In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mvm: don't try to talk to a dead firmware This fixes: bad state = 0 WARNING: CPU: 10 PID: 702 at drivers/net/wireless/inel/iwlwifi/iwl-trans.c:178 iwl_trans_send_cmd+0xba/0xe0 [iwlwifi] Call Trace: <TASK> ? __warn+0xca/0x1c0 ? iwl_trans_send_cmd+0xba/0xe0 [iwlwifi 64fa9ad799a0e0d2ba53d4af93a53ad9a531f8d4] iwl_fw_dbg_clear_monitor_buf+0xd7/0x110 [iwlwifi 64fa9ad799a0e0d2ba53d4af93a53ad9a531f8d4] _iwl_dbgfs_fw_dbg_clear_write+0xe2/0x120 [iwlmvm 0e8adb18cea92d2c341766bcc10b18699290068a] Ask whether the firmware is alive before sending a command.

In the Linux kernel, the following vulnerability has been resolved: ax25: Fix netdev refcount issue The dev_tracker is added to ax25_cb in ax25_bind(). When the ax25 device is detaching, the dev_tracker of ax25_cb should be deallocated in ax25_kill_by_device() instead of the dev_tracker of ax25_dev. The log reported by ref_tracker is shown below: [ 80.884935] ref_tracker: reference already released. [ 80.885150] ref_tracker: allocated in: [ 80.885349] ax25_dev_device_up+0x105/0x540 [ 80.885730] ax25_device_event+0xa4/0x420 [ 80.885730] notifier_call_chain+0xc9/0x1e0 [ 80.885730] __dev_notify_flags+0x138/0x280 [ 80.885730] dev_change_flags+0xd7/0x180 [ 80.885730] dev_ifsioc+0x6a9/0xa30 [ 80.885730] dev_ioctl+0x4d8/0xd90 [ 80.885730] sock_do_ioctl+0x1c2/0x2d0 [ 80.885730] sock_ioctl+0x38b/0x4f0 [ 80.885730] __se_sys_ioctl+0xad/0xf0 [ 80.885730] do_syscall_64+0xc4/0x1b0 [ 80.885730] entry_SYSCALL_64_after_hwframe+0x67/0x6f [ 80.885730] ref_tracker: freed in: [ 80.885730] ax25_device_event+0x272/0x420 [ 80.885730] notifier_call_chain+0xc9/0x1e0 [ 80.885730] dev_close_many+0x272/0x370 [ 80.885730] unregister_netdevice_many_notify+0x3b5/0x1180 [ 80.885730] unregister_netdev+0xcf/0x120 [ 80.885730] sixpack_close+0x11f/0x1b0 [ 80.885730] tty_ldisc_kill+0xcb/0x190 [ 80.885730] tty_ldisc_hangup+0x338/0x3d0 [ 80.885730] __tty_hangup+0x504/0x740 [ 80.885730] tty_release+0x46e/0xd80 [ 80.885730] __fput+0x37f/0x770 [ 80.885730] __x64_sys_close+0x7b/0xb0 [ 80.885730] do_syscall_64+0xc4/0x1b0 [ 80.885730] entry_SYSCALL_64_after_hwframe+0x67/0x6f [ 80.893739] ------------[ cut here ]------------ [ 80.894030] WARNING: CPU: 2 PID: 140 at lib/ref_tracker.c:255 ref_tracker_free+0x47b/0x6b0 [ 80.894297] Modules linked in: [ 80.894929] CPU: 2 PID: 140 Comm: ax25_conn_rel_6 Not tainted 6.9.0-rc4-g8cd26fd90c1a #11 [ 80.895190] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qem4 [ 80.895514] RIP: 0010:ref_tracker_free+0x47b/0x6b0 [ 80.895808] Code: 83 c5 18 4c 89 eb 48 c1 eb 03 8a 04 13 84 c0 0f 85 df 01 00 00 41 83 7d 00 00 75 4b 4c 89 ff 9 [ 80.896171] RSP: 0018:ffff888009edf8c0 EFLAGS: 00000286 [ 80.896339] RAX: 1ffff1100141ac00 RBX: 1ffff1100149463b RCX: dffffc0000000000 [ 80.896502] RDX: 0000000000000001 RSI: 0000000000000246 RDI: ffff88800a0d6518 [ 80.896925] RBP: ffff888009edf9b0 R08: ffff88806d3288d3 R09: 1ffff1100da6511a [ 80.897212] R10: dffffc0000000000 R11: ffffed100da6511b R12: ffff88800a4a31d4 [ 80.897859] R13: ffff88800a4a31d8 R14: dffffc0000000000 R15: ffff88800a0d6518 [ 80.898279] FS: 00007fd88b7fe700(0000) GS:ffff88806d300000(0000) knlGS:0000000000000000 [ 80.899436] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 80.900181] CR2: 00007fd88c001d48 CR3: 000000000993e000 CR4: 00000000000006f0 ... [ 80.935774] ref_tracker: sp%d@000000000bb9df3d has 1/1 users at [ 80.935774] ax25_bind+0x424/0x4e0 [ 80.935774] __sys_bind+0x1d9/0x270 [ 80.935774] __x64_sys_bind+0x75/0x80 [ 80.935774] do_syscall_64+0xc4/0x1b0 [ 80.935774] entry_SYSCALL_64_after_hwframe+0x67/0x6f Change ax25_dev->dev_tracker to the dev_tracker of ax25_cb in order to mitigate the bug.

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix bpf_sk_select_reuseport() memory leak As pointed out in the original comment, lookup in sockmap can return a TCP ESTABLISHED socket. Such TCP socket may have had SO_ATTACH_REUSEPORT_EBPF set before it was ESTABLISHED. In other words, a non-NULL sk_reuseport_cb does not imply a non-refcounted socket. Drop sk's reference in both error paths. unreferenced object 0xffff888101911800 (size 2048): comm "test_progs", pid 44109, jiffies 4297131437 hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 80 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace (crc 9336483b): __kmalloc_noprof+0x3bf/0x560 __reuseport_alloc+0x1d/0x40 reuseport_alloc+0xca/0x150 reuseport_attach_prog+0x87/0x140 sk_reuseport_attach_bpf+0xc8/0x100 sk_setsockopt+0x1181/0x1990 do_sock_setsockopt+0x12b/0x160 __sys_setsockopt+0x7b/0xc0 __x64_sys_setsockopt+0x1b/0x30 do_syscall_64+0x93/0x180 entry_SYSCALL_64_after_hwframe+0x76/0x7e

In the Linux kernel, the following vulnerability has been resolved: ata: libata-sff: Ensure that we cannot write outside the allocated buffer reveliofuzzing reported that a SCSI_IOCTL_SEND_COMMAND ioctl with out_len set to 0xd42, SCSI command set to ATA_16 PASS-THROUGH, ATA command set to ATA_NOP, and protocol set to ATA_PROT_PIO, can cause ata_pio_sector() to write outside the allocated buffer, overwriting random memory. While a ATA device is supposed to abort a ATA_NOP command, there does seem to be a bug either in libata-sff or QEMU, where either this status is not set, or the status is cleared before read by ata_sff_hsm_move(). Anyway, that is most likely a separate bug. Looking at __atapi_pio_bytes(), it already has a safety check to ensure that __atapi_pio_bytes() cannot write outside the allocated buffer. Add a similar check to ata_pio_sector(), such that also ata_pio_sector() cannot write outside the allocated buffer.

In the Linux kernel, the following vulnerability has been resolved: drm/sched: Fix fence reference count leak The last_scheduled fence leaks when an entity is being killed and adding the cleanup callback fails. Decrement the reference count of prev when dma_fence_add_callback() fails, ensuring proper balance. [phasta: add git tag info for stable kernel]

In the Linux kernel, the following vulnerability has been resolved: fs/netfs/read_collect: add to next->prev_donated If multiple subrequests donate data to the same "next" request (depending on the subrequest completion order), each of them would overwrite the `prev_donated` field, causing data corruption and a BUG() crash ("Can't donate prior to front").

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: Add check for mgmt_alloc_skb() in mgmt_device_connected() Add check for the return value of mgmt_alloc_skb() in mgmt_device_connected() to prevent null pointer dereference.

In the Linux kernel, the following vulnerability has been resolved: netdev: prevent accessing NAPI instances from another namespace The NAPI IDs were not fully exposed to user space prior to the netlink API, so they were never namespaced. The netlink API must ensure that at the very least NAPI instance belongs to the same netns as the owner of the genl sock. napi_by_id() can become static now, but it needs to move because of dev_get_by_napi_id().

In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: Prevent integer overflow in hdr_first_de() The "de_off" and "used" variables come from the disk so they both need to check. The problem is that on 32bit systems if they're both greater than UINT_MAX - 16 then the check does work as intended because of an integer overflow.

In the Linux kernel, the following vulnerability has been resolved: bpf: avoid holding freeze_mutex during mmap operation We use map->freeze_mutex to prevent races between map_freeze() and memory mapping BPF map contents with writable permissions. The way we naively do this means we'll hold freeze_mutex for entire duration of all the mm and VMA manipulations, which is completely unnecessary. This can potentially also lead to deadlocks, as reported by syzbot in [0]. So, instead, hold freeze_mutex only during writeability checks, bump (proactively) "write active" count for the map, unlock the mutex and proceed with mmap logic. And only if something went wrong during mmap logic, then undo that "write active" counter increment. [0] https://lore.kernel.org/bpf/678dcbc9.050a0220.303755.0066.GAE@google.com/

In the Linux kernel, the following vulnerability has been resolved: mm/gup: reject FOLL_SPLIT_PMD with hugetlb VMAs Patch series "mm: fixes for device-exclusive entries (hmm)", v2. Discussing the PageTail() call in make_device_exclusive_range() with Willy, I recently discovered [1] that device-exclusive handling does not properly work with THP, making the hmm-tests selftests fail if THPs are enabled on the system. Looking into more details, I found that hugetlb is not properly fenced, and I realized that something that was bugging me for longer -- how device-exclusive entries interact with mapcounts -- completely breaks migration/swapout/split/hwpoison handling of these folios while they have device-exclusive PTEs. The program below can be used to allocate 1 GiB worth of pages and making them device-exclusive on a kernel with CONFIG_TEST_HMM. Once they are device-exclusive, these folios cannot get swapped out (proc$pid/smaps_rollup will always indicate 1 GiB RSS no matter how much one forces memory reclaim), and when having a memory block onlined to ZONE_MOVABLE, trying to offline it will loop forever and complain about failed migration of a page that should be movable. # echo offline > /sys/devices/system/memory/memory136/state # echo online_movable > /sys/devices/system/memory/memory136/state # ./hmm-swap & ... wait until everything is device-exclusive # echo offline > /sys/devices/system/memory/memory136/state [ 285.193431][T14882] page: refcount:2 mapcount:0 mapping:0000000000000000 index:0x7f20671f7 pfn:0x442b6a [ 285.196618][T14882] memcg:ffff888179298000 [ 285.198085][T14882] anon flags: 0x5fff0000002091c(referenced|uptodate| dirty|active|owner_2|swapbacked|node=1|zone=3|lastcpupid=0x7ff) [ 285.201734][T14882] raw: ... [ 285.204464][T14882] raw: ... [ 285.207196][T14882] page dumped because: migration failure [ 285.209072][T14882] page_owner tracks the page as allocated [ 285.210915][T14882] page last allocated via order 0, migratetype Movable, gfp_mask 0x140dca(GFP_HIGHUSER_MOVABLE|__GFP_COMP|__GFP_ZERO), id 14926, tgid 14926 (hmm-swap), ts 254506295376, free_ts 227402023774 [ 285.216765][T14882] post_alloc_hook+0x197/0x1b0 [ 285.218874][T14882] get_page_from_freelist+0x76e/0x3280 [ 285.220864][T14882] __alloc_frozen_pages_noprof+0x38e/0x2740 [ 285.223302][T14882] alloc_pages_mpol+0x1fc/0x540 [ 285.225130][T14882] folio_alloc_mpol_noprof+0x36/0x340 [ 285.227222][T14882] vma_alloc_folio_noprof+0xee/0x1a0 [ 285.229074][T14882] __handle_mm_fault+0x2b38/0x56a0 [ 285.230822][T14882] handle_mm_fault+0x368/0x9f0 ... This series fixes all issues I found so far. There is no easy way to fix without a bigger rework/cleanup. I have a bunch of cleanups on top (some previous sent, some the result of the discussion in v1) that I will send out separately once this landed and I get to it. I wish we could just use some special present PROT_NONE PTEs instead of these (non-present, non-none) fake-swap entries; but that just results in the same problem we keep having (lack of spare PTE bits), and staring at other similar fake-swap entries, that ship has sailed. With this series, make_device_exclusive() doesn't actually belong into mm/rmap.c anymore, but I'll leave moving that for another day. I only tested this series with the hmm-tests selftests due to lack of HW, so I'd appreciate some testing, especially if the interaction between two GPUs wanting a device-exclusive entry works as expected. <program> #include <stdio.h> #include <fcntl.h> #include <stdint.h> #include <unistd.h> #include <stdlib.h> #include <string.h> #include <sys/mman.h> #include <sys/ioctl.h> #include <linux/types.h> #include <linux/ioctl.h> #define HMM_DMIRROR_EXCLUSIVE _IOWR('H', 0x05, struct hmm_dmirror_cmd) struct hmm_dmirror_cmd { __u64 addr; __u64 ptr; __u64 npages; __u64 cpages; __u64 faults; }; const size_t size = 1 * 1024 * 1024 * 1024ul; const size_t chunk_size = 2 * 1024 * 1024ul; int m ---truncated---

