An issue was discovered in Couchbase Sync Gateway 3.x before 3.0.2. Admin credentials are not verified when using X.509 client-certificate authentication from Sync Gateway to Couchbase Server. When Sync Gateway is configured to authenticate with Couchbase Server using X.509 client certificates, the admin credentials provided to the Admin REST API are ignored, resulting in privilege escalation for unauthenticated users. The Public REST API is not impacted by this issue. A workaround is to replace X.509 certificate based authentication with Username and Password authentication inside the bootstrap configuration.

Improper certificate validation for certain connections in the Bosch Smart Home System App for iOS prior to version 9.17.1 potentially allows to intercept video contents by performing a man-in-the-middle attack.

There is a vulnerability in the AP Certificate Management Service which could allow a threat actor to execute an unauthenticated RCE attack. Successful exploitation could allow an attacker to execute arbitrary commands on the underlying operating system leading to complete system compromise.

An issue was discovered on Alecto IVM-100 2019-11-12 devices. The device uses a custom UDP protocol to start and control video and audio services. The protocol has been partially reverse engineered. Based upon the reverse engineering, no password or username is ever transferred over this protocol. Thus, one can set up the camera connection feed with only the encoded UID. It is possible to set up sessions with the camera over the Internet by using the encoded UID and the custom UDP protocol, because authentication happens at the client side.

An improper certificate validation issue in Smartcard authentication in GitLab EE affecting all versions from 11.6 prior to 16.4.4, 16.5 prior to 16.5.4, and 16.6 prior to 16.6.2 allows an attacker to authenticate as another user given their public key if they use Smartcard authentication. Smartcard authentication is an experimental feature and has to be manually enabled by an administrator.

A vulnerability has been discovered in Bitdefender Total Security HTTPS scanning functionality that results in the improper trust of certificates issued using the DSA signature algorithm. The product does not properly check the certificate chain, allowing an attacker to establish MITM SSL connections to arbitrary sites using a DSA-signed certificate.

A vulnerability has been discovered in Bitdefender Total Security HTTPS scanning functionality that results in the improper trust of self-signed certificates. The product is found to trust certificates signed with the RIPEMD-160 hashing algorithm without proper validation, allowing an attacker to establish MITM SSL connections to arbitrary sites.

Barco ClickShare Button R9861500D01 devices before 1.9.0 have Improper Following of a Certificate's Chain of Trust. The embedded 'dongle_bridge' program used to expose the functionalities of the ClickShare Button to a USB host, does not properly validate the whole certificate chain.

European Commission eIDAS-Node Integration Package before 2.3.1 has Missing Certificate Validation because a certain ExplicitKeyTrustEvaluator return value is not checked. NOTE: only 2.1 is confirmed to be affected.

European Commission eIDAS-Node Integration Package before 2.3.1 allows Certificate Faking because an attacker can sign a manipulated SAML response with a forged certificate.

Lack of TLS certificate verification in log transmission of a financial module within LINE Client for iOS prior to 13.16.0.

Android App 'MyPallete' and some of the Android banking applications based on 'MyPallete' do not verify X.509 certificates from servers, and also do not properly validate certificates with host-mismatch, which allows man-in-the-middle attackers to spoof servers and obtain sensitive information via a crafted certificate.

A vulnerability in the Cisco Network Plug-and-Play (PnP) agent of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to gain unauthorized access to sensitive data. The vulnerability exists because the affected software insufficiently validates certificates. An attacker could exploit this vulnerability by supplying a crafted certificate to an affected device. A successful exploit could allow the attacker to conduct man-in-the-middle attacks to decrypt and modify confidential information on user connections to the affected software.

Ylianst MeshCentral 1.1.16 is vulnerable to Missing SSL Certificate Validation.

A vulnerability in the certificate handling component of the Cisco SPA112, SPA525, and SPA5X5 Series IP Phones could allow an unauthenticated, remote attacker to listen to or control some aspects of a Transport Level Security (TLS)-encrypted Session Initiation Protocol (SIP) conversation. The vulnerability is due to the improper validation of server certificates. An attacker could exploit this vulnerability by crafting a malicious server certificate to present to the client. An exploit could allow an attacker to eavesdrop on TLS-encrypted traffic and potentially route or redirect calls initiated by an affected device. Affected software include version 7.6.2 of the Cisco Small Business SPA525 Series IP Phones and Cisco Small Business SPA5X5 Series IP Phones and version 1.4.2 of the Cisco Small Business SPA500 Series IP Phones and Cisco Small Business SPA112 Series IP Phones.

