An issue was discovered on D-Link DIR-850L 1.21WW devices. A partially completed WPA handshake is sufficient for obtaining full access to the wireless network. A client can access the network by sending packets on Data Frames to the AP without encryption.

FreeSWITCH is a Software Defined Telecom Stack enabling the digital transformation from proprietary telecom switches to a software implementation that runs on any commodity hardware. Prior to version 1.10.7, FreeSWITCH does not authenticate SIP MESSAGE requests, leading to spam and message spoofing. By default, SIP requests of the type MESSAGE (RFC 3428) are not authenticated in the affected versions of FreeSWITCH. MESSAGE requests are relayed to SIP user agents registered with the FreeSWITCH server without requiring any authentication. Although this behaviour can be changed by setting the `auth-messages` parameter to `true`, it is not the default setting. Abuse of this security issue allows attackers to send SIP MESSAGE messages to any SIP user agent that is registered with the server without requiring authentication. Additionally, since no authentication is required, chat messages can be spoofed to appear to come from trusted entities. Therefore, abuse can lead to spam and enable social engineering, phishing and similar attacks. This issue is patched in version 1.10.7. Maintainers recommend that this SIP message type is authenticated by default so that FreeSWITCH administrators do not need to be explicitly set the `auth-messages` parameter. When following such a recommendation, a new parameter can be introduced to explicitly disable authentication.

In JetBrains TeamCity before 2021.1.1, insufficient authentication checks for agent requests were made.

An issue was discovered in Midnight Commander through 4.8.26. When establishing an SFTP connection, the fingerprint of the server is neither checked nor displayed. As a result, a user connects to the server without the ability to verify its authenticity.

A vulnerability has been identified in SIMATIC S7-1200 CPU family (incl. SIPLUS variants) (V4.5.0). Affected devices fail to authenticate against configured passwords when provisioned using TIA Portal V13. This could allow an attacker using TIA Portal V13 or later versions to bypass authentication and download arbitrary programs to the PLC. The vulnerability does not occur when TIA Portal V13 SP1 or any later version was used to provision the device.

An issue was discovered in Dropbear through 2020.81. Due to a non-RFC-compliant check of the available authentication methods in the client-side SSH code, it is possible for an SSH server to change the login process in its favor. This attack can bypass additional security measures such as FIDO2 tokens or SSH-Askpass. Thus, it allows an attacker to abuse a forwarded agent for logging on to another server unnoticed.

Dell PowerScale OneFS, versions 8.2.2-9.3.0.x, contain an authentication bypass by primary weakness in one of the authentication factors. A remote unauthenticated attacker may potentially exploit this vulnerability and bypass one of the factors of authentication.

The OAuth client Single Sign On WordPress plugin before 3.0.4 does not have authorisation and CSRF when updating its settings, which could allow unauthenticated attackers to update them and change the OAuth endpoints to ones they controls, allowing them to then be authenticated as admin if they know the correct email address

HashiCorp Vault Enterprise 1.6.0 & 1.6.1 allowed the `remove-peer` raft operator command to be executed against DR secondaries without authentication. Fixed in 1.6.2.

Tovy is a a staff management system for Roblox groups. A vulnerability in versions prior to 0.7.51 allows users to log in as other users, including privileged users such as the other of the instance. The problem has been patched in version 0.7.51.

Jervis is a library for Job DSL plugin scripts and shared Jenkins pipeline libraries. Prior to 2.2, AES/CBC/PKCS5Padding lacks authentication, making it vulnerable to padding oracle attacks and ciphertext manipulation. This vulnerability is fixed in 2.2.

The OpenID Single Sign-On authentication functionality in OXID eShop before 4.5.0 allows remote attackers to impersonate users via the email address in a crafted authentication token.

Parse Server is an open source backend that can be deployed to any infrastructure that can run Node.js. Prior to versions 4.10.11 and 5.2.2, the certificate in the Parse Server Apple Game Center auth adapter not validated. As a result, authentication could potentially be bypassed by making a fake certificate accessible via certain Apple domains and providing the URL to that certificate in an authData object. Versions 4.0.11 and 5.2.2 prevent this by introducing a new `rootCertificateUrl` property to the Parse Server Apple Game Center auth adapter which takes the URL to the root certificate of Apple's Game Center authentication certificate. If no value is set, the `rootCertificateUrl` property defaults to the URL of the current root certificate as of May 27, 2022. Keep in mind that the root certificate can change at any time and that it is the developer's responsibility to keep the root certificate URL up-to-date when using the Parse Server Apple Game Center auth adapter. There are no known workarounds for this issue.

lib/crypto/c_src/crypto_drv.c in erlang does not properly check the return value from the OpenSSL DSA_do_verify function, which might allow remote attackers to bypass validation of the certificate chain via a malformed SSL/TLS signature, a similar vulnerability to CVE-2008-5077. NOTE: a package maintainer disputes this issue, reporting that there is a proper check within the only code that uses the applicable part of crypto_drv.c, and thus "this report is invalid.

