In the Linux kernel, the following vulnerability has been resolved: libceph: Use u32 for non-negative values in ceph_monmap_decode() This patch fixes unnecessary implicit conversions that change signedness of blob_len and num_mon in ceph_monmap_decode(). Currently blob_len and num_mon are (signed) int variables. They are used to hold values that are always non-negative and get assigned in ceph_decode_32_safe(), which is meant to assign u32 values. Both variables are subsequently used as unsigned values, and the value of num_mon is further assigned to monmap->num_mon, which is of type u32. Therefore, both variables should be of type u32. This is especially relevant for num_mon. If the value read from the incoming message is very large, it is interpreted as a negative value, and the check for num_mon > CEPH_MAX_MON does not catch it. This leads to the attempt to allocate a very large chunk of memory for monmap, which will most likely fail. In this case, an unnecessary attempt to allocate memory is performed, and -ENOMEM is returned instead of -EINVAL.
In the Linux kernel, the following vulnerability has been resolved: ntfs: ->d_compare() must not block ... so don't use __getname() there. Switch it (and ntfs_d_hash(), while we are at it) to kmalloc(PATH_MAX, GFP_NOWAIT). Yes, ntfs_d_hash() almost certainly can do with smaller allocations, but let ntfs folks deal with that - keep the allocation size as-is for now. Stop abusing names_cachep in ntfs, period - various uses of that thing in there have nothing to do with pathnames; just use k[mz]alloc() and be done with that. For now let's keep sizes as-in, but AFAICS none of the users actually want PATH_MAX.
In the Linux kernel, the following vulnerability has been resolved: xprtrdma: Decrement re_receiving on the early exit paths In the event that rpcrdma_post_recvs() fails to create a work request (due to memory allocation failure, say) or otherwise exits early, we should decrement ep->re_receiving before returning. Otherwise we will hang in rpcrdma_xprt_drain() as re_receiving will never reach zero and the completion will never be triggered. On a system with high memory pressure, this can appear as the following hung task: INFO: task kworker/u385:17:8393 blocked for more than 122 seconds. Tainted: G S E 6.19.0 #3 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:kworker/u385:17 state:D stack:0 pid:8393 tgid:8393 ppid:2 task_flags:0x4248060 flags:0x00080000 Workqueue: xprtiod xprt_autoclose [sunrpc] Call Trace: <TASK> __schedule+0x48b/0x18b0 ? ib_post_send_mad+0x247/0xae0 [ib_core] schedule+0x27/0xf0 schedule_timeout+0x104/0x110 __wait_for_common+0x98/0x180 ? __pfx_schedule_timeout+0x10/0x10 wait_for_completion+0x24/0x40 rpcrdma_xprt_disconnect+0x444/0x460 [rpcrdma] xprt_rdma_close+0x12/0x40 [rpcrdma] xprt_autoclose+0x5f/0x120 [sunrpc] process_one_work+0x191/0x3e0 worker_thread+0x2e3/0x420 ? __pfx_worker_thread+0x10/0x10 kthread+0x10d/0x230 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x273/0x2b0 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30
In the Linux kernel, the following vulnerability has been resolved: net: correctly handle tunneled traffic on IPV6_CSUM GSO fallback NETIF_F_IPV6_CSUM only advertises support for checksum offload of packets without IPv6 extension headers. Packets with extension headers must fall back onto software checksumming. Since TSO depends on checksum offload, those must revert to GSO. The below commit introduces that fallback. It always checks network header length. For tunneled packets, the inner header length must be checked instead. Extend the check accordingly. A special case is tunneled packets without inner IP protocol. Such as RFC 6951 SCTP in UDP. Those are not standard IPv6 followed by transport header either, so also must revert to the software GSO path.
In the Linux kernel, the following vulnerability has been resolved: scsi: target: file: Use kzalloc_flex for aio_cmd The target_core_file doesn't initialize the aio_cmd->iocb for the ki_write_stream. When a write command fd_execute_rw_aio() is executed, we may get a bogus ki_write_stream value, causing unintended write failure status when checking iocb->ki_write_stream > max_write_streams in the block device. Let's just use kzalloc_flex when allocating the aio_cmd and let ki_write_stream=0 to fix this issue.
In the Linux kernel, the following vulnerability has been resolved: net: xilinx: axienet: Fix BQL accounting for multi-BD TX packets When a TX packet spans multiple buffer descriptors (scatter-gather), axienet_free_tx_chain sums the per-BD actual length from descriptor status into a caller-provided accumulator. That sum is reset on each NAPI poll. If the BDs for a single packet complete across different polls, the earlier bytes are lost and never credited to BQL. This causes BQL to think bytes are permanently in-flight, eventually stalling the TX queue. The SKB pointer is stored only on the last BD of a packet. When that BD completes, use skb->len for the byte count instead of summing per-BD status lengths. This matches netdev_sent_queue(), which debits skb->len, and naturally survives across polls because no partial packet contributes to the accumulator.