In the Linux kernel, the following vulnerability has been resolved: eth: bnxt: do not update checksum in bnxt_xdp_build_skb() The bnxt_rx_pkt() updates ip_summed value at the end if checksum offload is enabled. When the XDP-MB program is attached and it returns XDP_PASS, the bnxt_xdp_build_skb() is called to update skb_shared_info. The main purpose of bnxt_xdp_build_skb() is to update skb_shared_info, but it updates ip_summed value too if checksum offload is enabled. This is actually duplicate work. When the bnxt_rx_pkt() updates ip_summed value, it checks if ip_summed is CHECKSUM_NONE or not. It means that ip_summed should be CHECKSUM_NONE at this moment. But ip_summed may already be updated to CHECKSUM_UNNECESSARY in the XDP-MB-PASS path. So the by skb_checksum_none_assert() WARNS about it. This is duplicate work and updating ip_summed in the bnxt_xdp_build_skb() is not needed. Splat looks like: WARNING: CPU: 3 PID: 5782 at ./include/linux/skbuff.h:5155 bnxt_rx_pkt+0x479b/0x7610 [bnxt_en] Modules linked in: bnxt_re bnxt_en rdma_ucm rdma_cm iw_cm ib_cm ib_uverbs veth xt_nat xt_tcpudp xt_conntrack nft_chain_nat xt_MASQUERADE nf_] CPU: 3 UID: 0 PID: 5782 Comm: socat Tainted: G W 6.14.0-rc4+ #27 Tainted: [W]=WARN Hardware name: ASUS System Product Name/PRIME Z690-P D4, BIOS 0603 11/01/2021 RIP: 0010:bnxt_rx_pkt+0x479b/0x7610 [bnxt_en] Code: 54 24 0c 4c 89 f1 4c 89 ff c1 ea 1f ff d3 0f 1f 00 49 89 c6 48 85 c0 0f 84 4c e5 ff ff 48 89 c7 e8 ca 3d a0 c8 e9 8f f4 ff ff <0f> 0b f RSP: 0018:ffff88881ba09928 EFLAGS: 00010202 RAX: 0000000000000000 RBX: 00000000c7590303 RCX: 0000000000000000 RDX: 1ffff1104e7d1610 RSI: 0000000000000001 RDI: ffff8881c91300b8 RBP: ffff88881ba09b28 R08: ffff888273e8b0d0 R09: ffff888273e8b070 R10: ffff888273e8b010 R11: ffff888278b0f000 R12: ffff888273e8b080 R13: ffff8881c9130e00 R14: ffff8881505d3800 R15: ffff888273e8b000 FS: 00007f5a2e7be080(0000) GS:ffff88881ba00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fff2e708ff8 CR3: 000000013e3b0000 CR4: 00000000007506f0 PKRU: 55555554 Call Trace: <IRQ> ? __warn+0xcd/0x2f0 ? bnxt_rx_pkt+0x479b/0x7610 ? report_bug+0x326/0x3c0 ? handle_bug+0x53/0xa0 ? exc_invalid_op+0x14/0x50 ? asm_exc_invalid_op+0x16/0x20 ? bnxt_rx_pkt+0x479b/0x7610 ? bnxt_rx_pkt+0x3e41/0x7610 ? __pfx_bnxt_rx_pkt+0x10/0x10 ? napi_complete_done+0x2cf/0x7d0 __bnxt_poll_work+0x4e8/0x1220 ? __pfx___bnxt_poll_work+0x10/0x10 ? __pfx_mark_lock.part.0+0x10/0x10 bnxt_poll_p5+0x36a/0xfa0 ? __pfx_bnxt_poll_p5+0x10/0x10 __napi_poll.constprop.0+0xa0/0x440 net_rx_action+0x899/0xd00 ... Following ping.py patch adds xdp-mb-pass case. so ping.py is going to be able to reproduce this issue.

In the Linux kernel, the following vulnerability has been resolved: ARM: 9170/1: fix panic when kasan and kprobe are enabled arm32 uses software to simulate the instruction replaced by kprobe. some instructions may be simulated by constructing assembly functions. therefore, before executing instruction simulation, it is necessary to construct assembly function execution environment in C language through binding registers. after kasan is enabled, the register binding relationship will be destroyed, resulting in instruction simulation errors and causing kernel panic. the kprobe emulate instruction function is distributed in three files: actions-common.c actions-arm.c actions-thumb.c, so disable KASAN when compiling these files. for example, use kprobe insert on cap_capable+20 after kasan enabled, the cap_capable assembly code is as follows: <cap_capable>: e92d47f0 push {r4, r5, r6, r7, r8, r9, sl, lr} e1a05000 mov r5, r0 e280006c add r0, r0, #108 ; 0x6c e1a04001 mov r4, r1 e1a06002 mov r6, r2 e59fa090 ldr sl, [pc, #144] ; ebfc7bf8 bl c03aa4b4 <__asan_load4> e595706c ldr r7, [r5, #108] ; 0x6c e2859014 add r9, r5, #20 ...... The emulate_ldr assembly code after enabling kasan is as follows: c06f1384 <emulate_ldr>: e92d47f0 push {r4, r5, r6, r7, r8, r9, sl, lr} e282803c add r8, r2, #60 ; 0x3c e1a05000 mov r5, r0 e7e37855 ubfx r7, r5, #16, #4 e1a00008 mov r0, r8 e1a09001 mov r9, r1 e1a04002 mov r4, r2 ebf35462 bl c03c6530 <__asan_load4> e357000f cmp r7, #15 e7e36655 ubfx r6, r5, #12, #4 e205a00f and sl, r5, #15 0a000001 beq c06f13bc <emulate_ldr+0x38> e0840107 add r0, r4, r7, lsl #2 ebf3545c bl c03c6530 <__asan_load4> e084010a add r0, r4, sl, lsl #2 ebf3545a bl c03c6530 <__asan_load4> e2890010 add r0, r9, #16 ebf35458 bl c03c6530 <__asan_load4> e5990010 ldr r0, [r9, #16] e12fff30 blx r0 e356000f cm r6, #15 1a000014 bne c06f1430 <emulate_ldr+0xac> e1a06000 mov r6, r0 e2840040 add r0, r4, #64 ; 0x40 ...... when running in emulate_ldr to simulate the ldr instruction, panic occurred, and the log is as follows: Unable to handle kernel NULL pointer dereference at virtual address 00000090 pgd = ecb46400 [00000090] *pgd=2e0fa003, *pmd=00000000 Internal error: Oops: 206 [#1] SMP ARM PC is at cap_capable+0x14/0xb0 LR is at emulate_ldr+0x50/0xc0 psr: 600d0293 sp : ecd63af8 ip : 00000004 fp : c0a7c30c r10: 00000000 r9 : c30897f4 r8 : ecd63cd4 r7 : 0000000f r6 : 0000000a r5 : e59fa090 r4 : ecd63c98 r3 : c06ae294 r2 : 00000000 r1 : b7611300 r0 : bf4ec008 Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user Control: 32c5387d Table: 2d546400 DAC: 55555555 Process bash (pid: 1643, stack limit = 0xecd60190) (cap_capable) from (kprobe_handler+0x218/0x340) (kprobe_handler) from (kprobe_trap_handler+0x24/0x48) (kprobe_trap_handler) from (do_undefinstr+0x13c/0x364) (do_undefinstr) from (__und_svc_finish+0x0/0x30) (__und_svc_finish) from (cap_capable+0x18/0xb0) (cap_capable) from (cap_vm_enough_memory+0x38/0x48) (cap_vm_enough_memory) from (security_vm_enough_memory_mm+0x48/0x6c) (security_vm_enough_memory_mm) from (copy_process.constprop.5+0x16b4/0x25c8) (copy_process.constprop.5) from (_do_fork+0xe8/0x55c) (_do_fork) from (SyS_clone+0x1c/0x24) (SyS_clone) from (__sys_trace_return+0x0/0x10) Code: 0050a0e1 6c0080e2 0140a0e1 0260a0e1 (f801f0e7)

In the Linux kernel, the following vulnerability has been resolved: filemap: avoid truncating 64-bit offset to 32 bits On 32-bit kernels, folio_seek_hole_data() was inadvertently truncating a 64-bit value to 32 bits, leading to a possible infinite loop when writing to an xfs filesystem.

In the Linux kernel, the following vulnerability has been resolved: w1: fix NULL pointer dereference in probe The w1_uart_probe() function calls w1_uart_serdev_open() (which includes devm_serdev_device_open()) before setting the client ops via serdev_device_set_client_ops(). This ordering can trigger a NULL pointer dereference in the serdev controller's receive_buf handler, as it assumes serdev->ops is valid when SERPORT_ACTIVE is set. This is similar to the issue fixed in commit 5e700b384ec1 ("platform/chrome: cros_ec_uart: properly fix race condition") where devm_serdev_device_open() was called before fully initializing the device. Fix the race by ensuring client ops are set before enabling the port via w1_uart_serdev_open().

In the Linux kernel, the following vulnerability has been resolved: PCI: Fix NULL dereference in SR-IOV VF creation error path Clean up when virtfn setup fails to prevent NULL pointer dereference during device removal. The kernel oops below occurred due to incorrect error handling flow when pci_setup_device() fails. Add pci_iov_scan_device(), which handles virtfn allocation and setup and cleans up if pci_setup_device() fails, so pci_iov_add_virtfn() doesn't need to call pci_stop_and_remove_bus_device(). This prevents accessing partially initialized virtfn devices during removal. BUG: kernel NULL pointer dereference, address: 00000000000000d0 RIP: 0010:device_del+0x3d/0x3d0 Call Trace: pci_remove_bus_device+0x7c/0x100 pci_iov_add_virtfn+0xfa/0x200 sriov_enable+0x208/0x420 mlx5_core_sriov_configure+0x6a/0x160 [mlx5_core] sriov_numvfs_store+0xae/0x1a0 [bhelgaas: commit log, return ERR_PTR(-ENOMEM) directly]

In the Linux kernel, the following vulnerability has been resolved: idpf: check error for register_netdev() on init Current init logic ignores the error code from register_netdev(), which will cause WARN_ON() on attempt to unregister it, if there was one, and there is no info for the user that the creation of the netdev failed. WARNING: CPU: 89 PID: 6902 at net/core/dev.c:11512 unregister_netdevice_many_notify+0x211/0x1a10 ... [ 3707.563641] unregister_netdev+0x1c/0x30 [ 3707.563656] idpf_vport_dealloc+0x5cf/0xce0 [idpf] [ 3707.563684] idpf_deinit_task+0xef/0x160 [idpf] [ 3707.563712] idpf_vc_core_deinit+0x84/0x320 [idpf] [ 3707.563739] idpf_remove+0xbf/0x780 [idpf] [ 3707.563769] pci_device_remove+0xab/0x1e0 [ 3707.563786] device_release_driver_internal+0x371/0x530 [ 3707.563803] driver_detach+0xbf/0x180 [ 3707.563816] bus_remove_driver+0x11b/0x2a0 [ 3707.563829] pci_unregister_driver+0x2a/0x250 Introduce an error check and log the vport number and error code. On removal make sure to check VPORT_REG_NETDEV flag prior to calling unregister and free on the netdev. Add local variables for idx, vport_config and netdev for readability.

