Cisco Adaptive Security Appliances (ASA) 5500 series devices with software 7.0 before 7.0(8.11), 7.1 and 7.2 before 7.2(5.1), 8.0 before 8.0(5.19), 8.1 before 8.1(2.47), 8.2 before 8.2(2.19), and 8.3 before 8.3(1.8); Cisco PIX Security Appliances 500 series devices; and Cisco Firewall Services Module (aka FWSM) 3.1 before 3.1(20), 3.2 before 3.2(20), 4.0 before 4.0(15), and 4.1 before 4.1(5) allow remote attackers to cause a denial of service (device reload) via a malformed Skinny Client Control Protocol (SCCP) message, aka Bug IDs CSCtg69457 and CSCtl84952.

Unspecified vulnerability in Cisco ACE Application Control Engine Module for Catalyst 6500 Switches and 7600 Routers before A2(1.3) and Cisco ACE 4710 Application Control Engine Appliance before A3(2.1) allows remote attackers to cause a denial of service (device reload) via a crafted SSH packet.

A vulnerability in ICMPv6 inspection when configured with the Snort 2 detection engine for Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause the CPU of an affected device to spike to 100 percent, which could stop all traffic processing and result in a denial of service (DoS) condition. FTD management traffic is not affected by this vulnerability. This vulnerability is due to improper error checking when parsing fields within the ICMPv6 header. An attacker could exploit this vulnerability by sending a crafted ICMPv6 packet through an affected device. A successful exploit could allow the attacker to cause the device to exhaust CPU resources and stop processing traffic, resulting in a DoS condition. Note: To recover from the DoS condition, the Snort 2 Detection Engine or the Cisco FTD device may need to be restarted.

A vulnerability in the implementation of the IPv4 Virtual Fragmentation Reassembly (VFR) feature of Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to improper reassembly of large packets that occurs when VFR is enabled on either a tunnel interface or on a physical interface that is configured with a maximum transmission unit (MTU) greater than 4,615 bytes. An attacker could exploit this vulnerability by sending fragmented packets through a VFR-enabled interface on an affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition.

A vulnerability in the bidirectional forwarding detection (BFD) hardware offload feature of Cisco IOS XR Software for Cisco ASR 9000 Series Aggregation Services Routers, ASR 9902 Compact High-Performance Routers, and ASR 9903 Compact High-Performance Routers could allow an unauthenticated, remote attacker to cause a line card to reset, resulting in a denial of service (DoS) condition. This vulnerability is due to the incorrect handling of malformed BFD packets that are received on line cards where the BFD hardware offload feature is enabled. An attacker could exploit this vulnerability by sending a crafted IPv4 BFD packet to an affected device. A successful exploit could allow the attacker to cause line card exceptions or a hard reset, resulting in loss of traffic over that line card while the line card reloads.

SIPD in Cisco Unified Presence 6.x before 6.0(7) and 7.x before 7.0(8) allows remote attackers to cause a denial of service (stack memory corruption and process failure) via a malformed SIP message, aka Bug ID CSCtd14474.

A vulnerability in the IP packet processing of Cisco Access Point (AP) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to insufficient input validation of certain IPv4 packets. An attacker could exploit this vulnerability by sending a crafted IPv4 packet either to or through an affected device. A successful exploit could allow the attacker to cause an affected device to reload unexpectedly, resulting in a DoS condition. To successfully exploit this vulnerability, the attacker does not need to be associated with the affected AP. This vulnerability cannot be exploited by sending IPv6 packets.

A vulnerability in the TCP/IP traffic handling function of the Snort Detection Engine of Cisco Firepower Threat Defense (FTD) Software and Cisco FirePOWER Services could allow an unauthenticated, remote attacker to cause legitimate network traffic to be dropped, resulting in a denial of service (DoS) condition. This vulnerability is due to the improper handling of TCP/IP network traffic. An attacker could exploit this vulnerability by sending a large amount of TCP/IP network traffic through the affected device. A successful exploit could allow the attacker to cause the Cisco FTD device to drop network traffic, resulting in a DoS condition. The affected device must be rebooted to resolve the DoS condition.