An issue was discovered in MISP before 2.4.158. In UsersController.php, password confirmation can be bypassed via vectors involving an "Accept: application/json" header.

Memos is a privacy-first, lightweight note-taking service that uses Access Tokens to authenticate application access. When a user changes their password, the existing list of Access Tokens stay valid instead of expiring. If a user finds that their account has been compromised, they can update their password. In versions up to and including 0.18.1, though, the bad actor will still have access to their account because the bad actor's Access Token stays on the list as a valid token. The user will have to manually delete the bad actor's Access Token to secure their account. The list of Access Tokens has a generic Description which makes it hard to pinpoint a bad actor in a list of Access Tokens. A known patched version of Memos isn't available. To improve Memos security, all Access Tokens will need to be revoked when a user changes their password. This removes the session for all the user's devices and prompts the user to log in again. One can treat the old Access Tokens as "invalid" because those Access Tokens were created with the older password.

Browsing the admin.html page allows the user to reset the admin password. Also appears in the JS code for the password.

OPC UA .NET Standard Stack allows a remote attacker to bypass the application authentication check via crafted fake credentials.

matrix-android-sdk2 is the Matrix SDK for Android. Prior to version 1.5.1, an attacker cooperating with a malicious homeserver can construct messages that legitimately appear to have come from another person, without any indication such as a grey shield. Additionally, a sophisticated attacker cooperating with a malicious homeserver could employ this vulnerability to perform a targeted attack in order to send fake to-device messages appearing to originate from another user. This can allow, for example, to inject the key backup secret during a self-verification, to make a targeted device start using a malicious key backup spoofed by the homeserver. matrix-android-sdk2 would then additionally sign such a key backup with its device key, spilling trust over to other devices trusting the matrix-android-sdk2 device. These attacks are possible due to a protocol confusion vulnerability that accepts to-device messages encrypted with Megolm instead of Olm. matrix-android-sdk2 version 1.5.1 has been modified to only accept Olm-encrypted to-device messages and to stop signing backups on a successful decryption. Out of caution, several other checks have been audited or added. This attack requires coordination between a malicious home server and an attacker, so those who trust their home servers do not need a workaround.

The optional ActiveMQ LDAP login module can be configured to use anonymous access to the LDAP server. In this case, for Apache ActiveMQ Artemis prior to version 2.16.0 and Apache ActiveMQ prior to versions 5.16.1 and 5.15.14, the anonymous context is used to verify a valid users password in error, resulting in no check on the password.

The SimpleCaptcha implementation in Liferay Portal 7.3.4, 7.3.5 and Liferay DXP 7.3 before fix pack 1 does not invalidate CAPTCHA answers after it is used, which allows remote attackers to repeatedly perform actions protected by a CAPTCHA challenge by reusing the same CAPTCHA answer.

An authentication bypass vulnerability was found in overt-engine. This flaw allows the creation of users in the system without authentication due to a flaw in the CreateUserSession command.

TRENDnet TS-S402 has a backdoor to enable TELNET.

An improper authentication vulnerability was identified in GitHub Enterprise Server that allowed a bypass of Private Mode by using a specially crafted API request. To exploit this vulnerability, an attacker would need network access to the Enterprise Server appliance configured in Private Mode. This vulnerability affected all versions of GitHub Enterprise Server since 3.9 and was fixed in version 3.9.7, 3.10.4, and 3.11.1. This vulnerability was reported via the GitHub Bug Bounty program.

The WP JobSearch WordPress plugin before 2.3.4 does not prevent attackers from logging-in as any users with the only knowledge of that user's email address.

Any unauthenticated user may send e-mail from the site with any title or content to the admin

authentik is an open-source identity provider. When initialising a oauth2 flow with a `code_challenge` and `code_method` (thus requesting PKCE), the single sign-on provider (authentik) must check if there is a matching and existing `code_verifier` during the token step. Prior to versions 2023.10.4 and 2023.8.5, authentik checks if the contents of `code_verifier` is matching only when it is provided. When it is left out completely, authentik simply accepts the token request with out it; even when the flow was started with a `code_challenge`. authentik 2023.8.5 and 2023.10.4 fix this issue.

wolfssl before 3.2.0 has a server certificate that is not properly authorized for server authentication.

Authorization vulnerability in the BootLoader module. Successful exploitation of this vulnerability may affect service integrity.

RobotsAndPencils go-saml, a SAML client library written in Go, contains an authentication bypass vulnerability in all known versions. This is due to how the `xmlsec1` command line tool is called internally to verify the signature of SAML assertions. When `xmlsec1` is used without defining the enabled key data, the origin of the public key for the signature verification is, unfortunately, not restricted. That means an attacker can sign the SAML assertions themselves and provide the required public key (e.g. an RSA key) directly embedded in the SAML token. Projects still using RobotsAndPencils/go-saml should move to another SAML library or alternatively remove support for SAML from their projects. The vulnerability can likely temporarily be fixed by forking the go-saml project and adding the command line argument `--enabled-key-data` and specifying a value such as `x509` or `raw-x509-cert` when calling the `xmlsec1` binary in the verify function. Please note that this workaround must be carefully tested before it can be used.

