In the Linux kernel, the following vulnerability has been resolved: net: bcmgenet: fix leaking free_bds While reclaiming the tx queue we fast forward the write pointer to drop any data in flight. These dropped frames are not added back to the pool of free bds. We also need to tell the netdev that we are dropping said data.

In the Linux kernel, the following vulnerability has been resolved: net, bpf: fix null-ptr-deref in xdp_master_redirect() for down master syzkaller reported a kernel panic in bond_rr_gen_slave_id() reached via xdp_master_redirect(). Full decoded trace: https://syzkaller.appspot.com/bug?extid=80e046b8da2820b6ba73 bond_rr_gen_slave_id() dereferences bond->rr_tx_counter, a per-CPU counter that bonding only allocates in bond_open() when the mode is round-robin. If the bond device was never brought up, rr_tx_counter stays NULL. The XDP redirect path can still reach that code on a bond that was never opened: bpf_master_redirect_enabled_key is a global static key, so as soon as any bond device has native XDP attached, the XDP_TX -> xdp_master_redirect() interception is enabled for every slave system-wide. The path xdp_master_redirect() -> bond_xdp_get_xmit_slave() -> bond_xdp_xmit_roundrobin_slave_get() -> bond_rr_gen_slave_id() then runs against a bond that has no rr_tx_counter and crashes. Fix this in the generic xdp_master_redirect() by refusing to call into the master's ->ndo_xdp_get_xmit_slave() when the master device is not up. IFF_UP is only set after ->ndo_open() has successfully returned, so this reliably excludes masters whose XDP state has not been fully initialized. Drop the frame with XDP_ABORTED so the exception is visible via trace_xdp_exception() rather than silently falling through. This is not specific to bonding: any current or future master that defers XDP state allocation to ->ndo_open() is protected.

In the Linux kernel, the following vulnerability has been resolved: timers/migration: Fix livelock in tmigr_handle_remote_up() tmigr_handle_remote_cpu() skips timer_expire_remote() when cpu == smp_processor_id(), assuming the local softirq path already handled this CPU's timers. This assumption is wrong because jiffies can advance after the handling of the CPU's global timers in run_timer_base(BASE_GLOBAL) and before tmigr_handle_remote() evaluates the expiry times. As a consequence a timer which expires after the CPU local timer wheel advanced and becomes expired in the remote handling is ignored and the callback is never invoked and removed from the timer wheel. What's worse is that fetch_next_timer_interrupt_remote() keeps reporting it as expired, and the event is re-queued with expires == now on each iteration. The goto-again loop spins indefinitely. Fix this by calling timer_expire_remote() unconditionally. That's minimal overhead for the common case as __run_timer_base() returns immediately if there is nothing to expire in the local wheel. [ tglx: Amend change log and add a comment ]

In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: xsk: Fix DMA and xdp_frame leak on XDP_TX xmit failure In the XSK branch of mlx5e_xmit_xdp_buff(), when sq->xmit_xdp_frame() returns false (e.g. XDPSQ is full), the function returns without unmapping the DMA address or freeing the xdp_frame allocated by xdp_convert_zc_to_xdp_frame(). The xdpi_fifo push only happens on success, so the completion path cannot recover these entries. With CONFIG_DMA_API_DEBUG=y, the leak surfaces on driver unbind: DMA-API: pci 0000:08:00.0: device driver has pending DMA allocations while released from device [count=1116] One of leaked entries details: [device address=0x000000010ffd7028] [size=1534 bytes] [mapped with DMA_TO_DEVICE] [mapped as phy] WARNING: kernel/dma/debug.c:881 at dma_debug_device_change+0x127/0x180 ... DMA-API: Mapped at: debug_dma_map_phys+0x4b/0xd0 dma_map_phys+0xfd/0x2d0 mlx5e_xdp_handle+0x5ae/0xac0 [mlx5_core] mlx5e_xsk_skb_from_cqe_mpwrq_linear+0xc4/0x170 [mlx5_core] mlx5e_handle_rx_cqe_mpwrq+0xc1/0x290 [mlx5_core] Add the missing unmap + xdp_return_frame, matching the cleanup already done in mlx5e_xdp_xmit(). has_frags is rejected earlier in this branch, so no per-frag unmap is needed.

