An issue was discovered on Systrome Cumilon ISG-600C, ISG-600H, and ISG-800W devices with firmware V1.1-R2.1_TRUNK-20181105.bin. A shell command injection occurs by editing the description of an ISP file. The file network/isp/isp_update_edit.php does not properly validate user input, which leads to shell command injection via the des parameter.

An exploitable command injection vulnerability exists in the iocheckd service ‘I/O-Check’ function of the WAGO PFC 200 Firmware version 03.02.02(14). A specially crafted XML cache file written to a specific location on the device can be used to inject OS commands. An attacker can send a specially crafted packet to trigger the parsing of this cache file. At 0x1e9fc the extracted state value from the xml file is used as an argument to /etc/config-tools/config_interfaces interface=X1 state=<contents of state node> using sprintf(). This command is later executed via a call to system().

An exploitable command injection vulnerability exists in the iocheckd service ‘I/O-Check’ function of the WAGO PFC 200 Firmware version 03.02.02(14). A specially crafted XML cache file written to a specific location on the device can be used to inject OS commands. An attacker can send a specially crafted packet to trigger the parsing of this cache file.At 0x1e87c the extracted hostname value from the xml file is used as an argument to /etc/config-tools/change_hostname hostname=<contents of hostname node> using sprintf(). This command is later executed via a call to system().

An exploitable command injection vulnerability exists in the iocheckd service ‘I/O-Check’ function of the WAGO PFC 200 Firmware version 03.02.02(14). An attacker can send a specially crafted packet to trigger the parsing of this cache file. At 0x1e840 the extracted ntp value from the xml file is used as an argument to /etc/config-tools/config_sntp time-server-%d=<contents of ntp node> using sprintf(). This command is later executed via a call to system(). This is done in a loop and there is no limit to how many ntp entries will be parsed from the xml file.

An exploitable command injection vulnerability exists in the iocheckd service ‘I/O-Check’ function of the WAGO PFC 200 version 03.02.02(14). An attacker can send a specially crafted XML cache file At 0x1e8a8 the extracted domainname value from the xml file is used as an argument to /etc/config-tools/edit_dns_server domain-name=<contents of domainname node> using sprintf().This command is later executed via a call to system().

IBM DataPower Gateway 2018.4.1.0 through 2018.4.1.6, 7.6.0.0 through 7.6.0.15 and IBM MQ Appliance 8.0.0.0 through 8.0.0.12, 9.1.0.0 through 9.1.0.2, and 9.1.1 through 9.1.2 could allow a local attacker to execute arbitrary commands on the system, caused by a command injection vulnerability. IBM X-Force ID: 16188.

An exploitable command injection vulnerability exists in the /goform/WanParameterSetting functionality of Tenda AC9 Router AC1200 Smart Dual-Band Gigabit WiFi Route (AC9V1.0 Firmware V15.03.05.16multiTRU). A specially crafted HTTP POST request can cause a command injection in the DNS2 post parameters, resulting in code execution. An attacker can send HTTP POST request with command to trigger this vulnerability.

An exploitable command injection vulnerability exists in the /goform/WanParameterSetting functionality of Tenda AC9 Router AC1200 Smart Dual-Band Gigabit WiFi Route (AC9V1.0 Firmware V15.03.05.16multiTRU). A specially crafted HTTP POST request can cause a command injection in the DNS1 post parameters, resulting in code execution. An attacker can send HTTP POST request with command to trigger this vulnerability.

An exploitable command injection vulnerability exists in the iocheckd service ‘I/O-Check’ function of the WAGO PFC 200 version 03.02.02(14). At 0x1e3f0 the extracted dns value from the xml file is used as an argument to /etc/config-tools/edit_dns_server %s dns-server-nr=%d dns-server-name=<contents of dns node> using sprintf(). This command is later executed via a call to system(). This is done in a loop and there is no limit to how many dns entries will be parsed from the xml file.