In the Linux kernel, the following vulnerability has been resolved: batman-adv: fix panic during interface removal Reference counting is used to ensure that batadv_hardif_neigh_node and batadv_hard_iface are not freed before/during batadv_v_elp_throughput_metric_update work is finished. But there isn't a guarantee that the hard if will remain associated with a soft interface up until the work is finished. This fixes a crash triggered by reboot that looks like this: Call trace: batadv_v_mesh_free+0xd0/0x4dc [batman_adv] batadv_v_elp_throughput_metric_update+0x1c/0xa4 process_one_work+0x178/0x398 worker_thread+0x2e8/0x4d0 kthread+0xd8/0xdc ret_from_fork+0x10/0x20 (the batadv_v_mesh_free call is misleading, and does not actually happen) I was able to make the issue happen more reliably by changing hardif_neigh->bat_v.metric_work work to be delayed work. This allowed me to track down and confirm the fix. [sven@narfation.org: prevent entering batadv_v_elp_get_throughput without soft_iface]

In the Linux kernel, the following vulnerability has been resolved: netmem: prevent TX of unreadable skbs Currently on stable trees we have support for netmem/devmem RX but not TX. It is not safe to forward/redirect an RX unreadable netmem packet into the device's TX path, as the device may call dma-mapping APIs on dma addrs that should not be passed to it. Fix this by preventing the xmit of unreadable skbs. Tested by configuring tc redirect: sudo tc qdisc add dev eth1 ingress sudo tc filter add dev eth1 ingress protocol ip prio 1 flower ip_proto \ tcp src_ip 192.168.1.12 action mirred egress redirect dev eth1 Before, I see unreadable skbs in the driver's TX path passed to dma mapping APIs. After, I don't see unreadable skbs in the driver's TX path passed to dma mapping APIs.

In the Linux kernel, the following vulnerability has been resolved: net: ibmveth: make veth_pool_store stop hanging v2: - Created a single error handling unlock and exit in veth_pool_store - Greatly expanded commit message with previous explanatory-only text Summary: Use rtnl_mutex to synchronize veth_pool_store with itself, ibmveth_close and ibmveth_open, preventing multiple calls in a row to napi_disable. Background: Two (or more) threads could call veth_pool_store through writing to /sys/devices/vio/30000002/pool*/*. You can do this easily with a little shell script. This causes a hang. I configured LOCKDEP, compiled ibmveth.c with DEBUG, and built a new kernel. I ran this test again and saw: Setting pool0/active to 0 Setting pool1/active to 1 [ 73.911067][ T4365] ibmveth 30000002 eth0: close starting Setting pool1/active to 1 Setting pool1/active to 0 [ 73.911367][ T4366] ibmveth 30000002 eth0: close starting [ 73.916056][ T4365] ibmveth 30000002 eth0: close complete [ 73.916064][ T4365] ibmveth 30000002 eth0: open starting [ 110.808564][ T712] systemd-journald[712]: Sent WATCHDOG=1 notification. [ 230.808495][ T712] systemd-journald[712]: Sent WATCHDOG=1 notification. [ 243.683786][ T123] INFO: task stress.sh:4365 blocked for more than 122 seconds. [ 243.683827][ T123] Not tainted 6.14.0-01103-g2df0c02dab82-dirty #8 [ 243.683833][ T123] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 243.683838][ T123] task:stress.sh state:D stack:28096 pid:4365 tgid:4365 ppid:4364 task_flags:0x400040 flags:0x00042000 [ 243.683852][ T123] Call Trace: [ 243.683857][ T123] [c00000000c38f690] [0000000000000001] 0x1 (unreliable) [ 243.683868][ T123] [c00000000c38f840] [c00000000001f908] __switch_to+0x318/0x4e0 [ 243.683878][ T123] [c00000000c38f8a0] [c000000001549a70] __schedule+0x500/0x12a0 [ 243.683888][ T123] [c00000000c38f9a0] [c00000000154a878] schedule+0x68/0x210 [ 243.683896][ T123] [c00000000c38f9d0] [c00000000154ac80] schedule_preempt_disabled+0x30/0x50 [ 243.683904][ T123] [c00000000c38fa00] [c00000000154dbb0] __mutex_lock+0x730/0x10f0 [ 243.683913][ T123] [c00000000c38fb10] [c000000001154d40] napi_enable+0x30/0x60 [ 243.683921][ T123] [c00000000c38fb40] [c000000000f4ae94] ibmveth_open+0x68/0x5dc [ 243.683928][ T123] [c00000000c38fbe0] [c000000000f4aa20] veth_pool_store+0x220/0x270 [ 243.683936][ T123] [c00000000c38fc70] [c000000000826278] sysfs_kf_write+0x68/0xb0 [ 243.683944][ T123] [c00000000c38fcb0] [c0000000008240b8] kernfs_fop_write_iter+0x198/0x2d0 [ 243.683951][ T123] [c00000000c38fd00] [c00000000071b9ac] vfs_write+0x34c/0x650 [ 243.683958][ T123] [c00000000c38fdc0] [c00000000071bea8] ksys_write+0x88/0x150 [ 243.683966][ T123] [c00000000c38fe10] [c0000000000317f4] system_call_exception+0x124/0x340 [ 243.683973][ T123] [c00000000c38fe50] [c00000000000d05c] system_call_vectored_common+0x15c/0x2ec ... [ 243.684087][ T123] Showing all locks held in the system: [ 243.684095][ T123] 1 lock held by khungtaskd/123: [ 243.684099][ T123] #0: c00000000278e370 (rcu_read_lock){....}-{1:2}, at: debug_show_all_locks+0x50/0x248 [ 243.684114][ T123] 4 locks held by stress.sh/4365: [ 243.684119][ T123] #0: c00000003a4cd3f8 (sb_writers#3){.+.+}-{0:0}, at: ksys_write+0x88/0x150 [ 243.684132][ T123] #1: c000000041aea888 (&of->mutex#2){+.+.}-{3:3}, at: kernfs_fop_write_iter+0x154/0x2d0 [ 243.684143][ T123] #2: c0000000366fb9a8 (kn->active#64){.+.+}-{0:0}, at: kernfs_fop_write_iter+0x160/0x2d0 [ 243.684155][ T123] #3: c000000035ff4cb8 (&dev->lock){+.+.}-{3:3}, at: napi_enable+0x30/0x60 [ 243.684166][ T123] 5 locks held by stress.sh/4366: [ 243.684170][ T123] #0: c00000003a4cd3f8 (sb_writers#3){.+.+}-{0:0}, at: ksys_write+0x88/0x150 [ 243. ---truncated---