In the Linux kernel, the following vulnerability has been resolved: nfsd: fix posix_acl leak on SETACL decode failure nfsaclsvc_decode_setaclargs() and nfs3svc_decode_setaclargs() each call nfs_stream_decode_acl() twice, first for NFS_ACL and then for NFS_DFACL. Each successful call transfers ownership of a freshly allocated posix_acl into argp->acl_access or argp->acl_default. If the first call succeeds but the second fails, the decoder returns false and argp->acl_access is left dangling. ACLPROC2_SETACL.pc_release was wired to nfssvc_release_attrstat and ACLPROC3_SETACL.pc_release was wired to nfs3svc_release_fhandle. Both only call fh_put() and have no knowledge of the ACL fields on argp. The posix_acl_release() pairs sat at the out: labels inside nfsacld_proc_setacl() and nfsd3_proc_setacl(), but svc_process() skips pc_func when pc_decode returns false, so that cleanup is unreachable on decode failure: svc_process_common() pc_decode() /* decode_setaclargs: false */ /* pc_func skipped */ pc_release() /* fh_put only -- ACLs leaked */ The orphaned posix_acl is leaked for the lifetime of the server. Fix by adding nfsaclsvc_release_setacl() and nfs3svc_release_setacl(), which release both argp->acl_access and argp->acl_default in addition to fh_put(), and wiring them as pc_release for their respective SETACL procedures. pc_release runs on every path svc_process() takes after decode, including decode failure, so the posix_acl_release() pairs are removed from the proc functions' out: labels to keep ownership in one place. This matches the existing release_getacl() pattern used by the sibling GETACL procedures.

In the Linux kernel, the following vulnerability has been resolved: fs/fcntl: fix SOFTIRQ-unsafe lock order in fasync signaling A SOFTIRQ-safe to SOFTIRQ-unsafe lock order deadlock can occur in send_sigio() and send_sigurg() when a process group receives a signal. When FASYNC is configured for a process group (PIDTYPE_PGID), both functions use read_lock(&tasklist_lock) to traverse the task list. However, they are frequently called from softirq context: - send_sigio() via input_inject_event -> kill_fasync - send_sigurg() via tcp_check_urg -> sk_send_sigurg (NET_RX_SOFTIRQ) The deadlock is caused by the rwlock writer fairness mechanism: 1. CPU 0 (process context) holds read_lock(&tasklist_lock) in do_wait(). 2. CPU 1 (process context) attempts write_lock(&tasklist_lock) in fork() or exit() and spins, which blocks all new readers. 3. CPU 0 is interrupted by a softirq (e.g., TCP URG packet reception). 4. The softirq calls send_sigurg() and attempts to acquire read_lock(&tasklist_lock), deadlocking because CPU 1 is waiting. Since PID hashing and do_each_pid_task() traversals are already RCU-protected, the read_lock on tasklist_lock is no longer strictly required for safe traversal. Fix this by replacing tasklist_lock with rcu_read_lock(), aligning the process group signaling path with the single-PID path. This also mitigates a potential remote denial of service vector via TCP URG packets. Lockdep splat: ===================================================== WARNING: SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected [...] Chain exists of: &dev->event_lock --> &f_owner->lock --> tasklist_lock Possible interrupt unsafe locking scenario: CPU0 CPU1 ---- ---- lock(tasklist_lock); local_irq_disable(); lock(&dev->event_lock); lock(&f_owner->lock); <Interrupt> lock(&dev->event_lock); *** DEADLOCK ***

Leptonica before 1.80.0 allows a heap-based buffer over-read in findNextBorderPixel in ccbord.c.

Leptonica before 1.80.0 allows a heap-based buffer over-read in pixFewColorsOctcubeQuantMixed in colorquant1.c.

In the Linux kernel, the following vulnerability has been resolved: net/smc: check return value of sock_recvmsg when draining clc data When receiving clc msg, the field length in smc_clc_msg_hdr indicates the length of msg should be received from network and the value should not be fully trusted as it is from the network. Once the value of length exceeds the value of buflen in function smc_clc_wait_msg it may run into deadloop when trying to drain the remaining data exceeding buflen. This patch checks the return value of sock_recvmsg when draining data in case of deadloop in draining.

Certain WithSecure products allow Denial of Service via a fuzzed PE32 file. This affects WithSecure Client Security 15, WithSecure Server Security 15, WithSecure Email and Server Security 15, WithSecure Elements Endpoint Protection 17 and later, WithSecure Client Security for Mac 15, WithSecure Elements Endpoint Protection for Mac 17 and later, Linux Security 64 12.0 , Linux Protection 12.0, and WithSecure Atlant (formerly F-Secure Atlant) 1.0.35-1.

Leptonica before 1.80.0 allows a heap-based buffer over-read in rasteropGeneralLow, related to adaptmap_reg.c and adaptmap.c.

NVIDIA Triton Inference Server for Linux contains a vulnerability where an attacker can cause improper handling of highly compressed data. A successful exploit of this vulnerability might lead to denial of service.

Integer underflow in the firewall logging rules for iptables in Linux before 2.6.8 allows remote attackers to cause a denial of service (application crash) via a malformed IP packet.

This CVE ID has been rejected or withdrawn by its CVE Numbering Authority.

Certain WithSecure products allow a remote crash of a scanning engine via processing of an import struct in a PE file. This affects WithSecure Client Security 15, WithSecure Server Security 15, WithSecure Email and Server Security 15, WithSecure Elements Endpoint Protection 17 and later, WithSecure Client Security for Mac 15, WithSecure Elements Endpoint Protection for Mac 17 and later, Linux Security 64 12.0 , Linux Protection 12.0, and WithSecure Atlant (formerly F-Secure Atlant) 1.0.35-1.

