0033:0x7f45d6e61e27 James Wang has reproduced it stably on the latest 4.19 LTS. After some debugging, we finally proved that it's due to ftrace buffer out-of-bound access using a debug tool as follows: [ 86.775200] BUG: Out-of-bounds write at addr 0xffff88aefe8b7000 [ 86.780806] no_context+0xdf/0x3c0 [ 86.784327] __do_page_fault+0x252/0x470 [ 86.788367] do_page_fault+0x32/0x140 [ 86.792145] page_fault+0x1e/0x30 [ 86.795576] strncpy_from_unsafe+0x66/0xb0 [ 86.799789] fetch_memory_string+0x25/0x40 [ 86.804002] fetch_deref_string+0x51/0x60 [ 86.808134] kprobe_trace_func+0x32d/0x3a0 [ 86.812347] kprobe_dispatcher+0x45/0x50 [ 86.816385] kprobe_ftrace_handler+0x90/0xf0 [ 86.820779] ftrace_ops_assist_func+0xa1/0x140 [ 86.825340] 0xffffffffc00750bf [ 86.828603] do_sys_open+0x5/0x1f0 [ 86.832124] do_syscall_64+0x5b/0x1b0 [ 86.835900] entry_SYSCALL_64_after_hwframe+0x44/0xa9 commit b220c049d519 ("tracing: Check length before giving out the filter buffer") adds length check to protect trace data overflow introduced in 0fc1b09ff1ff, seems that this fix can't prevent overflow entirely, the length check should also take the sizeof entry->array[0] into account, since this array[0] is filled the length of trace data and occupy addtional space and risk overflow.

In the Linux kernel, the following vulnerability has been resolved: usb: typec: tipd: Remove WARN_ON in tps6598x_block_read Calling tps6598x_block_read with a higher than allowed len can be handled by just returning an error. There's no need to crash systems with panic-on-warn enabled.

In the Linux kernel, the following vulnerability has been resolved: ataflop: potential out of bounds in do_format() The function uses "type" as an array index: q = unit[drive].disk[type]->queue; Unfortunately the bounds check on "type" isn't done until later in the function. Fix this by moving the bounds check to the start.

