Cypress : https://www.infineon.com/ Cypress Bluetooth Mesh SDK BSA0107_05.01.00-BX8-AMESH-08 is affected by: Buffer Overflow. The impact is: execute arbitrary code (remote). The component is: affected function is lower_transport_layer_on_seg. ¶¶ In Cypress Bluetooth Mesh SDK, there is an out-of-bound write vulnerability that can be triggered by sending a series of segmented packets with inconsistent SegN.

An Improper Restriction of Operations within the Bounds of a Memory Buffer issue was discovered in the Continental AG Infineon S-Gold 2 (PMB 8876) chipset on BMW several models produced between 2009-2010, Ford a limited number of P-HEV vehicles, Infiniti 2013 JX35, Infiniti 2014-2016 QX60, Infiniti 2014-2016 QX60 Hybrid, Infiniti 2014-2015 QX50, Infiniti 2014-2015 QX50 Hybrid, Infiniti 2013 M37/M56, Infiniti 2014-2016 Q70, Infiniti 2014-2016 Q70L, Infiniti 2015-2016 Q70 Hybrid, Infiniti 2013 QX56, Infiniti 2014-2016 QX 80, and Nissan 2011-2015 Leaf. A vulnerability in the temporary mobile subscriber identity (TMSI) may allow an attacker to access and control memory. This may allow remote code execution on the baseband radio processor of the TCU.

in OpenHarmony v4.0.0 and prior versions allow a remote attacker arbitrary code execution in pre-installed apps through out-of-bounds write.

in OpenHarmony v4.0.0 and prior versions allow a remote attacker arbitrary code execution in pre-installed apps through out-of-bounds read and write.

Out-of-bounds Write, Integer Underflow (Wrap or Wraparound) vulnerability in Apache NimBLE BASS service. Improper validation when parsing BASS service  "Add Source" and "Modify Source" operation PDU could results in stack buffer overflow or arbitrary out-of-bound read. This can be triggered by nearby devices over Bluetooth connection, however pairing is required prior to accessing BASS service, which depending on device configuration may or may not require user action. This issue affects Apache NimBLE: through 1.9.0. Users are recommended to upgrade to version 1.10.0, which fixes the issue.

Silicon Labs Gecko OS Debug Interface Stack-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of Silicon Labs Gecko OS. Authentication is not required to exploit this vulnerability. The specific flaw exists within the debug interface. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of the device. Was ZDI-CAN-23184

A heap buffer overflow in SANE Backends before 1.0.30 allows a malicious device connected to the same local network as the victim to execute arbitrary code, aka GHSL-2020-080.

D-Link DAP-1325 SetHostIPv6StaticSettings StaticDNS2 Stack-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DAP-1325 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of XML data provided to the HNAP1 SOAP endpoint. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-18836.

In wlan firmware, there is a possible out of bounds write due to improper input validation. This could lead to remote escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. Patch ID: ALPS08360153 (for MT6XXX chipsets) / WCNCR00363530 (for MT79XX chipsets); Issue ID: MSV-979.

The Broadcom wl WiFi driver is vulnerable to a heap buffer overflow. By supplying a vendor information element with a data length larger than 32 bytes, a heap buffer overflow is triggered in wlc_wpa_sup_eapol. In the worst case scenario, by sending specially-crafted WiFi packets, a remote, unauthenticated attacker may be able to execute arbitrary code on a vulnerable system. More typically, this vulnerability will result in denial-of-service conditions.

The Broadcom wl WiFi driver is vulnerable to a heap buffer overflow. If the vendor information element data length is larger than 164 bytes, a heap buffer overflow is triggered in wlc_wpa_plumb_gtk. In the worst case scenario, by sending specially-crafted WiFi packets, a remote, unauthenticated attacker may be able to execute arbitrary code on a vulnerable system. More typically, this vulnerability will result in denial-of-service conditions.

In Modem, there is a possible out of bounds write due to a missing bounds check. This could lead to remote code execution, if a UE has connected to a rogue base station controlled by the attacker, with no additional execution privileges needed. User interaction is not needed for exploitation. Patch ID: MOLY00720348; Issue ID: MSV-2392.

Buffer overflow in usb device class. Zephyr versions >= v2.6.0 contain Heap-based Buffer Overflow (CWE-122). For more information, see https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-fm6v-8625-99jf

Heap out-of-bound write vulnerability in Exynos baseband prior to SMR Jun-2023 Release 1 allows remote attacker to execute arbitrary code.

D-Link DAP-2622 DDP Configuration Backup Server Address Stack-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DAP-2622 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the DDP service. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. . Was ZDI-CAN-20067.

A flaw that allowed an attacker to corrupt memory and possibly escalate privileges was found in the mwifiex kernel module while connecting to a malicious wireless network.

TP-Link Omada ER605 DHCPv6 Client Options Stack-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of TP-Link Omada ER605 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of DHCP options. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-22420.

