In CentOS-WebPanel.com (aka CWP) CentOS Web Panel 0.9.8.848, the Login process allows attackers to check whether a username is valid by comparing response times.

Dropbear 2011.54 through 2018.76 has an inconsistent failure delay that may lead to revealing valid usernames, a different issue than CVE-2018-15599.

An issue was discovered in ConnectWise Control (formerly known as ScreenConnect) 19.3.25270.7185. There is a user enumeration vulnerability, allowing an unauthenticated attacker to determine with certainty if an account exists for a given username.

The Change WP Admin Login WordPress plugin before 1.1.4 discloses the URL of the hidden login page when accessing a crafted URL, bypassing the protection offered.

The Reset Password feature in Pagekit 1.0.17 gives a different response depending on whether the e-mail address of a valid user account is entered, which might make it easier for attackers to enumerate accounts.

SPIP before 3.1.11 and 3.2 before 3.2.5 provides different error messages from the password-reminder page depending on whether an e-mail address exists, which might help attackers to enumerate subscribers.

Computrols CBAS 18.0.0 allows Username Enumeration.

Zabbix through 4.4.0alpha1 allows User Enumeration. With login requests, it is possible to enumerate application usernames based on the variability of server responses (e.g., the "Login name or password is incorrect" and "No permissions for system access" messages, or just blocking for a number of seconds). This affects both api_jsonrpc.php and index.php.

IBM GSKit could allow a remote attacker to obtain sensitive information, caused by a timing-based side channel in the RSA Decryption implementation. By sending an overly large number of trial messages for decryption, an attacker could exploit this vulnerability to obtain sensitive information. IBM X-Force ID: 255828.

An Information Exposure issue (issue 2 of 2) was discovered in GitLab Community and Enterprise Edition before 11.7.8, 11.8.x before 11.8.4, and 11.9.x before 11.9.2. During the OAuth authentication process, the application attempts to validate a parameter in an insecure way, potentially exposing data.

Pterodactyl before 0.7.14 with 2FA allows credential sniffing.

SENAYAN Library Management System (SLiMS) Bulian v9.5.2 does not strip exif data from uploaded images. This allows attackers to obtain information such as the user's geolocation and device information.

On Coldcard MK1 and MK2 devices, a side channel for the row-based OLED display was found. The power consumption of each row-based display cycle depends on the number of illuminated pixels, allowing a partial recovery of display contents. For example, a hardware implant in the USB cable might be able to leverage this behavior to recover confidential secrets such as the PIN and BIP39 mnemonic. In other words, the side channel is relevant only if the attacker has enough control over the device's USB connection to make power-consumption measurements at a time when secret data is displayed. The side channel is not relevant in other circumstances, such as a stolen device that is not currently displaying secret data. On Coldcard MK1 and MK2 devices, a side channel for the row-based OLED display was found. The power consumption of each row-based display cycle depends on the number of illuminated pixels, allowing a partial recovery of display contents. For example, a hardware implant in the USB cable might be able to leverage this behavior to recover confidential secrets such as the PIN and BIP39 mnemonic. In other words, the side channel is relevant only if the attacker has enough control over the device's USB connection to make power-consumption measurements at a time when secret data is displayed. The side channel is not relevant in other circumstances, such as a stolen device that is not currently displaying secret data. NOTE: At Coinkite, we’ve already mitigated it, even though we feel strongly that it is not a legitimate issue. In our opinion, it is both unproven (might not even work) and also completely impractical—even if it could be made to work perfectly

IBM Spectrum Virtualize 8.5, under certain circumstances, could disclose sensitive credential information while a download from Fix Central is in progress. IBM X-Force ID: 249518.

The sensitive information exposure vulnerability in the CGI “Export_Log” and the binary “zcmd” in Zyxel DX5401-B0 firmware versions prior to V5.17(ABYO.1)C0 could allow a remote unauthenticated attacker to read the system files and to retrieve the password of the supervisor from the encrypted file.