In the Linux kernel, the following vulnerability has been resolved: mptcp: fix soft lockup in mptcp_recvmsg() syzbot reported a soft lockup in mptcp_recvmsg() [0]. When receiving data with MSG_PEEK | MSG_WAITALL flags, the skb is not removed from the sk_receive_queue. This causes sk_wait_data() to always find available data and never perform actual waiting, leading to a soft lockup. Fix this by adding a 'last' parameter to track the last peeked skb. This allows sk_wait_data() to make informed waiting decisions and prevent infinite loops when MSG_PEEK is used. [0]: watchdog: BUG: soft lockup - CPU#2 stuck for 156s! [server:1963] Modules linked in: CPU: 2 UID: 0 PID: 1963 Comm: server Not tainted 6.19.0-rc8 #61 PREEMPT(none) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 RIP: 0010:sk_wait_data+0x15/0x190 Code: 80 00 00 00 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 41 56 41 55 41 54 49 89 f4 55 48 89 d5 53 48 89 fb <48> 83 ec 30 65 48 8b 05 17 a4 6b 01 48 89 44 24 28 31 c0 65 48 8b RSP: 0018:ffffc90000603ca0 EFLAGS: 00000246 RAX: 0000000000000000 RBX: ffff888102bf0800 RCX: 0000000000000001 RDX: 0000000000000000 RSI: ffffc90000603d18 RDI: ffff888102bf0800 RBP: 0000000000000000 R08: 0000000000000002 R09: 0000000000000101 R10: 0000000000000000 R11: 0000000000000075 R12: ffffc90000603d18 R13: ffff888102bf0800 R14: ffff888102bf0800 R15: 0000000000000000 FS: 00007f6e38b8c4c0(0000) GS:ffff8881b877e000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055aa7bff1680 CR3: 0000000105cbe000 CR4: 00000000000006f0 Call Trace: <TASK> mptcp_recvmsg+0x547/0x8c0 net/mptcp/protocol.c:2329 inet_recvmsg+0x11f/0x130 net/ipv4/af_inet.c:891 sock_recvmsg+0x94/0xc0 net/socket.c:1100 __sys_recvfrom+0xb2/0x130 net/socket.c:2256 __x64_sys_recvfrom+0x1f/0x30 net/socket.c:2267 do_syscall_64+0x59/0x2d0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x76/0x7e arch/x86/entry/entry_64.S:131 RIP: 0033:0x7f6e386a4a1d Code: 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 8d 05 f1 de 2c 00 41 89 ca 8b 00 85 c0 75 20 45 31 c9 45 31 c0 b8 2d 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 6b f3 c3 66 0f 1f 84 00 00 00 00 00 41 56 41 RSP: 002b:00007ffc3c4bb078 EFLAGS: 00000246 ORIG_RAX: 000000000000002d RAX: ffffffffffffffda RBX: 000000000000861e RCX: 00007f6e386a4a1d RDX: 00000000000003ff RSI: 00007ffc3c4bb150 RDI: 0000000000000004 RBP: 00007ffc3c4bb570 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000103 R11: 0000000000000246 R12: 00005605dbc00be0 R13: 00007ffc3c4bb650 R14: 0000000000000000 R15: 0000000000000000 </TASK>
Loop with unreachable exit condition ('infinite loop') in ASP.NET Core allows an unauthorized attacker to deny service over a network.
In the Linux kernel, the following vulnerability has been resolved: gue: Fix skb memleak with inner IP protocol 0. syzbot reported skb memleak below. [0] The repro generated a GUE packet with its inner protocol 0. gue_udp_recv() returns -guehdr->proto_ctype for "resubmit" in ip_protocol_deliver_rcu(), but this only works with non-zero protocol number. Let's drop such packets. Note that 0 is a valid number (IPv6 Hop-by-Hop Option). I think it is not practical to encap HOPOPT in GUE, so once someone starts to complain, we could pass down a resubmit flag pointer to distinguish two zeros from the upper layer: * no error * resubmit HOPOPT [0] BUG: memory leak unreferenced object 0xffff888109695a00 (size 240): comm "syz.0.17", pid 6088, jiffies 4294943096 hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 40 c2 10 81 88 ff ff 00 00 00 00 00 00 00 00 .@.............. backtrace (crc a84b336f): kmemleak_alloc_recursive include/linux/kmemleak.h:44 [inline] slab_post_alloc_hook mm/slub.c:4958 [inline] slab_alloc_node mm/slub.c:5263 [inline] kmem_cache_alloc_noprof+0x3b4/0x590 mm/slub.c:5270 __build_skb+0x23/0x60 net/core/skbuff.c:474 build_skb+0x20/0x190 net/core/skbuff.c:490 __tun_build_skb drivers/net/tun.c:1541 [inline] tun_build_skb+0x4a1/0xa40 drivers/net/tun.c:1636 tun_get_user+0xc12/0x2030 drivers/net/tun.c:1770 tun_chr_write_iter+0x71/0x120 drivers/net/tun.c:1999 new_sync_write fs/read_write.c:593 [inline] vfs_write+0x45d/0x710 fs/read_write.c:686 ksys_write+0xa7/0x170 fs/read_write.c:738 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xa4/0xf80 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f
In the Linux kernel, the following vulnerability has been resolved: net/rds: Clear reconnect pending bit When canceling the reconnect worker, care must be taken to reset the reconnect-pending bit. If the reconnect worker has not yet been scheduled before it is canceled, the reconnect-pending bit will stay on forever.
