A memory leak in the alloc_sgtable() function in drivers/net/wireless/intel/iwlwifi/fw/dbg.c in the Linux kernel through 5.3.11 allows attackers to cause a denial of service (memory consumption) by triggering alloc_page() failures, aka CID-b4b814fec1a5.

A NULL pointer dereference flaw was found in the Linux kernel’s Amateur Radio AX.25 protocol functionality in the way a user connects with the protocol. This flaw allows a local user to crash the system.

In the Linux kernel, the following vulnerability has been resolved: isdn: mISDN: netjet: Fix crash in nj_probe: 'nj_setup' in netjet.c might fail with -EIO and in this case 'card->irq' is initialized and is bigger than zero. A subsequent call to 'nj_release' will free the irq that has not been requested. Fix this bug by deleting the previous assignment to 'card->irq' and just keep the assignment before 'request_irq'. The KASAN's log reveals it: [ 3.354615 ] WARNING: CPU: 0 PID: 1 at kernel/irq/manage.c:1826 free_irq+0x100/0x480 [ 3.355112 ] Modules linked in: [ 3.355310 ] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.13.0-rc1-00144-g25a1298726e #13 [ 3.355816 ] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014 [ 3.356552 ] RIP: 0010:free_irq+0x100/0x480 [ 3.356820 ] Code: 6e 08 74 6f 4d 89 f4 e8 5e ac 09 00 4d 8b 74 24 18 4d 85 f6 75 e3 e8 4f ac 09 00 8b 75 c8 48 c7 c7 78 c1 2e 85 e8 e0 cf f5 ff <0f> 0b 48 8b 75 c0 4c 89 ff e8 72 33 0b 03 48 8b 43 40 4c 8b a0 80 [ 3.358012 ] RSP: 0000:ffffc90000017b48 EFLAGS: 00010082 [ 3.358357 ] RAX: 0000000000000000 RBX: ffff888104dc8000 RCX: 0000000000000000 [ 3.358814 ] RDX: ffff8881003c8000 RSI: ffffffff8124a9e6 RDI: 00000000ffffffff [ 3.359272 ] RBP: ffffc90000017b88 R08: 0000000000000000 R09: 0000000000000000 [ 3.359732 ] R10: ffffc900000179f0 R11: 0000000000001d04 R12: 0000000000000000 [ 3.360195 ] R13: ffff888107dc6000 R14: ffff888107dc6928 R15: ffff888104dc80a8 [ 3.360652 ] FS: 0000000000000000(0000) GS:ffff88817bc00000(0000) knlGS:0000000000000000 [ 3.361170 ] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 3.361538 ] CR2: 0000000000000000 CR3: 000000000582e000 CR4: 00000000000006f0 [ 3.362003 ] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 3.362175 ] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 3.362175 ] Call Trace: [ 3.362175 ] nj_release+0x51/0x1e0 [ 3.362175 ] nj_probe+0x450/0x950 [ 3.362175 ] ? pci_device_remove+0x110/0x110 [ 3.362175 ] local_pci_probe+0x45/0xa0 [ 3.362175 ] pci_device_probe+0x12b/0x1d0 [ 3.362175 ] really_probe+0x2a9/0x610 [ 3.362175 ] driver_probe_device+0x90/0x1d0 [ 3.362175 ] ? mutex_lock_nested+0x1b/0x20 [ 3.362175 ] device_driver_attach+0x68/0x70 [ 3.362175 ] __driver_attach+0x124/0x1b0 [ 3.362175 ] ? device_driver_attach+0x70/0x70 [ 3.362175 ] bus_for_each_dev+0xbb/0x110 [ 3.362175 ] ? rdinit_setup+0x45/0x45 [ 3.362175 ] driver_attach+0x27/0x30 [ 3.362175 ] bus_add_driver+0x1eb/0x2a0 [ 3.362175 ] driver_register+0xa9/0x180 [ 3.362175 ] __pci_register_driver+0x82/0x90 [ 3.362175 ] ? w6692_init+0x38/0x38 [ 3.362175 ] nj_init+0x36/0x38 [ 3.362175 ] do_one_initcall+0x7f/0x3d0 [ 3.362175 ] ? rdinit_setup+0x45/0x45 [ 3.362175 ] ? rcu_read_lock_sched_held+0x4f/0x80 [ 3.362175 ] kernel_init_freeable+0x2aa/0x301 [ 3.362175 ] ? rest_init+0x2c0/0x2c0 [ 3.362175 ] kernel_init+0x18/0x190 [ 3.362175 ] ? rest_init+0x2c0/0x2c0 [ 3.362175 ] ? rest_init+0x2c0/0x2c0 [ 3.362175 ] ret_from_fork+0x1f/0x30 [ 3.362175 ] Kernel panic - not syncing: panic_on_warn set ... [ 3.362175 ] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.13.0-rc1-00144-g25a1298726e #13 [ 3.362175 ] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014 [ 3.362175 ] Call Trace: [ 3.362175 ] dump_stack+0xba/0xf5 [ 3.362175 ] ? free_irq+0x100/0x480 [ 3.362175 ] panic+0x15a/0x3f2 [ 3.362175 ] ? __warn+0xf2/0x150 [ 3.362175 ] ? free_irq+0x100/0x480 [ 3.362175 ] __warn+0x108/0x150 [ 3.362175 ] ? free_irq+0x100/0x480 [ 3.362175 ] report_bug+0x119/0x1c0 [ 3.362175 ] handle_bug+0x3b/0x80 [ 3.362175 ] exc_invalid_op+0x18/0x70 [ 3.362175 ] asm_exc_invalid_op+0x12/0x20 [ 3.362175 ] RIP: 0010:free_irq+0x100 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: dm: fix mempool NULL pointer race when completing IO dm_io_dec_pending() calls end_io_acct() first and will then dec md in-flight pending count. But if a task is swapping DM table at same time this can result in a crash due to mempool->elements being NULL: task1 task2 do_resume ->do_suspend ->dm_wait_for_completion bio_endio ->clone_endio ->dm_io_dec_pending ->end_io_acct ->wakeup task1 ->dm_swap_table ->__bind ->__bind_mempools ->bioset_exit ->mempool_exit ->free_io [ 67.330330] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 ...... [ 67.330494] pstate: 80400085 (Nzcv daIf +PAN -UAO) [ 67.330510] pc : mempool_free+0x70/0xa0 [ 67.330515] lr : mempool_free+0x4c/0xa0 [ 67.330520] sp : ffffff8008013b20 [ 67.330524] x29: ffffff8008013b20 x28: 0000000000000004 [ 67.330530] x27: ffffffa8c2ff40a0 x26: 00000000ffff1cc8 [ 67.330535] x25: 0000000000000000 x24: ffffffdada34c800 [ 67.330541] x23: 0000000000000000 x22: ffffffdada34c800 [ 67.330547] x21: 00000000ffff1cc8 x20: ffffffd9a1304d80 [ 67.330552] x19: ffffffdada34c970 x18: 000000b312625d9c [ 67.330558] x17: 00000000002dcfbf x16: 00000000000006dd [ 67.330563] x15: 000000000093b41e x14: 0000000000000010 [ 67.330569] x13: 0000000000007f7a x12: 0000000034155555 [ 67.330574] x11: 0000000000000001 x10: 0000000000000001 [ 67.330579] x9 : 0000000000000000 x8 : 0000000000000000 [ 67.330585] x7 : 0000000000000000 x6 : ffffff80148b5c1a [ 67.330590] x5 : ffffff8008013ae0 x4 : 0000000000000001 [ 67.330596] x3 : ffffff80080139c8 x2 : ffffff801083bab8 [ 67.330601] x1 : 0000000000000000 x0 : ffffffdada34c970 [ 67.330609] Call trace: [ 67.330616] mempool_free+0x70/0xa0 [ 67.330627] bio_put+0xf8/0x110 [ 67.330638] dec_pending+0x13c/0x230 [ 67.330644] clone_endio+0x90/0x180 [ 67.330649] bio_endio+0x198/0x1b8 [ 67.330655] dec_pending+0x190/0x230 [ 67.330660] clone_endio+0x90/0x180 [ 67.330665] bio_endio+0x198/0x1b8 [ 67.330673] blk_update_request+0x214/0x428 [ 67.330683] scsi_end_request+0x2c/0x300 [ 67.330688] scsi_io_completion+0xa0/0x710 [ 67.330695] scsi_finish_command+0xd8/0x110 [ 67.330700] scsi_softirq_done+0x114/0x148 [ 67.330708] blk_done_softirq+0x74/0xd0 [ 67.330716] __do_softirq+0x18c/0x374 [ 67.330724] irq_exit+0xb4/0xb8 [ 67.330732] __handle_domain_irq+0x84/0xc0 [ 67.330737] gic_handle_irq+0x148/0x1b0 [ 67.330744] el1_irq+0xe8/0x190 [ 67.330753] lpm_cpuidle_enter+0x4f8/0x538 [ 67.330759] cpuidle_enter_state+0x1fc/0x398 [ 67.330764] cpuidle_enter+0x18/0x20 [ 67.330772] do_idle+0x1b4/0x290 [ 67.330778] cpu_startup_entry+0x20/0x28 [ 67.330786] secondary_start_kernel+0x160/0x170 Fix this by: 1) Establishing pointers to 'struct dm_io' members in dm_io_dec_pending() so that they may be passed into end_io_acct() _after_ free_io() is called. 2) Moving end_io_acct() after free_io().