A vulnerability was discovered in Veritas NetBackup Snapshot Manager before 10.2.0.1 that allowed untrusted clients to interact with the RabbitMQ service. This was caused by improper validation of the client certificate due to misconfiguration of the RabbitMQ service. Exploiting this impacts the confidentiality and integrity of messages controlling the backup and restore jobs, and could result in the service becoming unavailable. This impacts only the jobs controlling the backup and restore activities, and does not allow access to (or deletion of) the backup snapshot data itself. This vulnerability is confined to the NetBackup Snapshot Manager feature and does not impact the RabbitMQ instance on the NetBackup primary servers.

The Twitter Kit framework through 3.4.2 for iOS does not properly validate the api.twitter.com SSL certificate. Although the certificate chain must contain one of a set of pinned certificates, there are certain implementation errors such as a lack of hostname verification. NOTE: this is an end-of-life product.

A vulnerability was found in keycloak 7.x, when keycloak is configured with LDAP user federation and StartTLS is used instead of SSL/TLS from the LDAP server (ldaps), in this case user authentication succeeds even if invalid password has entered.

A flaw was found in the "Leaf and Chain" OCSP policy implementation in JSS' CryptoManager versions after 4.4.6, 4.5.3, 4.6.0, where it implicitly trusted the root certificate of a certificate chain. Applications using this policy may not properly verify the chain and could be vulnerable to attacks such as Man in the Middle.

A vulnerability, in The ReportsTrustManager class of Brocade SANnav versions before v2.0, could allow an attacker to perform a man-in-the-middle attack against Secure Sockets Layer(SSL)connections.

e2guardian v5.4.x <= v5.4.3r is affected by missing SSL certificate validation in the SSL MITM engine. In standalone mode (i.e., acting as a proxy or a transparent proxy), with SSL MITM enabled, e2guardian, if built with OpenSSL v1.1.x, did not validate hostnames in certificates of the web servers that it connected to, and thus was itself vulnerable to MITM attacks.

Missing SSL certificate validation in localstack v2.3.2 allows attackers to eavesdrop on communications between the host and server via a man-in-the-middle attack.

A vulnerability has been identified in SINEC INS (All versions < V1.0 SP2 Update 2). Affected products do not properly validate the certificate of the configured UMC server. This could allow an attacker to intercept credentials that are sent to the UMC server as well as to manipulate responses, potentially allowing an attacker to escalate privileges.

Codehaus XFire 1.2.6 and earlier, as used in the Amazon EC2 API Tools Java library and other products, does not verify that the server hostname matches a domain name in the subject's Common Name (CN) or subjectAltName field of the X.509 certificate, which allows man-in-the-middle attackers to spoof SSL servers via an arbitrary valid certificate.

Missing SSL certificate validation in HTTPie v3.2.2 allows attackers to eavesdrop on communications between the host and server via a man-in-the-middle attack.

In versions 15.0.0-15.1.0.1, 14.1.0-14.1.2.3, 13.1.0-13.1.3.4, 12.1.0-12.1.5.1, and 11.6.1-11.6.5.2, the BIG-IP Client or Server SSL profile ignores revoked certificates, even when a valid CRL is present. This impacts SSL/TLS connections and may result in a man-in-the-middle attack on the connections.

An issue was discovered in ASUSTOR exFAT Driver through 1.0.0.r20. When conducting license validation, exfat.cgi and exfatctl accept any certificate for asustornasapi.asustor.com. In other words, there is Missing SSL Certificate Validation.

When TLS is enabled with ssl-endpoint-identification-enabled set to true, Apache Geode fails to perform hostname verification of the entries in the certificate SAN during the SSL handshake. This could compromise intra-cluster communication using a man-in-the-middle attack.

IBM Security Verify Access 10.0.0.0 through 10.0.6.1 uses insecure calls that could allow an attacker on the network to take control of the server. IBM X-Force ID: 254977.

The kantan netprint App for Android 2.0.3 and earlier does not verify X.509 certificates from servers, which allows man-in-the-middle attackers to spoof servers and obtain sensitive information via a crafted certificate.

A vulnerability has been identified in Bitdefender Total Security HTTPS scanning functionality where the software trusts a certificate issued by an entity that isn't authorized to issue certificates. This occurs when the "Basic Constraints" extension in the certificate indicates that it is meant to be an "End Entity”. This flaw could allow an attacker to perform a Man-in-the-Middle (MITM) attack, intercepting and potentially altering communications between the user and the website.

A vulnerability has been identified in SINUMERIK Edge (All versions < V3.2). The affected software does not properly validate the server certificate when initiating a TLS connection. This could allow an attacker to spoof a trusted entity by interfering in the communication path between the client and the intended server.

The kantan netprint App for iOS 2.0.2 and earlier does not verify X.509 certificates from servers, which allows man-in-the-middle attackers to spoof servers and obtain sensitive information via a crafted certificate.

An improper certificate validation vulnerability [CWE-295] in FortiADC 7.4.0, 7.2.0 through 7.2.3, 7.1 all versions, 7.0 all versions, 6.2 all versions, 6.1 all versions and 6.0 all versions may allow a remote and unauthenticated attacker to perform a Man-in-the-Middle attack on the communication channel between the device and various remote servers such as private SDN connectors and FortiToken Cloud.