A vulnerability in the TLS cryptography functionality of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause the device to reload unexpectedly, resulting in a denial of service (DoS) condition. This vulnerability is due to improper data validation during the TLS 1.3 handshake. An attacker could exploit this vulnerability by sending a crafted TLS 1.3 packet to an affected system through a TLS 1.3-enabled listening socket. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition. Note: This vulnerability can also impact the integrity of a device by causing VPN HostScan communication failures or file transfer failures when Cisco ASA Software is upgraded using Cisco Adaptive Security Device Manager (ASDM).

A vulnerability in the Remote Access VPN feature of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause the device to reload unexpectedly, resulting in a denial of service (DoS) condition on an affected device. This vulnerability is due to improper validation of client key data after the TLS session is established. An attacker could exploit this vulnerability by sending a crafted key value to an affected system over the secure TLS session. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition.

Unspecified vulnerability on Cisco Adaptive Security Appliances (ASA) 5500 Series devices 7.0 before 7.0(8)6, 7.1 before 7.1(2)82, 7.2 before 7.2(4)26, 8.0 before 8.0(4)24, and 8.1 before 8.1(2)14, when H.323 inspection is enabled, allows remote attackers to cause a denial of service (device reload) via a crafted H.323 packet.

A vulnerability in the Resource Reservation Protocol (RSVP) feature of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause an affected device to reload unexpectedly, resulting in a denial of service (DoS) condition. This vulnerability is due to a buffer overflow when processing crafted RSVP packets. An attacker could exploit this vulnerability by sending RSVP traffic to an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition.

A vulnerability in the SIP call processing function of Cisco Unified Communications Manager (Unified CM) and Cisco Unified Communications Manager Session Management Edition (Unified CM SME) could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to improper parsing of SIP messages. An attacker could exploit this vulnerability by sending a crafted SIP message to an affected Cisco Unified CM or Cisco Unified CM SME device. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition that interrupts the communications of reliant voice and video devices.

Multiple vulnerabilities in the Cisco AnyConnect VPN server of Cisco Meraki MX and Cisco Meraki Z Series Teleworker Gateway devices could allow an unauthenticated, remote attacker to cause a DoS condition in the AnyConnect service on an affected device. These vulnerabilities are due to insufficient validation of client-supplied parameters while establishing an SSL VPN session. An attacker could exploit these vulnerabilities by sending a crafted HTTPS request to the VPN server of an affected device. A successful exploit could allow the attacker to cause the Cisco AnyConnect VPN server to restart, resulting in the failure of the established SSL VPN connections and forcing remote users to initiate a new VPN connection and reauthenticate. A sustained attack could prevent new SSL VPN connections from being established. Note: When the attack traffic stops, the Cisco AnyConnect VPN server recovers gracefully without requiring manual intervention.

A vulnerability in the SSL VPN feature for Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause an affected device to reload unexpectedly, resulting in a denial of service (DoS) condition. This vulnerability is due to a logic error in memory management when the device is handling SSL VPN connections. An attacker could exploit this vulnerability by sending crafted SSL/TLS packets to the SSL VPN server of the affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition.

Cisco IOS 12.1 through 12.4, and 15.0M before 15.0(1)M1, allows remote attackers to cause a denial of service (interface queue wedge) via malformed H.323 packets, aka Bug ID CSCta19962.

A vulnerability in the process that classifies traffic that is going to the Unified Threat Defense (UTD) component of Cisco IOS XE Software in controller mode could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability exists because UTD improperly handles certain packets as those packets egress an SD-WAN IPsec tunnel. An attacker could exploit this vulnerability by sending crafted traffic through an SD-WAN IPsec tunnel that is configured on an affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition. Note: SD-WAN tunnels that are configured with Generic Routing Encapsulation (GRE) are not affected by this vulnerability.