In the Linux kernel, the following vulnerability has been resolved: Input: elantech - fix stack out of bound access in elantech_change_report_id() The array param[] in elantech_change_report_id() must be at least 3 bytes, because elantech_read_reg_params() is calling ps2_command() with PSMOUSE_CMD_GETINFO, that is going to access 3 bytes from param[], but it's defined in the stack as an array of 2 bytes, therefore we have a potential stack out-of-bounds access here, also confirmed by KASAN: [ 6.512374] BUG: KASAN: stack-out-of-bounds in __ps2_command+0x372/0x7e0 [ 6.512397] Read of size 1 at addr ffff8881024d77c2 by task kworker/2:1/118 [ 6.512416] CPU: 2 PID: 118 Comm: kworker/2:1 Not tainted 5.13.0-22-generic #22+arighi20211110 [ 6.512428] Hardware name: LENOVO 20T8000QGE/20T8000QGE, BIOS R1AET32W (1.08 ) 08/14/2020 [ 6.512436] Workqueue: events_long serio_handle_event [ 6.512453] Call Trace: [ 6.512462] show_stack+0x52/0x58 [ 6.512474] dump_stack+0xa1/0xd3 [ 6.512487] print_address_description.constprop.0+0x1d/0x140 [ 6.512502] ? __ps2_command+0x372/0x7e0 [ 6.512516] __kasan_report.cold+0x7d/0x112 [ 6.512527] ? _raw_write_lock_irq+0x20/0xd0 [ 6.512539] ? __ps2_command+0x372/0x7e0 [ 6.512552] kasan_report+0x3c/0x50 [ 6.512564] __asan_load1+0x6a/0x70 [ 6.512575] __ps2_command+0x372/0x7e0 [ 6.512589] ? ps2_drain+0x240/0x240 [ 6.512601] ? dev_printk_emit+0xa2/0xd3 [ 6.512612] ? dev_vprintk_emit+0xc5/0xc5 [ 6.512621] ? __kasan_check_write+0x14/0x20 [ 6.512634] ? mutex_lock+0x8f/0xe0 [ 6.512643] ? __mutex_lock_slowpath+0x20/0x20 [ 6.512655] ps2_command+0x52/0x90 [ 6.512670] elantech_ps2_command+0x4f/0xc0 [psmouse] [ 6.512734] elantech_change_report_id+0x1e6/0x256 [psmouse] [ 6.512799] ? elantech_report_trackpoint.constprop.0.cold+0xd/0xd [psmouse] [ 6.512863] ? ps2_command+0x7f/0x90 [ 6.512877] elantech_query_info.cold+0x6bd/0x9ed [psmouse] [ 6.512943] ? elantech_setup_ps2+0x460/0x460 [psmouse] [ 6.513005] ? psmouse_reset+0x69/0xb0 [psmouse] [ 6.513064] ? psmouse_attr_set_helper+0x2a0/0x2a0 [psmouse] [ 6.513122] ? phys_pmd_init+0x30e/0x521 [ 6.513137] elantech_init+0x8a/0x200 [psmouse] [ 6.513200] ? elantech_init_ps2+0xf0/0xf0 [psmouse] [ 6.513249] ? elantech_query_info+0x440/0x440 [psmouse] [ 6.513296] ? synaptics_send_cmd+0x60/0x60 [psmouse] [ 6.513342] ? elantech_query_info+0x440/0x440 [psmouse] [ 6.513388] ? psmouse_try_protocol+0x11e/0x170 [psmouse] [ 6.513432] psmouse_extensions+0x65d/0x6e0 [psmouse] [ 6.513476] ? psmouse_try_protocol+0x170/0x170 [psmouse] [ 6.513519] ? mutex_unlock+0x22/0x40 [ 6.513526] ? ps2_command+0x7f/0x90 [ 6.513536] ? psmouse_probe+0xa3/0xf0 [psmouse] [ 6.513580] psmouse_switch_protocol+0x27d/0x2e0 [psmouse] [ 6.513624] psmouse_connect+0x272/0x530 [psmouse] [ 6.513669] serio_driver_probe+0x55/0x70 [ 6.513679] really_probe+0x190/0x720 [ 6.513689] driver_probe_device+0x160/0x1f0 [ 6.513697] device_driver_attach+0x119/0x130 [ 6.513705] ? device_driver_attach+0x130/0x130 [ 6.513713] __driver_attach+0xe7/0x1a0 [ 6.513720] ? device_driver_attach+0x130/0x130 [ 6.513728] bus_for_each_dev+0xfb/0x150 [ 6.513738] ? subsys_dev_iter_exit+0x10/0x10 [ 6.513748] ? _raw_write_unlock_bh+0x30/0x30 [ 6.513757] driver_attach+0x2d/0x40 [ 6.513764] serio_handle_event+0x199/0x3d0 [ 6.513775] process_one_work+0x471/0x740 [ 6.513785] worker_thread+0x2d2/0x790 [ 6.513794] ? process_one_work+0x740/0x740 [ 6.513802] kthread+0x1b4/0x1e0 [ 6.513809] ? set_kthread_struct+0x80/0x80 [ 6.513816] ret_from_fork+0x22/0x30 [ 6.513832] The buggy address belongs to the page: [ 6.513838] page:00000000bc35e189 refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1024d7 [ 6.513847] flags: 0x17ffffc0000000(node=0|zone=2|lastcpupid=0x1fffff) [ 6.513860] raw: 0 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: net: qrtr: fix OOB Read in qrtr_endpoint_post Syzbot reported slab-out-of-bounds Read in qrtr_endpoint_post. The problem was in wrong _size_ type: if (len != ALIGN(size, 4) + hdrlen) goto err; If size from qrtr_hdr is 4294967293 (0xfffffffd), the result of ALIGN(size, 4) will be 0. In case of len == hdrlen and size == 4294967293 in header this check won't fail and skb_put_data(skb, data + hdrlen, size); will read out of bound from data, which is hdrlen allocated block.