In the Linux kernel, the following vulnerability has been resolved: gtp: Destroy device along with udp socket's netns dismantle. gtp_newlink() links the device to a list in dev_net(dev) instead of src_net, where a udp tunnel socket is created. Even when src_net is removed, the device stays alive on dev_net(dev). Then, removing src_net triggers the splat below. [0] In this example, gtp0 is created in ns2, and the udp socket is created in ns1. ip netns add ns1 ip netns add ns2 ip -n ns1 link add netns ns2 name gtp0 type gtp role sgsn ip netns del ns1 Let's link the device to the socket's netns instead. Now, gtp_net_exit_batch_rtnl() needs another netdev iteration to remove all gtp devices in the netns. [0]: ref_tracker: net notrefcnt@000000003d6e7d05 has 1/2 users at sk_alloc (./include/net/net_namespace.h:345 net/core/sock.c:2236) inet_create (net/ipv4/af_inet.c:326 net/ipv4/af_inet.c:252) __sock_create (net/socket.c:1558) udp_sock_create4 (net/ipv4/udp_tunnel_core.c:18) gtp_create_sock (./include/net/udp_tunnel.h:59 drivers/net/gtp.c:1423) gtp_create_sockets (drivers/net/gtp.c:1447) gtp_newlink (drivers/net/gtp.c:1507) rtnl_newlink (net/core/rtnetlink.c:3786 net/core/rtnetlink.c:3897 net/core/rtnetlink.c:4012) rtnetlink_rcv_msg (net/core/rtnetlink.c:6922) netlink_rcv_skb (net/netlink/af_netlink.c:2542) netlink_unicast (net/netlink/af_netlink.c:1321 net/netlink/af_netlink.c:1347) netlink_sendmsg (net/netlink/af_netlink.c:1891) ____sys_sendmsg (net/socket.c:711 net/socket.c:726 net/socket.c:2583) ___sys_sendmsg (net/socket.c:2639) __sys_sendmsg (net/socket.c:2669) do_syscall_64 (arch/x86/entry/common.c:52 arch/x86/entry/common.c:83) WARNING: CPU: 1 PID: 60 at lib/ref_tracker.c:179 ref_tracker_dir_exit (lib/ref_tracker.c:179) Modules linked in: CPU: 1 UID: 0 PID: 60 Comm: kworker/u16:2 Not tainted 6.13.0-rc5-00147-g4c1224501e9d #5 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 Workqueue: netns cleanup_net RIP: 0010:ref_tracker_dir_exit (lib/ref_tracker.c:179) Code: 00 00 00 fc ff df 4d 8b 26 49 bd 00 01 00 00 00 00 ad de 4c 39 f5 0f 85 df 00 00 00 48 8b 74 24 08 48 89 df e8 a5 cc 12 02 90 <0f> 0b 90 48 8d 6b 44 be 04 00 00 00 48 89 ef e8 80 de 67 ff 48 89 RSP: 0018:ff11000009a07b60 EFLAGS: 00010286 RAX: 0000000000002bd3 RBX: ff1100000f4e1aa0 RCX: 1ffffffff0e40ac6 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffff8423ee3c RBP: ff1100000f4e1af0 R08: 0000000000000001 R09: fffffbfff0e395ae R10: 0000000000000001 R11: 0000000000036001 R12: ff1100000f4e1af0 R13: dead000000000100 R14: ff1100000f4e1af0 R15: dffffc0000000000 FS: 0000000000000000(0000) GS:ff1100006ce80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f9b2464bd98 CR3: 0000000005286005 CR4: 0000000000771ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> ? __warn (kernel/panic.c:748) ? ref_tracker_dir_exit (lib/ref_tracker.c:179) ? report_bug (lib/bug.c:201 lib/bug.c:219) ? handle_bug (arch/x86/kernel/traps.c:285) ? exc_invalid_op (arch/x86/kernel/traps.c:309 (discriminator 1)) ? asm_exc_invalid_op (./arch/x86/include/asm/idtentry.h:621) ? _raw_spin_unlock_irqrestore (./arch/x86/include/asm/irqflags.h:42 ./arch/x86/include/asm/irqflags.h:97 ./arch/x86/include/asm/irqflags.h:155 ./include/linux/spinlock_api_smp.h:151 kernel/locking/spinlock.c:194) ? ref_tracker_dir_exit (lib/ref_tracker.c:179) ? __pfx_ref_tracker_dir_exit (lib/ref_tracker.c:158) ? kfree (mm/slub.c:4613 mm/slub.c:4761) net_free (net/core/net_namespace.c:476 net/core/net_namespace.c:467) cleanup_net (net/core/net_namespace.c:664 (discriminator 3)) process_one_work (kernel/workqueue.c:3229) worker_thread (kernel/workqueue.c:3304 kernel/workqueue.c:3391 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix deadlock when cloning inline extents and using qgroups There are a few exceptional cases where cloning an inline extent needs to copy the inline extent data into a page of the destination inode. When this happens, we end up starting a transaction while having a dirty page for the destination inode and while having the range locked in the destination's inode iotree too. Because when reserving metadata space for a transaction we may need to flush existing delalloc in case there is not enough free space, we have a mechanism in place to prevent a deadlock, which was introduced in commit 3d45f221ce627d ("btrfs: fix deadlock when cloning inline extent and low on free metadata space"). However when using qgroups, a transaction also reserves metadata qgroup space, which can also result in flushing delalloc in case there is not enough available space at the moment. When this happens we deadlock, since flushing delalloc requires locking the file range in the inode's iotree and the range was already locked at the very beginning of the clone operation, before attempting to start the transaction. When this issue happens, stack traces like the following are reported: [72747.556262] task:kworker/u81:9 state:D stack: 0 pid: 225 ppid: 2 flags:0x00004000 [72747.556268] Workqueue: writeback wb_workfn (flush-btrfs-1142) [72747.556271] Call Trace: [72747.556273] __schedule+0x296/0x760 [72747.556277] schedule+0x3c/0xa0 [72747.556279] io_schedule+0x12/0x40 [72747.556284] __lock_page+0x13c/0x280 [72747.556287] ? generic_file_readonly_mmap+0x70/0x70 [72747.556325] extent_write_cache_pages+0x22a/0x440 [btrfs] [72747.556331] ? __set_page_dirty_nobuffers+0xe7/0x160 [72747.556358] ? set_extent_buffer_dirty+0x5e/0x80 [btrfs] [72747.556362] ? update_group_capacity+0x25/0x210 [72747.556366] ? cpumask_next_and+0x1a/0x20 [72747.556391] extent_writepages+0x44/0xa0 [btrfs] [72747.556394] do_writepages+0x41/0xd0 [72747.556398] __writeback_single_inode+0x39/0x2a0 [72747.556403] writeback_sb_inodes+0x1ea/0x440 [72747.556407] __writeback_inodes_wb+0x5f/0xc0 [72747.556410] wb_writeback+0x235/0x2b0 [72747.556414] ? get_nr_inodes+0x35/0x50 [72747.556417] wb_workfn+0x354/0x490 [72747.556420] ? newidle_balance+0x2c5/0x3e0 [72747.556424] process_one_work+0x1aa/0x340 [72747.556426] worker_thread+0x30/0x390 [72747.556429] ? create_worker+0x1a0/0x1a0 [72747.556432] kthread+0x116/0x130 [72747.556435] ? kthread_park+0x80/0x80 [72747.556438] ret_from_fork+0x1f/0x30 [72747.566958] Workqueue: btrfs-flush_delalloc btrfs_work_helper [btrfs] [72747.566961] Call Trace: [72747.566964] __schedule+0x296/0x760 [72747.566968] ? finish_wait+0x80/0x80 [72747.566970] schedule+0x3c/0xa0 [72747.566995] wait_extent_bit.constprop.68+0x13b/0x1c0 [btrfs] [72747.566999] ? finish_wait+0x80/0x80 [72747.567024] lock_extent_bits+0x37/0x90 [btrfs] [72747.567047] btrfs_invalidatepage+0x299/0x2c0 [btrfs] [72747.567051] ? find_get_pages_range_tag+0x2cd/0x380 [72747.567076] __extent_writepage+0x203/0x320 [btrfs] [72747.567102] extent_write_cache_pages+0x2bb/0x440 [btrfs] [72747.567106] ? update_load_avg+0x7e/0x5f0 [72747.567109] ? enqueue_entity+0xf4/0x6f0 [72747.567134] extent_writepages+0x44/0xa0 [btrfs] [72747.567137] ? enqueue_task_fair+0x93/0x6f0 [72747.567140] do_writepages+0x41/0xd0 [72747.567144] __filemap_fdatawrite_range+0xc7/0x100 [72747.567167] btrfs_run_delalloc_work+0x17/0x40 [btrfs] [72747.567195] btrfs_work_helper+0xc2/0x300 [btrfs] [72747.567200] process_one_work+0x1aa/0x340 [72747.567202] worker_thread+0x30/0x390 [72747.567205] ? create_worker+0x1a0/0x1a0 [72747.567208] kthread+0x116/0x130 [72747.567211] ? kthread_park+0x80/0x80 [72747.567214] ret_from_fork+0x1f/0x30 [72747.569686] task:fsstress state:D stack: ---truncated---

In the Linux kernel, the following vulnerability has been resolved: NFSD: fix hang in nfsd4_shutdown_callback If nfs4_client is in courtesy state then there is no point to send the callback. This causes nfsd4_shutdown_callback to hang since cl_cb_inflight is not 0. This hang lasts about 15 minutes until TCP notifies NFSD that the connection was dropped. This patch modifies nfsd4_run_cb_work to skip the RPC call if nfs4_client is in courtesy state.

In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Update error handler for UCTX and UMEM In the fast unload flow, the device state is set to internal error, which indicates that the driver started the destroy process. In this case, when a destroy command is being executed, it should return MLX5_CMD_STAT_OK. Fix MLX5_CMD_OP_DESTROY_UCTX and MLX5_CMD_OP_DESTROY_UMEM to return OK instead of EIO. This fixes a call trace in the umem release process - [ 2633.536695] Call Trace: [ 2633.537518] ib_uverbs_remove_one+0xc3/0x140 [ib_uverbs] [ 2633.538596] remove_client_context+0x8b/0xd0 [ib_core] [ 2633.539641] disable_device+0x8c/0x130 [ib_core] [ 2633.540615] __ib_unregister_device+0x35/0xa0 [ib_core] [ 2633.541640] ib_unregister_device+0x21/0x30 [ib_core] [ 2633.542663] __mlx5_ib_remove+0x38/0x90 [mlx5_ib] [ 2633.543640] auxiliary_bus_remove+0x1e/0x30 [auxiliary] [ 2633.544661] device_release_driver_internal+0x103/0x1f0 [ 2633.545679] bus_remove_device+0xf7/0x170 [ 2633.546640] device_del+0x181/0x410 [ 2633.547606] mlx5_rescan_drivers_locked.part.10+0x63/0x160 [mlx5_core] [ 2633.548777] mlx5_unregister_device+0x27/0x40 [mlx5_core] [ 2633.549841] mlx5_uninit_one+0x21/0xc0 [mlx5_core] [ 2633.550864] remove_one+0x69/0xe0 [mlx5_core] [ 2633.551819] pci_device_remove+0x3b/0xc0 [ 2633.552731] device_release_driver_internal+0x103/0x1f0 [ 2633.553746] unbind_store+0xf6/0x130 [ 2633.554657] kernfs_fop_write+0x116/0x190 [ 2633.555567] vfs_write+0xa5/0x1a0 [ 2633.556407] ksys_write+0x4f/0xb0 [ 2633.557233] do_syscall_64+0x5b/0x1a0 [ 2633.558071] entry_SYSCALL_64_after_hwframe+0x65/0xca [ 2633.559018] RIP: 0033:0x7f9977132648 [ 2633.559821] Code: 89 02 48 c7 c0 ff ff ff ff eb b3 0f 1f 80 00 00 00 00 f3 0f 1e fa 48 8d 05 55 6f 2d 00 8b 00 85 c0 75 17 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 58 c3 0f 1f 80 00 00 00 00 41 54 49 89 d4 55 [ 2633.562332] RSP: 002b:00007fffb1a83888 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 2633.563472] RAX: ffffffffffffffda RBX: 000000000000000c RCX: 00007f9977132648 [ 2633.564541] RDX: 000000000000000c RSI: 000055b90546e230 RDI: 0000000000000001 [ 2633.565596] RBP: 000055b90546e230 R08: 00007f9977406860 R09: 00007f9977a54740 [ 2633.566653] R10: 0000000000000000 R11: 0000000000000246 R12: 00007f99774056e0 [ 2633.567692] R13: 000000000000000c R14: 00007f9977400880 R15: 000000000000000c [ 2633.568725] ---[ end trace 10b4fe52945e544d ]---

In the Linux kernel, the following vulnerability has been resolved: dpll: fix xa_alloc_cyclic() error handling In case of returning 1 from xa_alloc_cyclic() (wrapping) ERR_PTR(1) will be returned, which will cause IS_ERR() to be false. Which can lead to dereference not allocated pointer (pin). Fix it by checking if err is lower than zero. This wasn't found in real usecase, only noticed. Credit to Pierre.

In the Linux kernel, the following vulnerability has been resolved: drm/v3d: Ensure job pointer is set to NULL after job completion After a job completes, the corresponding pointer in the device must be set to NULL. Failing to do so triggers a warning when unloading the driver, as it appears the job is still active. To prevent this, assign the job pointer to NULL after completing the job, indicating the job has finished.

In the Linux kernel, the following vulnerability has been resolved: net: decrease cached dst counters in dst_release Upstream fix ac888d58869b ("net: do not delay dst_entries_add() in dst_release()") moved decrementing the dst count from dst_destroy to dst_release to avoid accessing already freed data in case of netns dismantle. However in case CONFIG_DST_CACHE is enabled and OvS+tunnels are used, this fix is incomplete as the same issue will be seen for cached dsts: Unable to handle kernel paging request at virtual address ffff5aabf6b5c000 Call trace: percpu_counter_add_batch+0x3c/0x160 (P) dst_release+0xec/0x108 dst_cache_destroy+0x68/0xd8 dst_destroy+0x13c/0x168 dst_destroy_rcu+0x1c/0xb0 rcu_do_batch+0x18c/0x7d0 rcu_core+0x174/0x378 rcu_core_si+0x18/0x30 Fix this by invalidating the cache, and thus decrementing cached dst counters, in dst_release too.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: fix missing .is_two_pixels_per_container Starting from 6.11, AMDGPU driver, while being loaded with amdgpu.dc=1, due to lack of .is_two_pixels_per_container function in dce60_tg_funcs, causes a NULL pointer dereference on PCs with old GPUs, such as R9 280X. So this fix adds missing .is_two_pixels_per_container to dce60_tg_funcs. (cherry picked from commit bd4b125eb949785c6f8a53b0494e32795421209d)

In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: ipc4-topology: Harden loops for looking up ALH copiers Other, non DAI copier widgets could have the same stream name (sname) as the ALH copier and in that case the copier->data is NULL, no alh_data is attached, which could lead to NULL pointer dereference. We could check for this NULL pointer in sof_ipc4_prepare_copier_module() and avoid the crash, but a similar loop in sof_ipc4_widget_setup_comp_dai() will miscalculate the ALH device count, causing broken audio. The correct fix is to harden the matching logic by making sure that the 1. widget is a DAI widget - so dai = w->private is valid 2. the dai (and thus the copier) is ALH copier

In the Linux kernel, the following vulnerability has been resolved: cifs: Fix integer overflow while processing closetimeo mount option User-provided mount parameter closetimeo of type u32 is intended to have an upper limit, but before it is validated, the value is converted from seconds to jiffies which can lead to an integer overflow. Found by Linux Verification Center (linuxtesting.org) with SVACE.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Assign normalized_pix_clk when color depth = 14 [WHY & HOW] A warning message "WARNING: CPU: 4 PID: 459 at ... /dc_resource.c:3397 calculate_phy_pix_clks+0xef/0x100 [amdgpu]" occurs because the display_color_depth == COLOR_DEPTH_141414 is not handled. This is observed in Radeon RX 6600 XT. It is fixed by assigning pix_clk * (14 * 3) / 24 - same as the rests. Also fixes the indentation in get_norm_pix_clk. (cherry picked from commit 274a87eb389f58eddcbc5659ab0b180b37e92775)