Improper neutralization of special elements used in an OS command in Druva inSync Windows Client 6.5.0 allows a local, unauthenticated attacker to execute arbitrary operating system commands with SYSTEM privileges.

An exploitable command injection vulnerability exists in the iocheckd service ‘I/O-Check’ function of the WAGO PFC 200 Firmware version 03.02.02(14). A specially crafted XML cache file written to a specific location on the device can be used to inject OS commands. An attacker can send a specially crafted packet to trigger the parsing of this cache file.At 0x1ea28 the extracted type value from the xml file is used as an argument to /etc/config-tools/config_interfaces interface=X1 state=enabled config-type=<contents of type node> using sprintf(). This command is later executed via a call to system().

An exploitable command injection vulnerability exists in the iocheckd service ‘I/O-Check’ function of the WAGO PFC 200 Firmware version 03.02.02(14). A specially crafted XML cache file written to a specific location on the device can be used to inject OS commands. An attacker can send a specially crafted packet to trigger the parsing of this cache file. At 0x1e900 the extracted gateway value from the xml file is used as an argument to /etc/config-tools/config_default_gateway number=0 state=enabled value=<contents of gateway node> using sprintf(). This command is later executed via a call to system().

An exploitable command injection vulnerability exists in the iocheckd service ‘I/O-Check’ function of the WAGO PFC 200 version 03.02.02(14). A specially crafted XML cache file written to a specific location on the device can be used to inject OS commands. An attacker can send a specially crafted packet to trigger the parsing of this cache file.At 0x1e9fc the extracted subnetmask value from the xml file is used as an argument to /etc/config-tools/config_interfaces interface=X1 state=enabled subnet-mask=<contents of subnetmask node> using sprintf(). This command is later executed via a call to system().

D-Link DWL-2600AP 4.2.0.15 Rev A devices have an authenticated OS command injection vulnerability via the Upgrade Firmware functionality in the Web interface, using shell metacharacters in the admin.cgi?action=upgrade firmwareRestore or firmwareServerip parameter.

An improper neutralization of special elements used in an os command ('os command injection') in Fortinet FortiSwitch version 7.4.0 and 7.2.0 through 7.2.5 and 7.0.0 through 7.0.7 and 6.4.0 through 6.4.13 and 6.2.0 through 6.2.7 and 6.0.0 through 6.0.7 allows attacker to execute unauthorized code or commands via the FortiSwitch CLI.

D-Link DWL-2600AP 4.2.0.15 Rev A devices have an authenticated OS command injection vulnerability via the Restore Configuration functionality in the Web interface, using shell metacharacters in the admin.cgi?action=config_restore configRestore or configServerip parameter.

An improper neutralization of special elements used in an OS command vulnerability [CWE-78] in FortiADC CLI 7.1.0, 7.0.0 through 7.0.3, 6.2.0 through 6.2.4, 6.1 all versions, 6.0 all versions may allow a local and authenticated attacker to execute unauthorized commands via specifically crafted arguments in diagnose system df CLI command.

D-Link DWL-2600AP 4.2.0.15 Rev A devices have an authenticated OS command injection vulnerability via the Save Configuration functionality in the Web interface, using shell metacharacters in the admin.cgi?action=config_save configBackup or downloadServerip parameter.

Dell Unity, version(s) 5.4 and prior, contain(s) an Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to Command execution and Elevation of privileges.

A vulnerability in Cisco Enterprise NFV Infrastructure Software (NFVIS) could allow an authenticated, local attacker to execute arbitrary commands on the underlying operating system (OS) of an affected device as root. The vulnerability is due to insufficient input validation of a configuration file that is accessible to a local shell user. An attacker could exploit this vulnerability by including malicious input during the execution of this file. A successful exploit could allow the attacker to execute arbitrary commands on the underlying OS as root.

