A stack-based buffer overflow vulnerability exists in the JSON Parsing getblockschedule() functionality of Netgear RAX30 1.0.11.96 and 1.0.7.78. A specially crafted HTTP request can lead to code execution. An attacker can make an authenticated HTTP request to trigger this vulnerability.

A stack overflow flaw was found in the Linux kernel's TIPC protocol functionality in the way a user sends a packet with malicious content where the number of domain member nodes is higher than the 64 allowed. This flaw allows a remote user to crash the system or possibly escalate their privileges if they have access to the TIPC network.

Certain NETGEAR devices are affected by a stack-based buffer overflow by an authenticated user. This affects R6400v2 before 1.0.4.118, R6700v3 before 1.0.4.118, R6900P before 1.3.3.140, R7000 before 1.0.11.126, R7000P before 1.3.3.140, RAX200 before 1.0.5.126, RAX75 before 1.0.5.126, and RAX80 before 1.0.5.126.

Certain NETGEAR devices are affected by a stack-based buffer overflow by an authenticated user. This affects R6400 before 1.0.1.70, R7000 before 1.0.11.126, R7900 before 1.0.4.46, R7900P before 1.4.2.84, R7960P before 1.4.2.84, R8000 before 1.0.4.74, R8000P before 1.4.2.84, RAX200 before 1.0.4.120, RS400 before 1.5.1.80, R6400v2 before 1.0.4.118, R7000P before 1.3.3.140, RAX80 before 1.0.4.120, R6700v3 before 1.0.4.118, R6900P before 1.3.3.140, and RAX75 before 1.0.4.120.

The Samba vfs_fruit module uses extended file attributes (EA, xattr) to provide "...enhanced compatibility with Apple SMB clients and interoperability with a Netatalk 3 AFP fileserver." Samba versions prior to 4.13.17, 4.14.12 and 4.15.5 with vfs_fruit configured allow out-of-bounds heap read and write via specially crafted extended file attributes. A remote attacker with write access to extended file attributes can execute arbitrary code with the privileges of smbd, typically root.

Certain NETGEAR devices are affected by a stack-based buffer overflow by an authenticated user. This affects R6400 before 1.0.1.68, R7000 before 1.0.11.116, R6900P before 1.3.3.140, R7000P before 1.3.3.140, R7900 before 1.0.4.38, RAX75 before 1.0.3.102, RAX80 before 1.0.3.102, and XR300 before 1.0.3.50.

Heap buffer overflow in Clickhouse's LZ4 compression codec when parsing a malicious query. There is no verification that the copy operations in the LZ4::decompressImpl loop and especially the arbitrary copy operation wildCopy<copy_amount>(op, ip, copy_end), don’t exceed the destination buffer’s limits. This issue is very similar to CVE-2021-43304, but the vulnerable copy operation is in a different wildCopy call.

A heap-based buffer overflow in Fortinet FortiWeb version 6.4.1 and 6.4.0, version 6.3.15 and below, version 6.2.6 and below allows attacker to execute unauthorized code or commands via crafted HTTP requests to the LogReport API controller.

Heap buffer overflow in Clickhouse's LZ4 compression codec when parsing a malicious query. There is no verification that the copy operations in the LZ4::decompressImpl loop and especially the arbitrary copy operation wildCopy<copy_amount>(op, ip, copy_end), don’t exceed the destination buffer’s limits.

A vulnerability, which was classified as critical, has been found in Tenda FH1203 2.0.1.6. Affected by this issue is the function fromNatStaticSetting of the file /goform/NatStaticSetting. The manipulation of the argument page leads to stack-based buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. VDB-258158 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

Multiple heap-based buffer overflow vulnerabilities in some web API controllers of FortiWeb 6.4.1, 6.4.0, and 6.3.0 through 6.3.15 may allow a remote authenticated attacker to execute arbitrary code or commands via specifically crafted HTTP requests.

A stack overflow vulnerability exists in the httpd service in ASUS RT-AX56U Router Version 3.0.0.4.386.44266. This vulnerability is caused by the strcat function called by "caupload" input handle function allowing the user to enter 0xFFFF bytes into the stack. This vulnerability allows an attacker to execute commands remotely. The vulnerability requires authentication.

The affected product’s code base doesn’t properly control arguments for specific functions, which could lead to a stack overflow.

Redis is an in-memory database that persists on disk. In Redit 7.0 prior to 7.0.12, extracting key names from a command and a list of arguments may, in some cases, trigger a heap overflow and result in reading random heap memory, heap corruption and potentially remote code execution. Several scenarios that may lead to authenticated users executing a specially crafted `COMMAND GETKEYS` or `COMMAND GETKEYSANDFLAGS`and authenticated users who were set with ACL rules that match key names, executing a specially crafted command that refers to a variadic list of key names. The vulnerability is patched in Redis 7.0.12.