IBM Db2 for Linux, UNIX and Windows (includes Db2 Connect Server) is vulnerable to a denial of service as the server may crash when an Out of Memory occurs using the DBMS_OUTPUT module. IBM X-Force ID: 247868.
In nDPI through 3.2, the Oracle protocol dissector has a heap-based buffer over-read in ndpi_search_oracle in lib/protocols/oracle.c.
CAI Content Credentials versions c2pa-web@0.7.1, c2pa-v0.80.1 and earlier are affected by an Integer Overflow or Wraparound vulnerability. An attacker could exploit this vulnerability to crash the application, leading to a denial-of-service condition. Exploitation of this issue does not require user interaction.
In the Linux kernel, the following vulnerability has been resolved: rxrpc: only handle RESPONSE during service challenge Only process RESPONSE packets while the service connection is still in RXRPC_CONN_SERVICE_CHALLENGING. Check that state under state_lock before running response verification and security initialization, then use a local secured flag to decide whether to queue the secured-connection work after the state transition. This keeps duplicate or late RESPONSE packets from re-running the setup path and removes the unlocked post-transition state test.
Allocation of resources without limits in the parsing components in Amazon Athena ODBC driver before 2.1.0.0 might allow a threat actor to cause a denial of service by delivering crafted input that triggers excessive resource consumption during the driver's parsing operations. To remediate this issue, users should upgrade to version 2.1.0.0.
Loop with unreachable exit condition ('infinite loop') in .NET, .NET Framework, Visual Studio allows an unauthorized attacker to deny service over a network.
In the Linux kernel, the following vulnerability has been resolved: smb: server: make use of smbdirect_socket.recv_io.credits.available The logic off managing recv credits by counting posted recv_io and granted credits is racy. That's because the peer might already consumed a credit, but between receiving the incoming recv at the hardware and processing the completion in the 'recv_done' functions we likely have a window where we grant credits, which don't really exist. So we better have a decicated counter for the available credits, which will be incremented when we posted new recv buffers and drained when we grant the credits to the peer. This fixes regression Namjae reported with the 6.18 release.
In the Linux kernel, the following vulnerability has been resolved: smb: smbdirect: introduce smbdirect_socket.recv_io.credits.available The logic off managing recv credits by counting posted recv_io and granted credits is racy. That's because the peer might already consumed a credit, but between receiving the incoming recv at the hardware and processing the completion in the 'recv_done' functions we likely have a window where we grant credits, which don't really exist. So we better have a decicated counter for the available credits, which will be incremented when we posted new recv buffers and drained when we grant the credits to the peer.
In the Linux kernel, the following vulnerability has been resolved: tipc: fix bc_ackers underflow on duplicate GRP_ACK_MSG The GRP_ACK_MSG handler in tipc_group_proto_rcv() currently decrements bc_ackers on every inbound group ACK, even when the same member has already acknowledged the current broadcast round. Because bc_ackers is a u16, a duplicate ACK received after the last legitimate ACK wraps the counter to 65535. Once wrapped, tipc_group_bc_cong() keeps reporting congestion and later group broadcasts on the affected socket stay blocked until the group is recreated. Fix this by ignoring duplicate or stale ACKs before touching bc_acked or bc_ackers. This makes repeated GRP_ACK_MSG handling idempotent and prevents the underflow path.
Stack-based buffer overflow in .NET and Visual Studio allows an unauthorized attacker to deny service over a network.
In the Linux kernel, the following vulnerability has been resolved: nvmet: move async event work off nvmet-wq For target nvmet_ctrl_free() flushes ctrl->async_event_work. If nvmet_ctrl_free() runs on nvmet-wq, the flush re-enters workqueue completion for the same worker:- A. Async event work queued on nvmet-wq (prior to disconnect): nvmet_execute_async_event() queue_work(nvmet_wq, &ctrl->async_event_work) nvmet_add_async_event() queue_work(nvmet_wq, &ctrl->async_event_work) B. Full pre-work chain (RDMA CM path): nvmet_rdma_cm_handler() nvmet_rdma_queue_disconnect() __nvmet_rdma_queue_disconnect() queue_work(nvmet_wq, &queue->release_work) process_one_work() lock((wq_completion)nvmet-wq) <--------- 1st nvmet_rdma_release_queue_work() C. Recursive path (same worker): nvmet_rdma_release_queue_work() nvmet_rdma_free_queue() nvmet_sq_destroy() nvmet_ctrl_put() nvmet_ctrl_free() flush_work(&ctrl->async_event_work) __flush_work() touch_wq_lockdep_map() lock((wq_completion)nvmet-wq) <--------- 2nd Lockdep splat: ============================================ WARNING: possible recursive locking detected 6.19.0-rc3nvme+ #14 Tainted: G N -------------------------------------------- kworker/u192:42/44933 is trying to acquire lock: ffff888118a00948 ((wq_completion)nvmet-wq){+.+.}-{0:0}, at: touch_wq_lockdep_map+0x26/0x90 but task is already holding lock: ffff888118a00948 ((wq_completion)nvmet-wq){+.+.}-{0:0}, at: process_one_work+0x53e/0x660 3 locks held by kworker/u192:42/44933: #0: ffff888118a00948 ((wq_completion)nvmet-wq){+.+.}-{0:0}, at: process_one_work+0x53e/0x660 #1: ffffc9000e6cbe28 ((work_completion)(&queue->release_work)){+.+.}-{0:0}, at: process_one_work+0x1c5/0x660 #2: ffffffff82d4db60 (rcu_read_lock){....}-{1:3}, at: __flush_work+0x62/0x530 Workqueue: nvmet-wq nvmet_rdma_release_queue_work [nvmet_rdma] Call Trace: __flush_work+0x268/0x530 nvmet_ctrl_free+0x140/0x310 [nvmet] nvmet_cq_put+0x74/0x90 [nvmet] nvmet_rdma_free_queue+0x23/0xe0 [nvmet_rdma] nvmet_rdma_release_queue_work+0x19/0x50 [nvmet_rdma] process_one_work+0x206/0x660 worker_thread+0x184/0x320 kthread+0x10c/0x240 ret_from_fork+0x319/0x390 Move async event work to a dedicated nvmet-aen-wq to avoid reentrant flush on nvmet-wq.