Certain NETGEAR devices are affected by a stack-based buffer overflow by an unauthenticated attacker. This affects D3600 before 1.0.0.75, D6000 before 1.0.0.75, D6200 before 1.1.00.32, D7000 before 1.0.1.68, JR6150 before 1.0.1.18, PR2000 before 1.0.0.28, R6020 before 1.0.0.38, R6050 before 1.0.1.18, R6080 before 1.0.0.38, R6120 before 1.0.0.46, R6220 before 1.1.0.80, R6260 before 1.1.0.40, R6700v2 before 1.2.0.36, R6800 before 1.2.0.36, R6900v2 before 1.2.0.36, WNR2020 before 1.1.0.62, and XR500 before 2.3.2.32.

Certain NETGEAR devices are affected by a stack-based buffer overflow by an unauthenticated attacker. This affects D3600 before 1.0.0.76, D6000 before 1.0.0.76, D6200 before 1.1.00.32, D7000 before 1.0.1.68, JR6150 before 1.0.1.18, PR2000 before 1.0.0.28, R6020 before 1.0.0.38, R6050 before 1.0.1.18, R6080 before 1.0.0.38, R6120 before 1.0.0.46, R6220 before 1.1.0.80, R6260 before 1.1.0.40, R6700v2 before 1.2.0.36, R6800 before 1.2.0.36, R6900v2 before 1.2.0.36, WNR2020 before 1.1.0.62, and XR500 before 2.3.2.32.

An issue was discovered in Cypress (formerly Broadcom) WICED Studio 6.2 CYW20735B1 and CYW20819A1. As a Bluetooth Low Energy (BLE) packet is received, it is copied into a Heap (ThreadX Block) buffer. The buffer allocated in dhmulp_getRxBuffer is four bytes too small to hold the maximum of 255 bytes plus headers. It is possible to corrupt a pointer in the linked list holding the free buffers of the g_mm_BLEDeviceToHostPool Block pool. This pointer can be fully controlled by overflowing with 3 bytes of packet data and the first byte of the packet CRC checksum. The checksum can be freely chosen by adapting the packet data accordingly. An attacker might be able to allocate the overwritten address as a receive buffer resulting in a write-what-where condition. This is fixed in BT SDK2.4 and BT SDK2.45.

A vulnerability was found in WAVLINK WN530H4, WN530HG4 and WN572HG3 up to 20221028. It has been classified as critical. Affected is the function Goto_chidx of the file login.cgi of the component Front-End Authentication Page. The manipulation of the argument wlanUrl leads to stack-based buffer overflow. The attack can only be initiated within the local network. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

In l2c_lcc_proc_pdu of l2c_fcr.cc, there is a possible out of bounds write due to a missing bounds check. This could lead to remote escalation of privilege over Bluetooth with no additional execution privileges needed. User interaction is not needed for exploitation. Product: Android. Versions: Android-7.0 Android-7.1.1 Android-7.1.2 Android-8.0 Android-8.1 Android-9. Android ID: A-112321180.

Heap overflow in subsystem in Intel(R) CSME before versions 11.8.70, 11.11.70, 11.22.70, 12.0.45; Intel(R) TXE before versions 3.1.70 and 4.0.20 may allow an unauthenticated user to potentially enable escalation of privileges, information disclosure or denial of service via adjacent access.

A stack-based buffer overflow in Fortinet FortiWeb version 6.4.0, version 6.3.15 and below, 6.2.5 and below allows attacker to execute unauthorized code or commands via crafted HTTP requests

In HeadsetInterface::ClccResponse of btif_hf.cc, there is a possible out of bounds stack write due to a missing bounds check. This could lead to remote escalation of privilege via Bluetooth, if the recipient has enabled SIP calls with no additional execution privileges needed. User interaction is not needed for exploitation.

In multiple functions of gl_proc.c, there is a buffer overwrite due to a missing bounds check. This could lead to escalation of privileges in the kernel.

This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of NETGEAR R6260 1.1.0.78_1.0.1 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the setupwizard.cgi page. When parsing the SOAP_LOGIN_TOKEN environment variable, the process does not properly validate the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-14107.

In TdlsexRxFrameHandle of the MTK WLAN driver, there is a possible out of bounds write due to a missing bounds check. This could lead to remote escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation.

This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of NETGEAR R6260 1.1.0.78_1.0.1 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the setupwizard.cgi page. A crafted SOAP request can trigger an overflow of a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-13511.

NETGEAR R7000 1.0.11.116 devices have a heap-based Buffer Overflow that is exploitable from the local network without authentication. The vulnerability exists within the handling of an HTTP request. An attacker can leverage this to execute code as root. The problem is that a user-provided length value is trusted during a backup.cgi file upload. The attacker must add a \n before the Content-Length header.

NETGEAR RAX30 fing_dil Stack-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of NETGEAR RAX30 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within fing_dil service. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-19843.

D-Link G416 cfgsave Stack-Based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link G416 wireless routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the HTTP service listening on TCP port 80. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-21442.

Tenda i29 v1.0 V1.0.0.5 was discovered to contain a buffer overflow via the time parameter in the sysLogin function.

