A vulnerability in a specific CLI command implementation of Cisco Nexus 9000 Series ACI Mode Switch Software could allow an authenticated, local attacker to escape a restricted shell on an affected device. The vulnerability is due to insufficient sanitization of user-supplied input when issuing a specific CLI command with parameters on an affected device. An attacker could exploit this vulnerability by authenticating to the device CLI and issuing certain commands. A successful exploit could allow the attacker to escape the restricted shell and execute arbitrary commands with root-level privileges on the affected device. This vulnerability only affects Cisco Nexus 9000 Series ACI Mode Switches that are running a release prior to 14.0(3d).

TOTOLINK A810R V5.9c.4050_B20190424 was discovered to contain a command injection vulnerability via the component downloadFile.cgi.

ProtonVPN before 3.2.10 on Windows mishandles the drive installer path, which should use this: '"' + ExpandConstant('{autopf}\Proton\Drive') + '"' in Setup/setup.iss.

Win32k Elevation of Privilege Vulnerability

Dell Unity, version(s) 5.4 and prior, contain(s) an Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to Command execution and Elevation of privileges.

A command injection is possible through the user interface, allowing arbitrary command execution as the root user. oMG2000 running MGOS 3.15.1 or earlier is affected.  MG90 running MGOS 4.2.1 or earlier is affected.

An issue was discovered in Pi-Hole through 5.0. The local www-data user has sudo privileges to execute the pihole core script as root without a password, which could allow an attacker to obtain root access via shell metacharacters to this script's setdns command.

Pi-hole 4.4 allows a user able to write to /etc/pihole/dns-servers.conf to escalate privileges through command injection (shell metacharacters after an IP address).

Valve Source allows local users to gain privileges by writing to the /tmp/hl2_relaunch file, which is later executed in the context of a different user account.

The 'Copy as cURL' feature of Devtools' network tab did not properly escape the HTTP method of a request, which can be controlled by the website. If a user used the 'Copy as cURL' feature and pasted the command into a terminal, it could have resulted in command injection and arbitrary command execution. *Note: this issue only affects Firefox on Windows operating systems.*. This vulnerability affects Firefox ESR < 68.8, Firefox < 76, and Thunderbird < 68.8.0.

SSH authenticated user when access the PAM server can execute an OS command to gain the full system access using bash. This issue affects Privileged Access Manager before 3.7.0.1.

IBM InfoSphere Information Server 11.7 could allow a locally authenticated attacker to execute arbitrary commands on the system by sending a specially crafted request.

This issue was addressed with improved checks. This issue is fixed in macOS Mojave 10.14.4. A local user may be able to execute arbitrary shell commands.

An authenticated shell command injection issue has been discovered in Raisecom ISCOM HT803G-U, HT803G-W, HT803G-1GE, and HT803G GPON products with the firmware version ISCOMHT803G-U_2.0.0_140521_R4.1.47.002 or below, The values of the newpass and confpass parameters in /bin/WebMGR are used in a system call in the firmware. Because there is no user input validation, this leads to authenticated code execution on the device.

An authenticated shell command injection issue has been discovered in Raisecom ISCOM HT803G-U, HT803G-W, HT803G-1GE, and HT803G GPON products with the firmware version ISCOMHT803G-U_2.0.0_140521_R4.1.47.002 or below. The value of the fmgpon_loid parameter is used in a system call inside the boa binary. Because there is no user input validation, this leads to authenticated code execution on the device.

An issue was discovered on Systrome Cumilon ISG-600C, ISG-600H, and ISG-800W devices with firmware V1.1-R2.1_TRUNK-20181105.bin. A shell command injection occurs by editing the description of an ISP file. The file network/isp/isp_update_edit.php does not properly validate user input, which leads to shell command injection via the des parameter.

An exploitable command injection vulnerability exists in the iocheckd service ‘I/O-Check’ function of the WAGO PFC 200 Firmware version 03.02.02(14). A specially crafted XML cache file written to a specific location on the device can be used to inject OS commands. An attacker can send a specially crafted packet to trigger the parsing of this cache file. At 0x1e9fc the extracted state value from the xml file is used as an argument to /etc/config-tools/config_interfaces interface=X1 state=<contents of state node> using sprintf(). This command is later executed via a call to system().