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix race between transaction aborts and fsyncs leading to use-after-free There is a race between a task aborting a transaction during a commit, a task doing an fsync and the transaction kthread, which leads to an use-after-free of the log root tree. When this happens, it results in a stack trace like the following: BTRFS info (device dm-0): forced readonly BTRFS warning (device dm-0): Skipping commit of aborted transaction. BTRFS: error (device dm-0) in cleanup_transaction:1958: errno=-5 IO failure BTRFS warning (device dm-0): lost page write due to IO error on /dev/mapper/error-test (-5) BTRFS warning (device dm-0): Skipping commit of aborted transaction. BTRFS warning (device dm-0): direct IO failed ino 261 rw 0,0 sector 0xa4e8 len 4096 err no 10 BTRFS error (device dm-0): error writing primary super block to device 1 BTRFS warning (device dm-0): direct IO failed ino 261 rw 0,0 sector 0x12e000 len 4096 err no 10 BTRFS warning (device dm-0): direct IO failed ino 261 rw 0,0 sector 0x12e008 len 4096 err no 10 BTRFS warning (device dm-0): direct IO failed ino 261 rw 0,0 sector 0x12e010 len 4096 err no 10 BTRFS: error (device dm-0) in write_all_supers:4110: errno=-5 IO failure (1 errors while writing supers) BTRFS: error (device dm-0) in btrfs_sync_log:3308: errno=-5 IO failure general protection fault, probably for non-canonical address 0x6b6b6b6b6b6b6b68: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC PTI CPU: 2 PID: 2458471 Comm: fsstress Not tainted 5.12.0-rc5-btrfs-next-84 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 RIP: 0010:__mutex_lock+0x139/0xa40 Code: c0 74 19 (...) RSP: 0018:ffff9f18830d7b00 EFLAGS: 00010202 RAX: 6b6b6b6b6b6b6b68 RBX: 0000000000000001 RCX: 0000000000000002 RDX: ffffffffb9c54d13 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffff9f18830d7bc0 R08: 0000000000000000 R09: 0000000000000000 R10: ffff9f18830d7be0 R11: 0000000000000001 R12: ffff8c6cd199c040 R13: ffff8c6c95821358 R14: 00000000fffffffb R15: ffff8c6cbcf01358 FS: 00007fa9140c2b80(0000) GS:ffff8c6fac600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fa913d52000 CR3: 000000013d2b4003 CR4: 0000000000370ee0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ? __btrfs_handle_fs_error+0xde/0x146 [btrfs] ? btrfs_sync_log+0x7c1/0xf20 [btrfs] ? btrfs_sync_log+0x7c1/0xf20 [btrfs] btrfs_sync_log+0x7c1/0xf20 [btrfs] btrfs_sync_file+0x40c/0x580 [btrfs] do_fsync+0x38/0x70 __x64_sys_fsync+0x10/0x20 do_syscall_64+0x33/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7fa9142a55c3 Code: 8b 15 09 (...) RSP: 002b:00007fff26278d48 EFLAGS: 00000246 ORIG_RAX: 000000000000004a RAX: ffffffffffffffda RBX: 0000563c83cb4560 RCX: 00007fa9142a55c3 RDX: 00007fff26278cb0 RSI: 00007fff26278cb0 RDI: 0000000000000005 RBP: 0000000000000005 R08: 0000000000000001 R09: 00007fff26278d5c R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000340 R13: 00007fff26278de0 R14: 00007fff26278d96 R15: 0000563c83ca57c0 Modules linked in: btrfs dm_zero dm_snapshot dm_thin_pool (...) ---[ end trace ee2f1b19327d791d ]--- The steps that lead to this crash are the following: 1) We are at transaction N; 2) We have two tasks with a transaction handle attached to transaction N. Task A and Task B. Task B is doing an fsync; 3) Task B is at btrfs_sync_log(), and has saved fs_info->log_root_tree into a local variable named 'log_root_tree' at the top of btrfs_sync_log(). Task B is about to call write_all_supers(), but before that... 4) Task A calls btrfs_commit_transaction(), and after it sets the transaction state to TRANS_STATE_COMMIT_START, an error happens before it w ---truncated---