The vulnerability described by CVE-2023-0972 has been additionally discovered in Silicon Labs Z-Wave end devices. This vulnerability may allow an unauthenticated attacker within Z-Wave range to overflow a stack buffer, leading to arbitrary code execution.

A stack-based buffer overflow in dnsproxy in ConnMan before 1.39 could be used by network adjacent attackers to execute code.

D-Link G416 httpd API-AUTH Digest Processing Stack-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link G416 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the HTTP service listening on TCP port 80. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-21662.

In nci_snd_set_routing_cmd of nci_hmsgs.cc, there is a possible out of bounds write due to a missing bounds check. This could lead to remote (proximal/adjacent) code execution with no additional execution privileges needed. User interaction is not needed for exploitation.Product: AndroidVersions: Android-11 Android-12 Android-12L Android-13Android ID: A-264879662

Tenda M3 V1.0.0.12(4856) was discovered to contain a stack overflow via the function upgrade.

D-Link G416 httpd API-AUTH Timestamp Processing Stack-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link G416 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the HTTP service listening on TCP port 80. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-21663.

Certain NETGEAR devices are affected by a stack-based buffer overflow by an unauthenticated attacker. This affects D3600 before 1.0.0.76, D6000 before 1.0.0.76, D6200 before 1.1.00.32, D7000 before 1.0.1.68, JR6150 before 1.0.1.18, PR2000 before 1.0.0.28, R6020 before 1.0.0.38, R6050 before 1.0.1.18, R6080 before 1.0.0.38, R6120 before 1.0.0.46, R6220 before 1.1.0.80, R6260 before 1.1.0.40, R6700v2 before 1.2.0.36, R6800 before 1.2.0.36, R6900v2 before 1.2.0.36, WNR2020 before 1.1.0.62, and XR500 before 2.3.2.32.

Certain NETGEAR devices are affected by a stack-based buffer overflow by an unauthenticated attacker. This affects GS728TPPv2 before 6.0.0.48, GS728TPv2 before 6.0.0.48, GS750E before 1.0.1.4, GS752TPP before 6.0.0.48, and GS752TPv2 before 6.0.0.48.

In SDP_AddAttribute of sdp_db.cc, there is a possible out of bounds write due to an incorrect bounds check. This could lead to remote (proximal/adjacent) code execution with no additional execution privileges needed. User interaction is not needed for exploitation.

Ariel Harush and Roy Hodir from OTORIO have found a flaw in the AXIS A1001 when communicating over OSDP. A heap-based buffer overflow was found in the pacsiod process which is handling the OSDP communication allowing to write outside of the allocated buffer. By appending invalid data to an OSDP message it was possible to write data beyond the heap allocated buffer. The data written outside the buffer could be used to execute arbitrary code.  lease refer to the Axis security advisory for more information, mitigation and affected products and software versions.

Certain NETGEAR devices are affected by a stack-based buffer overflow by an unauthenticated attacker. This affects D3600 before 1.0.0.76, D6000 before 1.0.0.76, D6200 before 1.1.00.32, D7000 before 1.0.1.68, JR6150 before 1.0.1.18, PR2000 before 1.0.0.28, R6020 before 1.0.0.38, R6050 before 1.0.1.18, R6080 before 1.0.0.38, R6120 before 1.0.0.46, R6220 before 1.1.0.80, R6260 before 1.1.0.40, R6700v2 before 1.2.0.36, R6800 before 1.2.0.36, R6900v2 before 1.2.0.36, WNR2020 before 1.1.0.62, and XR500 before 2.3.2.32.

In Bluetooth, there is a possible out of bounds write due to a missing bounds check. This could lead to remote (proximal/adjacent) code execution with no additional execution privileges needed. User interaction is not needed for exploitation.

Certain NETGEAR devices are affected by a stack-based buffer overflow by an unauthenticated attacker. This affects D3600 before 1.0.0.75, D6000 before 1.0.0.75, D6200 before 1.1.00.32, D7000 before 1.0.1.68, DM200 before 1.0.0.58, JR6150 before 1.0.1.18, PR2000 before 1.0.0.28, R6020 before 1.0.0.38, R6050 before 1.0.1.18, R6080 before 1.0.0.38, R6120 before 1.0.0.46, R6220 before 1.1.0.80, R6260 before 1.1.0.40, R6700v2 before 1.2.0.36, R6800 before 1.2.0.36, R6900v2 before 1.2.0.36, WNR2020 before 1.1.0.62, and XR500 before 2.3.2.32.

A vulnerability was found in Tenda W3 1.0.0.3(2204). Affected by this issue is the function formSetCfm of the file /goform/setcfm of the component HTTP Handler. The manipulation of the argument funcpara1 results in stack-based buffer overflow. The attack can only be performed from the local network. The exploit has been made public and could be used.

Description: A vulnerability in SiLabs Z/IP Gateway 7.18.01 and earlier allows an unauthenticated attacker within Z-Wave range to overflow a stack buffer, leading to arbitrary code execution.