An exploitable command injection vulnerability exists in the iocheckd service ‘I/O-Check’ function of the WAGO PFC 200 version 03.02.02(14). A specially crafted XML cache file written to a specific location on the device can be used to inject OS commands. An attacker can send a specially crafted packet to trigger the parsing of this cache file.At 0x1e9fc the extracted subnetmask value from the xml file is used as an argument to /etc/config-tools/config_interfaces interface=X1 state=enabled subnet-mask=<contents of subnetmask node> using sprintf(). This command is later executed via a call to system().

An exploitable command injection vulnerability exists in the /goform/WanParameterSetting functionality of Tenda AC9 Router AC1200 Smart Dual-Band Gigabit WiFi Route (AC9V1.0 Firmware V15.03.05.16multiTRU). A specially crafted HTTP POST request can cause a command injection in the DNS1 post parameters, resulting in code execution. An attacker can send HTTP POST request with command to trigger this vulnerability.

An exploitable command injection vulnerability exists in the iocheckd service ‘I/O-Check’ function of the WAGO PFC 200 Firmware version 03.02.02(14). A specially crafted XML cache file written to a specific location on the device can be used to inject OS commands. An attacker can send a specially crafted packet to trigger the parsing of this cache file.At 0x1ea28 the extracted type value from the xml file is used as an argument to /etc/config-tools/config_interfaces interface=X1 state=enabled config-type=<contents of type node> using sprintf(). This command is later executed via a call to system().

An exploitable command injection vulnerability exists in the iocheckd service ‘I/O-Check’ function of the WAGO PFC 200 Firmware version 03.02.02(14). An attacker can send a specially crafted packet to trigger the parsing of this cache file. At 0x1e840 the extracted ntp value from the xml file is used as an argument to /etc/config-tools/config_sntp time-server-%d=<contents of ntp node> using sprintf(). This command is later executed via a call to system(). This is done in a loop and there is no limit to how many ntp entries will be parsed from the xml file.

Improper neutralization of special elements used in an OS command in Druva inSync Windows Client 6.5.0 allows a local, unauthenticated attacker to execute arbitrary operating system commands with SYSTEM privileges.

An exploitable command injection vulnerability exists in the iocheckd service ‘I/O-Check’ function of the WAGO PFC 200 Firmware version 03.02.02(14). A specially crafted XML cache file written to a specific location on the device can be used to inject OS commands. An attacker can send a specially crafted packet to trigger the parsing of this cache file. At 0x1e900 the extracted gateway value from the xml file is used as an argument to /etc/config-tools/config_default_gateway number=0 state=enabled value=<contents of gateway node> using sprintf(). This command is later executed via a call to system().

An exploitable command injection vulnerability exists in the /goform/WanParameterSetting functionality of Tenda AC9 Router AC1200 Smart Dual-Band Gigabit WiFi Route (AC9V1.0 Firmware V15.03.05.16multiTRU). A specially crafted HTTP POST request can cause a command injection in the DNS2 post parameters, resulting in code execution. An attacker can send HTTP POST request with command to trigger this vulnerability.

An exploitable command injection vulnerability exists in the iocheckd service ‘I/O-Check’ function of the WAGO PFC 200 Firmware version 03.02.02(14). An attacker can send specially crafted packet at 0x1ea48 to the extracted hostname value from the xml file that is used as an argument to /etc/config-tools/config_interfaces interface=X1 state=enabled ip-address=<contents of ip node> using sprintf().

An exploitable command injection vulnerability exists in the iocheckd service ‘I/O-Check’ function of the WAGO PFC 200 Firmware version 03.02.02(14). A specially crafted XML cache file written to a specific location on the device can be used to inject OS commands. An attacker can send a specially crafted packet to trigger the parsing of this cache file.At 0x1e87c the extracted hostname value from the xml file is used as an argument to /etc/config-tools/change_hostname hostname=<contents of hostname node> using sprintf(). This command is later executed via a call to system().