An improper neutralization of special elements used in an OS command vulnerability [CWE-78] in the management interface of FortiTester 3.0.0 through 7.2.3 may allow an authenticated attacker to execute unauthorized commands via specifically crafted arguments to existing commands.

Dell Unity, version(s) 5.4 and prior, contain(s) an Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to Code execution and Elevation of privileges.

Dell Unity, version(s) 5.4 and prior, contain(s) an Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to Command execution and Elevation of privileges.

Dell Unity, version(s) 5.4 and prior, contain(s) an Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to Code execution and Elevation of privileges.

A vulnerability in the command-line interface of Cisco Integrated Management Controller (IMC) could allow an authenticated, local attacker with read-only credentials to inject arbitrary commands that could allow them to obtain root privileges. The vulnerability is due to insufficient validation of user-supplied input on the command-line interface. An attacker could exploit this vulnerability by authenticating with read-only privileges via the CLI of an affected device and submitting crafted input to the affected commands. A successful exploit could allow an attacker to execute arbitrary commands on the device with root privileges.

Dell Unity, version(s) 5.4 and prior, contain(s) an Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to Command execution and Elevation of privileges.

Dell Unity, version(s) 5.4 and prior, contain(s) an Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to Command execution and Elevation of privileges.

This vulnerability allows local attackers to escalate privileges on affected installations of Parallels Desktop Parallels Desktop version 14.1.3 (45485). An attacker must first obtain the ability to execute low-privileged code on the target guest system in order to exploit this vulnerability. The specific flaw exists within the Parallels Service. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to escalate privileges and execute code in the context of root. Was ZDI-CAN-8685.

KioWare for Windows through v8.33 was discovered to contain an incomplete blacklist filter for blocked dialog boxes on Windows 10. This issue can allow attackers to open a file dialog box via the function showDirectoryPicker() which can then be used to open an unprivileged command prompt.

A vulnerability in the CLI of Cisco NX-OS Software could allow an authenticated, local attacker to access internal services that should be restricted on an affected device, such as the NX-API. The vulnerability is due to insufficient validation of arguments passed to a certain CLI command. An attacker could exploit this vulnerability by including malicious input as the argument to the affected command. A successful exploit could allow the attacker to bypass intended restrictions and access internal services of the device. An attacker would need valid device credentials to exploit this vulnerability.

Dell Unity, version(s) 5.4 and prior, contain(s) an Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to Command execution and Elevation of privileges.

NVIDIA WebDataset for all platforms contains a vulnerability where an attacker could execute arbitrary code with elevated permissions. A successful exploit of this vulnerability might lead to escalation of privileges, data tampering, information disclosure, and denial of service.

A vulnerability in Cisco IOS XE Software could allow an authenticated, local attacker to inject arbitrary commands that are executed with elevated privileges. The vulnerability is due to insufficient input validation of commands supplied by the user. An attacker could exploit this vulnerability by authenticating to a device and submitting crafted input to the affected commands. An exploit could allow the attacker to gain root privileges on the affected device.

An OS common injection vulnerability exists in the ESM certificate API, whereby incorrectly neutralized special elements may have allowed an unauthorized user to execute system command injection for the purpose of privilege escalation or to execute arbitrary commands.

A vulnerability in a specific CLI command implementation of Cisco Nexus 9000 Series ACI Mode Switch Software could allow an authenticated, local attacker to escape a restricted shell on an affected device. The vulnerability is due to insufficient sanitization of user-supplied input when issuing a specific CLI command with parameters on an affected device. An attacker could exploit this vulnerability by authenticating to the device CLI and issuing certain commands. A successful exploit could allow the attacker to escape the restricted shell and execute arbitrary commands with root-level privileges on the affected device. This vulnerability only affects Cisco Nexus 9000 Series ACI Mode Switches that are running a release prior to 14.0(3d).