In the Linux kernel, the following vulnerability has been resolved: mptcp: Fix out of bounds when parsing TCP options The TCP option parser in mptcp (mptcp_get_options) could read one byte out of bounds. When the length is 1, the execution flow gets into the loop, reads one byte of the opcode, and if the opcode is neither TCPOPT_EOL nor TCPOPT_NOP, it reads one more byte, which exceeds the length of 1. This fix is inspired by commit 9609dad263f8 ("ipv4: tcp_input: fix stack out of bounds when parsing TCP options.").

In the Linux kernel, the following vulnerability has been resolved: net: stmmac: dwmac-rk: fix oob read in rk_gmac_setup KASAN reports an out-of-bounds read in rk_gmac_setup on the line: while (ops->regs[i]) { This happens for most platforms since the regs flexible array member is empty, so the memory after the ops structure is being read here. It seems that mostly this happens to contain zero anyway, so we get lucky and everything still works. To avoid adding redundant data to nearly all the ops structures, add a new flag to indicate whether the regs field is valid and avoid this loop when it is not.

In the Linux kernel, the following vulnerability has been resolved: ipv6: Fix KASAN: slab-out-of-bounds Read in fib6_nh_flush_exceptions Reported by syzbot: HEAD commit: 90c911ad Merge tag 'fixes' of git://git.kernel.org/pub/scm.. git tree: git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git master dashboard link: https://syzkaller.appspot.com/bug?extid=123aa35098fd3c000eb7 compiler: Debian clang version 11.0.1-2 ================================================================== BUG: KASAN: slab-out-of-bounds in fib6_nh_get_excptn_bucket net/ipv6/route.c:1604 [inline] BUG: KASAN: slab-out-of-bounds in fib6_nh_flush_exceptions+0xbd/0x360 net/ipv6/route.c:1732 Read of size 8 at addr ffff8880145c78f8 by task syz-executor.4/17760 CPU: 0 PID: 17760 Comm: syz-executor.4 Not tainted 5.12.0-rc8-syzkaller #0 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:79 [inline] dump_stack+0x202/0x31e lib/dump_stack.c:120 print_address_description+0x5f/0x3b0 mm/kasan/report.c:232 __kasan_report mm/kasan/report.c:399 [inline] kasan_report+0x15c/0x200 mm/kasan/report.c:416 fib6_nh_get_excptn_bucket net/ipv6/route.c:1604 [inline] fib6_nh_flush_exceptions+0xbd/0x360 net/ipv6/route.c:1732 fib6_nh_release+0x9a/0x430 net/ipv6/route.c:3536 fib6_info_destroy_rcu+0xcb/0x1c0 net/ipv6/ip6_fib.c:174 rcu_do_batch kernel/rcu/tree.c:2559 [inline] rcu_core+0x8f6/0x1450 kernel/rcu/tree.c:2794 __do_softirq+0x372/0x7a6 kernel/softirq.c:345 invoke_softirq kernel/softirq.c:221 [inline] __irq_exit_rcu+0x22c/0x260 kernel/softirq.c:422 irq_exit_rcu+0x5/0x20 kernel/softirq.c:434 sysvec_apic_timer_interrupt+0x91/0xb0 arch/x86/kernel/apic/apic.c:1100 </IRQ> asm_sysvec_apic_timer_interrupt+0x12/0x20 arch/x86/include/asm/idtentry.h:632 RIP: 0010:lock_acquire+0x1f6/0x720 kernel/locking/lockdep.c:5515 Code: f6 84 24 a1 00 00 00 02 0f 85 8d 02 00 00 f7 c3 00 02 00 00 49 bd 00 00 00 00 00 fc ff df 74 01 fb 48 c7 44 24 40 0e 36 e0 45 <4b> c7 44 3d 00 00 00 00 00 4b c7 44 3d 09 00 00 00 00 43 c7 44 3d RSP: 0018:ffffc90009e06560 EFLAGS: 00000206 RAX: 1ffff920013c0cc0 RBX: 0000000000000246 RCX: dffffc0000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffffc90009e066e0 R08: dffffc0000000000 R09: fffffbfff1f992b1 R10: fffffbfff1f992b1 R11: 0000000000000000 R12: 0000000000000000 R13: dffffc0000000000 R14: 0000000000000000 R15: 1ffff920013c0cb4 rcu_lock_acquire+0x2a/0x30 include/linux/rcupdate.h:267 rcu_read_lock include/linux/rcupdate.h:656 [inline] ext4_get_group_info+0xea/0x340 fs/ext4/ext4.h:3231 ext4_mb_prefetch+0x123/0x5d0 fs/ext4/mballoc.c:2212 ext4_mb_regular_allocator+0x8a5/0x28f0 fs/ext4/mballoc.c:2379 ext4_mb_new_blocks+0xc6e/0x24f0 fs/ext4/mballoc.c:4982 ext4_ext_map_blocks+0x2be3/0x7210 fs/ext4/extents.c:4238 ext4_map_blocks+0xab3/0x1cb0 fs/ext4/inode.c:638 ext4_getblk+0x187/0x6c0 fs/ext4/inode.c:848 ext4_bread+0x2a/0x1c0 fs/ext4/inode.c:900 ext4_append+0x1a4/0x360 fs/ext4/namei.c:67 ext4_init_new_dir+0x337/0xa10 fs/ext4/namei.c:2768 ext4_mkdir+0x4b8/0xc00 fs/ext4/namei.c:2814 vfs_mkdir+0x45b/0x640 fs/namei.c:3819 ovl_do_mkdir fs/overlayfs/overlayfs.h:161 [inline] ovl_mkdir_real+0x53/0x1a0 fs/overlayfs/dir.c:146 ovl_create_real+0x280/0x490 fs/overlayfs/dir.c:193 ovl_workdir_create+0x425/0x600 fs/overlayfs/super.c:788 ovl_make_workdir+0xed/0x1140 fs/overlayfs/super.c:1355 ovl_get_workdir fs/overlayfs/super.c:1492 [inline] ovl_fill_super+0x39ee/0x5370 fs/overlayfs/super.c:2035 mount_nodev+0x52/0xe0 fs/super.c:1413 legacy_get_tree+0xea/0x180 fs/fs_context.c:592 vfs_get_tree+0x86/0x270 fs/super.c:1497 do_new_mount fs/namespace.c:2903 [inline] path_mount+0x196f/0x2be0 fs/namespace.c:3233 do_mount fs/namespace.c:3246 [inline] __do_sys_mount fs/namespace.c:3454 [inline] __se_sys_mount+0x2f9/0x3b0 fs/namespace.c:3431 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x4665f9 Code: ff ff c3 66 2e 0f 1f 84 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: pinctrl: mediatek: fix global-out-of-bounds issue When eint virtual eint number is greater than gpio number, it maybe produce 'desc[eint_n]' size globle-out-of-bounds issue.