In the Linux kernel, the following vulnerability has been resolved: netfilter: conntrack: serialize hash resizes and cleanups Syzbot was able to trigger the following warning [1] No repro found by syzbot yet but I was able to trigger similar issue by having 2 scripts running in parallel, changing conntrack hash sizes, and: for j in `seq 1 1000` ; do unshare -n /bin/true >/dev/null ; done It would take more than 5 minutes for net_namespace structures to be cleaned up. This is because nf_ct_iterate_cleanup() has to restart everytime a resize happened. By adding a mutex, we can serialize hash resizes and cleanups and also make get_next_corpse() faster by skipping over empty buckets. Even without resizes in the picture, this patch considerably speeds up network namespace dismantles. [1] INFO: task syz-executor.0:8312 can't die for more than 144 seconds. task:syz-executor.0 state:R running task stack:25672 pid: 8312 ppid: 6573 flags:0x00004006 Call Trace: context_switch kernel/sched/core.c:4955 [inline] __schedule+0x940/0x26f0 kernel/sched/core.c:6236 preempt_schedule_common+0x45/0xc0 kernel/sched/core.c:6408 preempt_schedule_thunk+0x16/0x18 arch/x86/entry/thunk_64.S:35 __local_bh_enable_ip+0x109/0x120 kernel/softirq.c:390 local_bh_enable include/linux/bottom_half.h:32 [inline] get_next_corpse net/netfilter/nf_conntrack_core.c:2252 [inline] nf_ct_iterate_cleanup+0x15a/0x450 net/netfilter/nf_conntrack_core.c:2275 nf_conntrack_cleanup_net_list+0x14c/0x4f0 net/netfilter/nf_conntrack_core.c:2469 ops_exit_list+0x10d/0x160 net/core/net_namespace.c:171 setup_net+0x639/0xa30 net/core/net_namespace.c:349 copy_net_ns+0x319/0x760 net/core/net_namespace.c:470 create_new_namespaces+0x3f6/0xb20 kernel/nsproxy.c:110 unshare_nsproxy_namespaces+0xc1/0x1f0 kernel/nsproxy.c:226 ksys_unshare+0x445/0x920 kernel/fork.c:3128 __do_sys_unshare kernel/fork.c:3202 [inline] __se_sys_unshare kernel/fork.c:3200 [inline] __x64_sys_unshare+0x2d/0x40 kernel/fork.c:3200 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f63da68e739 RSP: 002b:00007f63d7c05188 EFLAGS: 00000246 ORIG_RAX: 0000000000000110 RAX: ffffffffffffffda RBX: 00007f63da792f80 RCX: 00007f63da68e739 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000040000000 RBP: 00007f63da6e8cc4 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f63da792f80 R13: 00007fff50b75d3f R14: 00007f63d7c05300 R15: 0000000000022000 Showing all locks held in the system: 1 lock held by khungtaskd/27: #0: ffffffff8b980020 (rcu_read_lock){....}-{1:2}, at: debug_show_all_locks+0x53/0x260 kernel/locking/lockdep.c:6446 2 locks held by kworker/u4:2/153: #0: ffff888010c69138 ((wq_completion)events_unbound){+.+.}-{0:0}, at: arch_atomic64_set arch/x86/include/asm/atomic64_64.h:34 [inline] #0: ffff888010c69138 ((wq_completion)events_unbound){+.+.}-{0:0}, at: arch_atomic_long_set include/linux/atomic/atomic-long.h:41 [inline] #0: ffff888010c69138 ((wq_completion)events_unbound){+.+.}-{0:0}, at: atomic_long_set include/linux/atomic/atomic-instrumented.h:1198 [inline] #0: ffff888010c69138 ((wq_completion)events_unbound){+.+.}-{0:0}, at: set_work_data kernel/workqueue.c:634 [inline] #0: ffff888010c69138 ((wq_completion)events_unbound){+.+.}-{0:0}, at: set_work_pool_and_clear_pending kernel/workqueue.c:661 [inline] #0: ffff888010c69138 ((wq_completion)events_unbound){+.+.}-{0:0}, at: process_one_work+0x896/0x1690 kernel/workqueue.c:2268 #1: ffffc9000140fdb0 ((kfence_timer).work){+.+.}-{0:0}, at: process_one_work+0x8ca/0x1690 kernel/workqueue.c:2272 1 lock held by systemd-udevd/2970: 1 lock held by in:imklog/6258: #0: ffff88807f970ff0 (&f->f_pos_lock){+.+.}-{3:3}, at: __fdget_pos+0xe9/0x100 fs/file.c:990 3 locks held by kworker/1:6/8158: 1 lock held by syz-executor.0/8312: 2 locks held by kworker/u4:13/9320: 1 lock held by ---truncated---

In the Linux kernel, the following vulnerability has been resolved: xprtrdma: Fix cwnd update ordering After a reconnect, the reply handler is opening the cwnd (and thus enabling more RPC Calls to be sent) /before/ rpcrdma_post_recvs() can post enough Receive WRs to receive their replies. This causes an RNR and the new connection is lost immediately. The race is most clearly exposed when KASAN and disconnect injection are enabled. This slows down rpcrdma_rep_create() enough to allow the send side to post a bunch of RPC Calls before the Receive completion handler can invoke ib_post_recv().

In the Linux kernel, the following vulnerability has been resolved: x86/sgx: Resolves SECS reclaim vs. page fault for EAUG race The SGX EPC reclaimer (ksgxd) may reclaim the SECS EPC page for an enclave and set secs.epc_page to NULL. The SECS page is used for EAUG and ELDU in the SGX page fault handler. However, the NULL check for secs.epc_page is only done for ELDU, not EAUG before being used. Fix this by doing the same NULL check and reloading of the SECS page as needed for both EAUG and ELDU. The SECS page holds global enclave metadata. It can only be reclaimed when there are no other enclave pages remaining. At that point, virtually nothing can be done with the enclave until the SECS page is paged back in. An enclave can not run nor generate page faults without a resident SECS page. But it is still possible for a #PF for a non-SECS page to race with paging out the SECS page: when the last resident non-SECS page A triggers a #PF in a non-resident page B, and then page A and the SECS both are paged out before the #PF on B is handled. Hitting this bug requires that race triggered with a #PF for EAUG. Following is a trace when it happens. BUG: kernel NULL pointer dereference, address: 0000000000000000 RIP: 0010:sgx_encl_eaug_page+0xc7/0x210 Call Trace: ? __kmem_cache_alloc_node+0x16a/0x440 ? xa_load+0x6e/0xa0 sgx_vma_fault+0x119/0x230 __do_fault+0x36/0x140 do_fault+0x12f/0x400 __handle_mm_fault+0x728/0x1110 handle_mm_fault+0x105/0x310 do_user_addr_fault+0x1ee/0x750 ? __this_cpu_preempt_check+0x13/0x20 exc_page_fault+0x76/0x180 asm_exc_page_fault+0x27/0x30

A null pointer dereference flaw was found in the Linux kernel API for the cryptographic algorithm scatterwalk functionality. This issue occurs when a user constructs a malicious packet with specific socket configuration, which could allow a local user to crash the system or escalate their privileges on the system.

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix race between quota rescan and disable leading to NULL pointer deref If we have one task trying to start the quota rescan worker while another one is trying to disable quotas, we can end up hitting a race that results in the quota rescan worker doing a NULL pointer dereference. The steps for this are the following: 1) Quotas are enabled; 2) Task A calls the quota rescan ioctl and enters btrfs_qgroup_rescan(). It calls qgroup_rescan_init() which returns 0 (success) and then joins a transaction and commits it; 3) Task B calls the quota disable ioctl and enters btrfs_quota_disable(). It clears the bit BTRFS_FS_QUOTA_ENABLED from fs_info->flags and calls btrfs_qgroup_wait_for_completion(), which returns immediately since the rescan worker is not yet running. Then it starts a transaction and locks fs_info->qgroup_ioctl_lock; 4) Task A queues the rescan worker, by calling btrfs_queue_work(); 5) The rescan worker starts, and calls rescan_should_stop() at the start of its while loop, which results in 0 iterations of the loop, since the flag BTRFS_FS_QUOTA_ENABLED was cleared from fs_info->flags by task B at step 3); 6) Task B sets fs_info->quota_root to NULL; 7) The rescan worker tries to start a transaction and uses fs_info->quota_root as the root argument for btrfs_start_transaction(). This results in a NULL pointer dereference down the call chain of btrfs_start_transaction(). The stack trace is something like the one reported in Link tag below: general protection fault, probably for non-canonical address 0xdffffc0000000041: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000208-0x000000000000020f] CPU: 1 PID: 34 Comm: kworker/u4:2 Not tainted 6.1.0-syzkaller-13872-gb6bb9676f216 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022 Workqueue: btrfs-qgroup-rescan btrfs_work_helper RIP: 0010:start_transaction+0x48/0x10f0 fs/btrfs/transaction.c:564 Code: 48 89 fb 48 (...) RSP: 0018:ffffc90000ab7ab0 EFLAGS: 00010206 RAX: 0000000000000041 RBX: 0000000000000208 RCX: ffff88801779ba80 RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000000 RBP: dffffc0000000000 R08: 0000000000000001 R09: fffff52000156f5d R10: fffff52000156f5d R11: 1ffff92000156f5c R12: 0000000000000000 R13: 0000000000000001 R14: 0000000000000001 R15: 0000000000000003 FS: 0000000000000000(0000) GS:ffff8880b9900000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f2bea75b718 CR3: 000000001d0cc000 CR4: 00000000003506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> btrfs_qgroup_rescan_worker+0x3bb/0x6a0 fs/btrfs/qgroup.c:3402 btrfs_work_helper+0x312/0x850 fs/btrfs/async-thread.c:280 process_one_work+0x877/0xdb0 kernel/workqueue.c:2289 worker_thread+0xb14/0x1330 kernel/workqueue.c:2436 kthread+0x266/0x300 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:308 </TASK> Modules linked in: So fix this by having the rescan worker function not attempt to start a transaction if it didn't do any rescan work.