In the Linux kernel, the following vulnerability has been resolved: wifi: rtw89: avoid to init mgnt_entry list twice when WoWLAN failed If WoWLAN failed in resume flow, the rtw89_ops_add_interface() triggered without removing the interface first. Then the mgnt_entry list init again, causing the list_empty() check in rtw89_chanctx_ops_assign_vif() useless, and list_add_tail() again. Therefore, we have added a check to prevent double adding of the list. rtw89_8852ce 0000:01:00.0: failed to check wow status disabled rtw89_8852ce 0000:01:00.0: wow: failed to check disable fw ready rtw89_8852ce 0000:01:00.0: wow: failed to swap to normal fw rtw89_8852ce 0000:01:00.0: failed to disable wow rtw89_8852ce 0000:01:00.0: failed to resume for wow -110 rtw89_8852ce 0000:01:00.0: MAC has already powered on i2c_hid_acpi i2c-ILTK0001:00: PM: acpi_subsys_resume+0x0/0x60 returned 0 after 284705 usecs list_add corruption. prev->next should be next (ffff9d9719d82228), but was ffff9d9719f96030. (prev=ffff9d9719f96030). ------------[ cut here ]------------ kernel BUG at lib/list_debug.c:34! invalid opcode: 0000 [#1] PREEMPT SMP NOPTI CPU: 2 PID: 6918 Comm: kworker/u8:19 Tainted: G U O Hardware name: Google Anraggar/Anraggar, BIOS Google_Anraggar.15217.514.0 03/25/2024 Workqueue: events_unbound async_run_entry_fn RIP: 0010:__list_add_valid_or_report+0x9f/0xb0 Code: e8 56 89 ff ff 0f 0b 48 c7 c7 3e fc e0 96 48 89 c6 e8 45 89 ff ... RSP: 0018:ffffa51b42bbbaf0 EFLAGS: 00010246 RAX: 0000000000000075 RBX: ffff9d9719d82ab0 RCX: 13acb86e047a4400 RDX: 3fffffffffffffff RSI: 0000000000000000 RDI: 00000000ffffdfff RBP: ffffa51b42bbbb28 R08: ffffffff9768e250 R09: 0000000000001fff R10: ffffffff9765e250 R11: 0000000000005ffd R12: ffff9d9719f95c40 R13: ffff9d9719f95be8 R14: ffff9d97081bfd78 R15: ffff9d9719d82060 FS: 0000000000000000(0000) GS:ffff9d9a6fb00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007e7d029a4060 CR3: 0000000345e38000 CR4: 0000000000750ee0 PKRU: 55555554 Call Trace: <TASK> ? __die_body+0x68/0xb0 ? die+0xaa/0xd0 ? do_trap+0x9f/0x170 ? __list_add_valid_or_report+0x9f/0xb0 ? __list_add_valid_or_report+0x9f/0xb0 ? handle_invalid_op+0x69/0x90 ? __list_add_valid_or_report+0x9f/0xb0 ? exc_invalid_op+0x3c/0x50 ? asm_exc_invalid_op+0x16/0x20 ? __list_add_valid_or_report+0x9f/0xb0 rtw89_chanctx_ops_assign_vif+0x1f9/0x210 [rtw89_core cbb375c44bf28564ce479002bff66617a25d9ac1] ? __mutex_unlock_slowpath+0xa0/0xf0 rtw89_ops_assign_vif_chanctx+0x4b/0x90 [rtw89_core cbb375c44bf28564ce479002bff66617a25d9ac1] drv_assign_vif_chanctx+0xa7/0x1f0 [mac80211 6efaad16237edaaea0868b132d4f93ecf918a8b6] ieee80211_reconfig+0x9cb/0x17b0 [mac80211 6efaad16237edaaea0868b132d4f93ecf918a8b6] ? __pfx_wiphy_resume+0x10/0x10 [cfg80211 572d03acaaa933fe38251be7fce3b3675284b8ed] ? dev_printk_emit+0x51/0x70 ? _dev_info+0x6e/0x90 wiphy_resume+0x89/0x180 [cfg80211 572d03acaaa933fe38251be7fce3b3675284b8ed] ? __pfx_wiphy_resume+0x10/0x10 [cfg80211 572d03acaaa933fe38251be7fce3b3675284b8ed] dpm_run_callback+0x37/0x1e0 device_resume+0x26d/0x4b0 ? __pfx_dpm_watchdog_handler+0x10/0x10 async_resume+0x1d/0x30 async_run_entry_fn+0x29/0xd0 worker_thread+0x397/0x970 kthread+0xed/0x110 ? __pfx_worker_thread+0x10/0x10 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x38/0x50 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1b/0x30 </TASK>

In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Clear port select structure when fail to create Clear the port select structure on error so no stale values left after definers are destroyed. That's because the mlx5_lag_destroy_definers() always try to destroy all lag definers in the tt_map, so in the flow below lag definers get double-destroyed and cause kernel crash: mlx5_lag_port_sel_create() mlx5_lag_create_definers() mlx5_lag_create_definer() <- Failed on tt 1 mlx5_lag_destroy_definers() <- definers[tt=0] gets destroyed mlx5_lag_port_sel_create() mlx5_lag_create_definers() mlx5_lag_create_definer() <- Failed on tt 0 mlx5_lag_destroy_definers() <- definers[tt=0] gets double-destroyed Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008 Mem abort info: ESR = 0x0000000096000005 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x05: level 1 translation fault Data abort info: ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000 CM = 0, WnR = 0, TnD = 0, TagAccess = 0 GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 user pgtable: 64k pages, 48-bit VAs, pgdp=0000000112ce2e00 [0000000000000008] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000 Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP Modules linked in: iptable_raw bonding ip_gre ip6_gre gre ip6_tunnel tunnel6 geneve ip6_udp_tunnel udp_tunnel ipip tunnel4 ip_tunnel rdma_ucm(OE) rdma_cm(OE) iw_cm(OE) ib_ipoib(OE) ib_cm(OE) ib_umad(OE) mlx5_ib(OE) ib_uverbs(OE) mlx5_fwctl(OE) fwctl(OE) mlx5_core(OE) mlxdevm(OE) ib_core(OE) mlxfw(OE) memtrack(OE) mlx_compat(OE) openvswitch nsh nf_conncount psample xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xfrm_user xfrm_algo xt_addrtype iptable_filter iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 br_netfilter bridge stp llc netconsole overlay efi_pstore sch_fq_codel zram ip_tables crct10dif_ce qemu_fw_cfg fuse ipv6 crc_ccitt [last unloaded: mlx_compat(OE)] CPU: 3 UID: 0 PID: 217 Comm: kworker/u53:2 Tainted: G OE 6.11.0+ #2 Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015 Workqueue: mlx5_lag mlx5_do_bond_work [mlx5_core] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : mlx5_del_flow_rules+0x24/0x2c0 [mlx5_core] lr : mlx5_lag_destroy_definer+0x54/0x100 [mlx5_core] sp : ffff800085fafb00 x29: ffff800085fafb00 x28: ffff0000da0c8000 x27: 0000000000000000 x26: ffff0000da0c8000 x25: ffff0000da0c8000 x24: ffff0000da0c8000 x23: ffff0000c31f81a0 x22: 0400000000000000 x21: ffff0000da0c8000 x20: 0000000000000000 x19: 0000000000000001 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 0000ffff8b0c9350 x14: 0000000000000000 x13: ffff800081390d18 x12: ffff800081dc3cc0 x11: 0000000000000001 x10: 0000000000000b10 x9 : ffff80007ab7304c x8 : ffff0000d00711f0 x7 : 0000000000000004 x6 : 0000000000000190 x5 : ffff00027edb3010 x4 : 0000000000000000 x3 : 0000000000000000 x2 : ffff0000d39b8000 x1 : ffff0000d39b8000 x0 : 0400000000000000 Call trace: mlx5_del_flow_rules+0x24/0x2c0 [mlx5_core] mlx5_lag_destroy_definer+0x54/0x100 [mlx5_core] mlx5_lag_destroy_definers+0xa0/0x108 [mlx5_core] mlx5_lag_port_sel_create+0x2d4/0x6f8 [mlx5_core] mlx5_activate_lag+0x60c/0x6f8 [mlx5_core] mlx5_do_bond_work+0x284/0x5c8 [mlx5_core] process_one_work+0x170/0x3e0 worker_thread+0x2d8/0x3e0 kthread+0x11c/0x128 ret_from_fork+0x10/0x20 Code: a9025bf5 aa0003f6 a90363f7 f90023f9 (f9400400) ---[ end trace 0000000000000000 ]---

In the Linux kernel, the following vulnerability has been resolved: mt76: connac: fix kernel warning adding monitor interface Fix the following kernel warning adding a monitor interface in mt76_connac_mcu_uni_add_dev routine. [ 507.984882] ------------[ cut here ]------------ [ 507.989515] WARNING: CPU: 1 PID: 3017 at mt76_connac_mcu_uni_add_dev+0x178/0x190 [mt76_connac_lib] [ 508.059379] CPU: 1 PID: 3017 Comm: ifconfig Not tainted 5.4.98 #0 [ 508.065461] Hardware name: MT7622_MT7531 RFB (DT) [ 508.070156] pstate: 80000005 (Nzcv daif -PAN -UAO) [ 508.074939] pc : mt76_connac_mcu_uni_add_dev+0x178/0x190 [mt76_connac_lib] [ 508.081806] lr : mt7921_eeprom_init+0x1288/0x1cb8 [mt7921e] [ 508.087367] sp : ffffffc013a33930 [ 508.090671] x29: ffffffc013a33930 x28: ffffff801e628ac0 [ 508.095973] x27: ffffff801c7f1200 x26: ffffff801c7eb008 [ 508.101275] x25: ffffff801c7eaef0 x24: ffffff801d025610 [ 508.106577] x23: ffffff801d022990 x22: ffffff801d024de8 [ 508.111879] x21: ffffff801d0226a0 x20: ffffff801c7eaee8 [ 508.117181] x19: ffffff801d0226a0 x18: 000000005d00b000 [ 508.122482] x17: 00000000ffffffff x16: 0000000000000000 [ 508.127785] x15: 0000000000000080 x14: ffffff801d704000 [ 508.133087] x13: 0000000000000040 x12: 0000000000000002 [ 508.138389] x11: 000000000000000c x10: 0000000000000000 [ 508.143691] x9 : 0000000000000020 x8 : 0000000000000001 [ 508.148992] x7 : 0000000000000000 x6 : 0000000000000000 [ 508.154294] x5 : ffffff801c7eaee8 x4 : 0000000000000006 [ 508.159596] x3 : 0000000000000001 x2 : 0000000000000000 [ 508.164898] x1 : ffffff801c7eac08 x0 : ffffff801d0226a0 [ 508.170200] Call trace: [ 508.172640] mt76_connac_mcu_uni_add_dev+0x178/0x190 [mt76_connac_lib] [ 508.179159] mt7921_eeprom_init+0x1288/0x1cb8 [mt7921e] [ 508.184394] drv_add_interface+0x34/0x88 [mac80211] [ 508.189271] ieee80211_add_virtual_monitor+0xe0/0xb48 [mac80211] [ 508.195277] ieee80211_do_open+0x86c/0x918 [mac80211] [ 508.200328] ieee80211_do_open+0x900/0x918 [mac80211] [ 508.205372] __dev_open+0xcc/0x150 [ 508.208763] __dev_change_flags+0x134/0x198 [ 508.212937] dev_change_flags+0x20/0x60 [ 508.216764] devinet_ioctl+0x3e8/0x748 [ 508.220503] inet_ioctl+0x1e4/0x350 [ 508.223983] sock_do_ioctl+0x48/0x2a0 [ 508.227635] sock_ioctl+0x310/0x4f8 [ 508.231116] do_vfs_ioctl+0xa4/0xac0 [ 508.234681] ksys_ioctl+0x44/0x90 [ 508.237985] __arm64_sys_ioctl+0x1c/0x48 [ 508.241901] el0_svc_common.constprop.1+0x7c/0x100 [ 508.246681] el0_svc_handler+0x18/0x20 [ 508.250421] el0_svc+0x8/0x1c8 [ 508.253465] ---[ end trace c7b90fee13d72c39 ]--- [ 508.261278] ------------[ cut here ]------------