In the Linux kernel, the following vulnerability has been resolved: NFS: fs_context: validate UDP retrans to prevent shift out-of-bounds Fix shift out-of-bounds in xprt_calc_majortimeo(). This is caused by a garbage timeout (retrans) mount option being passed to nfs mount, in this case from syzkaller. If the protocol is XPRT_TRANSPORT_UDP, then 'retrans' is a shift value for a 64-bit long integer, so 'retrans' cannot be >= 64. If it is >= 64, fail the mount and return an error.

In the Linux kernel, the following vulnerability has been resolved: powerpc/xive/spapr: correct bitmap allocation size kasan detects access beyond the end of the xibm->bitmap allocation: BUG: KASAN: slab-out-of-bounds in _find_first_zero_bit+0x40/0x140 Read of size 8 at addr c00000001d1d0118 by task swapper/0/1 CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.19.0-rc2-00001-g90df023b36dd #28 Call Trace: [c00000001d98f770] [c0000000012baab8] dump_stack_lvl+0xac/0x108 (unreliable) [c00000001d98f7b0] [c00000000068faac] print_report+0x37c/0x710 [c00000001d98f880] [c0000000006902c0] kasan_report+0x110/0x354 [c00000001d98f950] [c000000000692324] __asan_load8+0xa4/0xe0 [c00000001d98f970] [c0000000011c6ed0] _find_first_zero_bit+0x40/0x140 [c00000001d98f9b0] [c0000000000dbfbc] xive_spapr_get_ipi+0xcc/0x260 [c00000001d98fa70] [c0000000000d6d28] xive_setup_cpu_ipi+0x1e8/0x450 [c00000001d98fb30] [c000000004032a20] pSeries_smp_probe+0x5c/0x118 [c00000001d98fb60] [c000000004018b44] smp_prepare_cpus+0x944/0x9ac [c00000001d98fc90] [c000000004009f9c] kernel_init_freeable+0x2d4/0x640 [c00000001d98fd90] [c0000000000131e8] kernel_init+0x28/0x1d0 [c00000001d98fe10] [c00000000000cd54] ret_from_kernel_thread+0x5c/0x64 Allocated by task 0: kasan_save_stack+0x34/0x70 __kasan_kmalloc+0xb4/0xf0 __kmalloc+0x268/0x540 xive_spapr_init+0x4d0/0x77c pseries_init_irq+0x40/0x27c init_IRQ+0x44/0x84 start_kernel+0x2a4/0x538 start_here_common+0x1c/0x20 The buggy address belongs to the object at c00000001d1d0118 which belongs to the cache kmalloc-8 of size 8 The buggy address is located 0 bytes inside of 8-byte region [c00000001d1d0118, c00000001d1d0120) The buggy address belongs to the physical page: page:c00c000000074740 refcount:1 mapcount:0 mapping:0000000000000000 index:0xc00000001d1d0558 pfn:0x1d1d flags: 0x7ffff000000200(slab|node=0|zone=0|lastcpupid=0x7ffff) raw: 007ffff000000200 c00000001d0003c8 c00000001d0003c8 c00000001d010480 raw: c00000001d1d0558 0000000001e1000a 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: c00000001d1d0000: fc 00 fc fc fc fc fc fc fc fc fc fc fc fc fc fc c00000001d1d0080: fc fc 00 fc fc fc fc fc fc fc fc fc fc fc fc fc >c00000001d1d0100: fc fc fc 02 fc fc fc fc fc fc fc fc fc fc fc fc ^ c00000001d1d0180: fc fc fc fc 04 fc fc fc fc fc fc fc fc fc fc fc c00000001d1d0200: fc fc fc fc fc 04 fc fc fc fc fc fc fc fc fc fc This happens because the allocation uses the wrong unit (bits) when it should pass (BITS_TO_LONGS(count) * sizeof(long)) or equivalent. With small numbers of bits, the allocated object can be smaller than sizeof(long), which results in invalid accesses. Use bitmap_zalloc() to allocate and initialize the irq bitmap, paired with bitmap_free() for consistency.

In the Linux kernel, the following vulnerability has been resolved: s390/cio: Ensure the copied buf is NUL terminated Currently, we allocate a lbuf-sized kernel buffer and copy lbuf from userspace to that buffer. Later, we use scanf on this buffer but we don't ensure that the string is terminated inside the buffer, this can lead to OOB read when using scanf. Fix this issue by using memdup_user_nul instead.

In the Linux kernel, the following vulnerability has been resolved: drm/vmwgfx: Fix invalid reads in fence signaled events Correctly set the length of the drm_event to the size of the structure that's actually used. The length of the drm_event was set to the parent structure instead of to the drm_vmw_event_fence which is supposed to be read. drm_read uses the length parameter to copy the event to the user space thus resuling in oob reads.

In the Linux kernel, the following vulnerability has been resolved: objtool, nvmet: Fix out-of-bounds stack access in nvmet_ctrl_state_show() The csts_state_names[] array only has six sparse entries, but the iteration code in nvmet_ctrl_state_show() iterates seven, resulting in a potential out-of-bounds stack read. Fix that. Fixes the following warning with an UBSAN kernel: vmlinux.o: warning: objtool: .text.nvmet_ctrl_state_show: unexpected end of section