Multiple buffer overflows in the limited configuration shell (/sbin/gs_config) on Grandstream HT801 devices before 1.0.29 allow remote authenticated users to execute arbitrary code as root via a crafted manage_if setting, thus bypassing the intended restrictions of this shell and taking full control of the device. There are default weak credentials that can be used to authenticate.

A stack-based buffer overflow in Fortinet FortiWeb version 6.3.14 and below, 6.2.4 and below allows attacker to execute unauthorized code or commands via crafted parameters in CLI command execution

Multiple stack-based buffer overflows in the API controllers of FortiWeb 6.4.1, 6.4.0, and 6.3.0 through 6.3.15 may allow an authenticated attacker to achieve arbitrary code execution via specially crafted requests.

In Advantech WebAccess, Versions 8.4.2 and prior. A stack-based buffer overflow vulnerability caused by a lack of proper validation of the length of user-supplied data may allow remote code execution.

A vulnerability was found in TOTOLINK EX1800T up to 9.1.0cu.2112_B20220316. It has been declared as critical. Affected by this vulnerability is the function setWiFiExtenderConfig of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument apcliSsid leads to stack-based buffer overflow. The attack can be launched remotely. The exploit has been disclosed to the public and may be used.

TOTOLINK NR1800X V9.1.0u.6279_B20210910 was discovered to contain an authenticated stack overflow via the pppoeUser parameter in the setOpModeCfg function.

Tenda PA6 Wi-Fi Powerline extender 1.0.1.21 is vulnerable to a stack-based buffer overflow, caused by improper bounds checking by the "Wireless" section in the web-UI. By sending a specially crafted hostname, a remote attacker could overflow a buffer and execute arbitrary code on the system or cause the application to crash.

Tenda AX3 V16.03.12.11 is vulnerable to Buffer Overflow via /goform/SetFirewallCfg.

Western Digital My Cloud EX2 Ultra firmware 2.31.183 allows web users (including guest account) to remotely execute arbitrary code via a stack-based buffer overflow. There is no size verification logic in one of functions in libscheddl.so, and download_mgr.cgi makes it possible to enter large-sized f_idx inputs.

A vulnerability was found in Tenda O6 1.0.0.7(2054). It has been declared as critical. This vulnerability affects the function frommacFilterModify of the file /goform/operateMacFilter. The manipulation of the argument mac leads to stack-based buffer overflow. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability has been identified in SPPA-T3000 Application Server (All versions < Service Pack R8.2 SP2). An attacker with valid authentication at the RMI interface could be able to gain remote code execution through an unsecured file upload. Please note that an attacker needs to have access to the Application Highway in order to exploit this vulnerability. At the time of advisory publication no public exploitation of this security vulnerability was known.

Western Digital My Cloud EX2 Ultra firmware 2.31.183 allows web users (including guest accounts) to remotely execute arbitrary code via a download_mgr.cgi stack-based buffer overflow.

A vulnerability, which was classified as critical, has been found in Tenda i22 1.0.0.3(4687). This issue affects the function formApPortalOneKeyAuth of the file /goform/apPortalOneKeyAuth. The manipulation of the argument data leads to buffer overflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

Advantech EKI-1524, EKI-1522, EKI-1521 devices through 1.21 are affected by a Stack-based Buffer Overflow vulnerability, which can be triggered by authenticated users via a crafted POST request.

TrendNet Wireless AC Easy-Upgrader TEW-820AP v1.0R, firmware version 1.01.B01 was discovered to contain a stack overflow via the submit-url parameter at /formSysLog. This vulnerability allows attackers to execute arbitrary code via a crafted payload. NOTE: This vulnerability only affects products that are no longer supported by the maintainer.

A stack-based buffer overflow vulnerability exists in the libzebra.so.0.0.0 security_decrypt_password functionality of Milesight UR32L v32.3.0.5. A specially crafted HTTP request can lead to a buffer overflow. An authenticated attacker can send an HTTP request to trigger this vulnerability.

TrendNet Wireless AC Easy-Upgrader TEW-820AP v1.0R, firmware version 1.01.B01 was discovered to contain a stack overflow via the submit-url parameter at /formSystemCheck. This vulnerability allows attackers to execute arbitrary code via a crafted payload. NOTE: This vulnerability only affects products that are no longer supported by the maintainer.

A stack-based buffer overflow vulnerability [CWE-121] in FortiWeb version 7.0.1 and below, 6.4 all versions, version 6.3.19 and below SAML server configuration may allow an authenticated attacker to achieve arbitrary code execution via specifically crafted XML files.

TrendNet Wireless AC Easy-Upgrader TEW-820AP v1.0R, firmware version 1.01.B01 was discovered to contain a stack overflow via the submit-url parameter at /formPasswordAuth. This vulnerability allows attackers to execute arbitrary code via a crafted payload. NOTE: This vulnerability only affects products that are no longer supported by the maintainer.

Tenda AC9 V15.03.05.19 was discovered to contain a stack overflow via the deviceList parameter at /goform/setMacFilterCfg.