In the Linux kernel, the following vulnerability has been resolved: xhci: Fix null pointer dereference when host dies Make sure xhci_free_dev() and xhci_kill_endpoint_urbs() do not race and cause null pointer dereference when host suddenly dies. Usb core may call xhci_free_dev() which frees the xhci->devs[slot_id] virt device at the same time that xhci_kill_endpoint_urbs() tries to loop through all the device's endpoints, checking if there are any cancelled urbs left to give back. hold the xhci spinlock while freeing the virt device

In the Linux kernel, the following vulnerability has been resolved: phy: lynx-28g: serialize concurrent phy_set_mode_ext() calls to shared registers The protocol converter configuration registers PCC8, PCCC, PCCD (implemented by the driver), as well as others, control protocol converters from multiple lanes (each represented as a different struct phy). So, if there are simultaneous calls to phy_set_mode_ext() to lanes sharing the same PCC register (either for the "old" or for the "new" protocol), corruption of the values programmed to hardware is possible, because lynx_28g_rmw() has no locking. Add a spinlock in the struct lynx_28g_priv shared by all lanes, and take the global spinlock from the phy_ops :: set_mode() implementation. There are no other callers which modify PCC registers.

Race condition in ip_vs_conn_flush in Linux 2.6 before 2.6.13 and 2.4 before 2.4.32-pre2, when running on SMP systems, allows local users to cause a denial of service (null dereference) by causing a connection timer to expire while the connection table is being flushed before the appropriate lock is acquired.

In the Linux kernel, the following vulnerability has been resolved: nfsd: fix handling of cached open files in nfsd4_open codepath Commit fb70bf124b05 ("NFSD: Instantiate a struct file when creating a regular NFSv4 file") added the ability to cache an open fd over a compound. There are a couple of problems with the way this currently works: It's racy, as a newly-created nfsd_file can end up with its PENDING bit cleared while the nf is hashed, and the nf_file pointer is still zeroed out. Other tasks can find it in this state and they expect to see a valid nf_file, and can oops if nf_file is NULL. Also, there is no guarantee that we'll end up creating a new nfsd_file if one is already in the hash. If an extant entry is in the hash with a valid nf_file, nfs4_get_vfs_file will clobber its nf_file pointer with the value of op_file and the old nf_file will leak. Fix both issues by making a new nfsd_file_acquirei_opened variant that takes an optional file pointer. If one is present when this is called, we'll take a new reference to it instead of trying to open the file. If the nfsd_file already has a valid nf_file, we'll just ignore the optional file and pass the nfsd_file back as-is. Also rework the tracepoints a bit to allow for an "opened" variant and don't try to avoid counting acquisitions in the case where we already have a cached open file.

Race condition in Linux 2.6, when threads are sharing memory mapping via CLONE_VM (such as linuxthreads and vfork), might allow local users to cause a denial of service (deadlock) by triggering a core dump while waiting for a thread that has just performed an exec.

In the Linux kernel, the following vulnerability has been resolved: i2c: sprd: fix reference leak when pm_runtime_get_sync fails The PM reference count is not expected to be incremented on return in sprd_i2c_master_xfer() and sprd_i2c_remove(). However, pm_runtime_get_sync will increment the PM reference count even failed. Forgetting to putting operation will result in a reference leak here. Replace it with pm_runtime_resume_and_get to keep usage counter balanced.

A vulnerability was found in Linux kernel, where a use-after-frees in nouveau's postclose() handler could happen if removing device (that is not common to remove video card physically without power-off, but same happens if "unbind" the driver).

In the Linux kernel, the following vulnerability has been resolved: drm/vmwgfx: Prevent unmapping active read buffers The kms paths keep a persistent map active to read and compare the cursor buffer. These maps can race with each other in simple scenario where: a) buffer "a" mapped for update b) buffer "a" mapped for compare c) do the compare d) unmap "a" for compare e) update the cursor f) unmap "a" for update At step "e" the buffer has been unmapped and the read contents is bogus. Prevent unmapping of active read buffers by simply keeping a count of how many paths have currently active maps and unmap only when the count reaches 0.

In the Linux kernel, the following vulnerability has been resolved: pds_core: Prevent race issues involving the adminq There are multiple paths that can result in using the pdsc's adminq. [1] pdsc_adminq_isr and the resulting work from queue_work(), i.e. pdsc_work_thread()->pdsc_process_adminq() [2] pdsc_adminq_post() When the device goes through reset via PCIe reset and/or a fw_down/fw_up cycle due to bad PCIe state or bad device state the adminq is destroyed and recreated. A NULL pointer dereference can happen if [1] or [2] happens after the adminq is already destroyed. In order to fix this, add some further state checks and implement reference counting for adminq uses. Reference counting was used because multiple threads can attempt to access the adminq at the same time via [1] or [2]. Additionally, multiple clients (i.e. pds-vfio-pci) can be using [2] at the same time. The adminq_refcnt is initialized to 1 when the adminq has been allocated and is ready to use. Users/clients of the adminq (i.e. [1] and [2]) will increment the refcnt when they are using the adminq. When the driver goes into a fw_down cycle it will set the PDSC_S_FW_DEAD bit and then wait for the adminq_refcnt to hit 1. Setting the PDSC_S_FW_DEAD before waiting will prevent any further adminq_refcnt increments. Waiting for the adminq_refcnt to hit 1 allows for any current users of the adminq to finish before the driver frees the adminq. Once the adminq_refcnt hits 1 the driver clears the refcnt to signify that the adminq is deleted and cannot be used. On the fw_up cycle the driver will once again initialize the adminq_refcnt to 1 allowing the adminq to be used again.

An issue was discovered in the Linux kernel through 6.5.9. During a race with SQ thread exit, an io_uring/fdinfo.c io_uring_show_fdinfo NULL pointer dereference can occur.

In the Linux kernel, the following vulnerability has been resolved: platform/x86: dell-uart-backlight: fix serdev race The dell_uart_bl_serdev_probe() function calls devm_serdev_device_open() before setting the client ops via serdev_device_set_client_ops(). This ordering can trigger a NULL pointer dereference in the serdev controller's receive_buf handler, as it assumes serdev->ops is valid when SERPORT_ACTIVE is set. This is similar to the issue fixed in commit 5e700b384ec1 ("platform/chrome: cros_ec_uart: properly fix race condition") where devm_serdev_device_open() was called before fully initializing the device. Fix the race by ensuring client ops are set before enabling the port via devm_serdev_device_open(). Note, serdev_device_set_baudrate() and serdev_device_set_flow_control() calls should be after the devm_serdev_device_open() call.

