In ONAP CLI through Dublin, by accessing an applicable port (30234, 30290, 32010, 30270, 30224, 30281, 30254, 30285, and/or 30271), an attacker gains full access to the respective ONAP services without any authentication. All ONAP Operations Manager (OOM) setups are affected.

Trend Micro Apex One (2019), OfficeScan XG and Worry-Free Business Security (9.0, 9.5, 10.0) server contains a vulnerable service DLL file that could allow a remote attacker to execute arbitrary code on affected installations with SYSTEM level privileges. Authentication is not required to exploit this vulnerability.

D-Link DIR-822+ V1.0.2 contains a login bypass in the HNAP1 interface, which allows attackers to log in to administrator accounts with empty passwords.

The MQTT broker embedded in Yarbo firmware v2.3.9 is configured to allow anonymous connections with no topic-level read or write ACLs. Any host on the same network can subscribe to sensitive telemetry topics or publish control messages directly to the robot without authentication or authorization of any kind.

An issue was discovered in OpServices OpMon 9.3.2 that allows Remote Code Execution .

An issue was discovered on Libre Wireless LS9 LS1.5/p7040 devices. There is Unauthenticated Root ADB Access Over TCP. The LS9 web interface provides functionality to access ADB over TCP. This is not enabled by default, but can be enabled by sending a crafted request to a web management interface endpoint. Requests made to this endpoint do not require authentication. As such, any unauthenticated user who is able to access the web interface will be able to gain root privileges on the LS9 module.

A CWE-306: Missing Authentication for Critical Function vulnerability exists in Easergy T300 (with firmware 2.7 and older) that could cause a wide range of problems, including information exposure, denial of service, and command execution when access to a resource from an attacker is not restricted or incorrectly restricted.

A remote unauthenticated arbitrary code execution vulnerability was discovered in Aruba Airwave Software version(s): Prior to 1.3.2.

The ClearPass Policy Manager web interface is affected by a vulnerability that leads to authentication bypass. Upon successful bypass an attacker could then execute an exploit that would allow to remote command execution in the underlying operating system. Resolution: Fixed in 6.7.13-HF, 6.8.5-HF, 6.8.6, 6.9.1 and higher.

A CWE-306: Missing Authentication for Critical Function vulnerability exists in the Web Server on Modicon M340, Legacy Offers Modicon Quantum and Modicon Premium and associated Communication Modules (see security notification for affected versions), that could cause unauthenticated command execution in the controller when sending special HTTP requests.

The InWave Jobs plugin for WordPress is vulnerable to privilege escalation via password reset in all versions up to, and including, 3.5.1. This is due to the plugin not properly validating a user's identity prior to updating their password. This makes it possible for unauthenticated attackers to change arbitrary user's passwords, including administrators, and leverage that to gain access to their account.

A ZTE product is impacted by the improper access control vulnerability. Due to lack of an authentication protection mechanism in the program, attackers could use this vulnerability to gain access right through brute-force attacks. This affects: <ZXONE 19700 SNPE><ZXONE8700V1.40R2B13_SNPE>

Improper Authentication vulnerability in Abdul Hakeem Build App Online allows Privilege Escalation.This issue affects Build App Online: from n/a through 1.0.19.

Dell EMC Isilon OneFS versions prior to 8.2.0 contain an unauthorized access vulnerability due to a lack of thorough authorization checks when SyncIQ is licensed, but encrypted syncs are not marked as required. When this happens, loss of control of the cluster can occur.

An authentication bypass vulnerability on Genexis Platinum-4410 v2.1 P4410-V2 1.28 devices allows attackers to obtain cleartext credentials from the HTML source code of the cgi-bin/index2.asp URI.

Standalone clients connecting to SAP NetWeaver AS Java via P4 Protocol, versions (SAP-JEECOR 7.00, 7.01; SERVERCOR 7.10, 7.11, 7.20, 7.30, 7.31, 7.40, 7.50; CORE-TOOLS 7.00, 7.01, 7.02, 7.05, 7.10, 7.11, 7.20, 7.30, 7.31, 7.40, 7.50) do not perform any authentication checks for operations that require user identity leading to Authentication Bypass.

