AVEVA System Platform 2020 stores sensitive information in cleartext, which may allow access to an attacker or a low-privileged user.

In Versa Director, the unencrypted backup files stored on the Versa deployment contain credentials stored within configuration files. These credentials are for various application components such as SNMP, and SSL and Trust keystores.

In onSetRuntimePermissionGrantStateByDeviceAdmin of AdminRestrictedPermissionsUtils.java, there is a possible way for the work profile to read SMS messages due to a permissions bypass. This could lead to local information disclosure with User execution privileges needed. User interaction is not needed for exploitation.Product: AndroidVersions: Android-11Android ID: A-189942529

IBM MQ 7.5, 8.0, 9.0 LTS, 9.1 CD, and 9.1 LTS stores user credentials in plain clear text which can be read by a local user. IBM X-Force ID: 211403.

A flaw was found in openstack-tripleo-heat-templates. Plain passwords from RHSM exist in the logs during OSP13 deployment with subscription-manager.

The vulnerability could expose cleartext credentials from AVEVA InTouch Runtime 2020 R2 and all prior versions (WindowViewer) if an authorized, privileged user creates a diagnostic memory dump of the process and saves it to a non-protected location.

When the Windows Tentacle docker image starts up it logs all the commands that it runs along with the arguments, which writes the Octopus Server API key in plaintext. This does not affect the Linux Docker image

Wowza Streaming Engine before 4.8.8.01 (in a default installation) has cleartext passwords stored in the conf/admin.password file. A regular local user is able to read usernames and passwords.

IBM Jazz for Service Management 1.1.3.10 and IBM Tivoli Netcool/OMNIbus_GUI displays user credentials in plain clear text which can be read by a local user. IBM X-Force ID: 207610.

TP-Link's TL-WPA4220 4.0.2 Build 20180308 Rel.37064 does not use SSL by default. Attacker on the local network can monitor traffic and capture the cookie and other sensitive information.

ZOLL Defibrillator Dashboard, v prior to 2.2, The affected products contain credentials stored in plaintext. This could allow an attacker to gain access to sensitive information.

An issue was discovered in SmartFoxServer 2.17.0. Cleartext password disclosure can occur via /config/server.xml.

A vulnerability of storing sensitive information insecurely in Property Settings prior to SMR Nov-2021 Release 1 allows attackers to read ESN value without priviledge.

Dell ECS, versions 3.8.1.0 through 3.8.1.7, and Dell ObjectScale versions prior to 4.2.0.0, contains a Cleartext Storage of Sensitive Information vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to Information disclosure.

Sensitive information was stored in plain text in a file that is accessible by a user with a local account in Hybrid Cloud Observability (HCO)/ SolarWinds Platform 2022.4. No other versions are affected

Netgear RAX43 version 1.0.3.96 stores sensitive information in plaintext. All usernames and passwords for the device's associated services are stored in plaintext on the device. For example, the admin password is stored in plaintext in the primary configuration file on the device.

IBM Security Verify Information Queue 1.0.6 and 1.0.7 could disclose highly sensitive information to a local user due to inproper storage of a plaintext cryptographic key. IBM X-Force ID: 198187.

In multiple functions of StorageManagerService.java and UserManagerService.java, there is a possible way to leave user's directories unencrypted due to a logic error in the code. This could lead to local information disclosure with no additional execution privileges needed. User interaction is not needed for exploitation.Product: AndroidVersions: Android-10 Android-11 Android-12 Android-12LAndroid ID: A-224585613

The implementation of Brave Desktop's privacy-preserving analytics system (P3A) between 1.1 and 1.18.35 logged the timestamp of when the user last opened an incognito window, including Tor windows. The intended behavior was to log the timestamp for incognito windows excluding Tor windows. Note that if a user has P3A enabled, the timestamp is not sent to Brave's server, but rather a value from:Used in last 24hUsed in last week but not 24hUsed in last 28 days but not weekEver used but not in last 28 daysNever usedThe privacy risk is low because a local attacker with disk access cannot tell if the timestamp corresponds to a Tor window or a non-Tor incognito window.

MELAG FTP Server 2.2.0.4 stores unencrpyted passwords of FTP users in a local configuration file.

Rich Text Edit Control Information Disclosure Vulnerability

IBM UrbanCode Deploy (UCD) 7.0.3.0, 7.0.4.0, 7.0.5.3, 7.0.5.4, 7.1.0.0, 7.1.1.0, 7.1.1.1, and 7.1.1.2, stores keystore passwords in plain text after a manual edit, which can be read by a local user. IBM X-Force ID: 191944.

In the Linux kernel, the following vulnerability has been resolved: KEYS: trusted: dcp: fix leak of blob encryption key Trusted keys unseal the key blob on load, but keep the sealed payload in the blob field so that every subsequent read (export) will simply convert this field to hex and send it to userspace. With DCP-based trusted keys, we decrypt the blob encryption key (BEK) in the Kernel due hardware limitations and then decrypt the blob payload. BEK decryption is done in-place which means that the trusted key blob field is modified and it consequently holds the BEK in plain text. Every subsequent read of that key thus send the plain text BEK instead of the encrypted BEK to userspace. This issue only occurs when importing a trusted DCP-based key and then exporting it again. This should rarely happen as the common use cases are to either create a new trusted key and export it, or import a key blob and then just use it without exporting it again. Fix this by performing BEK decryption and encryption in a dedicated buffer. Further always wipe the plain text BEK buffer to prevent leaking the key via uninitialized memory.

