NVIDIA DGX H100 BMC contains a vulnerability in the REST service where an attacker may cause improper input validation. A successful exploit of this vulnerability may lead to escalation of privileges and information disclosure.

An Improper Input Validation vulnerability in the Schweitzer Engineering Laboratories Real-Time Automation Controller (SEL RTAC) Web Interface could allow a remote authenticated attacker to execute arbitrary code. See SEL Service Bulletin dated 2022-11-15 for more details.

NVIDIA DGX H100 BMC contains a vulnerability in the REST service, where an attacker may cause improper input validation. A successful exploit of this vulnerability may lead to escalation of privileges and information disclosure.

NVIDIA DGX H100 BMC contains a vulnerability in the REST service where an attacker may cause improper input validation. A successful exploit of this vulnerability may lead to escalation of privileges and information disclosure.

An Improper Input Validation vulnerability in the Schweitzer Engineering Laboratories Real-Time Automation Controller (SEL RTAC) Web Interface could allow an authenticated remote attacker to use internal resources, allowing a variety of potential effects. See SEL Service Bulletin dated 2022-11-15 for more details.

NVIDIA DGX H100 BMC contains a vulnerability in IPMI, where an attacker may cause improper input validation. A successful exploit of this vulnerability may lead to escalation of privileges, information disclosure, and denial of service.

An Improper Input Validation vulnerability in the Schweitzer Engineering Laboratories Real-Time Automation Controller (SEL RTAC) Web Interface could allow a remote authenticated attacker to execute arbitrary code. See SEL Service Bulletin dated 2022-11-15 for more details.

OpenZeppelin Contracts is a library for secure smart contract development. The proposal creation entrypoint (`propose`) in `GovernorCompatibilityBravo` allows the creation of proposals with a `signatures` array shorter than the `calldatas` array. This causes the additional elements of the latter to be ignored, and if the proposal succeeds the corresponding actions would eventually execute without any calldata. The `ProposalCreated` event correctly represents what will eventually execute, but the proposal parameters as queried through `getActions` appear to respect the original intended calldata. This issue has been patched in 4.8.3. As a workaround, ensure that all proposals that pass through governance have equal length `signatures` and `calldatas` parameters.

A CWE-20: Improper Input Validation vulnerability exists that could allow an authenticated attacker to gain the same privilege as the application on the server when a malicious payload is provided over HTTP for the server to execute.

Magento Commerce versions 2.4.2 (and earlier), 2.4.2-p1 (and earlier) and 2.3.7 (and earlier) are affected by an improper input validation vulnerability. An attacker with admin privileges can upload a specially crafted file to achieve remote code execution.

aiven-extras is a PostgreSQL extension. Versions prior to 1.1.9 contain a privilege escalation vulnerability, allowing elevation to superuser inside PostgreSQL databases that use the aiven-extras package. The vulnerability leverages missing schema qualifiers on privileged functions called by the aiven-extras extension. A low privileged user can create objects that collide with existing function names, which will then be executed instead. Exploiting this vulnerability could allow a low privileged user to acquire `superuser` privileges, which would allow full, unrestricted access to all data and database functions. And could lead to arbitrary code execution or data access on the underlying host as the `postgres` user. The issue has been patched as of version 1.1.9.

The Jetpack WordPress plugin before 12.1.1 does not validate uploaded files, allowing users with author roles or above to manipulate existing files on the site, deleting arbitrary files, and in rare cases achieve Remote Code Execution via phar deserialization.

Apache Airflow Sqoop Provider, versions before 4.0.0, is affected by a vulnerability that allows an attacker pass parameters with the connections, which makes it possible to implement RCE attacks via ‘sqoop import --connect’, obtain airflow server permissions, etc. The attacker needs to be logged in and have authorization (permissions) to create/edit connections. It is recommended to upgrade to a version that is not affected. This issue was reported independently by happyhacking-k, And Xie Jianming and LiuHui of Caiji Sec Team also reported it.

AIMANAGER before B115 on MONITORAPP Application Insight Web Application Firewall (AIWAF) devices with Manager 2.1.0 allows OS Command Injection because of missing input validation on one of the parameters of an HTTP request.

Due to improper input validation, an authenticated remote attacker could execute arbitrary commands on the target system.

Certain Lexmark devices through 2023-02-19 mishandle Input Validation (issue 1 of 4).