In the Linux kernel, the following vulnerability has been resolved: firmware: qcom: uefisecapp: fix efivars registration race Since the conversion to using the TZ allocator, the efivars service is registered before the memory pool has been allocated, something which can lead to a NULL-pointer dereference in case of a racing EFI variable access. Make sure that all resources have been set up before registering the efivars.

In the Linux kernel, the following vulnerability has been resolved: platform/x86: lenovo-yoga-tab2-pro-1380-fastcharger: fix serdev race The yt2_1380_fc_serdev_probe() function calls devm_serdev_device_open() before setting the client ops via serdev_device_set_client_ops(). This ordering can trigger a NULL pointer dereference in the serdev controller's receive_buf handler, as it assumes serdev->ops is valid when SERPORT_ACTIVE is set. This is similar to the issue fixed in commit 5e700b384ec1 ("platform/chrome: cros_ec_uart: properly fix race condition") where devm_serdev_device_open() was called before fully initializing the device. Fix the race by ensuring client ops are set before enabling the port via devm_serdev_device_open(). Note, serdev_device_set_baudrate() and serdev_device_set_flow_control() calls should be after the devm_serdev_device_open() call.

In the Linux kernel, the following vulnerability has been resolved: blk-rq-qos: fix crash on rq_qos_wait vs. rq_qos_wake_function race We're seeing crashes from rq_qos_wake_function that look like this: BUG: unable to handle page fault for address: ffffafe180a40084 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 100000067 P4D 100000067 PUD 10027c067 PMD 10115d067 PTE 0 Oops: Oops: 0002 [#1] PREEMPT SMP PTI CPU: 17 UID: 0 PID: 0 Comm: swapper/17 Not tainted 6.12.0-rc3-00013-geca631b8fe80 #11 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 RIP: 0010:_raw_spin_lock_irqsave+0x1d/0x40 Code: 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 0f 1f 44 00 00 41 54 9c 41 5c fa 65 ff 05 62 97 30 4c 31 c0 ba 01 00 00 00 <f0> 0f b1 17 75 0a 4c 89 e0 41 5c c3 cc cc cc cc 89 c6 e8 2c 0b 00 RSP: 0018:ffffafe180580ca0 EFLAGS: 00010046 RAX: 0000000000000000 RBX: ffffafe180a3f7a8 RCX: 0000000000000011 RDX: 0000000000000001 RSI: 0000000000000003 RDI: ffffafe180a40084 RBP: 0000000000000000 R08: 00000000001e7240 R09: 0000000000000011 R10: 0000000000000028 R11: 0000000000000888 R12: 0000000000000002 R13: ffffafe180a40084 R14: 0000000000000000 R15: 0000000000000003 FS: 0000000000000000(0000) GS:ffff9aaf1f280000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffafe180a40084 CR3: 000000010e428002 CR4: 0000000000770ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <IRQ> try_to_wake_up+0x5a/0x6a0 rq_qos_wake_function+0x71/0x80 __wake_up_common+0x75/0xa0 __wake_up+0x36/0x60 scale_up.part.0+0x50/0x110 wb_timer_fn+0x227/0x450 ... So rq_qos_wake_function() calls wake_up_process(data->task), which calls try_to_wake_up(), which faults in raw_spin_lock_irqsave(&p->pi_lock). p comes from data->task, and data comes from the waitqueue entry, which is stored on the waiter's stack in rq_qos_wait(). Analyzing the core dump with drgn, I found that the waiter had already woken up and moved on to a completely unrelated code path, clobbering what was previously data->task. Meanwhile, the waker was passing the clobbered garbage in data->task to wake_up_process(), leading to the crash. What's happening is that in between rq_qos_wake_function() deleting the waitqueue entry and calling wake_up_process(), rq_qos_wait() is finding that it already got a token and returning. The race looks like this: rq_qos_wait() rq_qos_wake_function() ============================================================== prepare_to_wait_exclusive() data->got_token = true; list_del_init(&curr->entry); if (data.got_token) break; finish_wait(&rqw->wait, &data.wq); ^- returns immediately because list_empty_careful(&wq_entry->entry) is true ... return, go do something else ... wake_up_process(data->task) (NO LONGER VALID!)-^ Normally, finish_wait() is supposed to synchronize against the waker. But, as noted above, it is returning immediately because the waitqueue entry has already been removed from the waitqueue. The bug is that rq_qos_wake_function() is accessing the waitqueue entry AFTER deleting it. Note that autoremove_wake_function() wakes the waiter and THEN deletes the waitqueue entry, which is the proper order. Fix it by swapping the order. We also need to use list_del_init_careful() to match the list_empty_careful() in finish_wait().

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Avoid race between dcn10_set_drr() and dc_state_destruct() dc_state_destruct() nulls the resource context of the DC state. The pipe context passed to dcn10_set_drr() is a member of this resource context. If dc_state_destruct() is called parallel to the IRQ processing (which calls dcn10_set_drr() at some point), we can end up using already nulled function callback fields of struct stream_resource. The logic in dcn10_set_drr() already tries to avoid this, by checking tg against NULL. But if the nulling happens exactly after the NULL check and before the next access, then we get a race. Avoid this by copying tg first to a local variable, and then use this variable for all the operations. This should work, as long as nobody frees the resource pool where the timing generators live. (cherry picked from commit a3cc326a43bdc48fbdf53443e1027a03e309b643)

In the Linux kernel, the following vulnerability has been resolved: vfs: Don't evict inode under the inode lru traversing context The inode reclaiming process(See function prune_icache_sb) collects all reclaimable inodes and mark them with I_FREEING flag at first, at that time, other processes will be stuck if they try getting these inodes (See function find_inode_fast), then the reclaiming process destroy the inodes by function dispose_list(). Some filesystems(eg. ext4 with ea_inode feature, ubifs with xattr) may do inode lookup in the inode evicting callback function, if the inode lookup is operated under the inode lru traversing context, deadlock problems may happen. Case 1: In function ext4_evict_inode(), the ea inode lookup could happen if ea_inode feature is enabled, the lookup process will be stuck under the evicting context like this: 1. File A has inode i_reg and an ea inode i_ea 2. getfattr(A, xattr_buf) // i_ea is added into lru // lru->i_ea 3. Then, following three processes running like this: PA PB echo 2 > /proc/sys/vm/drop_caches shrink_slab prune_dcache_sb // i_reg is added into lru, lru->i_ea->i_reg prune_icache_sb list_lru_walk_one inode_lru_isolate i_ea->i_state |= I_FREEING // set inode state inode_lru_isolate __iget(i_reg) spin_unlock(&i_reg->i_lock) spin_unlock(lru_lock) rm file A i_reg->nlink = 0 iput(i_reg) // i_reg->nlink is 0, do evict ext4_evict_inode ext4_xattr_delete_inode ext4_xattr_inode_dec_ref_all ext4_xattr_inode_iget ext4_iget(i_ea->i_ino) iget_locked find_inode_fast __wait_on_freeing_inode(i_ea) ----→ AA deadlock dispose_list // cannot be executed by prune_icache_sb wake_up_bit(&i_ea->i_state) Case 2: In deleted inode writing function ubifs_jnl_write_inode(), file deleting process holds BASEHD's wbuf->io_mutex while getting the xattr inode, which could race with inode reclaiming process(The reclaiming process could try locking BASEHD's wbuf->io_mutex in inode evicting function), then an ABBA deadlock problem would happen as following: 1. File A has inode ia and a xattr(with inode ixa), regular file B has inode ib and a xattr. 2. getfattr(A, xattr_buf) // ixa is added into lru // lru->ixa 3. Then, following three processes running like this: PA PB PC echo 2 > /proc/sys/vm/drop_caches shrink_slab prune_dcache_sb // ib and ia are added into lru, lru->ixa->ib->ia prune_icache_sb list_lru_walk_one inode_lru_isolate ixa->i_state |= I_FREEING // set inode state inode_lru_isolate __iget(ib) spin_unlock(&ib->i_lock) spin_unlock(lru_lock) rm file B ib->nlink = 0 rm file A iput(ia) ubifs_evict_inode(ia) ubifs_jnl_delete_inode(ia) ubifs_jnl_write_inode(ia) make_reservation(BASEHD) // Lock wbuf->io_mutex ubifs_iget(ixa->i_ino) iget_locked find_inode_fast __wait_on_freeing_inode(ixa) | iput(ib) // ib->nlink is 0, do evict | ubifs_evict_inode | ubifs_jnl_delete_inode(ib) ↓ ubifs_jnl_write_inode ABBA deadlock ←-----make_reservation(BASEHD) dispose_list // cannot be executed by prune_icache_sb wake_up_bit(&ixa->i_state) Fix the possible deadlock by using new inode state flag I_LRU_ISOLATING to pin the inode in memory while inode_lru_isolate( ---truncated---