In the Linux kernel, the following vulnerability has been resolved: block: fix queue freeze vs limits lock order in sysfs store methods queue_attr_store() always freezes a device queue before calling the attribute store operation. For attributes that control queue limits, the store operation will also lock the queue limits with a call to queue_limits_start_update(). However, some drivers (e.g. SCSI sd) may need to issue commands to a device to obtain limit values from the hardware with the queue limits locked. This creates a potential ABBA deadlock situation if a user attempts to modify a limit (thus freezing the device queue) while the device driver starts a revalidation of the device queue limits. Avoid such deadlock by not freezing the queue before calling the ->store_limit() method in struct queue_sysfs_entry and instead use the queue_limits_commit_update_frozen helper to freeze the queue after taking the limits lock. This also removes taking the sysfs lock for the store_limit method as it doesn't protect anything here, but creates even more nesting. Hopefully it will go away from the actual sysfs methods entirely soon. (commit log adapted from a similar patch from Damien Le Moal)

In the Linux kernel, the following vulnerability has been resolved: vxlan: Fix uninit-value in vxlan_vnifilter_dump() KMSAN reported an uninit-value access in vxlan_vnifilter_dump() [1]. If the length of the netlink message payload is less than sizeof(struct tunnel_msg), vxlan_vnifilter_dump() accesses bytes beyond the message. This can lead to uninit-value access. Fix this by returning an error in such situations. [1] BUG: KMSAN: uninit-value in vxlan_vnifilter_dump+0x328/0x920 drivers/net/vxlan/vxlan_vnifilter.c:422 vxlan_vnifilter_dump+0x328/0x920 drivers/net/vxlan/vxlan_vnifilter.c:422 rtnl_dumpit+0xd5/0x2f0 net/core/rtnetlink.c:6786 netlink_dump+0x93e/0x15f0 net/netlink/af_netlink.c:2317 __netlink_dump_start+0x716/0xd60 net/netlink/af_netlink.c:2432 netlink_dump_start include/linux/netlink.h:340 [inline] rtnetlink_dump_start net/core/rtnetlink.c:6815 [inline] rtnetlink_rcv_msg+0x1256/0x14a0 net/core/rtnetlink.c:6882 netlink_rcv_skb+0x467/0x660 net/netlink/af_netlink.c:2542 rtnetlink_rcv+0x35/0x40 net/core/rtnetlink.c:6944 netlink_unicast_kernel net/netlink/af_netlink.c:1321 [inline] netlink_unicast+0xed6/0x1290 net/netlink/af_netlink.c:1347 netlink_sendmsg+0x1092/0x1230 net/netlink/af_netlink.c:1891 sock_sendmsg_nosec net/socket.c:711 [inline] __sock_sendmsg+0x330/0x3d0 net/socket.c:726 ____sys_sendmsg+0x7f4/0xb50 net/socket.c:2583 ___sys_sendmsg+0x271/0x3b0 net/socket.c:2637 __sys_sendmsg net/socket.c:2669 [inline] __do_sys_sendmsg net/socket.c:2674 [inline] __se_sys_sendmsg net/socket.c:2672 [inline] __x64_sys_sendmsg+0x211/0x3e0 net/socket.c:2672 x64_sys_call+0x3878/0x3d90 arch/x86/include/generated/asm/syscalls_64.h:47 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xd9/0x1d0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Uninit was created at: slab_post_alloc_hook mm/slub.c:4110 [inline] slab_alloc_node mm/slub.c:4153 [inline] kmem_cache_alloc_node_noprof+0x800/0xe80 mm/slub.c:4205 kmalloc_reserve+0x13b/0x4b0 net/core/skbuff.c:587 __alloc_skb+0x347/0x7d0 net/core/skbuff.c:678 alloc_skb include/linux/skbuff.h:1323 [inline] netlink_alloc_large_skb+0xa5/0x280 net/netlink/af_netlink.c:1196 netlink_sendmsg+0xac9/0x1230 net/netlink/af_netlink.c:1866 sock_sendmsg_nosec net/socket.c:711 [inline] __sock_sendmsg+0x330/0x3d0 net/socket.c:726 ____sys_sendmsg+0x7f4/0xb50 net/socket.c:2583 ___sys_sendmsg+0x271/0x3b0 net/socket.c:2637 __sys_sendmsg net/socket.c:2669 [inline] __do_sys_sendmsg net/socket.c:2674 [inline] __se_sys_sendmsg net/socket.c:2672 [inline] __x64_sys_sendmsg+0x211/0x3e0 net/socket.c:2672 x64_sys_call+0x3878/0x3d90 arch/x86/include/generated/asm/syscalls_64.h:47 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xd9/0x1d0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f CPU: 0 UID: 0 PID: 30991 Comm: syz.4.10630 Not tainted 6.12.0-10694-gc44daa7e3c73 #29 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-3.fc41 04/01/2014

In the Linux kernel, the following vulnerability has been resolved: RDMA/mlx5: Fix a WARN during dereg_mr for DM type Memory regions (MR) of type DM (device memory) do not have an associated umem. In the __mlx5_ib_dereg_mr() -> mlx5_free_priv_descs() flow, the code incorrectly takes the wrong branch, attempting to call dma_unmap_single() on a DMA address that is not mapped. This results in a WARN [1], as shown below. The issue is resolved by properly accounting for the DM type and ensuring the correct branch is selected in mlx5_free_priv_descs(). [1] WARNING: CPU: 12 PID: 1346 at drivers/iommu/dma-iommu.c:1230 iommu_dma_unmap_page+0x79/0x90 Modules linked in: ip6table_mangle ip6table_nat ip6table_filter ip6_tables iptable_mangle xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_nat nf_nat br_netfilter rpcsec_gss_krb5 auth_rpcgss oid_registry ovelay rpcrdma rdma_ucm ib_iser libiscsi scsi_transport_iscsi ib_umad rdma_cm ib_ipoib iw_cm ib_cm mlx5_ib ib_uverbs ib_core fuse mlx5_core CPU: 12 UID: 0 PID: 1346 Comm: ibv_rc_pingpong Not tainted 6.12.0-rc7+ #1631 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:iommu_dma_unmap_page+0x79/0x90 Code: 2b 49 3b 29 72 26 49 3b 69 08 73 20 4d 89 f0 44 89 e9 4c 89 e2 48 89 ee 48 89 df 5b 5d 41 5c 41 5d 41 5e 41 5f e9 07 b8 88 ff <0f> 0b 5b 5d 41 5c 41 5d 41 5e 41 5f c3 cc cc cc cc 66 0f 1f 44 00 RSP: 0018:ffffc90001913a10 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff88810194b0a8 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000001 RBP: ffff88810194b0a8 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000001 R14: 0000000000000000 R15: 0000000000000000 FS: 00007f537abdd740(0000) GS:ffff88885fb00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f537aeb8000 CR3: 000000010c248001 CR4: 0000000000372eb0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ? __warn+0x84/0x190 ? iommu_dma_unmap_page+0x79/0x90 ? report_bug+0xf8/0x1c0 ? handle_bug+0x55/0x90 ? exc_invalid_op+0x13/0x60 ? asm_exc_invalid_op+0x16/0x20 ? iommu_dma_unmap_page+0x79/0x90 dma_unmap_page_attrs+0xe6/0x290 mlx5_free_priv_descs+0xb0/0xe0 [mlx5_ib] __mlx5_ib_dereg_mr+0x37e/0x520 [mlx5_ib] ? _raw_spin_unlock_irq+0x24/0x40 ? wait_for_completion+0xfe/0x130 ? rdma_restrack_put+0x63/0xe0 [ib_core] ib_dereg_mr_user+0x5f/0x120 [ib_core] ? lock_release+0xc6/0x280 destroy_hw_idr_uobject+0x1d/0x60 [ib_uverbs] uverbs_destroy_uobject+0x58/0x1d0 [ib_uverbs] uobj_destroy+0x3f/0x70 [ib_uverbs] ib_uverbs_cmd_verbs+0x3e4/0xbb0 [ib_uverbs] ? __pfx_uverbs_destroy_def_handler+0x10/0x10 [ib_uverbs] ? lock_acquire+0xc1/0x2f0 ? ib_uverbs_ioctl+0xcb/0x170 [ib_uverbs] ? ib_uverbs_ioctl+0x116/0x170 [ib_uverbs] ? lock_release+0xc6/0x280 ib_uverbs_ioctl+0xe7/0x170 [ib_uverbs] ? ib_uverbs_ioctl+0xcb/0x170 [ib_uverbs] __x64_sys_ioctl+0x1b0/0xa70 do_syscall_64+0x6b/0x140 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7f537adaf17b Code: 0f 1e fa 48 8b 05 1d ad 0c 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 0f 1f 44 00 00 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d ed ac 0c 00 f7 d8 64 89 01 48 RSP: 002b:00007ffff218f0b8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007ffff218f1d8 RCX: 00007f537adaf17b RDX: 00007ffff218f1c0 RSI: 00000000c0181b01 RDI: 0000000000000003 RBP: 00007ffff218f1a0 R08: 00007f537aa8d010 R09: 0000561ee2e4f270 R10: 00007f537aace3a8 R11: 0000000000000246 R12: 00007ffff218f190 R13: 000000000000001c R14: 0000561ee2e4d7c0 R15: 00007ffff218f450 </TASK>

In the Linux kernel, the following vulnerability has been resolved: scsi: mpi3mr: Fix possible crash when setting up bsg fails If bsg_setup_queue() fails, the bsg_queue is assigned a non-NULL value. Consequently, in mpi3mr_bsg_exit(), the condition "if(!mrioc->bsg_queue)" will not be satisfied, preventing execution from entering bsg_remove_queue(), which could lead to the following crash: BUG: kernel NULL pointer dereference, address: 000000000000041c Call Trace: <TASK> mpi3mr_bsg_exit+0x1f/0x50 [mpi3mr] mpi3mr_remove+0x6f/0x340 [mpi3mr] pci_device_remove+0x3f/0xb0 device_release_driver_internal+0x19d/0x220 unbind_store+0xa4/0xb0 kernfs_fop_write_iter+0x11f/0x200 vfs_write+0x1fc/0x3e0 ksys_write+0x67/0xe0 do_syscall_64+0x38/0x80 entry_SYSCALL_64_after_hwframe+0x78/0xe2

In the Linux kernel, the following vulnerability has been resolved: block: fix adding folio to bio >4GB folio is possible on some ARCHs, such as aarch64, 16GB hugepage is supported, then 'offset' of folio can't be held in 'unsigned int', cause warning in bio_add_folio_nofail() and IO failure. Fix it by adjusting 'page' & trimming 'offset' so that `->bi_offset` won't be overflow, and folio can be added to bio successfully.

In the Linux kernel, the following vulnerability has been resolved: exfat: fix missing shutdown check xfstests generic/730 test failed because after deleting the device that still had dirty data, the file could still be read without returning an error. The reason is the missing shutdown check in ->read_iter. I also noticed that shutdown checks were missing from ->write_iter, ->splice_read, and ->mmap. This commit adds shutdown checks to all of them.

