Certain modem models developed by Askey has a Stack-based Buffer Overflow vulnerability, allowing unauthenticated remote attackers to control the program's execution flow and potentially execute arbitrary code.

Out of boundary access is possible as there is no validation of data accessed against the received size of the packet in case of malicious firmware in Snapdragon Auto, Snapdragon Compute, Snapdragon Connectivity, Snapdragon Consumer Electronics Connectivity, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon Mobile, Snapdragon Voice & Music, Snapdragon Wearables in APQ8009, APQ8017, APQ8053, APQ8096AU, APQ8098, MDM9206, MDM9207C, MDM9607, MDM9640, MDM9650, MSM8909W, MSM8917, MSM8920, MSM8937, MSM8940, MSM8953, MSM8996AU, MSM8998, Nicobar, QCN7605, QCS405, QCS605, QM215, SA6155P, SDA660, SDA845, SDM429, SDM439, SDM450, SDM630, SDM632, SDM636, SDM660, SDM670, SDM710, SDM845, SDX20, SDX24, SDX55, SM6150, SM7150, SM8150, SM8250, SXR1130, SXR2130

UTCB object has a function pointer called by the reaper to deallocate its memory resources and this address can potentially be corrupted by stack overflow in Snapdragon Auto, Snapdragon Compute, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon Mobile, Snapdragon Wired Infrastructure and Networking in MDM9205, MDM9650, QCS605, SA6155P, SC8180X, SDA845, SDM670, SDM710, SDM845, SDM850, SDX55, SM6150, SM7150, SM8150, SM8250, SXR1130, SXR2130

In WebAccess/SCADA Versions 8.3.5 and prior, multiple heap-based buffer overflow vulnerabilities are caused by a lack of proper validation of the length of user-supplied data. Exploitation of these vulnerabilities may allow remote code execution. Note: A different vulnerability than CVE-2019-10991.

Buffer overflow during SIB read when network configures complete sib list along with first and last segment of other SIB in Snapdragon Auto, Snapdragon Compute, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon IoT, Snapdragon Mobile, Snapdragon Voice & Music, Snapdragon Wearables in APQ8009, APQ8017, APQ8053, APQ8096, APQ8096AU, APQ8098, MDM9150, MDM9206, MDM9607, MDM9615, MDM9625, MDM9635M, MDM9640, MDM9645, MDM9650, MDM9655, MSM8905, MSM8909, MSM8909W, MSM8917, MSM8920, MSM8937, MSM8939, MSM8940, MSM8953, MSM8996AU, MSM8998, Nicobar, QCM2150, QCS605, QM215, SC8180X, SDA660, SDA845, SDM429, SDM439, SDM450, SDM630, SDM632, SDM636, SDM660, SDM670, SDM710, SDM845, SDM850, SDX20, SDX24, SDX55, SM6150, SM7150, SM8150, SXR1130

A vulnerability was found in D-Link DIR-513 1.10. It has been rated as critical. Affected by this issue is the function websAspInit of the file /goform/formSetWanPPPoE. The manipulation of the argument curTime leads to buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability was found in D-Link DIR-513 1.0. It has been rated as critical. This issue affects the function formLanguageChange of the file /goform/formLanguageChange of the component HTTP POST Request Handler. The manipulation of the argument curTime leads to stack-based buffer overflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability was found in D-Link DIR-513 up to 1.10 and classified as critical. This issue affects the function formSetWanL2TPcallback of the file /goform/formSetWanL2TPtriggers of the component HTTP POST Request Handler. The manipulation leads to stack-based buffer overflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability classified as critical was found in D-Link DI-8100 1.0. This vulnerability affects the function sprintf of the file /upnp_ctrl.asp of the component jhttpd. The manipulation of the argument remove_ext_proto/remove_ext_port leads to stack-based buffer overflow. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used.

A vulnerability was found in lwIP up to 2.2.1. Affected is the function snmp_parse_inbound_frame of the file src/apps/snmp/snmp_msg.c of the component snmpv3 USM Handler. Performing a manipulation of the argument msgAuthenticationParameters results in stack-based buffer overflow. The attack may be initiated remotely. The patch is named 0c957ec03054eb6c8205e9c9d1d05d90ada3898c. It is suggested to install a patch to address this issue.

Stack buffer overflow vulnerability in D-Link DIR-513 v1.10 via the goform/formDeviceReboot.

Tenda AX3 firmware v16.03.12.11 contains a stack-based buffer overflow in the formGetIptv function due to improper handling of the stbpvid stack buffer, which may result in memory corruption and remote code execution.