In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Complete command early within lock A crash was observed while performing NPIV and FW reset, BUG: kernel NULL pointer dereference, address: 000000000000001c #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 1 PREEMPT_RT SMP NOPTI RIP: 0010:dma_direct_unmap_sg+0x51/0x1e0 RSP: 0018:ffffc90026f47b88 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000021 RCX: 0000000000000002 RDX: 0000000000000021 RSI: 0000000000000000 RDI: ffff8881041130d0 RBP: ffff8881041130d0 R08: 0000000000000000 R09: 0000000000000034 R10: ffffc90026f47c48 R11: 0000000000000031 R12: 0000000000000000 R13: 0000000000000000 R14: ffff8881565e4a20 R15: 0000000000000000 FS: 00007f4c69ed3d00(0000) GS:ffff889faac80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000000001c CR3: 0000000288a50002 CR4: 00000000007706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> ? __die_body+0x1a/0x60 ? page_fault_oops+0x16f/0x4a0 ? do_user_addr_fault+0x174/0x7f0 ? exc_page_fault+0x69/0x1a0 ? asm_exc_page_fault+0x22/0x30 ? dma_direct_unmap_sg+0x51/0x1e0 ? preempt_count_sub+0x96/0xe0 qla2xxx_qpair_sp_free_dma+0x29f/0x3b0 [qla2xxx] qla2xxx_qpair_sp_compl+0x60/0x80 [qla2xxx] __qla2x00_abort_all_cmds+0xa2/0x450 [qla2xxx] The command completion was done early while aborting the commands in driver unload path but outside lock to avoid the WARN_ON condition of performing dma_free_attr within the lock. However this caused race condition while command completion via multiple paths causing system crash. Hence complete the command early in unload path but within the lock to avoid race condition.

In the Linux kernel, the following vulnerability has been resolved: Revert "mm/writeback: fix possible divide-by-zero in wb_dirty_limits(), again" Patch series "mm: Avoid possible overflows in dirty throttling". Dirty throttling logic assumes dirty limits in page units fit into 32-bits. This patch series makes sure this is true (see patch 2/2 for more details). This patch (of 2): This reverts commit 9319b647902cbd5cc884ac08a8a6d54ce111fc78. The commit is broken in several ways. Firstly, the removed (u64) cast from the multiplication will introduce a multiplication overflow on 32-bit archs if wb_thresh * bg_thresh >= 1<<32 (which is actually common - the default settings with 4GB of RAM will trigger this). Secondly, the div64_u64() is unnecessarily expensive on 32-bit archs. We have div64_ul() in case we want to be safe & cheap. Thirdly, if dirty thresholds are larger than 1<<32 pages, then dirty balancing is going to blow up in many other spectacular ways anyway so trying to fix one possible overflow is just moot.

In the Linux kernel, the following vulnerability has been resolved: memcg: protect concurrent access to mem_cgroup_idr Commit 73f576c04b94 ("mm: memcontrol: fix cgroup creation failure after many small jobs") decoupled the memcg IDs from the CSS ID space to fix the cgroup creation failures. It introduced IDR to maintain the memcg ID space. The IDR depends on external synchronization mechanisms for modifications. For the mem_cgroup_idr, the idr_alloc() and idr_replace() happen within css callback and thus are protected through cgroup_mutex from concurrent modifications. However idr_remove() for mem_cgroup_idr was not protected against concurrency and can be run concurrently for different memcgs when they hit their refcnt to zero. Fix that. We have been seeing list_lru based kernel crashes at a low frequency in our fleet for a long time. These crashes were in different part of list_lru code including list_lru_add(), list_lru_del() and reparenting code. Upon further inspection, it looked like for a given object (dentry and inode), the super_block's list_lru didn't have list_lru_one for the memcg of that object. The initial suspicions were either the object is not allocated through kmem_cache_alloc_lru() or somehow memcg_list_lru_alloc() failed to allocate list_lru_one() for a memcg but returned success. No evidence were found for these cases. Looking more deeply, we started seeing situations where valid memcg's id is not present in mem_cgroup_idr and in some cases multiple valid memcgs have same id and mem_cgroup_idr is pointing to one of them. So, the most reasonable explanation is that these situations can happen due to race between multiple idr_remove() calls or race between idr_alloc()/idr_replace() and idr_remove(). These races are causing multiple memcgs to acquire the same ID and then offlining of one of them would cleanup list_lrus on the system for all of them. Later access from other memcgs to the list_lru cause crashes due to missing list_lru_one.

A flaw was found in the MCTP protocol in the Linux kernel. The function mctp_unregister() reclaims the device's relevant resource when a netcard detaches. However, a running routine may be unaware of this and cause the use-after-free of the mdev->addrs object, potentially leading to a denial of service.

Anaconda 3 2023.03-1-Linux allows local users to disrupt TLS certificate validation by modifying the cacert.pem file used by the installed pip program. This occurs because many files are installed as world-writable on Linux, ignoring umask, even when these files are installed as root. Miniconda is also affected.

A NULL pointer dereference flaw was found in the Linux kernel's drivers/gpu/drm/msm/msm_gem_submit.c code in the submit_lookup_cmds function, which fails because it lacks a check of the return value of kmalloc(). This issue allows a local user to crash the system.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Avoid race between dcn35_set_drr() and dc_state_destruct() dc_state_destruct() nulls the resource context of the DC state. The pipe context passed to dcn35_set_drr() is a member of this resource context. If dc_state_destruct() is called parallel to the IRQ processing (which calls dcn35_set_drr() at some point), we can end up using already nulled function callback fields of struct stream_resource. The logic in dcn35_set_drr() already tries to avoid this, by checking tg against NULL. But if the nulling happens exactly after the NULL check and before the next access, then we get a race. Avoid this by copying tg first to a local variable, and then use this variable for all the operations. This should work, as long as nobody frees the resource pool where the timing generators live. (cherry picked from commit 0607a50c004798a96e62c089a4c34c220179dcb5)

IBM Spectrum Protect 8.1.0.0 through 8.1.17.0 could allow a local user to cause a denial of service due to due to improper time-of-check to time-of-use functionality. IBM X-Force ID: 256012.