In the Linux kernel, the following vulnerability has been resolved: Revert "wireguard: device: enable threaded NAPI" This reverts commit 933466fc50a8e4eb167acbd0d8ec96a078462e9c which is commit db9ae3b6b43c79b1ba87eea849fd65efa05b4b2e upstream. We have had three independent production user reports in combination with Cilium utilizing WireGuard as encryption underneath that k8s Pod E/W traffic to certain peer nodes fully stalled. The situation appears as follows: - Occurs very rarely but at random times under heavy networking load. - Once the issue triggers the decryption side stops working completely for that WireGuard peer, other peers keep working fine. The stall happens also for newly initiated connections towards that particular WireGuard peer. - Only the decryption side is affected, never the encryption side. - Once it triggers, it never recovers and remains in this state, the CPU/mem on that node looks normal, no leak, busy loop or crash. - bpftrace on the affected system shows that wg_prev_queue_enqueue fails, thus the MAX_QUEUED_PACKETS (1024 skbs!) for the peer's rx_queue is reached. - Also, bpftrace shows that wg_packet_rx_poll for that peer is never called again after reaching this state for that peer. For other peers wg_packet_rx_poll does get called normally. - Commit db9ae3b ("wireguard: device: enable threaded NAPI") switched WireGuard to threaded NAPI by default. The default has not been changed for triggering the issue, neither did CPU hotplugging occur (i.e. 5bd8de2 ("wireguard: queueing: always return valid online CPU in wg_cpumask_choose_online()")). - The issue has been observed with stable kernels of v5.15 as well as v6.1. It was reported to us that v5.10 stable is working fine, and no report on v6.6 stable either (somewhat related discussion in [0] though). - In the WireGuard driver the only material difference between v5.10 stable and v5.15 stable is the switch to threaded NAPI by default. [0] https://lore.kernel.org/netdev/CA+wXwBTT74RErDGAnj98PqS=wvdh8eM1pi4q6tTdExtjnokKqA@mail.gmail.com/ Breakdown of the problem: 1) skbs arriving for decryption are enqueued to the peer->rx_queue in wg_packet_consume_data via wg_queue_enqueue_per_device_and_peer. 2) The latter only moves the skb into the MPSC peer queue if it does not surpass MAX_QUEUED_PACKETS (1024) which is kept track in an atomic counter via wg_prev_queue_enqueue. 3) In case enqueueing was successful, the skb is also queued up in the device queue, round-robin picks a next online CPU, and schedules the decryption worker. 4) The wg_packet_decrypt_worker, once scheduled, picks these up from the queue, decrypts the packets and once done calls into wg_queue_enqueue_per_peer_rx. 5) The latter updates the state to PACKET_STATE_CRYPTED on success and calls napi_schedule on the per peer->napi instance. 6) NAPI then polls via wg_packet_rx_poll. wg_prev_queue_peek checks on the peer->rx_queue. It will wg_prev_queue_dequeue if the queue->peeked skb was not cached yet, or just return the latter otherwise. (wg_prev_queue_drop_peeked later clears the cache.) 7) From an ordering perspective, the peer->rx_queue has skbs in order while the device queue with the per-CPU worker threads from a global ordering PoV can finish the decryption and signal the skb PACKET_STATE_CRYPTED out of order. 8) A situation can be observed that the first packet coming in will be stuck waiting for the decryption worker to be scheduled for a longer time when the system is under pressure. 9) While this is the case, the other CPUs in the meantime finish decryption and call into napi_schedule. 10) Now in wg_packet_rx_poll it picks up the first in-order skb from the peer->rx_queue and sees that its state is still PACKET_STATE_UNCRYPTED. The NAPI poll routine then exits e ---truncated---
NVIDIA Triton Inference Server for Windows and Linux contains a vulnerability where an attacker could cause uncontrolled recursion through a specially crafted input. A successful exploit of this vulnerability might lead to denial of service.
Uncontrolled resource consumption in .NET allows an unauthorized attacker to deny service over a network.
Out-of-bounds read in .NET allows an unauthorized attacker to deny service over a network.
TCP firewalls could be circumvented by sending a SYN Packets with other flags (like e.g. RST flag) set, which was not correctly discarded by the Linux TCP stack after firewalling.