A vulnerability in the VPN and management web servers of the Cisco Adaptive Security Virtual Appliance (ASAv) and Cisco Secure Firewall Threat Defense Virtual (FTDv), formerly Cisco Firepower Threat Defense Virtual, platforms could allow an unauthenticated, remote attacker to cause the virtual devices to run out of system memory, which could cause SSL VPN connection processing to slow down and eventually cease all together. This vulnerability is due to a lack of proper memory management for new incoming SSL/TLS connections on the virtual platforms. An attacker could exploit this vulnerability by sending a large number of new incoming SSL/TLS connections to the targeted virtual platform. A successful exploit could allow the attacker to deplete system memory, resulting in a denial of service (DoS) condition. The memory could be reclaimed slowly if the attack traffic is stopped, but a manual reload may be required to restore operations quickly.

A vulnerability in the Locator ID Separation Protocol (LISP) feature of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause an affected device to reload. This vulnerability is due to the incorrect handling of LISP packets. An attacker could exploit this vulnerability by sending a crafted LISP packet to an affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a denial of service (DoS) condition. Note: This vulnerability could be exploited over either IPv4 or IPv6 transport.

A vulnerability in the IKEv1 fragmentation code of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause a heap underflow, resulting in an affected device reloading. This vulnerability exists because crafted, fragmented IKEv1 packets are not properly reassembled. An attacker could exploit this vulnerability by sending crafted UDP packets to an affected system. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a denial of service (DoS) condition. Note: Only traffic that is directed to the affected system can be used to exploit this vulnerability. This vulnerability can be triggered by IPv4 and IPv6 traffic..

A vulnerability in the DHCP snooping feature of Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause an affected device to reload unexpectedly, resulting in a denial of service (DoS) condition. This vulnerability is due to a crafted IPv4 DHCP request packet being mishandled when endpoint analytics are enabled. An attacker could exploit this vulnerability by sending a crafted DHCP request through an affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition. Note: The attack vector is listed as network because a DHCP relay anywhere on the network could allow exploits from networks other than the adjacent one.

Multiple vulnerabilities in the Cisco AnyConnect VPN server of Cisco Meraki MX and Cisco Meraki Z Series Teleworker Gateway devices could allow an unauthenticated, remote attacker to cause a DoS condition in the AnyConnect service on an affected device. These vulnerabilities are due to insufficient validation of client-supplied parameters while establishing an SSL VPN session. An attacker could exploit these vulnerabilities by sending a crafted HTTPS request to the VPN server of an affected device. A successful exploit could allow the attacker to cause the Cisco AnyConnect VPN server to restart, resulting in the failure of the established SSL VPN connections and forcing remote users to initiate a new VPN connection and reauthenticate. A sustained attack could prevent new SSL VPN connections from being established. Note: When the attack traffic stops, the Cisco AnyConnect VPN server recovers gracefully without requiring manual intervention.

Multiple vulnerabilities in the Cisco AnyConnect VPN server of Cisco Meraki MX and Cisco Meraki Z Series Teleworker Gateway devices could allow an unauthenticated, remote attacker to cause a DoS condition in the AnyConnect service on an affected device. These vulnerabilities are due to insufficient validation of client-supplied parameters while establishing an SSL VPN session. An attacker could exploit these vulnerabilities by sending a crafted HTTPS request to the VPN server of an affected device. A successful exploit could allow the attacker to cause the Cisco AnyConnect VPN server to restart, resulting in the failure of the established SSL VPN connections and forcing remote users to initiate a new VPN connection and reauthenticate. A sustained attack could prevent new SSL VPN connections from being established. Note: When the attack traffic stops, the Cisco AnyConnect VPN server recovers gracefully without requiring manual intervention.

A vulnerability in the IPv4 Software-Defined Access (SD-Access) fabric edge node feature of Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause high CPU utilization and stop all traffic processing, resulting in a denial of service (DoS) condition on an affected device. This vulnerability is due to improper handling of certain IPv4 packets. An attacker could exploit this vulnerability by sending certain IPv4 packets to an affected device. A successful exploit could allow the attacker to cause the device to exhaust CPU resources and stop processing traffic, resulting in a DoS condition.