An issue was discovered in the Linux kernel before 6.2.9. A use-after-free was found in bq24190_remove in drivers/power/supply/bq24190_charger.c. It could allow a local attacker to crash the system due to a race condition.

In the Linux kernel, the following vulnerability has been resolved: PCI: of_property: Return error for int_map allocation failure Return -ENOMEM from of_pci_prop_intr_map() if kcalloc() fails to prevent a NULL pointer dereference in this case. [bhelgaas: commit log]

In the Linux kernel, the following vulnerability has been resolved: gpio: pca953x: fix pca953x_irq_bus_sync_unlock race Ensure that `i2c_lock' is held when setting interrupt latch and mask in pca953x_irq_bus_sync_unlock() in order to avoid races. The other (non-probe) call site pca953x_gpio_set_multiple() ensures the lock is held before calling pca953x_write_regs(). The problem occurred when a request raced against irq_bus_sync_unlock() approximately once per thousand reboots on an i.MX8MP based system. * Normal case 0-0022: write register AI|3a {03,02,00,00,01} Input latch P0 0-0022: write register AI|49 {fc,fd,ff,ff,fe} Interrupt mask P0 0-0022: write register AI|08 {ff,00,00,00,00} Output P3 0-0022: write register AI|12 {fc,00,00,00,00} Config P3 * Race case 0-0022: write register AI|08 {ff,00,00,00,00} Output P3 0-0022: write register AI|08 {03,02,00,00,01} *** Wrong register *** 0-0022: write register AI|12 {fc,00,00,00,00} Config P3 0-0022: write register AI|49 {fc,fd,ff,ff,fe} Interrupt mask P0

In the Linux kernel, the following vulnerability has been resolved: ice: Don't process extts if PTP is disabled The ice_ptp_extts_event() function can race with ice_ptp_release() and result in a NULL pointer dereference which leads to a kernel panic. Panic occurs because the ice_ptp_extts_event() function calls ptp_clock_event() with a NULL pointer. The ice driver has already released the PTP clock by the time the interrupt for the next external timestamp event occurs. To fix this, modify the ice_ptp_extts_event() function to check the PTP state and bail early if PTP is not ready.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Add 'replay' NULL check in 'edp_set_replay_allow_active()' In the first if statement, we're checking if 'replay' is NULL. But in the second if statement, we're not checking if 'replay' is NULL again before calling replay->funcs->replay_set_power_opt(). if (replay == NULL && force_static) return false; ... if (link->replay_settings.replay_feature_enabled && replay->funcs->replay_set_power_opt) { replay->funcs->replay_set_power_opt(replay, *power_opts, panel_inst); link->replay_settings.replay_power_opt_active = *power_opts; } If 'replay' is NULL, this will cause a null pointer dereference. Fixes the below found by smatch: drivers/gpu/drm/amd/amdgpu/../display/dc/link/protocols/link_edp_panel_control.c:895 edp_set_replay_allow_active() error: we previously assumed 'replay' could be null (see line 887)

In the Linux kernel, the following vulnerability has been resolved: nvmet: fix a possible leak when destroy a ctrl during qp establishment In nvmet_sq_destroy we capture sq->ctrl early and if it is non-NULL we know that a ctrl was allocated (in the admin connect request handler) and we need to release pending AERs, clear ctrl->sqs and sq->ctrl (for nvme-loop primarily), and drop the final reference on the ctrl. However, a small window is possible where nvmet_sq_destroy starts (as a result of the client giving up and disconnecting) concurrently with the nvme admin connect cmd (which may be in an early stage). But *before* kill_and_confirm of sq->ref (i.e. the admin connect managed to get an sq live reference). In this case, sq->ctrl was allocated however after it was captured in a local variable in nvmet_sq_destroy. This prevented the final reference drop on the ctrl. Solve this by re-capturing the sq->ctrl after all inflight request has completed, where for sure sq->ctrl reference is final, and move forward based on that. This issue was observed in an environment with many hosts connecting multiple ctrls simoutanuosly, creating a delay in allocating a ctrl leading up to this race window.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix overlapping copy within dml_core_mode_programming [WHY] &mode_lib->mp.Watermark and &locals->Watermark are the same address. memcpy may lead to unexpected behavior. [HOW] memmove should be used.

In the Linux kernel before 6.1.13, there is a double free in net/mpls/af_mpls.c upon an allocation failure (for registering the sysctl table under a new location) during the renaming of a device.

In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mvm: pick the version of SESSION_PROTECTION_NOTIF When we want to know whether we should look for the mac_id or the link_id in struct iwl_mvm_session_prot_notif, we should look at the version of SESSION_PROTECTION_NOTIF. This causes WARNINGs: WARNING: CPU: 0 PID: 11403 at drivers/net/wireless/intel/iwlwifi/mvm/time-event.c:959 iwl_mvm_rx_session_protect_notif+0x333/0x340 [iwlmvm] RIP: 0010:iwl_mvm_rx_session_protect_notif+0x333/0x340 [iwlmvm] Code: 00 49 c7 84 24 48 07 00 00 00 00 00 00 41 c6 84 24 78 07 00 00 ff 4c 89 f7 e8 e9 71 54 d9 e9 7d fd ff ff 0f 0b e9 23 fe ff ff <0f> 0b e9 1c fe ff ff 66 0f 1f 44 00 00 90 90 90 90 90 90 90 90 90 RSP: 0018:ffffb4bb00003d40 EFLAGS: 00010202 RAX: 0000000000000000 RBX: ffff9ae63a361000 RCX: ffff9ae4a98b60d4 RDX: ffff9ae4588499c0 RSI: 0000000000000305 RDI: ffff9ae4a98b6358 RBP: ffffb4bb00003d68 R08: 0000000000000003 R09: 0000000000000010 R10: ffffb4bb00003d00 R11: 000000000000000f R12: ffff9ae441399050 R13: ffff9ae4761329e8 R14: 0000000000000001 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff9ae7af400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055fb75680018 CR3: 00000003dae32006 CR4: 0000000000f70ef0 PKRU: 55555554 Call Trace: <IRQ> ? show_regs+0x69/0x80 ? __warn+0x8d/0x150 ? iwl_mvm_rx_session_protect_notif+0x333/0x340 [iwlmvm] ? report_bug+0x196/0x1c0 ? handle_bug+0x45/0x80 ? exc_invalid_op+0x1c/0xb0 ? asm_exc_invalid_op+0x1f/0x30 ? iwl_mvm_rx_session_protect_notif+0x333/0x340 [iwlmvm] iwl_mvm_rx_common+0x115/0x340 [iwlmvm] iwl_mvm_rx_mq+0xa6/0x100 [iwlmvm] iwl_pcie_rx_handle+0x263/0xa10 [iwlwifi] iwl_pcie_napi_poll_msix+0x32/0xd0 [iwlwifi]