NVIDIA Triton Inference Server for Linux contains a vulnerability where an attacker can cause a use-after-free issue. A successful exploit of this vulnerability might lead to denial of service.
NVIDIA Triton Inference Server contains a vulnerability where an attacker could cause a path traversal issue. A successful exploit of this vulnerability might lead to denial of service.
NVIDIA Triton Inference Server contains a vulnerability where an attacker could cause an integer overflow. A successful exploit of this vulnerability might lead to denial of service.
In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Fix race condition during IPSec ESN update In IPSec full offload mode, the device reports an ESN (Extended Sequence Number) wrap event to the driver. The driver validates this event by querying the IPSec ASO and checking that the esn_event_arm field is 0x0, which indicates an event has occurred. After handling the event, the driver must re-arm the context by setting esn_event_arm back to 0x1. A race condition exists in this handling path. After validating the event, the driver calls mlx5_accel_esp_modify_xfrm() to update the kernel's xfrm state. This function temporarily releases and re-acquires the xfrm state lock. So, need to acknowledge the event first by setting esn_event_arm to 0x1. This prevents the driver from reprocessing the same ESN update if the hardware sends events for other reason. Since the next ESN update only occurs after nearly 2^31 packets are received, there's no risk of missing an update, as it will happen long after this handling has finished. Processing the event twice causes the ESN high-order bits (esn_msb) to be incremented incorrectly. The driver then programs the hardware with this invalid ESN state, which leads to anti-replay failures and a complete halt of IPSec traffic. Fix this by re-arming the ESN event immediately after it is validated, before calling mlx5_accel_esp_modify_xfrm(). This ensures that any spurious, duplicate events are correctly ignored, closing the race window.
IBM Spectrum Protect 7.1 and 8.1 could allow an attacker to cause a denial of service due ti improper validation of user-supplied input. IBM X-Force ID: 183613.
In the Linux kernel, the following vulnerability has been resolved: net: can: j1939: j1939_xtp_rx_rts_session_active(): deactivate session upon receiving the second rts Since j1939_session_deactivate_activate_next() in j1939_tp_rxtimer() is called only when the timer is enabled, we need to call j1939_session_deactivate_activate_next() if we cancelled the timer. Otherwise, refcount for j1939_session leaks, which will later appear as | unregister_netdevice: waiting for vcan0 to become free. Usage count = 2. problem.
The sctp_assoc_lookup_asconf_ack function in net/sctp/associola.c in the SCTP implementation in the Linux kernel through 3.17.2 allows remote attackers to cause a denial of service (panic) via duplicate ASCONF chunks that trigger an incorrect uncork within the side-effect interpreter.
In the Linux kernel, the following vulnerability has been resolved: hv_netvsc: use kmap_local_page in netvsc_copy_to_send_buf netvsc_copy_to_send_buf() copies page buffer entries into the VMBus send buffer using phys_to_virt() on the entry PFN. Entries for the RNDIS header and the skb linear data come from kmalloc'd memory and are always in the kernel direct map, but entries for skb fragments reference page cache or user pages, which on 32-bit x86 with CONFIG_HIGHMEM=y can live above the LOWMEM boundary. For such a page phys_to_virt() returns an address outside the direct map and the subsequent memcpy() faults on the transmit softirq path, which is fatal. Map the pages with kmap_local_page() instead, handling two properties of the page buffer entries: - pb[i].pfn is a Hyper-V PFN at HV_HYP_PAGE_SIZE (4K) granularity, not a native PFN. Reconstruct the physical address first and derive the native page from it, so the mapping stays correct where PAGE_SIZE > HV_HYP_PAGE_SIZE (e.g. arm64 with 64K pages). - Since commit 41a6328b2c55 ("hv_netvsc: Preserve contiguous PFN grouping in the page buffer array"), an entry describes a full physically contiguous fragment and pb[i].len can exceed PAGE_SIZE, while kmap_local_page() maps a single page. Copy page by page, splitting at native page boundaries. The copy path only handles packets smaller than the send section size (6144 bytes by default); larger packets take the cp_partial path where only the RNDIS header is copied. So entries here are bounded by the section size and a copy is split at most once on 4K-page systems. On !CONFIG_HIGHMEM configs kmap_local_page() folds to page_address() and no mapping work is added.
