Complex queries can cause excessive memory usage in MongoDB Query Planner resulting in an Out-Of-Memory Crash.

An issue in Technitium DNS Server v.13.5 allows a remote attacker to cause a denial of service via the rate-limiting component

An Environment (CWE-2) vulnerability exists in SoMachine Basic, all versions, and Modicon M221(all references, all versions prior to firmware V1.10.0.0) which could cause cycle time impact when flooding the M221 ethernet interface while the Ethernet/IP adapter is activated.

In Matter (aka connectedhomeip or Project CHIP) through 1.4.0.0 before e3277eb, unlimited user label appends in a userlabel cluster can lead to a denial of service (resource exhaustion).

WebLog Expert Web Server Enterprise 9.4 allows Remote Denial Of Service (daemon crash) via a long HTTP Accept Header to TCP port 9991.

ESXi contains a slow HTTP POST denial-of-service vulnerability in rhttpproxy. A malicious actor with network access to ESXi may exploit this issue to create a denial-of-service condition by overwhelming rhttpproxy service with multiple requests.

apollo-compiler is a query-based compiler for the GraphQL query language. Prior to 1.27.0, a vulnerability in Apollo Compiler allowed queries with deeply nested and reused named fragments to be prohibitively expensive to validate. Named fragments were being processed once per fragment spread in some cases during query validation, leading to exponential resource usage when deeply nested and reused fragments were involved. This could lead to excessive resource consumption and denial of service in applications. This vulnerability is fixed in 1.27.0.

Http4s (http4s-blaze-server) is a minimal, idiomatic Scala interface for HTTP services. Http4s before versions 0.21.17, 0.22.0-M2, and 1.0.0-M14 have a vulnerability which can lead to a denial-of-service. Blaze-core, a library underlying http4s-blaze-server, accepts connections unboundedly on its selector pool. This has the net effect of amplifying degradation in services that are unable to handle their current request load, since incoming connections are still accepted and added to an unbounded queue. Each connection allocates a socket handle, which drains a scarce OS resource. This can also confound higher level circuit breakers which work based on detecting failed connections. http4s provides a general "MaxActiveRequests" middleware mechanism for limiting open connections, but it is enforced inside the Blaze accept loop, after the connection is accepted and the socket opened. Thus, the limit only prevents the number of connections which can be simultaneously processed, not the number of connections which can be held open. In 0.21.17, 0.22.0-M2, and 1.0.0-M14, a new "maxConnections" property, with a default value of 1024, has been added to the `BlazeServerBuilder`. Setting the value to a negative number restores unbounded behavior, but is strongly disrecommended. The NIO2 backend does not respect `maxConnections`. Its use is now deprecated in http4s-0.21, and the option is removed altogether starting in http4s-0.22. There are several possible workarounds described in the refrenced GitHub Advisory GHSA-xhv5-w9c5-2r2w.

A regular expression denial of service (ReDoS) vulnerability exits in cbioportal 3.6.21 and older via a POST request to /ProteinArraySignificanceTest.json.

A Denial-of-Service (DoS) vulnerability was discovered in Team Server in HelpSystems Cobalt Strike 4.2 and 4.3. It allows remote attackers to crash the C2 server thread and block beacons' communication with it.

Fastify node module before 0.38.0 is vulnerable to a denial-of-service attack by sending a request with "Content-Type: application/json" and a very large payload.

sshpk is vulnerable to ReDoS when parsing crafted invalid public keys.

An allocation-size-too-big bug in the component /imagebuf.cpp of OpenImageIO v3.1.0.0dev may cause a Denial of Service (DoS) when the program to requests to allocate too much space.

A flaw was found in EAP-7 during deserialization of certain classes, which permits instantiation of HashMap and HashTable with no checks on resources consumed. This issue could allow an attacker to submit malicious requests using these classes, which could eventually exhaust the heap and result in a Denial of Service.

ReadJXLImage in JXL in GraphicsMagick before 1.3.46 lacks image dimension resource limits.