In the Linux kernel, the following vulnerability has been resolved: btrfs: qgroup: do not warn on record without old_roots populated [BUG] There are some reports from the mailing list that since v6.1 kernel, the WARN_ON() inside btrfs_qgroup_account_extent() gets triggered during rescan: WARNING: CPU: 3 PID: 6424 at fs/btrfs/qgroup.c:2756 btrfs_qgroup_account_extents+0x1ae/0x260 [btrfs] CPU: 3 PID: 6424 Comm: snapperd Tainted: P OE 6.1.2-1-default #1 openSUSE Tumbleweed 05c7a1b1b61d5627475528f71f50444637b5aad7 RIP: 0010:btrfs_qgroup_account_extents+0x1ae/0x260 [btrfs] Call Trace: <TASK> btrfs_commit_transaction+0x30c/0xb40 [btrfs c39c9c546c241c593f03bd6d5f39ea1b676250f6] ? start_transaction+0xc3/0x5b0 [btrfs c39c9c546c241c593f03bd6d5f39ea1b676250f6] btrfs_qgroup_rescan+0x42/0xc0 [btrfs c39c9c546c241c593f03bd6d5f39ea1b676250f6] btrfs_ioctl+0x1ab9/0x25c0 [btrfs c39c9c546c241c593f03bd6d5f39ea1b676250f6] ? __rseq_handle_notify_resume+0xa9/0x4a0 ? mntput_no_expire+0x4a/0x240 ? __seccomp_filter+0x319/0x4d0 __x64_sys_ioctl+0x90/0xd0 do_syscall_64+0x5b/0x80 ? syscall_exit_to_user_mode+0x17/0x40 ? do_syscall_64+0x67/0x80 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7fd9b790d9bf </TASK> [CAUSE] Since commit e15e9f43c7ca ("btrfs: introduce BTRFS_QGROUP_RUNTIME_FLAG_NO_ACCOUNTING to skip qgroup accounting"), if our qgroup is already in inconsistent state, we will no longer do the time-consuming backref walk. This can leave some qgroup records without a valid old_roots ulist. Normally this is fine, as btrfs_qgroup_account_extents() would also skip those records if we have NO_ACCOUNTING flag set. But there is a small window, if we have NO_ACCOUNTING flag set, and inserted some qgroup_record without a old_roots ulist, but then the user triggered a qgroup rescan. During btrfs_qgroup_rescan(), we firstly clear NO_ACCOUNTING flag, then commit current transaction. And since we have a qgroup_record with old_roots = NULL, we trigger the WARN_ON() during btrfs_qgroup_account_extents(). [FIX] Unfortunately due to the introduction of NO_ACCOUNTING flag, the assumption that every qgroup_record would have its old_roots populated is no longer correct. Fix the false alerts and drop the WARN_ON().

In the Linux kernel, the following vulnerability has been resolved: HID: logitech-hidpp: Fix kernel crash on receiver USB disconnect hidpp_connect_event() has *four* time-of-check vs time-of-use (TOCTOU) races when it races with itself. hidpp_connect_event() primarily runs from a workqueue but it also runs on probe() and if a "device-connected" packet is received by the hw when the thread running hidpp_connect_event() from probe() is waiting on the hw, then a second thread running hidpp_connect_event() will be started from the workqueue. This opens the following races (note the below code is simplified): 1. Retrieving + printing the protocol (harmless race): if (!hidpp->protocol_major) { hidpp_root_get_protocol_version() hidpp->protocol_major = response.rap.params[0]; } We can actually see this race hit in the dmesg in the abrt output attached to rhbz#2227968: [ 3064.624215] logitech-hidpp-device 0003:046D:4071.0049: HID++ 4.5 device connected. [ 3064.658184] logitech-hidpp-device 0003:046D:4071.0049: HID++ 4.5 device connected. Testing with extra logging added has shown that after this the 2 threads take turn grabbing the hw access mutex (send_mutex) so they ping-pong through all the other TOCTOU cases managing to hit all of them: 2. Updating the name to the HIDPP name (harmless race): if (hidpp->name == hdev->name) { ... hidpp->name = new_name; } 3. Initializing the power_supply class for the battery (problematic!): hidpp_initialize_battery() { if (hidpp->battery.ps) return 0; probe_battery(); /* Blocks, threads take turns executing this */ hidpp->battery.desc.properties = devm_kmemdup(dev, hidpp_battery_props, cnt, GFP_KERNEL); hidpp->battery.ps = devm_power_supply_register(&hidpp->hid_dev->dev, &hidpp->battery.desc, cfg); } 4. Creating delayed input_device (potentially problematic): if (hidpp->delayed_input) return; hidpp->delayed_input = hidpp_allocate_input(hdev); The really big problem here is 3. Hitting the race leads to the following sequence: hidpp->battery.desc.properties = devm_kmemdup(dev, hidpp_battery_props, cnt, GFP_KERNEL); hidpp->battery.ps = devm_power_supply_register(&hidpp->hid_dev->dev, &hidpp->battery.desc, cfg); ... hidpp->battery.desc.properties = devm_kmemdup(dev, hidpp_battery_props, cnt, GFP_KERNEL); hidpp->battery.ps = devm_power_supply_register(&hidpp->hid_dev->dev, &hidpp->battery.desc, cfg); So now we have registered 2 power supplies for the same battery, which looks a bit weird from userspace's pov but this is not even the really big problem. Notice how: 1. This is all devm-maganaged 2. The hidpp->battery.desc struct is shared between the 2 power supplies 3. hidpp->battery.desc.properties points to the result from the second devm_kmemdup() This causes a use after free scenario on USB disconnect of the receiver: 1. The last registered power supply class device gets unregistered 2. The memory from the last devm_kmemdup() call gets freed, hidpp->battery.desc.properties now points to freed memory 3. The first registered power supply class device gets unregistered, this involves sending a remove uevent to userspace which invokes power_supply_uevent() to fill the uevent data 4. power_supply_uevent() uses hidpp->battery.desc.properties which now points to freed memory leading to backtraces like this one: Sep 22 20:01:35 eric kernel: BUG: unable to handle page fault for address: ffffb2140e017f08 ... Sep 22 20:01:35 eric kernel: Workqueue: usb_hub_wq hub_event Sep 22 20:01:35 eric kernel: RIP: 0010:power_supply_uevent+0xee/0x1d0 ... Sep 22 20:01:35 eric kernel: ? asm_exc_page_fault+0x26/0x30 Sep 22 20:01:35 eric kernel: ? power_supply_uevent+0xee/0x1d0 Sep 22 20:01:35 eric kernel: ? power_supply_uevent+0x10d/0x1d0 Sep 22 20:01:35 eric kernel: dev_uevent+0x10f/0x2d0 Sep 22 20:01:35 eric kernel: kobject_uevent_env+0x291/0x680 Sep 22 20:01:35 eric kernel: ---truncated---

A use-after-free flaw was found in ndlc_remove in drivers/nfc/st-nci/ndlc.c in the Linux Kernel. This flaw could allow an attacker to crash the system due to a race problem.

A use-after-free flaw was found in xen_9pfs_front_removet in net/9p/trans_xen.c in Xen transport for 9pfs in the Linux Kernel. This flaw could allow a local attacker to crash the system due to a race problem, possibly leading to a kernel information leak.

A data race flaw was found in the Linux kernel, between where con is allocated and con->sock is set. This issue leads to a NULL pointer dereference when accessing con->sock->sk in net/tipc/topsrv.c in the tipc protocol in the Linux kernel.

A use-after-free flaw was found in io_uring/poll.c in io_poll_check_events in the io_uring subcomponent in the Linux Kernel due to a race condition of poll_refs. This flaw may cause a NULL pointer dereference.

A use-after-free flaw was found in qdisc_graft in net/sched/sch_api.c in the Linux Kernel due to a race problem. This flaw leads to a denial of service issue. If patch ebda44da44f6 ("net: sched: fix race condition in qdisc_graft()") not applied yet, then kernel could be affected.