Unspecified vulnerability in the Session Border Controller (SBC) before 3.0(2) for Cisco 7600 series routers allows remote attackers to cause a denial of service (SBC card reload) via crafted packets to TCP port 2000.

A vulnerability in the implementation of the IPv4 fragmentation reassembly code in Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to improper management of resources during fragment reassembly. An attacker could exploit this vulnerability by sending specific sizes of fragmented packets to an affected device or through a Virtual Fragmentation Reassembly (VFR)-enabled interface on an affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition. Note: This vulnerability affects Cisco ASR 1000 Series Aggregation Services Routers and Cisco cBR-8 Converged Broadband Routers if they are running Cisco IOS XE Software Release 17.12.1 or 17.12.1a.

Unspecified vulnerability in Cisco IOS 12.0 through 12.4, when SIP voice services are enabled, allows remote attackers to cause a denial of service (device crash) via a valid SIP message.

Cisco IOS 12.2 and 12.4, when NAT Skinny Call Control Protocol (SCCP) Fragmentation Support is enabled, allows remote attackers to cause a denial of service (device reload) via segmented SCCP messages, aka Cisco Bug ID CSCsi17020, a different vulnerability than CVE-2008-3810.

Memory leak in the Session Initiation Protocol (SIP) implementation in Cisco IOS 12.2 through 12.4, when VoIP is configured, allows remote attackers to cause a denial of service (memory consumption and voice-service outage) via unspecified valid SIP messages.

Unspecified vulnerability in Cisco Unified Communications Manager (CUCM, formerly CallManager) and Unified Presence Server (CUPS) allows remote attackers to cause a denial of service (loss of cluster services) via unspecified vectors, aka (1) CSCsj09859 and (2) CSCsj19985.

A vulnerability in the DHCP Snooping feature of Cisco IOS XE Software on Software-Defined Access (SD-Access) fabric edge nodes could allow an unauthenticated, remote attacker to cause high CPU utilization on an affected device, resulting in a denial of service (DoS) condition that requires a manual reload to recover. This vulnerability is due to improper handling of IPv4 DHCP packets. An attacker could exploit this vulnerability by sending certain IPv4 DHCP packets to an affected device. A successful exploit could allow the attacker to cause the device to exhaust CPU resources and stop processing traffic, resulting in a DoS condition that requires a manual reload to recover.

A vulnerability in the External Border Gateway Protocol (eBGP) implementation of Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability exists because eBGP traffic is mapped to a shared hardware rate-limiter queue. An attacker could exploit this vulnerability by sending large amounts of network traffic with certain characteristics through an affected device. A successful exploit could allow the attacker to cause eBGP neighbor sessions to be dropped, leading to a DoS condition in the network.

A vulnerability in certain IPv4 fragment-processing functions of Cisco Remote PHY Software could allow an unauthenticated, remote attacker to impact traffic passing through a device, potentially causing a denial of service (DoS) condition. The vulnerability is due to the affected software not validating and calculating certain numerical values in IPv4 packets that are sent to an affected device. An attacker could exploit this vulnerability by sending malformed IPv4 traffic to an affected device. A successful exploit could allow the attacker to disrupt the flow of certain IPv4 traffic passing through an affected device, which could result in a DoS condition.

A vulnerability in the Snort 2 and Snort 3 TCP and UDP detection engine of Cisco Firepower Threat Defense (FTD) Software for Cisco Firepower 2100 Series Appliances could allow an unauthenticated, remote attacker to cause memory corruption, which could cause the Snort detection engine to restart unexpectedly. This vulnerability is due to improper memory management when the Snort detection engine processes specific TCP or UDP packets. An attacker could exploit this vulnerability by sending crafted TCP or UDP packets through a device that is inspecting traffic using the Snort detection engine. A successful exploit could allow the attacker to restart the Snort detection engine repeatedly, which could cause a denial of service (DoS) condition. The DoS condition impacts only the traffic through the device that is examined by the Snort detection engine. The device can still be managed over the network. Note: Once a memory block is corrupted, it cannot be cleared until the Cisco Firepower 2100 Series Appliance is manually reloaded. This means that the Snort detection engine could crash repeatedly, causing traffic that is processed by the Snort detection engine to be dropped until the device is manually reloaded.