Rekor is an open source software supply chain transparency log. Rekor prior to version 1.1.1 may crash due to out of memory (OOM) conditions caused by reading archive metadata files into memory without checking their sizes first. Verification of a JAR file submitted to Rekor can cause an out of memory crash if files within the META-INF directory of the JAR are sufficiently large. Parsing of an APK file submitted to Rekor can cause an out of memory crash if the .SIGN or .PKGINFO files within the APK are sufficiently large. The OOM crash has been patched in Rekor version 1.1.1. There are no known workarounds.

jsPDF is a library to generate PDFs in JavaScript. Prior to 3.0.1, user control of the first argument of the addImage method results in CPU utilization and denial of service. If given the possibility to pass unsanitised image urls to the addImage method, a user can provide a harmful data-url that results in high CPU utilization and denial of service. Other affected methods are html and addSvgAsImage. The vulnerability was fixed in jsPDF 3.0.1.

LengthPrefixedMessageReader in gRPC Swift 1.1.0 and earlier allocates buffers of arbitrary length, which allows remote attackers to cause uncontrolled resource consumption and deny service.

A denial-of-service issue was addressed with improved input validation. This issue is fixed in iOS 17.7.1 and iPadOS 17.7.1, iOS 18.1 and iPadOS 18.1, macOS Sequoia 15.1, macOS Sonoma 14.7.1, macOS Ventura 13.7.1, tvOS 18.1, visionOS 2.1, watchOS 11.1. A remote attacker may be able to cause a denial-of-service.

An allocation of resources without limits or throttling vulnerability has been reported to affect File Station 5. If a remote attacker gains a user account, they can then exploit the vulnerability to prevent other systems, applications, or processes from accessing the same type of resource. We have already fixed the vulnerability in the following version: File Station 5 5.5.6.4847 and later

In Qt through 5.14.1, the WebSocket implementation accepts up to 2GB for frames and 2GB for messages. Smaller limits cannot be configured. This makes it easier for attackers to cause a denial of service (memory consumption).

Any request send to a Netgear Nighthawk Wifi6 Router (RAX30)'s web service containing a “Content-Type” of “multipartboundary=” will result in the request body being written to “/tmp/mulipartFile” on the device itself. A sufficiently large file will cause device resources to be exhausted, resulting in the device becoming unusable until it is rebooted.

An issue was discovered in ebankIT before 7. A Denial-of-Service attack is possible through the GET parameter EStatementsIds located on the /Controls/Generic/EBMK/Handlers/EStatements/DownloadEStatement.ashx endpoint. The GET parameter accepts over 100 comma-separated e-statement IDs without throwing an error. When this many IDs are supplied, the server takes around 60 seconds to respond and successfully generate the expected ZIP archive (during this time period, no other pages load). A threat actor could issue a request to this endpoint with 100+ statement IDs every 30 seconds, potentially resulting in an overload of the server for all users.

DDOS reflection amplification vulnerability in eAut module of Ruckus Wireless SmartZone controller that allows remote attackers to perform DOS attacks via crafted request.

Expr is an expression language and expression evaluation for Go. Prior to version 1.17.0, if the Expr expression parser is given an unbounded input string, it will attempt to compile the entire string and generate an Abstract Syntax Tree (AST) node for each part of the expression. In scenarios where input size isn’t limited, a malicious or inadvertent extremely large expression can consume excessive memory as the parser builds a huge AST. This can ultimately lead to*excessive memory usage and an Out-Of-Memory (OOM) crash of the process. This issue is relatively uncommon and will only manifest when there are no restrictions on the input size, i.e. the expression length is allowed to grow arbitrarily large. In typical use cases where inputs are bounded or validated, this problem would not occur. The problem has been patched in the latest versions of the Expr library. The fix introduces compile-time limits on the number of AST nodes and memory usage during parsing, preventing any single expression from exhausting resources. Users should upgrade to Expr version 1.17.0 or later, as this release includes the new node budget and memory limit safeguards. Upgrading to v1.17.0 ensures that extremely deep or large expressions are detected and safely aborted during compilation, avoiding the OOM condition. For users who cannot immediately upgrade, the recommended workaround is to impose an input size restriction before parsing. In practice, this means validating or limiting the length of expression strings that your application will accept. For example, set a maximum allowable number of characters (or nodes) for any expression and reject or truncate inputs that exceed this limit. By ensuring no unbounded-length expression is ever fed into the parser, one can prevent the parser from constructing a pathologically large AST and avoid potential memory exhaustion. In short, pre-validate and cap input size as a safeguard in the absence of the patch.

An unauthenticated remote attacker can cause a Denial of Service by sending a large number of requests to the http service on port 80.