The router console is accessible without authentication at "data" field, and while a user needs to be logged in in order to modify the configuration, the session state is shared. If any other user is currently logged in, the anonymous user can execute commands in the context of the authenticated one. If the logged in user has administrative privileges, it is possible to use webadmin service configuration commands to create a new admin user with a chosen password.

SAP Solution Manager (Diagnostics Agent), version 720, allows unencrypted connections from unauthenticated sources. This allows an attacker to control all remote functions on the Agent due to Missing Authentication Check.

NETGEAR ProSAFE Network Management System has Java Debug Wire Protocol (JDWP) listening on port 11611 and it is remotely accessible by unauthenticated users, allowing attackers to execute arbitrary code.

SAP Solution Manager (User Experience Monitoring), version- 7.2, due to Missing Authentication Check does not perform any authentication for a service resulting in complete compromise of all SMDAgents connected to the Solution Manager.

SAP Business Objects Business Intelligence Platform (Live Data Connect), versions 1.0, 2.0, 2.1, 2.2, 2.3, allows an attacker to logon on the Central Management Console without password in case of the BIPRWS application server was not protected with some specific certificate, leading to Missing Authentication Check.

Missing authentication for critical function vulnerability in First Corporation's DVRs allows a remote unauthenticated attacker to rewrite or obtain the configuration information of the affected device. Note that updates are provided only for Late model of CFR-4EABC, CFR-4EAB, CFR-8EAB, CFR-16EAB, MD-404AB, and MD-808AB. As for the other products, apply the workaround.

authentik is an open-source Identity Provider. Prior to versions 2023.8.4 and 2023.10.2, when the default admin user has been deleted, it is potentially possible for an attacker to set the password of the default admin user without any authentication. authentik uses a blueprint to create the default admin user, which can also optionally set the default admin users' password from an environment variable. When the user is deleted, the `initial-setup` flow used to configure authentik after the first installation becomes available again. authentik 2023.8.4 and 2023.10.2 fix this issue. As a workaround, ensure the default admin user (Username `akadmin`) exists and has a password set. It is recommended to use a very strong password for this user, and store it in a secure location like a password manager. It is also possible to deactivate the user to prevent any logins as akadmin.

An issue was discovered on D-Link DAP-1360 revision F devices. Remote attackers can start a telnet service without authorization via an undocumented HTTP request. Although this is the primary vulnerability, the impact depends on the firmware version. Versions 609EU through 613EUbeta were tested. Versions through 6.12b01 have weak root credentials, allowing an attacker to gain remote root access. After 6.12b01, the root credentials were changed but the telnet service can still be started without authorization.

Undisclosed requests may bypass configuration utility authentication, allowing an attacker with network access to the BIG-IP system through the management port and/or self IP addresses to execute arbitrary system commands.  Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated

Systematic IRIS WebForms 5.4 and its functionalities can be accessed and used without any form of authentication.

Authentication Bypass Using an Alternate Path or Channel vulnerability in Yepas Digital Yepas allows Authentication Bypass.This issue affects Digital Yepas: before 1.0.1.

Orthanc server prior to version 1.5.8 does not enable basic authentication by default when remote access is enabled. This could result in unauthorized access by an attacker.

Under certain conditions, vmdir that ships with VMware vCenter Server, as part of an embedded or external Platform Services Controller (PSC), does not correctly implement access controls.

Sing-box is an open source proxy system. Affected versions are subject to an authentication bypass when specially crafted requests are sent to sing-box. This affects all SOCKS5 inbounds with user authentication and an attacker may be able to bypass authentication. Users are advised to update to sing-box 1.4.4 or to 1.5.0-rc.4. Users unable to update should not expose the SOCKS5 inbound to insecure environments.

Vulnerability of access permissions not being strictly verified in the APPWidget module.Successful exploitation of this vulnerability may cause some apps to run without being authorized.

Orca HCM from LEARNING DIGITAL has an Missing Authentication vulnerability, allowing unauthenticated remote attacker to exploit this functionality to create an account with administrator privilege and subsequently use it to log in.

Selea CarPlateServer 4.0.1.6 contains a remote program execution vulnerability that allows attackers to execute arbitrary Windows binaries by manipulating the NO_LIST_EXE_PATH configuration parameter. Attackers can bypass authentication through the /cps/ endpoint and modify server configuration, including changing admin passwords and executing system commands.