A missing bounds check within the audio decoding pipeline for WhatsApp calls in WhatsApp for Android prior to v2.21.3, WhatsApp Business for Android prior to v2.21.3, WhatsApp for iOS prior to v2.21.32, and WhatsApp Business for iOS prior to v2.21.32 could have allowed an out-of-bounds write.

Stack buffer overflow vulnerability in D-Link DIR-513 v1.10 via the curTime parameter to goform/formSetMACFilter.

An issue was discovered in HERMES 2.1 in the MBUX Infotainment System on Mercedes-Benz vehicles through 2021. There is an out-of-bounds array access in RemoteDiagnosisApp.

Stack buffer overflow vulnerability in D-Link DIR-513 v1.10 via the curTime parameter to goform/formSetWANType_Wizard5.

An issue was discovered in OpenSatKit 2.2.1. The EventErrStr buffer has a fixed size of 256 bytes. The code uses sprintf to format two filenames (Source1Filename and the string returned by FileUtil_FileStateStr) into this buffer without any length checking and without using bounded format specifiers such as %.*s. If the filename length approaches OS_MAX_PATH_LEN (commonly 64-256 bytes), the combined formatted string together with constant text can exceed 256 bytes, resulting in a stack buffer overflow. Such unsafe sprintf calls are scattered across multiple functions in file.c, including FILE_ConcatenateCmd() and ConcatenateFiles(), all of which fail to validate the output length.

A vulnerability, which was classified as critical, has been found in D-Link DIR-825 2.10. This issue affects the function sub_410DDC of the file switch_language.cgi of the component httpd. The manipulation of the argument Language leads to stack-based buffer overflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

Stack buffer overflow vulnerability in D-Link DIR-513 v1.10 via the curTime parameter to goform/formSetQoS.

Tenda AX3 firmware v16.03.12.11 contains a stack-based buffer overflow in the formGetIptv function due to improper handling of the citytag stack buffer, which may result in memory corruption and remote code execution.

Stack buffer overflow vulnerability in D-Link DIR-513 v1.10 via the curTime parameter to goform/formLogin.

Stack buffer overflow vulnerability in D-Link DIR-513 v1.10 via the curtime parameter to the goform/formEasySetupWWConfig component

DBI versions before 1.648 for Perl saved errors in a limited-sized buffer. Error messages that were returned when RaiseError, PrintError or HandleError were set were written to a 200-byte buffer without a length limit. Attackers that can influence the error text in an application can trigger a buffer overflow.

FreeType 2 before 2016-12-16 has an out-of-bounds write caused by a heap-based buffer overflow related to the cff_parser_run function in cff/cffparse.c.

Tenda AC9 V3.0 V15.03.06.42_multi was discovered to contain a stack overflow via parameter firewallEn at url /goform/SetFirewallCfg.

Stack buffer overflow vulnerability in D-Link DIR-513 v1.10 via the curTime parameter to goform/formAutoDetecWAN_wizard4.

Stack buffer overflow vulnerability in D-Link DIR-513 v1.10 via the curTime parameter to goform/formSetPortTr.

Stack buffer overflow vulnerability in D-Link DIR-513 v1.10 via the curTime parameter to goform/formEasySetupWizard.

Stack buffer overflow vulnerability in D-Link DIR-513 v1.10 via the curTime parameter to goform/formSetDomainFilter.

Stack buffer overflow vulnerability in D-Link DIR-513 v1.10 via POST to the goform/formAdvFirewall component.

Stack buffer overflow vulnerability in D-Link DIR-513 v1.10 via the curTime parameter to goform/formSetWAN_Wizard51.

Memory safety bugs present in Firefox ESR 140.9.0, Thunderbird ESR 140.9.0, Firefox 149.0.1 and Thunderbird 149.0.1. Some of these bugs showed evidence of memory corruption and we presume that with enough effort some of these could have been exploited to run arbitrary code. This vulnerability was fixed in Firefox 149.0.2, Firefox ESR 140.9.1, Thunderbird 149.0.2, and Thunderbird 140.9.1.

Stack buffer overflow vulnerability in D-Link DIR-513 v1.10 via the curTime parameter to goform/formAdvNetwork.

Stack buffer overflow vulnerability in D-Link DIR-513 v1.10 via the curTime parameter to goform/formSetWAN_Wizard55.

Stack buffer overflow vulnerability in D-Link DIR-513 v1.10 via the curTime parameter to goform/formSetWizardSelectMode.

Tenda AX3 firmware v16.03.12.11 contains a stack overflow in formSetIptv via the list parameter, which can cause memory corruption and enable remote code execution.