Monero through 0.18.3.4 before ec74ff4 does not have response limits on HTTP server connections.

An issue was discovered in Django 5.1 before 5.1.7, 5.0 before 5.0.13, and 4.2 before 4.2.20. The django.utils.text.wrap() method and wordwrap template filter are subject to a potential denial-of-service attack when used with very long strings.

Go Ethereum (aka geth) 1.8.19 allows attackers to cause a denial of service (memory consumption) by rewriting the length of a dynamic array in memory, and then writing data to a single memory location with a large index number, as demonstrated by use of "assembly { mstore }" followed by a "c[0xC800000] = 0xFF" assignment.

Netty is a network application framework for development of protocol servers and clients. In versions of netty-transport-sctp prior to 4.1.135.Final and 4.2.15.Final, for each non-complete SctpMessage fragment the handler does `fragments.put(streamId, Unpooled.wrappedBuffer(frag, byteBuf))`, wrapping the previous accumulator and the new slice into a *new* CompositeByteBuf every time. After N fragments the accumulator is an N-deep chain of composites, each holding references and component arrays; readableBytes()/getBytes() on the final buffer recurse N levels. There is no limit on N, on total bytes, or on the number of streamIdentifiers an attacker can open (each gets its own map entry). A peer that never sets the `complete` flag can grow this structure indefinitely from tiny 1-byte DATA chunks. Versions 4.1.135.Final and 4.2.15.Final patch the issue.

rPGP is a pure Rust implementation of OpenPGP. Prior to 0.14.1, rPGP allows attackers to trigger resource exhaustion vulnerabilities in rpgp by providing crafted messages. This affects general message parsing and decryption with symmetric keys.

`silverstripe/graphql` serves Silverstripe data as GraphQL representations. In versions 4.2.2 and 4.1.1, an attacker could use a specially crafted graphql query to execute a denial of service attack against a website which has a publicly exposed graphql endpoint. This mostly affects websites with particularly large/complex graphql schemas. Users should upgrade to `silverstripe/graphql` 4.2.3 or 4.1.2 to remedy the vulnerability.

Allocation of resources without limits or throttling in ASP.NET Core allows an unauthorized attacker to deny service over a network.

Uncontrolled resource consumption in Remote Desktop Gateway Service allows an unauthorized attacker to deny service over a network.

There is a Memory leakage vulnerability in Smartphone.Successful exploitation of this vulnerability may cause memory exhaustion.

cpp-httplib is a C++11 single-file header-only cross platform HTTP/HTTPS library. Prior to 0.43.4, negative chunk-size in chunked Transfer-Encoding causes unbounded memory allocation and process crash. The ChunkedDecoder::read_payload function in cpp-httplib (httplib.h) parses the chunk-size field of HTTP chunked transfer encoding using std::strtoul(). Per the C standard (§7.22.1.4), strtoul silently accepts a leading minus sign, performing unsigned wrap-around: strtoul("-2", …, 16) returns ULONG_MAX − 1 (0xFFFFFFFFFFFFFFFE). The library's only guard (line 12833) rejects ULONG_MAX (the result of "-1"), but any other negative value such as "-2" passes validation. The resulting near-maximum value is stored in chunk_remaining and controls how many bytes the server's read loop consumes from the network. This vulnerability is fixed in 0.43.4.

An Allocation of Resources Without Limits or Throttling vulnerability in Juniper Networks Junos OS allows an unauthenticated, network-based attacker to cause Denial of Service (DoS). On all Junos OS QFX5000 Series and EX4000 Series platforms, when a high number of VLANs are configured, a specific DHCP packet will cause PFE hogging which will lead to dropping of socket connections. This issue affects: Juniper Networks Junos OS on QFX5000 Series and EX4000 Series * 21.1 versions prior to 21.1R3-S5; * 21.2 versions prior to 21.2R3-S5; * 21.3 versions prior to 21.3R3-S5; * 21.4 versions prior to 21.4R3-S4; * 22.1 versions prior to 22.1R3-S3; * 22.2 versions prior to 22.2R3-S1; * 22.3 versions prior to 22.3R2-S2, 22.3R3; * 22.4 versions prior to 22.4R2. This issue does not affect Juniper Networks Junos OS versions prior to 21.1R1

OpenTelemetry dotnet is a dotnet telemetry framework. A vulnerability in OpenTelemetry.Api package 1.10.0 to 1.11.1 could cause a Denial of Service (DoS) when a tracestate and traceparent header is received. Even if an application does not explicitly use trace context propagation, receiving these headers can still trigger high CPU usage. This issue impacts any application accessible over the web or backend services that process HTTP requests containing a tracestate header. Application may experience excessive resource consumption, leading to increased latency, degraded performance, or downtime. This vulnerability is fixed in 1.11.2.