In the Linux kernel, the following vulnerability has been resolved: flow_dissector: do not dissect PPPoE PFC frames RFC 2516 Section 7 states that Protocol Field Compression (PFC) is NOT RECOMMENDED for PPPoE. In practice, pppd does not support negotiating PFC for PPPoE sessions, and the flow dissector driver has assumed an uncompressed frame until the blamed commit. During the review process of that commit [1], support for PFC is suggested. However, having a compressed (1-byte) protocol field means the subsequent PPP payload is shifted by one byte, causing 4-byte misalignment for the network header and an unaligned access exception on some architectures. The exception can be reproduced by sending a PPPoE PFC frame to an ethernet interface of a MIPS board, with RPS enabled, even if no PPPoE session is active on that interface: $ 0 : 00000000 80c40000 00000000 85144817 $ 4 : 00000008 00000100 80a75758 81dc9bb8 $ 8 : 00000010 8087ae2c 0000003d 00000000 $12 : 000000e0 00000039 00000000 00000000 $16 : 85043240 80a75758 81dc9bb8 00006488 $20 : 0000002f 00000007 85144810 80a70000 $24 : 81d1bda0 00000000 $28 : 81dc8000 81dc9aa8 00000000 805ead08 Hi : 00009d51 Lo : 2163358a epc : 805e91f0 __skb_flow_dissect+0x1b0/0x1b50 ra : 805ead08 __skb_get_hash_net+0x74/0x12c Status: 11000403 KERNEL EXL IE Cause : 40800010 (ExcCode 04) BadVA : 85144817 PrId : 0001992f (MIPS 1004Kc) Call Trace: [<805e91f0>] __skb_flow_dissect+0x1b0/0x1b50 [<805ead08>] __skb_get_hash_net+0x74/0x12c [<805ef330>] get_rps_cpu+0x1b8/0x3fc [<805fca70>] netif_receive_skb_list_internal+0x324/0x364 [<805fd120>] napi_complete_done+0x68/0x2a4 [<8058de5c>] mtk_napi_rx+0x228/0xfec [<805fd398>] __napi_poll+0x3c/0x1c4 [<805fd754>] napi_threaded_poll_loop+0x234/0x29c [<805fd848>] napi_threaded_poll+0x8c/0xb0 [<80053544>] kthread+0x104/0x12c [<80002bd8>] ret_from_kernel_thread+0x14/0x1c Code: 02d51821 1060045b 00000000 <8c640000> 3084000f 2c820005 144001a2 00042080 8e220000 To reduce the attack surface and maintain performance, do not process PPPoE PFC frames. [1] https://lore.kernel.org/r/20220630231016.GA392@debian.home
In the Linux kernel, the following vulnerability has been resolved: net/x25: Fix overflow when accumulating packets Add a check to ensure that `x25_sock.fraglen` does not overflow. The `fraglen` also needs to be resetted when purging `fragment_queue` in `x25_clear_queues()`.
The socket implementation in net/core/sock.c in the Linux kernel before 2.6.34 does not properly manage a backlog of received packets, which allows remote attackers to cause a denial of service (memory consumption) by sending a large amount of network traffic, as demonstrated by netperf UDP tests.
Insufficient Verification of Data Authenticity, Improper Handling of Exceptional Conditions vulnerability in rustdesk-client RustDesk Client rustdesk-client on Windows, MacOS, Linux, iOS, Android (Heartbeat sync loop, strategy processing modules) allows Protocol Manipulation. This vulnerability is associated with program files src/hbbs_http/sync.Rs and program routines stop-service handler in heartbeat loop. This issue affects RustDesk Client: through 1.4.8.
In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Fix "scheduling while atomic" in IPsec MAC address query Fix a "scheduling while atomic" bug in mlx5e_ipsec_init_macs() by replacing mlx5_query_mac_address() with ether_addr_copy() to get the local MAC address directly from netdev->dev_addr. The issue occurs because mlx5_query_mac_address() queries the hardware which involves mlx5_cmd_exec() that can sleep, but it is called from the mlx5e_ipsec_handle_event workqueue which runs in atomic context. The MAC address is already available in netdev->dev_addr, so no need to query hardware. This avoids the sleeping call and resolves the bug. Call trace: BUG: scheduling while atomic: kworker/u112:2/69344/0x00000200 __schedule+0x7ab/0xa20 schedule+0x1c/0xb0 schedule_timeout+0x6e/0xf0 __wait_for_common+0x91/0x1b0 cmd_exec+0xa85/0xff0 [mlx5_core] mlx5_cmd_exec+0x1f/0x50 [mlx5_core] mlx5_query_nic_vport_mac_address+0x7b/0xd0 [mlx5_core] mlx5_query_mac_address+0x19/0x30 [mlx5_core] mlx5e_ipsec_init_macs+0xc1/0x720 [mlx5_core] mlx5e_ipsec_build_accel_xfrm_attrs+0x422/0x670 [mlx5_core] mlx5e_ipsec_handle_event+0x2b9/0x460 [mlx5_core] process_one_work+0x178/0x2e0 worker_thread+0x2ea/0x430
In the Linux kernel, the following vulnerability has been resolved: net/smc: check return value of sock_recvmsg when draining clc data When receiving clc msg, the field length in smc_clc_msg_hdr indicates the length of msg should be received from network and the value should not be fully trusted as it is from the network. Once the value of length exceeds the value of buflen in function smc_clc_wait_msg it may run into deadloop when trying to drain the remaining data exceeding buflen. This patch checks the return value of sock_recvmsg when draining data in case of deadloop in draining.
In the Linux kernel, the following vulnerability has been resolved: rxrpc: fix oversized RESPONSE authenticator length check rxgk_verify_response() decodes auth_len from the packet and is supposed to verify that it fits in the remaining bytes. The existing check is inverted, so oversized RESPONSE authenticators are accepted and passed to rxgk_decrypt_skb(), which can later reach skb_to_sgvec() with an impossible length and hit BUG_ON(len). Decoded from the original latest-net reproduction logs with scripts/decode_stacktrace.sh: RIP: __skb_to_sgvec() [net/core/skbuff.c:5285 (discriminator 1)] Call Trace: skb_to_sgvec() [net/core/skbuff.c:5305] rxgk_decrypt_skb() [net/rxrpc/rxgk_common.h:81] rxgk_verify_response() [net/rxrpc/rxgk.c:1268] rxrpc_process_connection() [net/rxrpc/conn_event.c:266 net/rxrpc/conn_event.c:364 net/rxrpc/conn_event.c:386] process_one_work() [kernel/workqueue.c:3281] worker_thread() [kernel/workqueue.c:3353 kernel/workqueue.c:3440] kthread() [kernel/kthread.c:436] ret_from_fork() [arch/x86/kernel/process.c:164] Reject authenticator lengths that exceed the remaining packet payload.