Stack buffer overflow vulnerability in D-Link DIR-513 v1.10 via the curTime parameter to goform/formLogin,goform/getAuthCode.

Tenda AX3 firmware v16.03.12.11 contains a stack overflow in formSetIptv via the vlanId parameter, which can cause memory corruption and enable remote code execution.

There is an Input Verification Vulnerability in Huawei Smartphone. Successful exploitation of this vulnerability may cause out-of-bounds memory write.

The infocmp command-line tool in ncurses before 6.5-20251213 has a stack-based buffer overflow in analyze_string in progs/infocmp.c.

xrdp is an open source RDP server. xrdp before v0.10.5 contains an unauthenticated stack-based buffer overflow vulnerability. The issue stems from improper bounds checking when processing user domain information during the connection sequence. If exploited, the vulnerability could allow remote attackers to execute arbitrary code on the target system. The vulnerability allows an attacker to overwrite the stack buffer and the return address, which could theoretically be used to redirect the execution flow. The impact of this vulnerability is lessened if a compiler flag has been used to build the xrdp executable with stack canary protection. If this is the case, a second vulnerability would need to be used to leak the stack canary value. Upgrade to version 0.10.5 to receive a patch. Additionally, do not rely on stack canary protection on production systems.

Tenda AC10 US_AC10V4.0si_V16.03.10.13_cn was discovered to contain a stack overflow via the saveParentControlInfo function. This vulnerability allows attackers to cause a Denial of Service (DoS) or execute arbitrary code via a crafted payload.

A remote, unauthenticated attacker can trigger memory corruption in Zephyr's HTTP server WebSocket upgrade path by sending a crafted Sec-WebSocket-Key header. The HTTP/1 header parser copies the header into a fixed-size buffer using a bounded copy that does not guarantee NUL termination when the input length reaches the buffer size. During upgrade handling the buffer is copied to a local stack buffer and passed to strlen(); if no NUL exists in-bounds, strlen() reads beyond the stack buffer and subsequent concatenation with the WebSocket magic string can write out of bounds. This leads to out-of-bounds read and write on stack memory, resulting in crash (denial of service) and potentially code execution. The path is reachable when CONFIG_HTTP_SERVER_WEBSOCKET is enabled.

A stack-based buffer overflow exists in the GoAhead-Webs HTTP daemon on KuWFi 4G LTE AC900 devices with firmware 1.0.13. The /goform/formMultiApnSetting handler uses sprintf() to copy the user-supplied pincode parameter into a fixed 132-byte stack buffer with no bounds checks. This allows an attacker to corrupt adjacent stack memory, crash the web server, and (under certain conditions) may enable arbitrary code execution.

An attacker could send a crafted HTTP/HTTPS request to render the web server unavailable and/or lead to remote code execution caused by a stack-based buffer overflow vulnerability. A cold restart is required for recovering CompactLogix 5370 L1, L2, and L3 Controllers, Compact GuardLogix 5370 controllers, and Armor Compact GuardLogix 5370 Controllers Versions 20 - 30 and earlier.

NETGEAR RAX30 soap_serverd Stack-based Buffer Overflow Authentication Bypass Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of NETGEAR RAX30 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the soap_serverd binary. When parsing SOAP message headers, the process does not properly validate the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to bypass authentication on the system. Was ZDI-CAN-19839.

** UNSUPPORTED WHEN ASSIGNED ** A vulnerability was found in Vivotek SD9364 VVTK-0103f. It has been declared as critical. This vulnerability affects the function read of the component httpd. The manipulation of the argument Content-Length leads to stack-based buffer overflow. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. VDB-273526 is the identifier assigned to this vulnerability. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. NOTE: Vendor was contacted early and confirmed that the affected release tree is end-of-life.

Contiki-NG is an open-source, cross-platform operating system for internet of things (IoT) devices. In versions 4.8 and prior, an out-of-bounds write can occur in the BLE L2CAP module of the Contiki-NG operating system. The network stack of Contiki-NG uses a global buffer (packetbuf) for processing of packets, with the size of PACKETBUF_SIZE. In particular, when using the BLE L2CAP module with the default configuration, the PACKETBUF_SIZE value becomes larger then the actual size of the packetbuf. When large packets are processed by the L2CAP module, a buffer overflow can therefore occur when copying the packet data to the packetbuf. The vulnerability has been patched in the "develop" branch of Contiki-NG, and will be included in release 4.9. The problem can be worked around by applying the patch manually.

A stack-based buffer overflow vulnerability was identified in TOTOLINK A950RG V4.1.2cu.5204_B20210112. The flaw exists in the setIpQosRules interface of /lib/cste_modules/firewall.so where the comment parameter is not properly validated for length.