The Tecno Camon iClick Android device with a build fingerprint of TECNO/H633/TECNO-IN6:8.1.0/O11019/A-180409V96:user/release-keys contains a pre-installed platform app with a package name of com.lovelyfont.defcontainer (versionCode=7, versionName=7.0.8). This app contains an exported service named com.lovelyfont.manager.FontCoverService that allows any app co-located on the device to supply arbitrary commands via shell script to be executed as the system user that are triggered by writing an attacker-selected message to the logcat log. This app cannot be disabled by the user and the attack can be performed by a zero-permission app. Executing commands as the system user can allow a third-party app to video record the user's screen, factory reset the device, obtain the user's notifications, read the logcat logs, inject events in the Graphical User Interface (GUI), and obtains the user's text messages, and more. Executing commands as the system user can allow a third-party app to factory reset the device, obtain the user's notifications, read the logcat logs, inject events in the GUI, change the default Input Method Editor (IME) (e.g., keyboard) with one contained within the attacking app that contains keylogging functionality, and obtains the user's text messages, and more.

The Tecno Camon Android device with a build fingerprint of TECNO/H612/TECNO-ID5a:8.1.0/O11019/F-180828V106:user/release-keys contains a pre-installed platform app with a package name of com.lovelyfont.defcontainer (versionCode=7, versionName=7.0.11). This app contains an exported service named com.lovelyfont.manager.FontCoverService that allows any app co-located on the device to supply arbitrary commands via shell script to be executed as the system user that are triggered by writing an attacker-selected message to the logcat log. This app cannot be disabled by the user and the attack can be performed by a zero-permission app. Executing commands as the system user can allow a third-party app to video record the user's screen, factory reset the device, obtain the user's notifications, read the logcat logs, inject events in the Graphical User Interface (GUI), and obtains the user's text messages, and more. Executing commands as the system user can allow a third-party app to factory reset the device, obtain the user's notifications, read the logcat logs, inject events in the GUI, change the default Input Method Editor (IME) (e.g., keyboard) with one contained within the attacking app that contains keylogging functionality, and obtains the user's text messages, and more.

The Tecno Camon Android device with a build fingerprint of TECNO/H622/TECNO-ID5b:8.1.0/O11019/G-180829V31:user/release-keys contains a pre-installed platform app with a package name of com.lovelyfont.defcontainer (versionCode=7, versionName=7.0.11). This app contains an exported service named com.lovelyfont.manager.FontCoverService that allows any app co-located on the device to supply arbitrary commands via shell script to be executed as the system user that are triggered by writing an attacker-selected message to the logcat log. This app cannot be disabled by the user and the attack can be performed by a zero-permission app. Executing commands as the system user can allow a third-party app to video record the user's screen, factory reset the device, obtain the user's notifications, read the logcat logs, inject events in the Graphical User Interface (GUI), and obtains the user's text messages, and more. Executing commands as the system user can allow a third-party app to factory reset the device, obtain the user's notifications, read the logcat logs, inject events in the GUI, change the default Input Method Editor (IME) (e.g., keyboard) with one contained within the attacking app that contains keylogging functionality, and obtains the user's text messages, and more.

The Tecno Camon iAir 2 Plus Android device with a build fingerprint of TECNO/H622/TECNO-ID3k:8.1.0/O11019/E-180914V83:user/release-keys contains a pre-installed platform app with a package name of com.lovelyfont.defcontainer (versionCode=7, versionName=7.0.11). This app contains an exported service named com.lovelyfont.manager.FontCoverService that allows any app co-located on the device to supply arbitrary commands via shell script to be executed as the system user that are triggered by writing an attacker-selected message to the logcat log. This app cannot be disabled by the user and the attack can be performed by a zero-permission app. Executing commands as the system user can allow a third-party app to video record the user's screen, factory reset the device, obtain the user's notifications, read the logcat logs, inject events in the Graphical User Interface (GUI), and obtains the user's text messages, and more. Executing commands as the system user can allow a third-party app to factory reset the device, obtain the user's notifications, read the logcat logs, inject events in the GUI, change the default Input Method Editor (IME) (e.g., keyboard) with one contained within the attacking app that contains keylogging functionality, and obtains the user's text messages, and more.