In the Linux kernel, the following vulnerability has been resolved: timers/migration: Fix off-by-one root mis-connection Before attaching a new root to the old root, the children counter of the new root is checked to verify that only the upcoming CPU's top group have been connected to it. However since the recently added commit b729cc1ec21a ("timers/migration: Fix another race between hotplug and idle entry/exit") this check is not valid anymore because the old root is pre-accounted as a child to the new root. Therefore after connecting the upcoming CPU's top group to the new root, the children count to be expected must be 2 and not 1 anymore. This omission results in the old root to not be connected to the new root. Then eventually the system may run with more than one top level, which defeats the purpose of a single idle migrator. Also the old root is pre-accounted but not connected upon the new root creation. But it can be connected to the new root later on. Therefore the old root may be accounted twice to the new root. The propagation of such overcommit can end up creating a double final top-level root with a groupmask incorrectly initialized. Although harmless given that the final top level roots will never have a parent to walk up to, this oddity opportunistically reported the core issue: WARNING: CPU: 8 PID: 0 at kernel/time/timer_migration.c:543 tmigr_requires_handle_remote CPU: 8 UID: 0 PID: 0 Comm: swapper/8 RIP: 0010:tmigr_requires_handle_remote Call Trace: <IRQ> ? tmigr_requires_handle_remote ? hrtimer_run_queues update_process_times tick_periodic tick_handle_periodic __sysvec_apic_timer_interrupt sysvec_apic_timer_interrupt </IRQ> Fix the problem by taking the old root into account in the children count of the new root so the connection is not omitted. Also warn when more than one top level group exists to better detect similar issues in the future.

In the Linux kernel, the following vulnerability has been resolved: llc: do not use skb_get() before dev_queue_xmit() syzbot is able to crash hosts [1], using llc and devices not supporting IFF_TX_SKB_SHARING. In this case, e1000 driver calls eth_skb_pad(), while the skb is shared. Simply replace skb_get() by skb_clone() in net/llc/llc_s_ac.c Note that e1000 driver might have an issue with pktgen, because it does not clear IFF_TX_SKB_SHARING, this is an orthogonal change. We need to audit other skb_get() uses in net/llc. [1] kernel BUG at net/core/skbuff.c:2178 ! Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN NOPTI CPU: 0 UID: 0 PID: 16371 Comm: syz.2.2764 Not tainted 6.14.0-rc4-syzkaller-00052-gac9c34d1e45a #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 RIP: 0010:pskb_expand_head+0x6ce/0x1240 net/core/skbuff.c:2178 Call Trace: <TASK> __skb_pad+0x18a/0x610 net/core/skbuff.c:2466 __skb_put_padto include/linux/skbuff.h:3843 [inline] skb_put_padto include/linux/skbuff.h:3862 [inline] eth_skb_pad include/linux/etherdevice.h:656 [inline] e1000_xmit_frame+0x2d99/0x5800 drivers/net/ethernet/intel/e1000/e1000_main.c:3128 __netdev_start_xmit include/linux/netdevice.h:5151 [inline] netdev_start_xmit include/linux/netdevice.h:5160 [inline] xmit_one net/core/dev.c:3806 [inline] dev_hard_start_xmit+0x9a/0x7b0 net/core/dev.c:3822 sch_direct_xmit+0x1ae/0xc30 net/sched/sch_generic.c:343 __dev_xmit_skb net/core/dev.c:4045 [inline] __dev_queue_xmit+0x13d4/0x43e0 net/core/dev.c:4621 dev_queue_xmit include/linux/netdevice.h:3313 [inline] llc_sap_action_send_test_c+0x268/0x320 net/llc/llc_s_ac.c:144 llc_exec_sap_trans_actions net/llc/llc_sap.c:153 [inline] llc_sap_next_state net/llc/llc_sap.c:182 [inline] llc_sap_state_process+0x239/0x510 net/llc/llc_sap.c:209 llc_ui_sendmsg+0xd0d/0x14e0 net/llc/af_llc.c:993 sock_sendmsg_nosec net/socket.c:718 [inline]

In the Linux kernel, the following vulnerability has been resolved: RDMA/mlx5: Fix page_size variable overflow Change all variables storing mlx5_umem_mkc_find_best_pgsz() result to unsigned long to support values larger than 31 and avoid overflow. For example: If we try to register 4GB of memory that is contiguous in physical memory, the driver will optimize the page_size and try to use an mkey with 4GB entity size. The 'unsigned int' page_size variable will overflow to '0' and we'll hit the WARN_ON() in alloc_cacheable_mr(). WARNING: CPU: 2 PID: 1203 at drivers/infiniband/hw/mlx5/mr.c:1124 alloc_cacheable_mr+0x22/0x580 [mlx5_ib] Modules linked in: mlx5_ib mlx5_core bonding ip6_gre ip6_tunnel tunnel6 ip_gre gre rdma_rxe rdma_ucm ib_uverbs ib_ipoib ib_umad rpcrdma ib_iser libiscsi scsi_transport_iscsi rdma_cm iw_cm ib_cm fuse ib_core [last unloaded: mlx5_core] CPU: 2 UID: 70878 PID: 1203 Comm: rdma_resource_l Tainted: G W 6.14.0-rc4-dirty #43 Tainted: [W]=WARN Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:alloc_cacheable_mr+0x22/0x580 [mlx5_ib] Code: 90 90 90 90 90 90 90 90 0f 1f 44 00 00 55 48 89 e5 41 57 41 56 41 55 41 54 41 52 53 48 83 ec 30 f6 46 28 04 4c 8b 77 08 75 21 <0f> 0b 49 c7 c2 ea ff ff ff 48 8d 65 d0 4c 89 d0 5b 41 5a 41 5c 41 RSP: 0018:ffffc900006ffac8 EFLAGS: 00010246 RAX: 0000000004c0d0d0 RBX: ffff888217a22000 RCX: 0000000000100001 RDX: 00007fb7ac480000 RSI: ffff8882037b1240 RDI: ffff8882046f0600 RBP: ffffc900006ffb28 R08: 0000000000000001 R09: 0000000000000000 R10: 00000000000007e0 R11: ffffea0008011d40 R12: ffff8882037b1240 R13: ffff8882046f0600 R14: ffff888217a22000 R15: ffffc900006ffe00 FS: 00007fb7ed013340(0000) GS:ffff88885fd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fb7ed1d8000 CR3: 00000001fd8f6006 CR4: 0000000000772eb0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> ? __warn+0x81/0x130 ? alloc_cacheable_mr+0x22/0x580 [mlx5_ib] ? report_bug+0xfc/0x1e0 ? handle_bug+0x55/0x90 ? exc_invalid_op+0x17/0x70 ? asm_exc_invalid_op+0x1a/0x20 ? alloc_cacheable_mr+0x22/0x580 [mlx5_ib] create_real_mr+0x54/0x150 [mlx5_ib] ib_uverbs_reg_mr+0x17f/0x2a0 [ib_uverbs] ib_uverbs_handler_UVERBS_METHOD_INVOKE_WRITE+0xca/0x140 [ib_uverbs] ib_uverbs_run_method+0x6d0/0x780 [ib_uverbs] ? __pfx_ib_uverbs_handler_UVERBS_METHOD_INVOKE_WRITE+0x10/0x10 [ib_uverbs] ib_uverbs_cmd_verbs+0x19b/0x360 [ib_uverbs] ? walk_system_ram_range+0x79/0xd0 ? ___pte_offset_map+0x1b/0x110 ? __pte_offset_map_lock+0x80/0x100 ib_uverbs_ioctl+0xac/0x110 [ib_uverbs] __x64_sys_ioctl+0x94/0xb0 do_syscall_64+0x50/0x110 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7fb7ecf0737b Code: ff ff ff 85 c0 79 9b 49 c7 c4 ff ff ff ff 5b 5d 4c 89 e0 41 5c c3 66 0f 1f 84 00 00 00 00 00 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 7d 2a 0f 00 f7 d8 64 89 01 48 RSP: 002b:00007ffdbe03ecc8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007ffdbe03edb8 RCX: 00007fb7ecf0737b RDX: 00007ffdbe03eda0 RSI: 00000000c0181b01 RDI: 0000000000000003 RBP: 00007ffdbe03ed80 R08: 00007fb7ecc84010 R09: 00007ffdbe03eed4 R10: 0000000000000009 R11: 0000000000000246 R12: 00007ffdbe03eed4 R13: 000000000000000c R14: 000000000000000c R15: 00007fb7ecc84150 </TASK>

In the Linux kernel, the following vulnerability has been resolved: ppp: Fix KMSAN uninit-value warning with bpf Syzbot caught an "KMSAN: uninit-value" warning [1], which is caused by the ppp driver not initializing a 2-byte header when using socket filter. The following code can generate a PPP filter BPF program: ''' struct bpf_program fp; pcap_t *handle; handle = pcap_open_dead(DLT_PPP_PPPD, 65535); pcap_compile(handle, &fp, "ip and outbound", 0, 0); bpf_dump(&fp, 1); ''' Its output is: ''' (000) ldh [2] (001) jeq #0x21 jt 2 jf 5 (002) ldb [0] (003) jeq #0x1 jt 4 jf 5 (004) ret #65535 (005) ret #0 ''' Wen can find similar code at the following link: https://github.com/ppp-project/ppp/blob/master/pppd/options.c#L1680 The maintainer of this code repository is also the original maintainer of the ppp driver. As you can see the BPF program skips 2 bytes of data and then reads the 'Protocol' field to determine if it's an IP packet. Then it read the first byte of the first 2 bytes to determine the direction. The issue is that only the first byte indicating direction is initialized in current ppp driver code while the second byte is not initialized. For normal BPF programs generated by libpcap, uninitialized data won't be used, so it's not a problem. However, for carefully crafted BPF programs, such as those generated by syzkaller [2], which start reading from offset 0, the uninitialized data will be used and caught by KMSAN. [1] https://syzkaller.appspot.com/bug?extid=853242d9c9917165d791 [2] https://syzkaller.appspot.com/text?tag=ReproC&x=11994913980000

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: core: flush gadget workqueue after device removal device_del() can lead to new work being scheduled in gadget->work workqueue. This is observed, for example, with the dwc3 driver with the following call stack: device_del() gadget_unbind_driver() usb_gadget_disconnect_locked() dwc3_gadget_pullup() dwc3_gadget_soft_disconnect() usb_gadget_set_state() schedule_work(&gadget->work) Move flush_work() after device_del() to ensure the workqueue is cleaned up.