An exploitable command injection vulnerability exists in the iocheckd service ‘I/O-Check’ function of the WAGO PFC 200 version 03.02.02(14). An attacker can send a specially crafted XML cache file At 0x1e8a8 the extracted domainname value from the xml file is used as an argument to /etc/config-tools/edit_dns_server domain-name=<contents of domainname node> using sprintf().This command is later executed via a call to system().

TOTOLINK X5000R V9.1.0cu.2350_B20230313 was discovered to contain an OS command injection vulnerability via the "recHour" parameter in setScheduleCfg.

virtualenv before 20.26.6 allows command injection through the activation scripts for a virtual environment. Magic template strings are not quoted correctly when replacing. NOTE: this is not the same as CVE-2024-9287.

Rizin is a UNIX-like reverse engineering framework and command-line toolset. `rizin.c` still had an old snippet of code which suffered a command injection due the usage of `rz_core_cmdf` to invoke the command `m` which was removed in v0.1.x. A malicious binary defining `bclass` (part of RzBinInfo) is executed if `rclass` (part of RzBinInfo) is set to `fs`; the vulnerability can be exploited by any bin format where `bclass` and `rclass` are user defined. This vulnerability is fixed in 0.7.4.

D-Link DWL-2600AP 4.2.0.15 Rev A devices have an authenticated OS command injection vulnerability via the Upgrade Firmware functionality in the Web interface, using shell metacharacters in the admin.cgi?action=upgrade firmwareRestore or firmwareServerip parameter.

Dell Unity, version(s) 5.4 and prior, contain(s) an Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to Command execution and Elevation of privileges.

Dell Unity, version(s) 5.4 and prior, contain(s) an Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to execution of arbitrary operating system commands with root privileges and elevation of privileges.

All versions of the package semver-tags are vulnerable to Command Injection via the getGitTagsRemote function due to improper input sanitization.

A improper neutralization of special elements used in a command ('command injection') in Fortinet FortiExtender version 7.0.1 and below, 4.2.3 and below, 4.1.7 and below allows an authenticated attacker to execute privileged shell commands via CLI commands including special characters

All versions of the package bwm-ng are vulnerable to Command Injection due to improper input sanitization in the 'check' function in the bwm-ng.js file. **Note:** To execute the code snippet and potentially exploit the vulnerability, the attacker needs to have the ability to run Node.js code within the target environment. This typically requires some level of access to the system or application hosting the Node.js environment.

On Windows platforms, a "best fit" character encoding conversion of command line arguments to Subversion's executables (e.g., svn.exe, etc.) may lead to unexpected command line argument interpretation, including argument injection and execution of other programs, if a specially crafted command line argument string is processed. All versions of Subversion up to and including Subversion 1.14.3 are affected on Windows platforms only. Users are recommended to upgrade to version Subversion 1.14.4, which fixes this issue. Subversion is not affected on UNIX-like platforms.

EnGenius ENH1350EXT A8J-ENH1350EXT devices through 3.9.3.2_c1.9.51 allow (blind) OS Command Injection via shell metacharacters to the Ping or Speed Test utility. During the time of initial setup, the device creates an open unsecured network whose admin panel is configured with the default credentials of admin/admin. An unauthorized attacker in proximity to the Wi-Fi network can exploit this window of time to execute arbitrary OS commands with root-level permissions.

In TOTOLINK X5000r v9.1.0cu.2350_b20230313, the file /cgi-bin/cstecgi.cgi contains an OS command injection vulnerability in addBlacklist. Authenticated Attackers can send malicious packet to execute arbitrary commands.

In TOTOLINK X5000r v9.1.0cu.2350_b20230313, the file /cgi-bin/cstecgi.cgi contains an OS command injection vulnerability in setL2tpServerCfg. Authenticated Attackers can send malicious packet to execute arbitrary commands.

D-Link DWL-2600AP 4.2.0.15 Rev A devices have an authenticated OS command injection vulnerability via the Save Configuration functionality in the Web interface, using shell metacharacters in the admin.cgi?action=config_save configBackup or downloadServerip parameter.