A prototype pollution vulnerability exists in Rocket.Chat server <5.2.0 that could allow an attacker to a RCE under the admin account. Any user can create their own server in your cloud and become an admin so this vulnerability could affect the cloud infrastructure. This attack vector also may increase the impact of XSS to RCE which is dangerous for self-hosted users as well.

Path Traversal in OpenCart versions 4.0.0.0 to 4.0.2.2 allows an authenticated user with access/modify privilege on the Log component to empty out arbitrary files on the server

In SugarCRM before 12.0. Hotfix 91155, a crafted request can inject custom PHP code through the EmailTemplates because of missing input validation.

Netdata is an open source option for real-time infrastructure monitoring and troubleshooting. An attacker with the ability to establish a streaming connection can execute arbitrary commands on the targeted Netdata agent. When an alert is triggered, the function `health_alarm_execute` is called. This function performs different checks and then enqueues a command by calling `spawn_enq_cmd`. This command is populated with several arguments that are not sanitized. One of them is the `registry_hostname` of the node for which the alert is raised. By providing a specially crafted `registry_hostname` as part of the health data that is streamed to a Netdata (parent) agent, an attacker can execute arbitrary commands at the remote host as a side-effect of the raised alert. Note that the commands are executed as the user running the Netdata Agent. This user is usually named `netdata`. The ability to run arbitrary commands may allow an attacker to escalate privileges by escalating other vulnerabilities in the system, as that user. The problem has been fixed in: Netdata agent v1.37 (stable) and Netdata agent v1.36.0-409 (nightly). As a workaround, streaming is not enabled by default. If you have previously enabled this, it can be disabled. Limiting access to the port on the recipient Agent to trusted child connections may mitigate the impact of this vulnerability.

In launchDeepLinkIntentToRight of SettingsHomepageActivity.java, there is a possible way to launch arbitrary activities due to improper input validation. This could lead to local escalation of privilege with User execution privileges needed. User interaction is not needed for exploitation.Product: AndroidVersions: Android-12L Android-13Android ID: A-250589026

Magento Commerce versions 2.4.2 (and earlier), 2.4.2-p1 (and earlier) and 2.3.7 (and earlier) are affected by an improper input validation vulnerability. An attacker with admin privileges could make a crafted request to the Adobe Stock API to achieve remote code execution.

Multiple vulnerabilities in the API of Cisco DNA Center Software could allow an authenticated, remote attacker to read information from a restricted container, enumerate user information, or execute arbitrary commands in a restricted container as the root user. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in the web UI of Cisco IOS XE Software could allow an authenticated, remote attacker to perform an injection attack against an affected device. This vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by sending crafted input to the web UI. A successful exploit could allow the attacker to execute arbitrary Cisco IOS XE Software CLI commands with level 15 privileges. Note: This vulnerability is exploitable only if the attacker obtains the credentials for a Lobby Ambassador account. This account is not configured by default.

WordPress version <4.9 contains a CWE-20 Input Validation vulnerability in thumbnail processing that can result in remote code execution. This attack appears to be exploitable via thumbnail upload by an authenticated user and may require additional plugins in order to be exploited however this has not been confirmed at this time. This issue appears to have been partially, but not completely fixed in WordPress 4.9

A vulnerability in the web-based management interface of Cisco Identity Services Engine (ISE) could allow an authenticated, remote attacker to execute arbitrary commands on the underlying operating system of an affected device with the privileges of the web server.

Magento Commerce versions 2.4.2 (and earlier), 2.4.2-p1 (and earlier) and 2.3.7 (and earlier) are affected by an improper input validation vulnerability. An authenticated attacker can trigger an insecure direct object reference in the `V1/customers/me` endpoint to achieve information exposure and privilege escalation.

Magento Commerce versions 2.4.2 (and earlier), 2.4.2-p1 (and earlier) and 2.3.7 (and earlier) are affected by an improper input validation vulnerability. An attacker with admin privileges could upload a specially crafted file in the 'pub/media` directory could lead to remote code execution.

Dell EMC CloudLink 7.1 and all prior versions contain an Improper Input Validation Vulnerability. A remote low privileged attacker, may potentially exploit this vulnerability, leading to execution of arbitrary files on the server

Magento Commerce versions 2.4.2 (and earlier), 2.4.2-p1 (and earlier) and 2.3.7 (and earlier) are affected by an improper input validation vulnerability while saving a customer's details with a specially crafted file. An authenticated attacker with admin privileges can leverage this vulnerability to achieve remote code execution.

