The web management interface of the device allows the administrator username and password to be set to blank values. Once applied, the device permits authentication with empty credentials over the web management interface and Telnet service. This effectively disables authentication across all critical management channels, allowing any network-adjacent attacker to gain full administrative control without credentials.

Weak Password Requirements in GitHub repository thorsten/phpmyfaq prior to 3.1.8.

An issue was discovered in Infiray IRAY-A8Z3 1.0.957. There is a blank root password for TELNET by default.

BF-OS version 3.x up to and including 3.83 do not enforce strong passwords which may allow a remote attacker to brute-force the device password.

IBM Robotic Process Automation 21.0.0, 21.0.1, and 21.0.2 does not require that users should have strong passwords by default, which makes it easier for attackers to compromise user accounts. IBM X-Force ID: 230634.

Mealie 1.0.0beta3 employs weak password requirements which allows attackers to potentially gain unauthorized access to the application via brute-force attacks.

A CWE-521: Weak Password Requirements vulnerability exists that could allow an attacker to gain control of the device when the attacker brute forces the password. Affected Products: C-Bus Network Automation Controller - LSS5500NAC (Versions prior to V1.10.0), Wiser for C-Bus Automation Controller - LSS5500SHAC (Versions prior to V1.10.0), Clipsal C-Bus Network Automation Controller - 5500NAC (Versions prior to V1.10.0), Clipsal Wiser for C-Bus Automation Controller - 5500SHAC (Versions prior to V1.10.0), SpaceLogic C-Bus Network Automation Controller - 5500NAC2 (Versions prior to V1.10.0), SpaceLogic C-Bus Application Controller - 5500AC2 (Versions prior to V1.10.0)

Weak Password Requirements in GitHub repository notrinos/notrinoserp prior to 0.7.

QaTraq 6.9.2 ships with administrative account credentials which are enabled in default installations and permit immediate login via the web application login page. Because the account provides administrative privileges in the default configuration, an attacker who can reach the login page can gain administrative access.

Baseon Lantronix MSS devices do not require a password for TELNET access.

HCL Aftermarket DPC is affected by Weak Password Policy vulnerability, which makes it easier for attackers to guess weak passwords or use brute-force techniques to gain unauthorized access to user accounts.

An issue was discovered on Thermo Fisher Ion Torrent OneTouch 2 INS1005527 devices. They run an SSH server accessible over the default port 22. The root account has a weak default password of ionadmin, and a password change policy for the root account is not enforced. Thus, an attacker with network connectivity can achieve root code execution. NOTE: This vulnerability only affects products that are no longer supported by the maintainer.

Iteris Vantage Velocity Field Unit 2.3.1 and 2.4.2 devices have two users that are not documented and are configured with weak passwords (User bluetooth, password bluetooth; User eclipse, password eclipse). Also, bluetooth is the root password.

In Moxa PT-7528 series firmware, Version 4.0 or lower, and PT-7828 series firmware, Version 3.9 or lower, the application utilizes weak password requirements, which may allow an attacker to gain unauthorized access.

In Moxa EDS-G516E Series firmware, Version 5.2 or lower, weak password requirements may allow an attacker to gain access using brute force.

Versions of the Official registry Docker images through 2.7.0 contain a blank password for the root user. Systems deployed using affected versions of the registry container may allow a remote attacker to achieve root access with a blank password.

Weak Password Requirements in GitHub repository kromitgmbh/titra prior to 0.78.1.

Askey AP5100W_Dual_SIG_1.01.097 and all prior versions use a weak password at the Operating System (rlx-linux) level. This allows an attacker to gain unauthorized access as an admin or root user to the device Operating System via Telnet or SSH.

The built-in web service for MOXA NPort IAW5000A-I/O firmware version 2.1 or lower does not require users to have strong passwords.

Weak default root user credentials allow remote attackers to easily obtain OS superuser privileges over the open TCP port for SSH.

An issue was discovered in AvertX Auto focus Night Vision HD Indoor/Outdoor IP Dome Camera HD838 and Night Vision HD Indoor/Outdoor Mini IP Bullet Camera HD438. They do not require users to change the default password for the admin account. They only show a pop-up window suggesting a change but there's no enforcement. An administrator can click Cancel and proceed to use the device without changing the password. Additionally, they disclose the default username within the login.js script. Since many attacks for IoT devices, including malware and exploits, are based on the usage of default credentials, it makes these cameras an easy target for malicious actors.

Cloudexplorer-lite is an open source cloud software stack. Weak passwords can be easily guessed and are an easy target for brute force attacks. This can lead to an authentication system failure and compromise system security. Versions of cloudexplorer-lite prior to 1.2.0 did not enforce strong passwords. This vulnerability has been fixed in version 1.2.0. Users are advised to upgrade. There are no known workarounds for this vulnerability.

There are no requirements for setting a complex password for PiiGAB M-Bus, which could contribute to a successful brute force attack if the password is inline with recommended password guidelines.

ECOA BAS controller uses weak set of default administrative credentials that can be easily guessed in remote password attacks and gain full control of the system.

Airangel HSMX Gateway devices through 5.2.04 have Weak SSH Credentials.

An issue was discovered on Moxa MGate MB3170 and MB3270 devices before 4.1, MB3280 and MB3480 devices before 3.1, MB3660 devices before 2.3, and MB3180 devices before 2.1. Insufficient password requirements for the MGate web application may allow an attacker to gain access by brute-forcing account passwords.