Eibiz i-Media Server Digital Signage 3.8.0 contains an unauthenticated privilege escalation vulnerability in the updateUser object that allows attackers to modify user roles. Attackers can exploit the /messagebroker/amf endpoint to elevate privileges and take over user accounts by manipulating role settings without authentication.

Eibiz i-Media Server Digital Signage 3.8.0 contains an authentication bypass vulnerability that allows unauthenticated attackers to create admin users through AMF-encoded object manipulation. Attackers can send crafted serialized objects to the /messagebroker/amf endpoint to create administrative users without authentication, bypassing security controls.

In JetBrains TeamCity before 2023.05.4 authentication bypass leading to RCE on TeamCity Server was possible

Red Lion SixTRAK and VersaTRAK Series RTUs with authenticated users enabled (UDR-A) any Sixnet UDR message will meet an authentication challenge over UDP/IP. When the same message is received over TCP/IP the RTU will simply accept the message with no authentication challenge.

Authentication bypass when an OAuth2 Client is using client_secret_jwt as its authentication method on affected 11.3 versions via specially crafted requests.

The Wordable plugin for WordPress is vulnerable to authentication bypass in versions up to, and including, 3.1.1. This is due to the use of a user supplied hashing algorithm passed to the hash_hmac() function and the use of a loose comparison on the hash which allows an attacker to trick the function into thinking it has a valid hash. This makes it possible for unauthenticated attackers to gain administrator privileges.

The MStore API plugin for WordPress is vulnerable to authentication bypass in versions up to, and including, 2.1.5. This is due to unrestricted access to the 'register' and 'update_user_profile' routes. This makes it possible for unauthenticated attackers to create new administrator accounts, delete existing administrator accounts, or escalate privileges on any account.

Chunghwa Telecom NOKIA G-040W-Q has a vulnerability of authentication bypass, which allows an unauthenticated remote attacker to bypass the authentication mechanism to log in to the device by an alternative URL. This makes it possible for unauthenticated remote attackers to log in as any existing users, such as an administrator, to perform arbitrary system operations or disrupt service.

The official telegraf docker images before 1.9.4-alpine (Alpine specific) contain a blank password for a root user. System using the telegraf docker container deployed by affected versions of the docker image may allow a remote attacker to achieve root access with a blank password.

Version 1.3.0 of the Weave Cloud Agent Docker image contains a blank password for the root user. Systems deployed using affected versions of the Weave Cloud Agent container may allow a remote attacker to achieve root access with a blank password.

The official vault docker images before 0.11.6 contain a blank password for a root user. System using the vault docker container deployed by affected versions of the docker image may allow a remote attacker to achieve root access with a blank password.

A first-factor authentication bypass vulnerability exists in the PingFederate with PingID Radius PCV when a MSCHAP authentication request is sent via a maliciously crafted RADIUS client request.

The official rabbitmq docker images before 3.7.13-beta.1-management-alpine (Alpine specific) contain a blank password for a root user. System using the rabbitmq docker container deployed by affected versions of the docker image may allow a remote attacker to achieve root access with a blank password.

The Appbase streams Docker image 2.1.2 contains a blank password for the root user. Systems deployed using affected versions of the streams container may allow a remote attacker to achieve root access with a blank password.

Version 3.16.0 of the CoScale agent Docker image contains a blank password for the root user. Systems deployed using affected versions of the CoScale agent container may allow a remote attacker to achieve root access with a blank password.

The official memcached docker images before 1.5.11-alpine (Alpine specific) contain a blank password for a root user. System using the memcached docker container deployed by affected versions of the docker image may allow a remote attacker to achieve root access with a blank password.

A vulnerability in the Device Manager application of Cisco Data Center Network Manager (DCNM) could allow an unauthenticated, remote attacker to bypass authentication and execute arbitrary actions on an affected device. The vulnerability is due to a failure in the software to perform proper authentication. An attacker could exploit this vulnerability by browsing to one of the hosted URLs in Cisco DCNM. A successful exploit could allow the attacker to interact with and use certain functions within the Cisco DCNM.