InHand Networks IR615 Router's Versions 2.3.0.r4724 and 2.3.0.r4870 authentication process response indicates and validates the existence of a username. This may allow an attacker to enumerate different user accounts.

io.finnet tss-lib before 2.0.0 can leak the lambda value of a private key via a timing side-channel attack because it relies on Go big.Int, which is not constant time for Cmp, modular exponentiation, or modular inverse. An example leak is in crypto/paillier/paillier.go. (bnb-chain/tss-lib and thorchain/tss are also affected.)

CyberArk Identity 21.5.131, when handling an invalid authentication attempt, sometimes reveals whether the username is valid. In certain authentication policy configurations with MFA, the API response length can be used to differentiate between a valid user and an invalid one (aka Username Enumeration). Response differentiation enables attackers to enumerate usernames of valid application users. Attackers can use this information to leverage brute-force and dictionary attacks in order to discover valid account information such as passwords.

Versions before 8.9.1, Various resources in Jira responded with a 404 instead of redirecting unauthenticated users to the login page, in some situations this may have allowed unauthorised attackers to determine if certain resources exist or not through an Information Disclosure vulnerability.

In CentOS-WebPanel.com (aka CWP) CentOS Web Panel 0.9.8.846, the Login process allows attackers to check whether a username is valid by reading the HTTP response.

Redmine before 4.0.9 and 4.1.x before 4.1.3 allows an attacker to learn the values of internal authentication keys by observing timing differences in string comparison operations within SysController and MailHandlerController.

IBM Guardium Data Encryption (GDE) 5.0.0.2 behaves differently or sends different responses under different circumstances in a way that is observable to an unauthorized actor, which could facilitate username enumeration. IBM X-Force ID: 213856.

An issue was discovered in Arm Mbed TLS before 2.23.0. A side channel allows recovery of an ECC private key, related to mbedtls_ecp_check_pub_priv, mbedtls_pk_parse_key, mbedtls_pk_parse_keyfile, mbedtls_ecp_mul, and mbedtls_ecp_mul_restartable.

An issue was discovered in Arm Mbed TLS before 2.23.0. Because of a side channel in modular exponentiation, an RSA private key used in a secure enclave could be disclosed.

The Poll Maker WordPress plugin before 3.4.2 allows unauthenticated users to perform SQL injection via the ays_finish_poll AJAX action. While the result is not disclosed in the response, it is possible to use a timing attack to exfiltrate data such as password hash.

An information leak in Nabu Casa Home Assistant Operating System and Home Assistant Supervised 2022.03 allows a DNS operator to gain knowledge about internal network resources via the hardcoded DNS resolver configuration.

An issue was discovered in MediaWiki before 1.35.1. Missing users (accounts that don't exist) and hidden users (accounts that have been explicitly hidden due to being abusive, or similar) that the viewer cannot see are handled differently, exposing sensitive information about the hidden status to unprivileged viewers. This exists on various code paths.

When binding against a DN during authentication, the reply from 389-ds-base will be different whether the DN exists or not. This can be used by an unauthenticated attacker to check the existence of an entry in the LDAP database.

CA Technologies Identity Governance 12.6, 14.0, 14.1, and 14.2 and CA Identity Suite Virtual Appliance 14.0, 14.1, and 14.2 provide telling error messages that may allow remote attackers to enumerate account names.

The AES instructions on the ARMv8 platform do not have an algorithm that is "intrinsically resistant" to side-channel attacks. NOTE: the vendor reportedly offers the position "while power side channel attacks ... are possible, they are not directly caused by or related to the Arm architecture."

The RSA and DSA decryption code in Nettle makes it easier for attackers to discover private keys via a cache side channel attack.

TP-Link routers, Archer C5 and WR710N-V1, using the latest software, the strcmp function used for checking credentials in httpd, is susceptible to a side-channel attack. By measuring the response time of the httpd process, an attacker could guess each byte of the username and password.

An issue was discovered in UTI Mutual fund Android application 5.4.18 and prior, allows attackers to brute force enumeration of usernames determined by the error message returned after invalid credentials are attempted.

An issue was discovered in LIVEBOX Collaboration vDesk through v031. An Observable Response Discrepancy can occur under the /api/v1/vdeskintegration/user/isenableuser endpoint, the /api/v1/sharedsearch?search={NAME]+{SURNAME] endpoint, and the /login endpoint. The web application provides different responses to incoming requests in a way that reveals internal state information to an unauthorized actor outside of the intended control sphere.