An authentication bypass in Optoma 1080PSTX C02 allows an attacker to access the administration console without valid credentials.

The netprint App for iOS 3.2.3 and earlier does not verify X.509 certificates from servers, which allows man-in-the-middle attackers to spoof servers and obtain sensitive information via a crafted certificate.

A vulnerability has been identified in Bitdefender Total Security HTTPS scanning functionality where the software fails to properly validate website certificates. Specifically, if a site certificate lacks the "Server Authentication" specification in the Extended Key Usage extension, the product does not verify the certificate's compliance with the site, deeming such certificates as valid. This flaw could allow an attacker to perform a Man-in-the-Middle (MITM) attack, intercepting and potentially altering communications between the user and the website.

strongSwan 5.9.8 and 5.9.9 potentially allows remote code execution because it uses a variable named "public" for two different purposes within the same function. There is initially incorrect access control, later followed by an expired pointer dereference. One attack vector is sending an untrusted client certificate during EAP-TLS. A server is affected only if it loads plugins that implement TLS-based EAP methods (EAP-TLS, EAP-TTLS, EAP-PEAP, or EAP-TNC). This is fixed in 5.9.10.

Traefik is an HTTP reverse proxy and load balancer. Prior to version 2.6.1, Traefik skips the router transport layer security (TLS) configuration when the host header is a fully qualified domain name (FQDN). For a request, the TLS configuration choice can be different than the router choice, which implies the use of a wrong TLS configuration. When sending a request using FQDN handled by a router configured with a dedicated TLS configuration, the TLS configuration falls back to the default configuration that might not correspond to the configured one. If the CNAME flattening is enabled, the selected TLS configuration is the SNI one and the routing uses the CNAME value, so this can skip the expected TLS configuration. Version 2.6.1 contains a patch for this issue. As a workaround, one may add the FDQN to the host rule. However, there is no workaround if the CNAME flattening is enabled.

Improper handling and storage of certificates in CP Plus CP-VNR-3104 B3223P22C02424 allow attackers to decrypt communications or execute a man-in-the-middle attacks.

An issue was discovered in TCPDF before 6.8.0. If libcurl is used, CURLOPT_SSL_VERIFYHOST and CURLOPT_SSL_VERIFYPEER are set unsafely.

ALPACA is an application layer protocol content confusion attack, exploiting TLS servers implementing different protocols but using compatible certificates, such as multi-domain or wildcard certificates. A MiTM attacker having access to victim's traffic at the TCP/IP layer can redirect traffic from one subdomain to another, resulting in a valid TLS session. This breaks the authentication of TLS and cross-protocol attacks may be possible where the behavior of one protocol service may compromise the other at the application layer.

If a user visited a webpage with an invalid TLS certificate, and granted an exception, the webpage was able to provide a WebAuthn challenge that the user would be prompted to complete. This is in violation of the WebAuthN spec which requires "a secure transport established without errors". This vulnerability affects Firefox < 140 and Thunderbird < 140.

An improper certificate validation vulnerability exists in the BIG-IP Edge Client for Windows and macOS and may allow an attacker to impersonate a BIG-IP APM system.  Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.

F5 Access for Android before version 3.1.2 which uses HTTPS does not verify the remote endpoint identity. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.

Pexip Infinity Connect before 1.8.0 mishandles TLS certificate validation. The allow list is not properly checked.

systemd 239 through 245 accepts any certificate signed by a trusted certificate authority for DNS Over TLS. Server Name Indication (SNI) is not sent, and there is no hostname validation with the GnuTLS backend. NOTE: This has been disputed by the developer as not a vulnerability since hostname validation does not have anything to do with this issue (i.e. there is no hostname to be sent)

A vulnerability exists in the component RTU500 Scripting interface. When a client connects to a server using TLS, the server presents a certificate. This certificate links a public key to the identity of the service and is signed by a Certification Authority (CA), allowing the client to validate that the remote service can be trusted and is not malicious. If the client does not validate the parameters of the certificate, then attackers could be able to spoof the identity of the service. An attacker could exploit the vulnerability by using faking the identity of a RTU500 device and intercepting the messages initiated via the RTU500 Scripting interface.

A vulnerability in the Cisco SD-WAN Solution could allow an unauthenticated, remote attacker to bypass certificate validation on an affected device. The vulnerability is due to improper certificate validation. An attacker could exploit this vulnerability by supplying a system image signed with a crafted certificate to an affected device, bypassing the certificate validation. An exploit could allow an attacker to deploy a crafted system image.

Nanoleaf firmware v7.1.1 and below is missing TLS verification, allowing attackers to execute arbitrary code via a DNS hijacking attack.