The Tecno Camon iClick 2 Android device with a build fingerprint of TECNO/H622/TECNO-ID6:8.1.0/O11019/F-180824V116:user/release-keys contains a pre-installed platform app with a package name of com.lovelyfont.defcontainer (versionCode=7, versionName=7.0.11). This app contains an exported service named com.lovelyfont.manager.FontCoverService that allows any app co-located on the device to supply arbitrary commands via shell script to be executed as the system user that are triggered by writing an attacker-selected message to the logcat log. This app cannot be disabled by the user and the attack can be performed by a zero-permission app. Executing commands as the system user can allow a third-party app to video record the user's screen, factory reset the device, obtain the user's notifications, read the logcat logs, inject events in the Graphical User Interface (GUI), and obtains the user's text messages, and more. Executing commands as the system user can allow a third-party app to factory reset the device, obtain the user's notifications, read the logcat logs, inject events in the GUI, change the default Input Method Editor (IME) (e.g., keyboard) with one contained within the attacking app that contains keylogging functionality, and obtains the user's text messages, and more.

A vulnerability was found in KylinSoft kylin-software-properties on KylinOS. It has been rated as critical. This issue affects the function setMainSource. The manipulation leads to os command injection. Local access is required to approach this attack. The exploit has been disclosed to the public and may be used. Upgrading to version 0.0.1-130 is able to address this issue. It is recommended to upgrade the affected component. The associated identifier of this vulnerability is VDB-230687. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

The Netskope client service, v57 before 57.2.0.219 and v60 before 60.2.0.214, running with NT\SYSTEM privilege, accepts network connections from localhost. The connection handling function in this service suffers from command injection vulnerability. Local users can use this vulnerability to execute code with NT\SYSTEM privilege.

A vulnerability in a CLI command related to the virtualization manager (VMAN) in Cisco NX-OS Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying Linux operating system with root privileges. The vulnerability is due to insufficient validation of arguments passed to a specific VMAN CLI command on an affected device. An attacker could exploit this vulnerability by including malicious input as the argument of an affected command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying Linux operating system with root privileges, which may lead to complete system compromise. An attacker would need valid administrator credentials to exploit this vulnerability.

EnGenius ENH1350EXT A8J-ENH1350EXT devices through 3.9.3.2_c1.9.51 allow (blind) OS Command Injection via shell metacharacters to the Ping or Speed Test utility. During the time of initial setup, the device creates an open unsecured network whose admin panel is configured with the default credentials of admin/admin. An unauthorized attacker in proximity to the Wi-Fi network can exploit this window of time to execute arbitrary OS commands with root-level permissions.

TOTOLINK X5000R V9.1.0cu.2350_B20230313 was discovered to contain an OS command injection vulnerability via the "recHour" parameter in setScheduleCfg.

virtualenv before 20.26.6 allows command injection through the activation scripts for a virtual environment. Magic template strings are not quoted correctly when replacing. NOTE: this is not the same as CVE-2024-9287.

Dell Unity, version(s) 5.4 and prior, contain(s) an Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to Command execution and Elevation of privileges.

A vulnerability in the fosexec command of Brocade Fabric OS after Brocade Fabric OS v9.1.0 and, before Brocade Fabric OS v9.1.1 could allow a local authenticated user to perform privilege escalation to root by breaking the rbash shell. Starting with Fabric OS v9.1.0, “root” account access is disabled.

Dell Unity, version(s) 5.4 and prior, contain(s) an Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to execution of arbitrary operating system commands with root privileges and elevation of privileges.

IBM AIX 7.2, 7.3 and VIOS 3.1 and 4.1 could allow a local user to execute arbitrary commands on the system due to improper neutralization of input.