CloudExplorer Lite is an open source, lightweight cloud management platform. Prior to version 1.4.1, the gateway filter of CloudExplorer Lite uses a controller with path starting with `matching/API/`, which can cause a permission bypass. Version 1.4.1 contains a patch for this issue.

Cryptographic issue while performing attach with a LTE network, a rogue base station can skip the authentication phase and immediately send the Security Mode Command.

Shopware is an open commerce platform based on the Symfony php Framework and the Vue javascript framework. In versions prior to 6.4.8.2 it is possible to modify customers and to create orders without App Permission. This issue is a result of improper api route checking. Users are advised to upgrade to version 6.4.8.2. There are no known workarounds.

A vulnerability in Metasys ADS/ADX/OAS 10 versions prior to 10.1.5 and Metasys ADS/ADX/OAS 11 versions prior to 11.0.2 allows unverified password change.

RubyGem omniauth-facebook has an access token security vulnerability

The Very Simple Contact Form WordPress plugin before 11.6 exposes the solution to the captcha in the rendered contact form, both as hidden input fields and as plain text in the page, making it very easy for bots to bypass the captcha check, rendering the page a likely target for spam bots.

A vulnerability, which was classified as critical, has been found in 20120630 Novel-Plus up to 0e156c04b4b7ce0563bef6c97af4476fcda8f160. This issue affects the function addCrawlSource of the file novel-crawl/src/main/java/com/java2nb/novel/controller/CrawlController.java. The manipulation leads to missing authentication. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

Improper MDM policy management vulnerability in KME module prior to KCS version 1.39 allows MDM users to bypass Knox Manage authentication.

The vRealize Operations Manager API (8.x prior to 8.5) contains a broken access control vulnerability leading to unauthenticated API access. An unauthenticated malicious actor with network access to the vRealize Operations Manager API can add new nodes to existing vROps cluster.

This issue was addressed through improved state management. This issue is fixed in macOS Tahoe 26. Incoming FaceTime calls can appear or be accepted on a locked macOS device, even with notifications disabled on the lock screen.

Insufficient state checks lead to a vector that allows to bypass 2FA checks.

NiceGUI is an easy-to-use, Python-based UI framework. Prior to 2.9.1, authenticating with NiceGUI logged in the user for all browsers, including browsers in incognito mode. This vulnerability is fixed in 2.9.1.

Improper authentication vulnerability in GOT2000 series GT27 model VNC server versions 01.39.010 and prior, GOT2000 series GT25 model VNC server versions 01.39.010 and prior, GOT2000 series GT21 model GT2107-WTBD VNC server versions 01.40.000 and prior, GOT2000 series GT21 model GT2107-WTSD VNC server versions 01.40.000 and prior, GOT SIMPLE series GS21 model GS2110-WTBD-N VNC server versions 01.40.000 and prior and GOT SIMPLE series GS21 model GS2107-WTBD-N VNC server versions 01.40.000 and prior allows a remote unauthenticated attacker to gain unauthorized access via specially crafted packets when the "VNC server" function is used.

A vulnerability has been found in bg5sbk MiniCMS up to 1.8. The affected element is an unknown function of the file /mc-admin/page-edit.php of the component Publish Page Handler. Such manipulation leads to improper authentication. The attack may be performed from remote. The exploit has been disclosed to the public and may be used. The existence of this vulnerability is still disputed at present. The vendor was contacted early about this disclosure but did not respond in any way.

Authentication Bypass resulting in exposure of SD-WAN functionality in Citrix SD-WAN Center versions before 11.2.2, 11.1.2b and 10.2.8

Soft Serve is a self-hostable Git server for the command line. Prior to version 0.6.2, a security vulnerability in Soft Serve could allow an unauthenticated, remote attacker to bypass public key authentication when keyboard-interactive SSH authentication is active, through the `allow-keyless` setting, and the public key requires additional client-side verification for example using FIDO2 or GPG. This is due to insufficient validation procedures of the public key step during SSH request handshake, granting unauthorized access if the keyboard-interaction mode is utilized. An attacker could exploit this vulnerability by presenting manipulated SSH requests using keyboard-interactive authentication mode. This could potentially result in unauthorized access to the Soft Serve. Users should upgrade to the latest Soft Serve version `v0.6.2` to receive the patch for this issue. To workaround this vulnerability without upgrading, users can temporarily disable Keyboard-Interactive SSH Authentication using the `allow-keyless` setting.

Netskope was notified about a security gap in Netskope Client enrollment process where NSClient is using a static token “Orgkey” as authentication parameter. Since this is a static token, if leaked, cannot be rotated or revoked. A malicious actor can use this token to enroll NSClient from a customer’s tenant and impersonate a user.

The iThemes Security (formerly Better WP Security) plugin before 7.7.0 for WordPress does not enforce a new-password requirement for an existing account until the second login occurs.