D-Link DWL-2600AP 4.2.0.15 Rev A devices have an authenticated OS command injection vulnerability via the Restore Configuration functionality in the Web interface, using shell metacharacters in the admin.cgi?action=config_restore configRestore or configServerip parameter.

An Improper Neutralization of Special Elements vulnerability in Juniper Networks Junos OS Evolved commands allows a local, authenticated attacker with low privileges to escalate their privileges to 'root' leading to a full compromise of the system. The Junos OS Evolved CLI doesn't properly handle command options in some cases, allowing users which execute specific CLI commands with a crafted set of parameters to escalate their privileges to root on shell level. This issue affects Junos OS Evolved: * All version before 20.4R3-S6-EVO,  * 21.2-EVO versions before 21.2R3-S4-EVO, * 21.4-EVO versions before 21.4R3-S6-EVO,  * 22.2-EVO versions before 22.2R2-S1-EVO, 22.2R3-EVO,  * 22.3-EVO versions before 22.3R2-EVO.

An Improper Neutralization of Special Elements vulnerability in Juniper Networks Junos OS Evolved commands allows a local, authenticated attacker with low privileges to escalate their privileges to 'root' leading to a full compromise of the system. The Junos OS Evolved CLI doesn't properly handle command options in some cases, allowing users which execute specific CLI commands with a crafted set of parameters to escalate their privileges to root on shell level. This issue affects Junos OS Evolved:  * 21.1-EVO versions 21.1R1-EVO and later before 21.2R3-S8-EVO,  * 21.4-EVO versions before 21.4R3-S7-EVO, * 22.1-EVO versions before 22.1R3-S6-EVO,  * 22.2-EVO versions before 22.2R3-EVO, * 22.3-EVO versions before 22.3R2-EVO.

A vulnerability in Cisco Enterprise NFV Infrastructure Software (NFVIS) could allow an authenticated, local attacker to execute arbitrary commands on the underlying operating system (OS) of an affected device as root. The vulnerability is due to insufficient input validation of a configuration file that is accessible to a local shell user. An attacker could exploit this vulnerability by including malicious input during the execution of this file. A successful exploit could allow the attacker to execute arbitrary commands on the underlying OS as root.

An OS command injection vulnerability has been reported to affect several QNAP operating system versions. If exploited, the vulnerability could allow local network users to execute commands via unspecified vectors. We have already fixed the vulnerability in the following versions: QTS 5.1.8.2823 build 20240712 and later QuTS hero h5.1.8.2823 build 20240712 and later

A improper neutralization of special elements used in an os command ('os command injection') in Fortinet FortiAP-S 6.2 all verisons, and 6.4.0 through 6.4.9, FortiAP-W2 6.4 all versions, 7.0 all versions, 7.2.0 through 7.2.3, and 7.4.0 through 7.4.2, FortiAP 6.4 all versions, 7.0 all versions, 7.2.0 through 7.2.3, and 7.4.0 through 7.4.2 allow a local authenticated attacker to execute unauthorized code via the CLI.

A vulnerability in Cisco IOS XE Software could allow an authenticated, local attacker to inject arbitrary commands that are executed with elevated privileges. The vulnerability is due to insufficient input validation of commands supplied by the user. An attacker could exploit this vulnerability by authenticating to a device and submitting crafted input to the affected commands. An exploit could allow the attacker to gain root privileges on the affected device.

Dell Unity, versions prior to 5.4, contains an OS Command Injection Vulnerability in its svc_nas utility. An authenticated attacker could potentially exploit this vulnerability, escaping the restricted shell and execute arbitrary operating system commands with root privileges.

A vulnerability in the command-line interface of Cisco Integrated Management Controller (IMC) could allow an authenticated, local attacker with read-only credentials to inject arbitrary commands that could allow them to obtain root privileges. The vulnerability is due to insufficient validation of user-supplied input on the command-line interface. An attacker could exploit this vulnerability by authenticating with read-only privileges via the CLI of an affected device and submitting crafted input to the affected commands. A successful exploit could allow an attacker to execute arbitrary commands on the device with root privileges.