In the Linux kernel, the following vulnerability has been resolved: net: ks8851: Reinstate disabling of BHs around IRQ handler If the driver executes ks8851_irq() AND a TX packet has been sent, then the driver enables TX queue via netif_wake_queue() which schedules TX softirq to queue packets for this device. If CONFIG_PREEMPT_RT=y is set AND a packet has also been received by the MAC, then ks8851_rx_pkts() calls netdev_alloc_skb_ip_align() to allocate SKBs for the received packets. If netdev_alloc_skb_ip_align() is called with BH enabled, then local_bh_enable() at the end of netdev_alloc_skb_ip_align() will trigger the pending softirq processing, which may ultimately call the .xmit callback ks8851_start_xmit_par(). The ks8851_start_xmit_par() will try to lock struct ks8851_net_par .lock spinlock, which is already locked by ks8851_irq() from which ks8851_start_xmit_par() was called. This leads to a deadlock, which is reported by the kernel, including a trace listed below. If CONFIG_PREEMPT_RT is not set, then since commit 0913ec336a6c0 ("net: ks8851: Fix deadlock with the SPI chip variant") the deadlock can also be triggered without received packet in the RX FIFO. The pending softirqs will be processed on return from spin_unlock_bh(&ks->statelock) in ks8851_irq(), which triggers the deadlock as well. Fix the problem by disabling BH around critical sections, including the IRQ handler, thus preventing the net_tx_action() softirq from triggering during these critical sections. The net_tx_action() softirq is triggered once BH are re-enabled and at the end of the IRQ handler, once all the other IRQ handler actions have been completed. __schedule from schedule_rtlock+0x1c/0x34 schedule_rtlock from rtlock_slowlock_locked+0x548/0x904 rtlock_slowlock_locked from rt_spin_lock+0x60/0x9c rt_spin_lock from ks8851_start_xmit_par+0x74/0x1a8 ks8851_start_xmit_par from netdev_start_xmit+0x20/0x44 netdev_start_xmit from dev_hard_start_xmit+0xd0/0x188 dev_hard_start_xmit from sch_direct_xmit+0xb8/0x25c sch_direct_xmit from __qdisc_run+0x1f8/0x4ec __qdisc_run from qdisc_run+0x1c/0x28 qdisc_run from net_tx_action+0x1f0/0x268 net_tx_action from handle_softirqs+0x1a4/0x270 handle_softirqs from __local_bh_enable_ip+0xcc/0xe0 __local_bh_enable_ip from __alloc_skb+0xd8/0x128 __alloc_skb from __netdev_alloc_skb+0x3c/0x19c __netdev_alloc_skb from ks8851_irq+0x388/0x4d4 ks8851_irq from irq_thread_fn+0x24/0x64 irq_thread_fn from irq_thread+0x178/0x28c irq_thread from kthread+0x12c/0x138 kthread from ret_from_fork+0x14/0x28
IBM Db2 for Linux, UNIX and Windows 12.1.0 and 12.1.1 is vulnerable to a denial of service as the server may crash under certain conditions with a specially crafted query.
A memory leak in the spi_gpio_probe() function in drivers/spi/spi-gpio.c in the Linux kernel through 5.3.11 allows attackers to cause a denial of service (memory consumption) by triggering devm_add_action_or_reset() failures, aka CID-d3b0ffa1d75d. NOTE: third parties dispute the relevance of this because the system must have already been out of memory before the probe began
Some Dahua software products have a vulnerability of unauthenticated restart of remote DSS Server. After bypassing the firewall access control policy, by sending a specific crafted packet to the vulnerable interface, an attacker could unauthenticated restart of remote DSS Server.
Denial of service due to unauthenticated API endpoint. The following products are affected: Acronis Agent (Windows, macOS, Linux) before build 30161.