In the Linux kernel, the following vulnerability has been resolved: USB: core: Fix race by not overwriting udev->descriptor in hub_port_init() Syzbot reported an out-of-bounds read in sysfs.c:read_descriptors(): BUG: KASAN: slab-out-of-bounds in read_descriptors+0x263/0x280 drivers/usb/core/sysfs.c:883 Read of size 8 at addr ffff88801e78b8c8 by task udevd/5011 CPU: 0 PID: 5011 Comm: udevd Not tainted 6.4.0-rc6-syzkaller-00195-g40f71e7cd3c6 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/27/2023 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xd9/0x150 lib/dump_stack.c:106 print_address_description.constprop.0+0x2c/0x3c0 mm/kasan/report.c:351 print_report mm/kasan/report.c:462 [inline] kasan_report+0x11c/0x130 mm/kasan/report.c:572 read_descriptors+0x263/0x280 drivers/usb/core/sysfs.c:883 ... Allocated by task 758: ... __do_kmalloc_node mm/slab_common.c:966 [inline] __kmalloc+0x5e/0x190 mm/slab_common.c:979 kmalloc include/linux/slab.h:563 [inline] kzalloc include/linux/slab.h:680 [inline] usb_get_configuration+0x1f7/0x5170 drivers/usb/core/config.c:887 usb_enumerate_device drivers/usb/core/hub.c:2407 [inline] usb_new_device+0x12b0/0x19d0 drivers/usb/core/hub.c:2545 As analyzed by Khazhy Kumykov, the cause of this bug is a race between read_descriptors() and hub_port_init(): The first routine uses a field in udev->descriptor, not expecting it to change, while the second overwrites it. Prior to commit 45bf39f8df7f ("USB: core: Don't hold device lock while reading the "descriptors" sysfs file") this race couldn't occur, because the routines were mutually exclusive thanks to the device locking. Removing that locking from read_descriptors() exposed it to the race. The best way to fix the bug is to keep hub_port_init() from changing udev->descriptor once udev has been initialized and registered. Drivers expect the descriptors stored in the kernel to be immutable; we should not undermine this expectation. In fact, this change should have been made long ago. So now hub_port_init() will take an additional argument, specifying a buffer in which to store the device descriptor it reads. (If udev has not yet been initialized, the buffer pointer will be NULL and then hub_port_init() will store the device descriptor in udev as before.) This eliminates the data race responsible for the out-of-bounds read. The changes to hub_port_init() appear more extensive than they really are, because of indentation changes resulting from an attempt to avoid writing to other parts of the usb_device structure after it has been initialized. Similar changes should be made to the code that reads the BOS descriptor, but that can be handled in a separate patch later on. This patch is sufficient to fix the bug found by syzbot.

In the Linux kernel, the following vulnerability has been resolved: nfc: nci: assert requested protocol is valid The protocol is used in a bit mask to determine if the protocol is supported. Assert the provided protocol is less than the maximum defined so it doesn't potentially perform a shift-out-of-bounds and provide a clearer error for undefined protocols vs unsupported ones.

In the Linux kernel, the following vulnerability has been resolved: tunnels: fix out of bounds access when building IPv6 PMTU error If the ICMPv6 error is built from a non-linear skb we get the following splat, BUG: KASAN: slab-out-of-bounds in do_csum+0x220/0x240 Read of size 4 at addr ffff88811d402c80 by task netperf/820 CPU: 0 PID: 820 Comm: netperf Not tainted 6.8.0-rc1+ #543 ... kasan_report+0xd8/0x110 do_csum+0x220/0x240 csum_partial+0xc/0x20 skb_tunnel_check_pmtu+0xeb9/0x3280 vxlan_xmit_one+0x14c2/0x4080 vxlan_xmit+0xf61/0x5c00 dev_hard_start_xmit+0xfb/0x510 __dev_queue_xmit+0x7cd/0x32a0 br_dev_queue_push_xmit+0x39d/0x6a0 Use skb_checksum instead of csum_partial who cannot deal with non-linear SKBs.

In the Linux kernel, the following vulnerability has been resolved: iio: magnetometer: rm3100: add boundary check for the value read from RM3100_REG_TMRC Recently, we encounter kernel crash in function rm3100_common_probe caused by out of bound access of array rm3100_samp_rates (because of underlying hardware failures). Add boundary check to prevent out of bound access.