Contiki-NG is an open-source, cross-platform operating system for Next-Generation IoT devices. The 6LoWPAN implementation in the Contiki-NG operating system (file os/net/ipv6/sicslowpan.c) contains an input function that processes incoming packets and copies them into a packet buffer. Because of a missing length check in the input function, it is possible to write outside the packet buffer's boundary. The vulnerability can be exploited by anyone who has the possibility to send 6LoWPAN packets to a Contiki-NG system. In particular, the vulnerability is exposed when sending either of two types of 6LoWPAN packets: an unfragmented packet or the first fragment of a fragmented packet. If the packet is sufficiently large, a subsequent memory copy will cause an out-of-bounds write with data supplied by the attacker.

NVIDIA GPU Display Driver for Windows contains a vulnerability in the user-mode layer, where an unprivileged user can cause an out-of-bounds write, which may lead to code execution, information disclosure, and denial of service.

TOTOLINK NR1800X V9.1.0u.6279_B20210910 was discovered to contain an authenticated stack overflow via the text parameter in the setSmsCfg function.

PostgreSQL versions 10.x before 10.9 and versions 11.x before 11.4 are vulnerable to a stack-based buffer overflow. Any authenticated user can overflow a stack-based buffer by changing the user's own password to a purpose-crafted value. This often suffices to execute arbitrary code as the PostgreSQL operating system account.

A vulnerability has been identified in APOGEE MBC (PPC) (BACnet) (All versions), APOGEE MBC (PPC) (P2 Ethernet) (All versions), APOGEE MEC (PPC) (BACnet) (All versions), APOGEE MEC (PPC) (P2 Ethernet) (All versions), APOGEE PXC Compact (BACnet) (All versions < V3.5.4), APOGEE PXC Compact (P2 Ethernet) (All versions < V2.8.19), APOGEE PXC Modular (BACnet) (All versions < V3.5.4), APOGEE PXC Modular (P2 Ethernet) (All versions < V2.8.19), Desigo PXC00-E.D (All versions >= V2.3 and < V6.30.016), Desigo PXC00-U (All versions >= V2.3 and < V6.30.016), Desigo PXC001-E.D (All versions >= V2.3 and < V6.30.016), Desigo PXC100-E.D (All versions >= V2.3 and < V6.30.016), Desigo PXC12-E.D (All versions >= V2.3 and < V6.30.016), Desigo PXC128-U (All versions >= V2.3 and < V6.30.016), Desigo PXC200-E.D (All versions >= V2.3 and < V6.30.016), Desigo PXC22-E.D (All versions >= V2.3 and < V6.30.016), Desigo PXC22.1-E.D (All versions >= V2.3 and < V6.30.016), Desigo PXC36.1-E.D (All versions >= V2.3 and < V6.30.016), Desigo PXC50-E.D (All versions >= V2.3 and < V6.30.016), Desigo PXC64-U (All versions >= V2.3 and < V6.30.016), Desigo PXM20-E (All versions >= V2.3 and < V6.30.016), Nucleus NET (All versions), Nucleus ReadyStart V3 (All versions < V2017.02.4), Nucleus Source Code (All versions), TALON TC Compact (BACnet) (All versions < V3.5.4), TALON TC Modular (BACnet) (All versions < V3.5.4). FTP server does not properly validate the length of the “MKD/XMKD” command, leading to stack-based buffer overflows. This may result in Denial-of-Service conditions and Remote Code Execution. (FSMD-2021-0018)

Stack-based buffer overflow in the ej_update_variables function in router/httpd/web.c on ASUS routers (when using software from https://github.com/RMerl/asuswrt-merlin) allows web authenticated attackers to execute code via a request that updates a setting. In ej_update_variables, the length of the variable action_script is not checked, as long as it includes a "_wan_if" substring.

An exploitable buffer overflow vulnerability exists in the /cameras/XXXX/clips handler of video-core's HTTP server of Samsung SmartThings Hub STH-ETH-250 - Firmware version 0.20.17. The video-core process incorrectly extracts fields from a user-controlled JSON payload, leading to a buffer overflow on the stack. An attacker can send an HTTP request to trigger this vulnerability.

A vulnerability was found in Tenda FH1206 1.2.0.8. It has been declared as critical. Affected by this vulnerability is the function fromSafeClientFilter/fromSafeMacFilter/fromSafeUrlFilter. The manipulation leads to stack-based buffer overflow. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in Tenda FH1206 1.2.0.8(8155). It has been classified as critical. Affected is the function fromqossetting of the file /goform/qossetting. The manipulation of the argument page leads to stack-based buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability classified as critical has been found in Tenda A301 15.13.08.12. This affects the function formWifiBasicSet of the file /goform/WifiBasicSet. The manipulation of the argument security leads to stack-based buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability classified as critical has been found in Tenda O6 1.0.0.7(2054). Affected is the function fromVirtualSet of the file /goform/setPortForward. The manipulation of the argument ip/localPort/publicPort/app leads to stack-based buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.