An OS Command Injection vulnerability in Kiloview NDI allows a low-privileged user to execute arbitrary code remotely on the device with high privileges. This issue affects Kiloview NDI N3, N3-s, N4, N20, N30, N40 and was fixed in Firmware version 2.02.0227 .

A vulnerability classified as critical has been found in Linksys RE6500, RE6250, RE6300, RE6350, RE7000 and RE9000 1.0.013.001/1.0.04.001/1.0.04.002/1.1.05.003/1.2.07.001. This affects the function NTP of the file /goform/NTP. The manipulation of the argument manual_year_select/manual_month_select/manual_day_select/manual_hour_select/manual_min_select/manual_sec_select leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

Multiple improper neutralization of special elements used in a command vulnerabilities [CWE-77] in FortiWeb management interface 6.4.1 and below, 6.3.15 and below, 6.2.5 and below may allow an authenticated attacker to execute unauthorized code or commands via crafted parameters of HTTP requests.

An OS command injection vulnerability in the Palo Alto Networks PAN-OS web interface enables an authenticated administrator with permissions to use XML API the ability to execute arbitrary OS commands to escalate privileges. This issue impacts: PAN-OS 8.1 versions earlier than PAN-OS 8.1.20-h1; PAN-OS 9.0 versions earlier than PAN-OS 9.0.14-h3; PAN-OS 9.1 versions earlier than PAN-OS 9.1.11-h2; PAN-OS 10.0 versions earlier than PAN-OS 10.0.8; PAN-OS 10.1 versions earlier than PAN-OS 10.1.3. This issue does not impact Prisma Access firewalls.

A Improper neutralization of special elements used in a command ('Command Injection') in Fortinet FortiWeb version 6.3.13 and below allows attacker to execute unauthorized code or commands via crafted HTTP requests

Multiple OS command injection vulnerabilities exist in the formPingCmd functionality of Planet WGR-500 v1.3411b190912. A specially crafted series of HTTP requests can lead to arbitrary command execution. An attacker can send a series of HTTP requests to trigger these vulnerabilities.This command injection is related to the `ipaddr` request parameter.

Multiple vulnerabilities in the web management interface of Cisco Firepower Management Center (FMC) Software could allow an authenticated, remote attacker to execute arbitrary commands on the underlying operating system. The attacker would need valid device credentials but does not require administrator privileges to exploit this vulnerability. These vulnerabilities are due to insufficient validation of user-supplied input for certain configuration options. An attacker could exploit these vulnerabilities by using crafted input within the device configuration GUI. A successful exploit could allow the attacker to execute arbitrary commands on the device including the underlying operating system which could also affect the availability of the device.

There is a command injection vulnerability in ZTE MF258 Pro product. Due to insufficient validation of Ping Diagnosis interface parameter, an authenticated attacker could use the vulnerability to execute arbitrary commands.

Improper Neutralization of Special Elements used in a Command ('Command Injection') vulnerability through an url parameter of an authenticated enpoint in Enphase IQ Gateway (formerly known as Envoy) allows OS Command Injection.This issue affects Envoy: from 4.x to 8.x and < 8.2.4225.

A improper neutralization of special elements used in an os command ('os command injection') vulnerability in Fortinet FortiSandbox 4.4.0 through 4.4.3, FortiSandbox 4.2.1 through 4.2.6, FortiSandbox 4.0.0 through 4.0.4 allows attacker to execute unauthorized code or commands via crafted requests..

Cursor is a code editor built for programming with AI. In versions 1.2.4 and below, attackers can achieve remote and persistent code execution by modifying an already trusted MCP configuration file inside a shared GitHub repository or editing the file locally on the target's machine. Once a collaborator accepts a harmless MCP, the attacker can silently swap it for a malicious command (e.g., calc.exe) without triggering any warning or re-prompt. If an attacker has write permissions on a user's active branches of a source repository that contains existing MCP servers the user has previously approved, or allows an attacker has arbitrary file-write locally, the attacker can achieve arbitrary code execution. This is fixed in version 1.3.

An Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability [CWE-78] vulnerability in Fortinet FortiSandbox 5.0.0 through 5.0.2, FortiSandbox 4.4.0 through 4.4.7, FortiSandbox 4.2 all versions, FortiSandbox 4.0 all versions may allow an authenticated attacker to execute unauthorized code on the underlying system via crafted HTTP requests.

An OS command injection vulnerability in the Palo Alto Networks PAN-OS web interface enables an authenticated administrator to execute arbitrary OS commands to escalate privileges. This issue impacts: PAN-OS 9.0 version 9.0.10 through PAN-OS 9.0.14; PAN-OS 9.1 version 9.1.4 through PAN-OS 9.1.10; PAN-OS 10.0 version 10.0.7 and earlier PAN-OS 10.0 versions; PAN-OS 10.1 version 10.1.0 through PAN-OS 10.1.1. Prisma Access firewalls and firewalls running PAN-OS 8.1 versions are not impacted by this issue.