Sandboxie is a sandbox-based isolation software for 32-bit and 64-bit Windows NT-based operating systems. In versions 1.16.1 and below, a critical security vulnerability exists in password handling mechanisms. During encrypted sandbox creation, user passwords are transmitted via shared memory, exposing them to potential interception. The vulnerability is particularly severe during password modification operations, where both old and new passwords are passed as plaintext command-line arguments to the Imbox process without any encryption or obfuscation. This implementation flaw allows any process within the user session, including unprivileged processes, to retrieve these sensitive credentials by reading the command-line arguments, thereby bypassing standard privilege requirements and creating a significant security risk. This is fixed in version 1.16.2.

In JetBrains TeamCity before 2025.07 password exposure was possible via command line in the "hg pull" command

IBM Verify Gateway (IVG) 1.0.0 and 1.0.1 stores highly sensitive information in cleartext that could be obtained by a user. IBM X-Force ID: 179004.

IBM UrbanCode Deploy (UCD) 6.2.7.9, 7.0.5.4, and 7.1.1.1 stores user credentials in plain in clear text which can be read by a local user. IBM X-Force ID: 190908.

In JetBrains TeamCity before 2025.07 user credentials were stored in plain text in memory snapshots

IBM Cognos Analytics 11.1.7, 11.2.0, and 11.2.1 stores user credentials in plain clear text which can be read by a local privileged user. IBM X-Force ID: 213554.

IBM StoredIQ 7.6.0.17 through 7.6.0.20 could disclose sensitive information to a local user due to data in certain directories not being encrypted when it contained symbolic links. IBM X-Force ID: 175133.

NCH Quorum v2.03 and earlier allows local users to discover cleartext login information relating to users by reading the local .dat configuration files.

A flaw was found in Ceph-ansible v4.0.41 where it creates an /etc/ceph/iscsi-gateway.conf with insecure default permissions. This flaw allows any user on the system to read sensitive information within this file. The highest threat from this vulnerability is to confidentiality.

Application Access Server (A-A-S) 2.0.48 stores (1) passwords and (2) the port keyword in cleartext in aas.ini, which allows local users to obtain sensitive information by reading this file.

Cleartext storage of sensitive information in Windows Kernel allows an unauthorized attacker to bypass a security feature locally.

An issue in Texas Instruments Fusion Digital Power Designer v.7.10.1 allows a local attacker to obtain sensitive information via the plaintext storage of credentials

Jenkins Zephyr for JIRA Test Management Plugin 1.5 and earlier stores its credentials in plain text in a global configuration file on the Jenkins master file system.

Plaintext vulnerability in the Gallery search module. Impact: Successful exploitation of this vulnerability will affect availability.

1Password for Mac 7.2.4 through 7.9.x before 7.9.3 is vulnerable to a process validation bypass. Malicious software running on the same computer can exfiltrate secrets from 1Password provided that 1Password is running and is unlocked. Affected secrets include vault items and derived values used for signing in to 1Password.

Jenkins ElasTest Plugin 1.2.1 and earlier stores its server password unencrypted in its global configuration file on the Jenkins controller where it can be viewed by users with access to the Jenkins controller file system.

An issue in Shenzen Tenda Technology CP3V2.0 V11.10.00.2311090948 allows a local attacker to obtain sensitive information via the password component.

Unencrypted storage in the database in Two App Studio Journey v5.5.9 for iOS allows local attackers to extract sensitive data via direct access to the app’s filesystem.

IBM Cloud Pak for Security 1.10.0.0 through 1.10.11.0 and IBM QRadar Suite Software 1.10.12.0 through 1.10.22.0 stores potentially sensitive information in log files that could be read by a local user. IBM X-Force ID: 281429.

IBM QRadar Suite Software 1.10.12.0 through 1.10.23.0 and IBM Cloud Pak for Security 1.10.0.0 through 1.10.11.0 stores user credentials in plain clear text which can be read by a local user. IBM X-Force ID: 281430.

An issue was discovered on Nescomed Multipara Monitor M1000 devices. The onboard Flash memory stores data in cleartext, without integrity protection against tampering.

A vulnerability in a password management API in Brocade Fabric OS versions before v9.2.1, v9.2.0b, v9.1.1d, and v8.2.3e prints sensitive information in log files. This could allow an authenticated user to view the server passwords for protocols such as scp and sftp. Detail. When the firmwaredownload command is incorrectly entered or points to an erroneous file, the firmware download log captures the failed command, including any password entered in the command line.

A vulnerability in Brocade SANnav before v2.3.1 and v2.3.0a could allow an authenticated user to print the Auth, Priv, and SSL key store passwords in unencrypted logs by manipulating command variables.

IBM Concert 1.0.0 through 2.1.0 stores potentially sensitive information in log files that could be read by a local user.

Keybase Desktop Client before 5.6.0 on Windows and macOS, and before 5.6.1 on Linux, allows an attacker to obtain potentially sensitive media (such as private pictures) in the Cache and uploadtemps directories. It fails to effectively clear cached pictures, even after deletion via normal methodology within the client, or by utilizing the "Explode message/Explode now" functionality. Local filesystem access is needed by the attacker.