Unspecified vulnerability in Cisco IOS 12.2 and 12.4, when the L2TP mgmt daemon process is enabled, allows remote attackers to cause a denial of service (device reload) via a crafted L2TP packet.

A vulnerability in the management and VPN web servers for Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause the device to reload unexpectedly, resulting in a denial of service (DoS) condition. This vulnerability is due to incomplete error checking when parsing an HTTP header. An attacker could exploit this vulnerability by sending a crafted HTTP request to a targeted web server on a device. A successful exploit could allow the attacker to cause a DoS condition when the device reloads.

A vulnerability in the multicast traceroute version 2 (Mtrace2) feature of Cisco IOS XR Software could allow an unauthenticated, remote attacker to exhaust the UDP packet memory of an affected device. This vulnerability exists because the Mtrace2 code does not properly handle packet memory. An attacker could exploit this vulnerability by sending crafted packets to an affected device. A successful exploit could allow the attacker to exhaust the incoming UDP packet memory. The affected device would not be able to process higher-level UDP-based protocols packets, possibly causing a denial of service (DoS) condition. Note: This vulnerability can be exploited using IPv4 or IPv6.

A vulnerability in the Protocol Independent Multicast (PIM) feature of Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to insufficient validation of received IPv4 PIMv2 packets. An attacker could exploit this vulnerability by sending a crafted PIMv2 packet to a PIM-enabled interface on an affected device. A successful exploit could allow the attacker to cause an affected device to reload, resulting in a DoS condition. Note: This vulnerability can be exploited with either an IPv4 multicast or unicast packet.

The Cisco Intrusion Prevention System (IPS) and IOS with Firewall/IPS Feature Set do not properly handle certain full-width and half-width Unicode character encodings, which might allow remote attackers to evade detection of HTTP traffic.

Cisco FirePOWER System Software 5.3.x through 5.3.0.6 and 5.4.x through 5.4.0.3 on FirePOWER 7000 and 8000 appliances, and on the Advanced Malware Protection (AMP) for Networks component on these appliances, allows remote attackers to cause a denial of service (packet-processing outage) via crafted packets, aka Bug ID CSCuu86214.

Cisco AsyncOS 8.0 before 8.0.6-119 on Web Security Appliance (WSA) devices allows remote attackers to cause a denial of service (proxy-process hang) via a crafted HTTP POST request, aka Bug ID CSCuo12171.

A vulnerability with the handling of MPLS traffic for Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause the netstack process to unexpectedly restart, which could cause the device to stop processing network traffic or to reload. This vulnerability is due to lack of proper error checking when processing an ingress MPLS frame. An attacker could exploit this vulnerability by sending a crafted IPv6 packet that is encapsulated within an MPLS frame to an MPLS-enabled interface of the targeted device. A successful exploit could allow the attacker to cause a denial of service (DoS) condition. Note: The IPv6 packet can be generated multiple hops away from the targeted device and then encapsulated within MPLS. The DoS condition may occur when the NX-OS device processes the packet.

The Wide Area Application Services (WAAS) Express implementation in Cisco IOS 15.1 through 15.5 allows remote attackers to cause a denial of service (device reload) via a crafted TCP segment, aka Bug ID CSCuq59708.

Cisco IOS 15.3 and 15.4, Cisco IOS XE 3.8 through 3.11, and Cisco Unified Communications Manager allow remote attackers to cause a denial of service (device reload) via malformed SIP messages, aka Bug ID CSCuj23293.

Cisco IOS 15.5(3)S3, 15.6(1)S2, 15.6(2)S1, and 15.6(2)T1 does not properly dequeue invalid NTP packets, which allows remote attackers to cause a denial of service (interface wedge) by sending many crafted NTP packets, aka Bug ID CSCva35619.