An OS command injection vulnerability has been reported to affect several QNAP operating system versions. If exploited, the vulnerability could allow authenticated users to execute commands via a network. We have already fixed the vulnerability in the following versions: QTS 5.1.6.2722 build 20240402 and later QuTS hero h5.1.6.2734 build 20240414 and later

A improper neutralization of special elements used in an os command ('os command injection') vulnerability in Fortinet FortiSandbox 4.4.0 through 4.4.3, FortiSandbox 4.2.1 through 4.2.6, FortiSandbox 4.0.0 through 4.0.4 allows attacker to execute unauthorized code or commands via crafted requests..

A remote arbitrary command execution vulnerability was discovered in Aruba ClearPass Policy Manager version(s) prior to 6.9.5, 6.8.9, 6.7.14-HF1. Aruba has released patches for Aruba ClearPass Policy Manager that address this security vulnerability.

A command injection vulnerability has been reported to affect certain versions of Video Station. If exploited, this vulnerability allows remote attackers to execute arbitrary commands. This issue affects: QNAP Systems Inc. Video Station versions prior to 5.5.4 on QTS 4.5.2; versions prior to 5.5.4 on QuTS hero h4.5.2; versions prior to 5.5.4 on QuTScloud c4.5.4. This issue does not affect: QNAP Systems Inc. Video Station on QTS 4.3.6; on QTS 4.3.3.

applications/luci-app-ddns/luasrc/model/cbi/ddns/detail.lua in the DDNS package for OpenWrt 19.07 allows remote authenticated users to inject arbitrary commands via POST requests.

Dokploy is a self-hostable Platform as a Service (PaaS) that simplifies the deployment and management of applications and databases. An authenticated, low-privileged user can run arbitrary OS commands on the Dokploy host. The tRPC procedure docker.getContainersByAppNameMatch interpolates the attacker-supplied appName value into a Docker CLI call without sanitisation, enabling command injection under the Dokploy service account. This vulnerability is fixed in 0.23.7.

prog.cgi on D-Link DIR-3060 devices before 1.11b04 HF2 allows remote authenticated users to inject arbitrary commands in an admin or root context because SetVirtualServerSettings calls CheckArpTables, which calls popen unsafely.

Endian Firewall Community (aka EFW) 3.3.2 allows remote authenticated users to execute arbitrary OS commands via shell metacharacters in a backup comment.

NeDi 1.9C allows an authenticated user to execute operating system commands in the Nodes Traffic function on the endpoint /Nodes-Traffic.php via the md or ag HTTP GET parameter. This allows an attacker to obtain access to the operating system where NeDi is installed and to all application data.

OPNsense before 25.1.8 contains an authenticated command injection vulnerability in its Bridge Interface Edit endpoint (interfaces_bridge_edit.php). The span POST parameter is concatenated into a system-level command without proper sanitization or escaping, allowing an administrator to inject arbitrary shell operators and payloads. Successful exploitation results in remote code execution with the privileges of the web service (typically root), potentially leading to full system compromise or lateral movement. This vulnerability arises from inadequate input validation and improper handling of user-supplied data in backend command invocations.

Certain ASUS WiFi routers models has an OS Command Injection vulnerability, allowing an authenticated remote attacker to execute arbitrary system commands by sending a specially crafted request.

An improper neutralization of special elements used in an OS command vulnerability in the command line interpreter of FortiAuthenticator before 6.3.1 may allow an authenticated attacker to execute unauthorized commands via specifically crafted arguments to existing commands.

Nagios XI version xi-5.7.5 is affected by OS command injection. The vulnerability exists in the file /usr/local/nagiosxi/html/includes/configwizards/switch/switch.inc.php due to improper sanitization of authenticated user-controlled input by a single HTTP request, which can lead to OS command injection on the Nagios XI server.

RUCKUS SmartZone (SZ) before 6.1.2p3 Refresh Build allows OS command injection via a certain parameter in an API route.

Nagios XI versions prior to 2024R1.2 contain a command injection vulnerability in the Docker Wizard. Insufficient validation of user-supplied input in the wizard allows an authenticated administrator to inject shell metacharacters that are incorporated into backend command invocations. Successful exploitation enables arbitrary command execution with the privileges of the Nagios XI web application user.

An OS command injection vulnerability has been reported to affect several QNAP operating system versions. If exploited, the vulnerability could allow authenticated users to execute commands via a network. We have already fixed the vulnerability in the following versions: QTS 5.1.4.2596 build 20231128 and later QTS 4.5.4.2627 build 20231225 and later QuTS hero h5.1.4.2596 build 20231128 and later QuTS hero h4.5.4.2626 build 20231225 and later QuTScloud c5.1.5.2651 and later

A remote unauthorized access vulnerability was discovered in Aruba AirWave Management Platform version(s) prior to 8.2.12.1. Aruba has released patches for AirWave Management Platform that address this security vulnerability.

Nagios XI version xi-5.7.5 is affected by OS command injection. The vulnerability exists in the file /usr/local/nagiosxi/html/includes/configwizards/cloud-vm/cloud-vm.inc.php due to improper sanitization of authenticated user-controlled input by a single HTTP request, which can lead to OS command injection on the Nagios XI server.