Magento Commerce versions 2.4.2 (and earlier), 2.4.2-p1 (and earlier) and 2.3.7 (and earlier) are affected by an improper input validation vulnerability in the API File Option Upload Extension. An attacker with Admin privileges can achieve unrestricted file upload which can result in remote code execution.

Magento Commerce versions 2.4.2 (and earlier), 2.4.2-p1 (and earlier) and 2.3.7 (and earlier) are affected by an improper input validation vulnerability. An attacker with admin privileges can upload a specially crafted file to bypass file extension restrictions and could lead to remote code execution.

A vulnerability was discovered in SPICE before 0.13.90 in the server's protocol handling. An authenticated attacker could send crafted messages to the SPICE server causing a heap overflow leading to a crash or possible code execution.

Hastymail 1.5 and earlier before 20061008 allows remote authenticated users to send arbitrary SMTP commands by placing them after a CRLF.CRLF sequence in the smtp_message parameter. NOTE: this crosses privilege boundaries if the SMTP server configuration prevents a user from establishing a direct SMTP session. NOTE: this is a different type of issue than CVE-2006-5262.

IBM Maximo Asset Management 7.1, 7.5, and 7.6 could allow a remote attacker to hijack a user's session, caused by the failure to invalidate an existing session identifier. An attacker could exploit this vulnerability to gain access to another user's session. IBM X-Force ID: 120253.

This vulnerability allows remote attackers to execute arbitrary code on affected installations of Commvault CommCell 11.22.22. Although authentication is required to exploit this vulnerability, the existing authentication mechanism can be bypassed. The specific flaw exists within the DataProvider class. The issue results from the lack of proper validation of a user-supplied string before executing it as JavaScript code. An attacker can leverage this vulnerability to escape the JavaScript sandbox and execute Java code in the context of NETWORK SERVICE. Was ZDI-CAN-13755.

OSSP shiela 1.1.5 and earlier allows remote authenticated users to execute arbitrary commands on the CVS server via shell metacharacters in a filename that is committed.

MySQL before 5.0.25 and 5.1 before 5.1.12 evaluates arguments of suid routines in the security context of the routine's definer instead of the routine's caller, which allows remote authenticated users to gain privileges through a routine that has been made available using GRANT EXECUTE.

Improper input validation in the Intel(R) Data Center Manager Console before version 3.6.2 may allow an authenticated user to potentially enable escalation of privilege via network access.

SugarCRM before 8.0.4 and 9.x before 9.0.2 allows PHP object injection in the Import module by a Regular user.

The SMBv1 server in Microsoft Windows Vista SP2; Windows Server 2008 SP2 and R2 SP1; Windows 7 SP1; Windows 8.1; Windows Server 2012 Gold and R2; Windows RT 8.1; and Windows 10 Gold, 1511, and 1607; and Windows Server 2016 allows remote attackers to execute arbitrary code via crafted packets, aka "Windows SMB Remote Code Execution Vulnerability." This vulnerability is different from those described in CVE-2017-0143, CVE-2017-0144, CVE-2017-0145, and CVE-2017-0146.

SugarCRM before 8.0.4 and 9.x before 9.0.2 allows PHP object injection in the Administration module by an Admin user.

SolarWinds received a report of a vulnerability related to an input that was not sanitized in WebHelpDesk. SolarWinds has removed this input field to prevent the misuse of this input in the future.

ccca_ajaxhandler.php in Trend Micro Smart Protection Server 2.5 before build 2200, 2.6 before build 2106, and 3.0 before build 1330 allows remote authenticated users to execute arbitrary commands via shell metacharacters in the (1) host or (2) apikey parameter in a register action, (3) enable parameter in a save_stting action, or (4) host or (5) apikey parameter in a test_connection action.

A valid, authenticated XCC user with read only access may gain elevated privileges through a specifically crafted API call.

Twigmo bundled with CS-Cart 4.3.9 and earlier and Twigmo bundled with CS-Cart Multi-Vendor 4.3.9 and earlier allow remote authenticated users to execute arbitrary PHP code on the servers.

Use of unsafe yaml load. Allows instantiation of arbitrary objects. The flaw itself is caused by an unsafe parsing of YAML values which happens whenever an action message is processed to be sent, and allows for the creation of Python objects. Through this flaw in the ROS core package of actionlib, an attacker with local or remote access can make the ROS Master, execute arbitrary code in Python form. Consider yaml.safe_load() instead. Located first in actionlib/tools/library.py:132. See links for more info on the bug.