An issue was discovered in the SecurePoll extension for MediaWiki through 1.35.1. The non-admin vote list contains a full vote timestamp, which may provide unintended clues about how a voting process unfolded.

The Clerk WordPress plugin before 4.0.0 is affected by time-based attacks in the validation function for all API requests due to the usage of comparison operators to verify API keys against the ones stored in the site options.

String::Compare::ConstantTime for Perl through 0.321 is vulnerable to timing attacks that allow an attacker to guess the length of a secret string. As stated in the documentation: "If the lengths of the strings are different, because equals returns false right away the size of the secret string may be leaked (but not its contents)." This is similar to CVE-2020-36829

The Page Restriction WordPress (WP) – Protect WP Pages/Post plugin for WordPress is vulnerable to Sensitive Information Exposure in all versions up to, and including, 1.3.6 via the WordPress core search feature. This makes it possible for unauthenticated attackers to extract sensitive data from posts that have been restricted to higher-level roles such as administrator.

HumHub Social Network Kit Enterprise v1.3.13 allows remote attackers to find the user accounts existing on any Social Network Kits (including self-hosted ones) by brute-forcing the username after the /u/ initial URI substring, aka Response Discrepancy Information Exposure.

In NocoDB, versions 0.9 to 0.83.8 are vulnerable to Observable Discrepancy in the password-reset feature. When requesting a password reset for a given email address, the application displays an error message when the email isn't registered within the system. This allows attackers to enumerate the registered users' email addresses.

Flask-AppBuilder is an application development framework, built on top of the Flask web framework. In affected versions there exists a user enumeration vulnerability. This vulnerability allows for a non authenticated user to enumerate existing accounts by timing the response time from the server when you are logging in. Users are advised to upgrade to version 3.4.4 as soon as possible. There are no known workarounds for this issue.

mailboxd in Zimbra Collaboration Suite 8.8 before 8.8.8; 8.7 before 8.7.11.Patch3; and 8.6 allows Account Enumeration by leveraging a Discrepancy between the "HTTP 404 - account is not active" and "HTTP 401 - must authenticate" errors.

A vulnerability in Cisco Unified Communications Manager (Unified CM), Cisco Unified Communications Manager Session Management Edition (Unified CM SME), and Cisco Unity Connection could allow an unauthenticated, remote attacker to perform a timing attack. This vulnerability is due to insufficient protection of a system password. An attacker could exploit this vulnerability by observing the time it takes the system to respond to various queries. A successful exploit could allow the attacker to determine a sensitive system password.

A vulnerability in the RADIUS authentication module of Cisco Policy Suite could allow an unauthenticated, remote attacker to determine whether a subscriber username is valid. The vulnerability occurs because the Cisco Policy Suite RADIUS server component returns different authentication failure messages based on the validity of usernames. An attacker could use these messages to determine whether a valid subscriber username has been identified. The attacker could use this information in subsequent attacks against the system. Cisco Bug IDs: CSCvg47830.

An email address enumeration vulnerability exists in the password reset function of Rocket.Chat through 3.9.1.

Jetty through 9.4.x is prone to a timing channel in util/security/Password.java, which makes it easier for remote attackers to obtain access by observing elapsed times before rejection of incorrect passwords.

The firewall in Astaro Security Linux before 4.024 sends responses to SYN-FIN packets, which makes it easier for remote attackers to obtain information about the system and construct specialized attacks.

The MediaError message property should be consistent to avoid leaking information about cross-origin resources; however for a same-site cross-origin resource, the message could have leaked information enabling XS-Leaks attacks. This vulnerability affects Firefox < 102.

AIX 4.3.3 through AIX 5.1, when direct remote login is disabled, displays a different message if the password is correct, which allows remote attackers to guess the password via brute force methods.

Fixed in v1.5.1, Argo version v1.5.0 was vulnerable to a user-enumeration vulnerability which allowed attackers to determine the usernames of valid (non-SSO) accounts because /api/v1/session returned 401 for an existing username and 404 otherwise.