In the Linux kernel, the following vulnerability has been resolved: gpio: rcar: Use raw_spinlock to protect register access Use raw_spinlock in order to fix spurious messages about invalid context when spinlock debugging is enabled. The lock is only used to serialize register access. [ 4.239592] ============================= [ 4.239595] [ BUG: Invalid wait context ] [ 4.239599] 6.13.0-rc7-arm64-renesas-05496-gd088502a519f #35 Not tainted [ 4.239603] ----------------------------- [ 4.239606] kworker/u8:5/76 is trying to lock: [ 4.239609] ffff0000091898a0 (&p->lock){....}-{3:3}, at: gpio_rcar_config_interrupt_input_mode+0x34/0x164 [ 4.239641] other info that might help us debug this: [ 4.239643] context-{5:5} [ 4.239646] 5 locks held by kworker/u8:5/76: [ 4.239651] #0: ffff0000080fb148 ((wq_completion)async){+.+.}-{0:0}, at: process_one_work+0x190/0x62c [ 4.250180] OF: /soc/sound@ec500000/ports/port@0/endpoint: Read of boolean property 'frame-master' with a value. [ 4.254094] #1: ffff80008299bd80 ((work_completion)(&entry->work)){+.+.}-{0:0}, at: process_one_work+0x1b8/0x62c [ 4.254109] #2: ffff00000920c8f8 [ 4.258345] OF: /soc/sound@ec500000/ports/port@1/endpoint: Read of boolean property 'bitclock-master' with a value. [ 4.264803] (&dev->mutex){....}-{4:4}, at: __device_attach_async_helper+0x3c/0xdc [ 4.264820] #3: ffff00000a50ca40 (request_class#2){+.+.}-{4:4}, at: __setup_irq+0xa0/0x690 [ 4.264840] #4: [ 4.268872] OF: /soc/sound@ec500000/ports/port@1/endpoint: Read of boolean property 'frame-master' with a value. [ 4.273275] ffff00000a50c8c8 (lock_class){....}-{2:2}, at: __setup_irq+0xc4/0x690 [ 4.296130] renesas_sdhi_internal_dmac ee100000.mmc: mmc1 base at 0x00000000ee100000, max clock rate 200 MHz [ 4.304082] stack backtrace: [ 4.304086] CPU: 1 UID: 0 PID: 76 Comm: kworker/u8:5 Not tainted 6.13.0-rc7-arm64-renesas-05496-gd088502a519f #35 [ 4.304092] Hardware name: Renesas Salvator-X 2nd version board based on r8a77965 (DT) [ 4.304097] Workqueue: async async_run_entry_fn [ 4.304106] Call trace: [ 4.304110] show_stack+0x14/0x20 (C) [ 4.304122] dump_stack_lvl+0x6c/0x90 [ 4.304131] dump_stack+0x14/0x1c [ 4.304138] __lock_acquire+0xdfc/0x1584 [ 4.426274] lock_acquire+0x1c4/0x33c [ 4.429942] _raw_spin_lock_irqsave+0x5c/0x80 [ 4.434307] gpio_rcar_config_interrupt_input_mode+0x34/0x164 [ 4.440061] gpio_rcar_irq_set_type+0xd4/0xd8 [ 4.444422] __irq_set_trigger+0x5c/0x178 [ 4.448435] __setup_irq+0x2e4/0x690 [ 4.452012] request_threaded_irq+0xc4/0x190 [ 4.456285] devm_request_threaded_irq+0x7c/0xf4 [ 4.459398] ata1: link resume succeeded after 1 retries [ 4.460902] mmc_gpiod_request_cd_irq+0x68/0xe0 [ 4.470660] mmc_start_host+0x50/0xac [ 4.474327] mmc_add_host+0x80/0xe4 [ 4.477817] tmio_mmc_host_probe+0x2b0/0x440 [ 4.482094] renesas_sdhi_probe+0x488/0x6f4 [ 4.486281] renesas_sdhi_internal_dmac_probe+0x60/0x78 [ 4.491509] platform_probe+0x64/0xd8 [ 4.495178] really_probe+0xb8/0x2a8 [ 4.498756] __driver_probe_device+0x74/0x118 [ 4.503116] driver_probe_device+0x3c/0x154 [ 4.507303] __device_attach_driver+0xd4/0x160 [ 4.511750] bus_for_each_drv+0x84/0xe0 [ 4.515588] __device_attach_async_helper+0xb0/0xdc [ 4.520470] async_run_entry_fn+0x30/0xd8 [ 4.524481] process_one_work+0x210/0x62c [ 4.528494] worker_thread+0x1ac/0x340 [ 4.532245] kthread+0x10c/0x110 [ 4.535476] ret_from_fork+0x10/0x20

In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7921: fix kernel panic due to null pointer dereference Address a kernel panic caused by a null pointer dereference in the `mt792x_rx_get_wcid` function. The issue arises because the `deflink` structure is not properly initialized with the `sta` context. This patch ensures that the `deflink` structure is correctly linked to the `sta` context, preventing the null pointer dereference. BUG: kernel NULL pointer dereference, address: 0000000000000400 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 0 UID: 0 PID: 470 Comm: mt76-usb-rx phy Not tainted 6.12.13-gentoo-dist #1 Hardware name: /AMD HUDSON-M1, BIOS 4.6.4 11/15/2011 RIP: 0010:mt792x_rx_get_wcid+0x48/0x140 [mt792x_lib] RSP: 0018:ffffa147c055fd98 EFLAGS: 00010202 RAX: 0000000000000000 RBX: ffff8e9ecb652000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff8e9ecb652000 RBP: 0000000000000685 R08: ffff8e9ec6570000 R09: 0000000000000000 R10: ffff8e9ecd2ca000 R11: ffff8e9f22a217c0 R12: 0000000038010119 R13: 0000000080843801 R14: ffff8e9ec6570000 R15: ffff8e9ecb652000 FS: 0000000000000000(0000) GS:ffff8e9f22a00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000400 CR3: 000000000d2ea000 CR4: 00000000000006f0 Call Trace: <TASK> ? __die_body.cold+0x19/0x27 ? page_fault_oops+0x15a/0x2f0 ? search_module_extables+0x19/0x60 ? search_bpf_extables+0x5f/0x80 ? exc_page_fault+0x7e/0x180 ? asm_exc_page_fault+0x26/0x30 ? mt792x_rx_get_wcid+0x48/0x140 [mt792x_lib] mt7921_queue_rx_skb+0x1c6/0xaa0 [mt7921_common] mt76u_alloc_queues+0x784/0x810 [mt76_usb] ? __pfx___mt76_worker_fn+0x10/0x10 [mt76] __mt76_worker_fn+0x4f/0x80 [mt76] kthread+0xd2/0x100 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x34/0x50 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> ---[ end trace 0000000000000000 ]---

In the Linux kernel, the following vulnerability has been resolved: mm: zswap: fix crypto_free_acomp() deadlock in zswap_cpu_comp_dead() Currently, zswap_cpu_comp_dead() calls crypto_free_acomp() while holding the per-CPU acomp_ctx mutex. crypto_free_acomp() then holds scomp_lock (through crypto_exit_scomp_ops_async()). On the other hand, crypto_alloc_acomp_node() holds the scomp_lock (through crypto_scomp_init_tfm()), and then allocates memory. If the allocation results in reclaim, we may attempt to hold the per-CPU acomp_ctx mutex. The above dependencies can cause an ABBA deadlock. For example in the following scenario: (1) Task A running on CPU #1: crypto_alloc_acomp_node() Holds scomp_lock Enters reclaim Reads per_cpu_ptr(pool->acomp_ctx, 1) (2) Task A is descheduled (3) CPU #1 goes offline zswap_cpu_comp_dead(CPU #1) Holds per_cpu_ptr(pool->acomp_ctx, 1)) Calls crypto_free_acomp() Waits for scomp_lock (4) Task A running on CPU #2: Waits for per_cpu_ptr(pool->acomp_ctx, 1) // Read on CPU #1 DEADLOCK Since there is no requirement to call crypto_free_acomp() with the per-CPU acomp_ctx mutex held in zswap_cpu_comp_dead(), move it after the mutex is unlocked. Also move the acomp_request_free() and kfree() calls for consistency and to avoid any potential sublte locking dependencies in the future. With this, only setting acomp_ctx fields to NULL occurs with the mutex held. This is similar to how zswap_cpu_comp_prepare() only initializes acomp_ctx fields with the mutex held, after performing all allocations before holding the mutex. Opportunistically, move the NULL check on acomp_ctx so that it takes place before the mutex dereference.

In the Linux kernel, the following vulnerability has been resolved: HID: corsair-void: Update power supply values with a unified work handler corsair_void_process_receiver can be called from an interrupt context, locking battery_mutex in it was causing a kernel panic. Fix it by moving the critical section into its own work, sharing this work with battery_add_work and battery_remove_work to remove the need for any locking

In the Linux kernel, the following vulnerability has been resolved: fs/dax: Fix "don't skip locked entries when scanning entries" Commit 6be3e21d25ca ("fs/dax: don't skip locked entries when scanning entries") introduced a new function, wait_entry_unlocked_exclusive(), which waits for the current entry to become unlocked without advancing the XArray iterator state. Waiting for the entry to become unlocked requires dropping the XArray lock. This requires calling xas_pause() prior to dropping the lock which leaves the xas in a suitable state for the next iteration. However this has the side-effect of advancing the xas state to the next index. Normally this isn't an issue because xas_for_each() contains code to detect this state and thus avoid advancing the index a second time on the next loop iteration. However both callers of and wait_entry_unlocked_exclusive() itself subsequently use the xas state to reload the entry. As xas_pause() updated the state to the next index this will cause the current entry which is being waited on to be skipped. This caused the following warning to fire intermittently when running xftest generic/068 on an XFS filesystem with FS DAX enabled: [ 35.067397] ------------[ cut here ]------------ [ 35.068229] WARNING: CPU: 21 PID: 1640 at mm/truncate.c:89 truncate_folio_batch_exceptionals+0xd8/0x1e0 [ 35.069717] Modules linked in: nd_pmem dax_pmem nd_btt nd_e820 libnvdimm [ 35.071006] CPU: 21 UID: 0 PID: 1640 Comm: fstest Not tainted 6.15.0-rc7+ #77 PREEMPT(voluntary) [ 35.072613] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/204 [ 35.074845] RIP: 0010:truncate_folio_batch_exceptionals+0xd8/0x1e0 [ 35.075962] Code: a1 00 00 00 f6 47 0d 20 0f 84 97 00 00 00 4c 63 e8 41 39 c4 7f 0b eb 61 49 83 c5 01 45 39 ec 7e 58 42 f68 [ 35.079522] RSP: 0018:ffffb04e426c7850 EFLAGS: 00010202 [ 35.080359] RAX: 0000000000000000 RBX: ffff9d21e3481908 RCX: ffffb04e426c77f4 [ 35.081477] RDX: ffffb04e426c79e8 RSI: ffffb04e426c79e0 RDI: ffff9d21e34816e8 [ 35.082590] RBP: ffffb04e426c79e0 R08: 0000000000000001 R09: 0000000000000003 [ 35.083733] R10: 0000000000000000 R11: 822b53c0f7a49868 R12: 000000000000001f [ 35.084850] R13: 0000000000000000 R14: ffffb04e426c78e8 R15: fffffffffffffffe [ 35.085953] FS: 00007f9134c87740(0000) GS:ffff9d22abba0000(0000) knlGS:0000000000000000 [ 35.087346] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 35.088244] CR2: 00007f9134c86000 CR3: 000000040afff000 CR4: 00000000000006f0 [ 35.089354] Call Trace: [ 35.089749] <TASK> [ 35.090168] truncate_inode_pages_range+0xfc/0x4d0 [ 35.091078] truncate_pagecache+0x47/0x60 [ 35.091735] xfs_setattr_size+0xc7/0x3e0 [ 35.092648] xfs_vn_setattr+0x1ea/0x270 [ 35.093437] notify_change+0x1f4/0x510 [ 35.094219] ? do_truncate+0x97/0xe0 [ 35.094879] do_truncate+0x97/0xe0 [ 35.095640] path_openat+0xabd/0xca0 [ 35.096278] do_filp_open+0xd7/0x190 [ 35.096860] do_sys_openat2+0x8a/0xe0 [ 35.097459] __x64_sys_openat+0x6d/0xa0 [ 35.098076] do_syscall_64+0xbb/0x1d0 [ 35.098647] entry_SYSCALL_64_after_hwframe+0x77/0x7f [ 35.099444] RIP: 0033:0x7f9134d81fc1 [ 35.100033] Code: 75 57 89 f0 25 00 00 41 00 3d 00 00 41 00 74 49 80 3d 2a 26 0e 00 00 74 6d 89 da 48 89 ee bf 9c ff ff ff5 [ 35.102993] RSP: 002b:00007ffcd41e0d10 EFLAGS: 00000202 ORIG_RAX: 0000000000000101 [ 35.104263] RAX: ffffffffffffffda RBX: 0000000000000242 RCX: 00007f9134d81fc1 [ 35.105452] RDX: 0000000000000242 RSI: 00007ffcd41e1200 RDI: 00000000ffffff9c [ 35.106663] RBP: 00007ffcd41e1200 R08: 0000000000000000 R09: 0000000000000064 [ 35.107923] R10: 00000000000001a4 R11: 0000000000000202 R12: 0000000000000066 [ 35.109112] R13: 0000000000100000 R14: 0000000000100000 R15: 0000000000000400 [ 35.110357] </TASK> [ 35.110769] irq event stamp: 8415587 [ 35.111486] hardirqs last enabled at (8415599): [<ffffffff8d74b562>] __up_console_se ---truncated---