An improper neutralization of special elements used in an OS Command vulnerability in FortiSandbox 3.2.0 through 3.2.2, 3.1.0 through 3.1.4, and 3.0.0 through 3.0.6 may allow an authenticated attacker with access to the web GUI to execute unauthorized code or commands via specifically crafted HTTP requests.

A vulnerability was found in Roxy-WI up to 8.1.3. It has been declared as critical. Affected by this vulnerability is the function action_service of the file app/modules/roxywi/roxy.py. The manipulation of the argument action/service leads to os command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 8.1.4 is able to address this issue. The identifier of the patch is 32313928eb9ce906887b8a30bf7b9a3d5c0de1be. It is recommended to upgrade the affected component.

A remote execution of arbitrary commands vulnerability was discovered in some Aruba Instant Access Point (IAP) products in version(s): Aruba Instant 6.5.x: 6.5.4.17 and below; Aruba Instant 8.3.x: 8.3.0.13 and below; Aruba Instant 8.5.x: 8.5.0.10 and below; Aruba Instant 8.6.x: 8.6.0.4 and below. Aruba has released patches for Aruba Instant that address this security vulnerability.

Arista NG Firewall ExecManagerImpl Command Injection Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of Arista NG Firewall. Authentication is required to exploit this vulnerability. The specific flaw exists within the ExecManagerImpl class. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-24015.

Webmin CGI Command Injection Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of Webmin. Authentication is required to exploit this vulnerability. The specific flaw exists within the handling of CGI requests. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-22346.

The administration web interface on Belkin Linksys WRT160NL 1.0.04.002_US_20130619 devices allows remote authenticated attackers to execute system commands with root privileges via shell metacharacters in the ui_language POST parameter to the apply.cgi form endpoint. This occurs in do_upgrade_post in mini_httpd. NOTE: This vulnerability only affects products that are no longer supported by the maintaine

XStream before version 1.4.14 is vulnerable to Remote Code Execution.The vulnerability may allow a remote attacker to run arbitrary shell commands only by manipulating the processed input stream. Only users who rely on blocklists are affected. Anyone using XStream's Security Framework allowlist is not affected. The linked advisory provides code workarounds for users who cannot upgrade. The issue is fixed in version 1.4.14.

In the web management interface in Foscam C1 Indoor HD cameras with application firmware 2.52.2.37, a specially crafted HTTP request can allow for a user to inject arbitrary shell characters during manual network configuration resulting in command injection. An attacker can simply send an HTTP request to the device to trigger this vulnerability.

HAX CMS PHP allows users to manage their microsite universe with a PHP backend. Prior to version 11.0.3, the `gitImportSite` functionality obtains a URL string from a POST request and insufficiently validates user input. The `set_remote` function later passes this input into `proc_open`, yielding OS command injection. An authenticated attacker can craft a URL string that bypasses the validation checks employed by the `filter_var` and `strpos` functions in order to execute arbitrary OS commands on the backend server. The attacker can exfiltrate command output via an HTTP request. Version 11.0.3 contains a patch for the issue.

Jenkins Perfecto Plugin 1.17 and earlier executes a command on the Jenkins controller, allowing attackers with Job/Configure permission to run arbitrary commands on the Jenkins controller

Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability in Microchip Time Provider 4100 allows OS Command Injection.This issue affects Time Provider 4100: before 2.5.

Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability in Microchip Time Provider 4100 allows OS Command Injection.This issue affects Time Provider 4100: before 2.5.

The airPASS from NetVision Information has an OS Command Injection vulnerability, allowing remote attackers with regular privileges to inject and execute arbitrary OS commands.

This vulnerability allows remote attackers to execute arbitrary code on affected installations of Microhard Bullet-LTE prior to v1.2.0-r1112. Authentication is required to exploit this vulnerability. The specific flaw exists within the handling of the ping parameter provided to tools.sh. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-10595.

The WordPress PDF Light Viewer Plugin WordPress plugin before 1.4.12 allows users with Author roles to execute arbitrary OS command on the server via OS Command Injection when invoking Ghostscript.

A vulnerability has been found in TOTOLINK AC1200 T8 4.1.5cu.861_B20230220 and classified as critical. This vulnerability affects the function setParentalRules of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument slaveIpList leads to os command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in DedeCMS up to 5.7.115. It has been rated as critical. This issue affects some unknown processing of the file /dede/article_string_mix.php. The manipulation leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

An attacker with authenticated access to VICIdial as an "agent" can execute arbitrary shell commands as the "root" user. This attack can be chained with CVE-2024-8503 to execute arbitrary shell commands starting from an unauthenticated perspective.

An issue was discovered on D-Link DWR-116 through 1.06, DWR-512 through 2.02, DWR-712 through 2.02, DWR-912 through 2.02, DWR-921 through 2.02, and DWR-111 through 1.01 devices. An authenticated attacker may execute arbitrary code by injecting the shell command into the chkisg.htm page Sip parameter. This allows for full control over the device internals.