In the Linux kernel, the following vulnerability has been resolved: ksmbd: validate zero num_subauth before sub_auth is accessed Access psid->sub_auth[psid->num_subauth - 1] without checking if num_subauth is non-zero leads to an out-of-bounds read. This patch adds a validation step to ensure num_subauth != 0 before sub_auth is accessed.

In the Linux kernel, the following vulnerability has been resolved: net: qualcomm: rmnet: fix global oob in rmnet_policy The variable rmnet_link_ops assign a *bigger* maxtype which leads to a global out-of-bounds read when parsing the netlink attributes. See bug trace below: ================================================================== BUG: KASAN: global-out-of-bounds in validate_nla lib/nlattr.c:386 [inline] BUG: KASAN: global-out-of-bounds in __nla_validate_parse+0x24af/0x2750 lib/nlattr.c:600 Read of size 1 at addr ffffffff92c438d0 by task syz-executor.6/84207 CPU: 0 PID: 84207 Comm: syz-executor.6 Tainted: G N 6.1.0 #3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x8b/0xb3 lib/dump_stack.c:106 print_address_description mm/kasan/report.c:284 [inline] print_report+0x172/0x475 mm/kasan/report.c:395 kasan_report+0xbb/0x1c0 mm/kasan/report.c:495 validate_nla lib/nlattr.c:386 [inline] __nla_validate_parse+0x24af/0x2750 lib/nlattr.c:600 __nla_parse+0x3e/0x50 lib/nlattr.c:697 nla_parse_nested_deprecated include/net/netlink.h:1248 [inline] __rtnl_newlink+0x50a/0x1880 net/core/rtnetlink.c:3485 rtnl_newlink+0x64/0xa0 net/core/rtnetlink.c:3594 rtnetlink_rcv_msg+0x43c/0xd70 net/core/rtnetlink.c:6091 netlink_rcv_skb+0x14f/0x410 net/netlink/af_netlink.c:2540 netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline] netlink_unicast+0x54e/0x800 net/netlink/af_netlink.c:1345 netlink_sendmsg+0x930/0xe50 net/netlink/af_netlink.c:1921 sock_sendmsg_nosec net/socket.c:714 [inline] sock_sendmsg+0x154/0x190 net/socket.c:734 ____sys_sendmsg+0x6df/0x840 net/socket.c:2482 ___sys_sendmsg+0x110/0x1b0 net/socket.c:2536 __sys_sendmsg+0xf3/0x1c0 net/socket.c:2565 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3b/0x90 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7fdcf2072359 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 f1 19 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fdcf13e3168 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007fdcf219ff80 RCX: 00007fdcf2072359 RDX: 0000000000000000 RSI: 0000000020000200 RDI: 0000000000000003 RBP: 00007fdcf20bd493 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007fffbb8d7bdf R14: 00007fdcf13e3300 R15: 0000000000022000 </TASK> The buggy address belongs to the variable: rmnet_policy+0x30/0xe0 The buggy address belongs to the physical page: page:0000000065bdeb3c refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x155243 flags: 0x200000000001000(reserved|node=0|zone=2) raw: 0200000000001000 ffffea00055490c8 ffffea00055490c8 0000000000000000 raw: 0000000000000000 0000000000000000 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffffffff92c43780: f9 f9 f9 f9 00 00 00 02 f9 f9 f9 f9 00 00 00 07 ffffffff92c43800: f9 f9 f9 f9 00 00 00 05 f9 f9 f9 f9 06 f9 f9 f9 >ffffffff92c43880: f9 f9 f9 f9 00 00 00 00 00 00 f9 f9 f9 f9 f9 f9 ^ ffffffff92c43900: 00 00 00 00 00 00 00 00 07 f9 f9 f9 f9 f9 f9 f9 ffffffff92c43980: 00 00 00 07 f9 f9 f9 f9 00 00 00 05 f9 f9 f9 f9 According to the comment of `nla_parse_nested_deprecated`, the maxtype should be len(destination array) - 1. Hence use `IFLA_RMNET_MAX` here.