IBM API Connect 2018.1 through 2018.3.7 could allow an unauthenticated attacker to cause a denial of service due to not setting limits on JSON payload size. IBM X-Force ID: 148802.

The crewjam/saml go library contains a partial implementation of the SAML standard in golang. Prior to version 0.4.13, the package's use of `flate.NewReader` does not limit the size of the input. The user can pass more than 1 MB of data in the HTTP request to the processing functions, which will be decompressed server-side using the Deflate algorithm. Therefore, after repeating the same request multiple times, it is possible to achieve a reliable crash since the operating system kills the process. This issue is patched in version 0.4.13.

In Bitcoin Core before 0.18.0, a node could be stalled for hours when processing the orphans of a crafted unconfirmed transaction.

Trustwave ModSecurity 3.0.5 through 3.0.8 before 3.0.9 allows a denial of service (worker crash and unresponsiveness) because some inputs cause a segfault in the Transaction class for some configurations.

A vulnerability has been identified where a maliciously crafted message containing a specific chain of characters can cause the chat to enter a hot loop on one of the processes, consuming ~120% CPU and rendering the service unresponsive.

Very large headers can cause resource exhaustion when parsing message. The message-parser normally reads reasonably sized chunks of the message. However, when it feeds them to message-header-parser, it starts building up "full_value" buffer out of the smaller chunks. The full_value buffer has no size limit, so large headers can cause large memory usage. It doesn't matter whether it's a single long header line, or a single header split into multiple lines. This bug exists in all Dovecot versions. Incoming mails typically have some size limits set by MTA, so even largest possible header size may still fit into Dovecot's vsz_limit. So attackers probably can't DoS a victim user this way. A user could APPEND larger mails though, allowing them to DoS themselves (although maybe cause some memory issues for the backend in general). One can implement restrictions on headers on MTA component preceding Dovecot. No publicly available exploits are known.

Every `named` instance configured to run as a recursive resolver maintains a cache database holding the responses to the queries it has recently sent to authoritative servers. The size limit for that cache database can be configured using the `max-cache-size` statement in the configuration file; it defaults to 90% of the total amount of memory available on the host. When the size of the cache reaches 7/8 of the configured limit, a cache-cleaning algorithm starts to remove expired and/or least-recently used RRsets from the cache, to keep memory use below the configured limit. It has been discovered that the effectiveness of the cache-cleaning algorithm used in `named` can be severely diminished by querying the resolver for specific RRsets in a certain order, effectively allowing the configured `max-cache-size` limit to be significantly exceeded. This issue affects BIND 9 versions 9.11.0 through 9.16.41, 9.18.0 through 9.18.15, 9.19.0 through 9.19.13, 9.11.3-S1 through 9.16.41-S1, and 9.18.11-S1 through 9.18.15-S1.

A memory allocation with excessive size value vulnerability in the license verification function of FortiPortal before 6.0.6 may allow an attacker to perform a denial of service attack via specially crafted license blobs.

Dell PowerScale OneFS, versions 9.5.0.0 through 9.10.0.0, contains an uncontrolled resource consumption vulnerability. An unauthenticated attacker with remote access could potentially exploit this vulnerability, leading to denial of service.

IBM Watson CP4D Data Stores 4.6.0 does not properly allocate resources without limits or throttling which could allow a remote attacker with information specific to the system to cause a denial of service. IBM X-Force ID: 248924.

Jenkins 2.393 and earlier, LTS 2.375.3 and earlier uses the Apache Commons FileUpload library without specifying limits for the number of request parts introduced in version 1.5 for CVE-2023-24998 in org.kohsuke.stapler.RequestImpl, allowing attackers to trigger a denial of service.

Multiple vulnerabilities in the Cisco ATA 190 Series Analog Telephone Adapter Software could allow an attacker to perform a command injection attack resulting in remote code execution or cause a denial of service (DoS) condition on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.