An issue was discovered on MOBOTIX S14 MX-V4.2.1.61 devices. /admin/access accepts a request to set the "aaaaa" password, considered insecure for some use cases, from a user.

Weak default password cause vulnerability in SonicWall Email Security appliance which leads to attacker gain access to appliance database. This vulnerability affected Email Security Appliance version 10.0.2 and earlier.

YMS VIS Pro is an information system for veterinary and food administration, veterinarians and farm. Due to a combination of improper method for system credentials generation and weak password policy, passwords can be easily guessed and enumerated through brute force attacks. Successful attacks can lead to unauthorised access and execution of operations based on assigned user permissions. This vulnerability affects VIS Pro in versions <= 3.3.0.6. This vulnerability has been mitigated by changes in authentication mechanisms and implementation of additional authentication layer and strong password policies.

RSA Archer, versions prior to 6.6 P2 (6.6.0.2), contain an improper authentication vulnerability. The vulnerability allows sysadmins to create user accounts with insufficient credentials. Unauthenticated attackers could gain unauthorized access to the system using those accounts.

IBM QRadar Network Packet Capture 7.3.0 - 7.3.3 Patch 1 and 7.4.0 GA does not require that users should have strong passwords by default, which makes it easier for attackers to compromise user accounts. IBM X-Force ID: 166803.

Trend Micro Mobile Security for Android (Consumer) versions 10.3.1 and below on Android 8.0+ has an issue in which an attacker could bypass the product's App Password Protection feature.

NeuVector 3.1 when configured to allow authentication via Active Directory, does not enforce non-empty passwords which allows an attacker with access to the Neuvector portal to authenticate as any valid LDAP user by providing a valid username and an empty password (provided that the active directory server has not been configured to reject empty passwords).

IBM Security Verify Governance 10.0.2 does not require that users should have strong passwords by default, which makes it easier for attackers to compromise user accounts.

Jfrog Artifactory uses default passwords (such as "password") for administrative accounts and does not require users to change them. This may allow unauthorized network-based attackers to completely compromise of Jfrog Artifactory. This issue affects Jfrog Artifactory versions prior to 6.17.0.

Weak Password Requirements in GitHub repository thorsten/phpmyfaq prior to 3.1.10.

An issue was discovered on Marbella KR8s Dashcam FF 2.0.8 devices. Once access is gained either by default, common, or cracked passwords, the video recordings (containing sensitive routes, conversations, and footage) are open for downloading by creating a socket to command port 7777, and then downloading video via port 7778 and audio via port 7779.

Victure RX1800 EN_V1.0.0_r12_110933 was discovered to utilize a weak default password which includes the last 8 digits of the Mac address.

Weak password requirements in OpenC3 COSMOS v6.0.0 allow attackers to bypass authentication via a brute force attack.

Vasion Print (formerly PrinterLogic) before Virtual Appliance Host 22.0.843 Application 20.0.1923 allows Weak Password Encryption / Encoding OVE-20230524-0007.

Weak password requirements issue exists in CHOCO TEI WATCHER mini (IB-MCT001) all versions. If this issue is exploited, a brute-force attack may allow an attacker unauthorized access and login.

I-doit pro 25 and below and I-doit open 25 and below employ weak password requirements for Administrator account creation. Attackers are able to easily guess users' passwords via a bruteforce attack.

Renato v0.17.0 employs weak password complexity requirements, allowing attackers to crack user passwords via brute-force attacks.

InHand Networks IR615 Router's Versions 2.3.0.r4724 and 2.3.0.r4870 does not enforce an efficient password policy. This may allow an attacker with obtained user credentials to enumerate passwords and impersonate other application users and perform operations on their behalf.

HCL AION  version 2 is affected by a Weak Password Policy vulnerability. This can  allow the use of easily guessable passwords, potentially resulting in unauthorized access

The TIBCO EBX Web Server component of TIBCO Software Inc.'s TIBCO EBX, TIBCO EBX, TIBCO EBX, and TIBCO Product and Service Catalog powered by TIBCO EBX contains a vulnerability that under certain specific conditions allows an attacker to enter a password other than the legitimate password and it will be accepted as valid. Affected releases are TIBCO Software Inc.'s TIBCO EBX: versions 5.8.123 and below, TIBCO EBX: versions 5.9.3, 5.9.4, 5.9.5, 5.9.6, 5.9.7, 5.9.8, 5.9.9, 5.9.10, 5.9.11, 5.9.12, 5.9.13, and 5.9.14, TIBCO EBX: versions 6.0.0 and 6.0.1, and TIBCO Product and Service Catalog powered by TIBCO EBX: version 1.0.0.

In Gradle Enterprise before 2023.1, a remote attacker may be able to gain access to a new installation (in certain installation scenarios) because of a non-unique initial system user password. Although this password must be changed upon the first login, it is possible that an attacker logs in before the legitimate administrator logs in.

HCL Compass is vulnerable to insecure password requirements. An attacker could easily guess the password and gain access to user accounts.

The Epson "EasyMP" software is designed to remotely stream a users computer to supporting projectors.These devices are authenticated using a unique 4-digit code, displayed on-screen - ensuring only those who can view it are streaming.All Epson projectors supporting the "EasyMP" software are vulnerable to a brute-force vulnerability, allowing any attacker on the network to remotely control and stream to the vulnerable device

IBM Tivoli Endpoint Manager (IBM BigFix 9.2 and 9.5) does not require that users should have strong passwords by default, which makes it easier for attackers to compromise user accounts. IBM X-Force ID: 123861.