In the Linux kernel, the following vulnerability has been resolved: tcp: fix mptcp DSS corruption due to large pmtu xmit Syzkaller was able to trigger a DSS corruption: TCP: request_sock_subflow_v4: Possible SYN flooding on port [::]:20002. Sending cookies. ------------[ cut here ]------------ WARNING: CPU: 0 PID: 5227 at net/mptcp/protocol.c:695 __mptcp_move_skbs_from_subflow+0x20a9/0x21f0 net/mptcp/protocol.c:695 Modules linked in: CPU: 0 UID: 0 PID: 5227 Comm: syz-executor350 Not tainted 6.11.0-syzkaller-08829-gaf9c191ac2a0 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/06/2024 RIP: 0010:__mptcp_move_skbs_from_subflow+0x20a9/0x21f0 net/mptcp/protocol.c:695 Code: 0f b6 dc 31 ff 89 de e8 b5 dd ea f5 89 d8 48 81 c4 50 01 00 00 5b 41 5c 41 5d 41 5e 41 5f 5d c3 cc cc cc cc e8 98 da ea f5 90 <0f> 0b 90 e9 47 ff ff ff e8 8a da ea f5 90 0f 0b 90 e9 99 e0 ff ff RSP: 0018:ffffc90000006db8 EFLAGS: 00010246 RAX: ffffffff8ba9df18 RBX: 00000000000055f0 RCX: ffff888030023c00 RDX: 0000000000000100 RSI: 00000000000081e5 RDI: 00000000000055f0 RBP: 1ffff110062bf1ae R08: ffffffff8ba9cf12 R09: 1ffff110062bf1b8 R10: dffffc0000000000 R11: ffffed10062bf1b9 R12: 0000000000000000 R13: dffffc0000000000 R14: 00000000700cec61 R15: 00000000000081e5 FS: 000055556679c380(0000) GS:ffff8880b8600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020287000 CR3: 0000000077892000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <IRQ> move_skbs_to_msk net/mptcp/protocol.c:811 [inline] mptcp_data_ready+0x29c/0xa90 net/mptcp/protocol.c:854 subflow_data_ready+0x34a/0x920 net/mptcp/subflow.c:1490 tcp_data_queue+0x20fd/0x76c0 net/ipv4/tcp_input.c:5283 tcp_rcv_established+0xfba/0x2020 net/ipv4/tcp_input.c:6237 tcp_v4_do_rcv+0x96d/0xc70 net/ipv4/tcp_ipv4.c:1915 tcp_v4_rcv+0x2dc0/0x37f0 net/ipv4/tcp_ipv4.c:2350 ip_protocol_deliver_rcu+0x22e/0x440 net/ipv4/ip_input.c:205 ip_local_deliver_finish+0x341/0x5f0 net/ipv4/ip_input.c:233 NF_HOOK+0x3a4/0x450 include/linux/netfilter.h:314 NF_HOOK+0x3a4/0x450 include/linux/netfilter.h:314 __netif_receive_skb_one_core net/core/dev.c:5662 [inline] __netif_receive_skb+0x2bf/0x650 net/core/dev.c:5775 process_backlog+0x662/0x15b0 net/core/dev.c:6107 __napi_poll+0xcb/0x490 net/core/dev.c:6771 napi_poll net/core/dev.c:6840 [inline] net_rx_action+0x89b/0x1240 net/core/dev.c:6962 handle_softirqs+0x2c5/0x980 kernel/softirq.c:554 do_softirq+0x11b/0x1e0 kernel/softirq.c:455 </IRQ> <TASK> __local_bh_enable_ip+0x1bb/0x200 kernel/softirq.c:382 local_bh_enable include/linux/bottom_half.h:33 [inline] rcu_read_unlock_bh include/linux/rcupdate.h:919 [inline] __dev_queue_xmit+0x1764/0x3e80 net/core/dev.c:4451 dev_queue_xmit include/linux/netdevice.h:3094 [inline] neigh_hh_output include/net/neighbour.h:526 [inline] neigh_output include/net/neighbour.h:540 [inline] ip_finish_output2+0xd41/0x1390 net/ipv4/ip_output.c:236 ip_local_out net/ipv4/ip_output.c:130 [inline] __ip_queue_xmit+0x118c/0x1b80 net/ipv4/ip_output.c:536 __tcp_transmit_skb+0x2544/0x3b30 net/ipv4/tcp_output.c:1466 tcp_transmit_skb net/ipv4/tcp_output.c:1484 [inline] tcp_mtu_probe net/ipv4/tcp_output.c:2547 [inline] tcp_write_xmit+0x641d/0x6bf0 net/ipv4/tcp_output.c:2752 __tcp_push_pending_frames+0x9b/0x360 net/ipv4/tcp_output.c:3015 tcp_push_pending_frames include/net/tcp.h:2107 [inline] tcp_data_snd_check net/ipv4/tcp_input.c:5714 [inline] tcp_rcv_established+0x1026/0x2020 net/ipv4/tcp_input.c:6239 tcp_v4_do_rcv+0x96d/0xc70 net/ipv4/tcp_ipv4.c:1915 sk_backlog_rcv include/net/sock.h:1113 [inline] __release_sock+0x214/0x350 net/core/sock.c:3072 release_sock+0x61/0x1f0 net/core/sock.c:3626 mptcp_push_ ---truncated---
A use-after-free vulnerability was found in __nfs42_ssc_open() in fs/nfs/nfs4file.c in the Linux kernel. This flaw allows an attacker to conduct a remote denial
The Linux kernel NFSD implementation prior to versions 5.19.17 and 6.0.2 are vulnerable to buffer overflow. NFSD tracks the number of pages held by each NFSD thread by combining the receive and send buffers of a remote procedure call (RPC) into a single array of pages. A client can force the send buffer to shrink by sending an RPC message over TCP with garbage data added at the end of the message. The RPC message with garbage data is still correctly formed according to the specification and is passed forward to handlers. Vulnerable code in NFSD is not expecting the oversized request and writes beyond the allocated buffer space. CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
Denial of service due to insufficient input validation in authentication logging. The following products are affected: Acronis Cyber Protect 17 (Linux, Windows) before build 41186.