Certain WithSecure products allow a remote crash of a scanning engine via decompression of crafted data files. This affects WithSecure Client Security 15, WithSecure Server Security 15, WithSecure Email and Server Security 15, WithSecure Elements Endpoint Protection 17 and later, WithSecure Client Security for Mac 15, WithSecure Elements Endpoint Protection for Mac 17 and later, Linux Security 64 12.0 , Linux Protection 12.0, and WithSecure Atlant (formerly F-Secure Atlant) 1.0.35-1.

In the Linux kernel, the following vulnerability has been resolved: rxrpc: fix oversized RESPONSE authenticator length check rxgk_verify_response() decodes auth_len from the packet and is supposed to verify that it fits in the remaining bytes. The existing check is inverted, so oversized RESPONSE authenticators are accepted and passed to rxgk_decrypt_skb(), which can later reach skb_to_sgvec() with an impossible length and hit BUG_ON(len). Decoded from the original latest-net reproduction logs with scripts/decode_stacktrace.sh: RIP: __skb_to_sgvec() [net/core/skbuff.c:5285 (discriminator 1)] Call Trace: skb_to_sgvec() [net/core/skbuff.c:5305] rxgk_decrypt_skb() [net/rxrpc/rxgk_common.h:81] rxgk_verify_response() [net/rxrpc/rxgk.c:1268] rxrpc_process_connection() [net/rxrpc/conn_event.c:266 net/rxrpc/conn_event.c:364 net/rxrpc/conn_event.c:386] process_one_work() [kernel/workqueue.c:3281] worker_thread() [kernel/workqueue.c:3353 kernel/workqueue.c:3440] kthread() [kernel/kthread.c:436] ret_from_fork() [arch/x86/kernel/process.c:164] Reject authenticator lengths that exceed the remaining packet payload.

In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix use of wrong skb when comparing queued RESP challenge serial In rxrpc_post_response(), the code should be comparing the challenge serial number from the cached response before deciding to switch to a newer response, but looks at the newer packet private data instead, rendering the comparison always false. Fix this by switching to look at the older packet. Fix further[1] to substitute the new packet in place of the old one if newer and also to release whichever we don't use.

In the Linux kernel, the following vulnerability has been resolved: net/rds: Fix circular locking dependency in rds_tcp_tune syzbot reported a circular locking dependency in rds_tcp_tune() where sk_net_refcnt_upgrade() is called while holding the socket lock: ====================================================== WARNING: possible circular locking dependency detected ====================================================== kworker/u10:8/15040 is trying to acquire lock: ffffffff8e9aaf80 (fs_reclaim){+.+.}-{0:0}, at: __kmalloc_cache_noprof+0x4b/0x6f0 but task is already holding lock: ffff88805a3c1ce0 (k-sk_lock-AF_INET6){+.+.}-{0:0}, at: rds_tcp_tune+0xd7/0x930 The issue occurs because sk_net_refcnt_upgrade() performs memory allocation (via get_net_track() -> ref_tracker_alloc()) while the socket lock is held, creating a circular dependency with fs_reclaim. Fix this by moving sk_net_refcnt_upgrade() outside the socket lock critical section. This is safe because the fields modified by the sk_net_refcnt_upgrade() call (sk_net_refcnt, ns_tracker) are not accessed by any concurrent code path at this point. v2: - Corrected fixes tag - check patch line wrap nits - ai commentary nits

Stack-based buffer overflow in .NET and Visual Studio allows an unauthorized attacker to deny service over a network.

In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Fix race condition during IPSec ESN update In IPSec full offload mode, the device reports an ESN (Extended Sequence Number) wrap event to the driver. The driver validates this event by querying the IPSec ASO and checking that the esn_event_arm field is 0x0, which indicates an event has occurred. After handling the event, the driver must re-arm the context by setting esn_event_arm back to 0x1. A race condition exists in this handling path. After validating the event, the driver calls mlx5_accel_esp_modify_xfrm() to update the kernel's xfrm state. This function temporarily releases and re-acquires the xfrm state lock. So, need to acknowledge the event first by setting esn_event_arm to 0x1. This prevents the driver from reprocessing the same ESN update if the hardware sends events for other reason. Since the next ESN update only occurs after nearly 2^31 packets are received, there's no risk of missing an update, as it will happen long after this handling has finished. Processing the event twice causes the ESN high-order bits (esn_msb) to be incremented incorrectly. The driver then programs the hardware with this invalid ESN state, which leads to anti-replay failures and a complete halt of IPSec traffic. Fix this by re-arming the ESN event immediately after it is validated, before calling mlx5_accel_esp_modify_xfrm(). This ensures that any spurious, duplicate events are correctly ignored, closing the race window.

In the Linux kernel, the following vulnerability has been resolved: bonding: prevent potential infinite loop in bond_header_parse() bond_header_parse() can loop if a stack of two bonding devices is setup, because skb->dev always points to the hierarchy top. Add new "const struct net_device *dev" parameter to (struct header_ops)->parse() method to make sure the recursion is bounded, and that the final leaf parse method is called.

In the Linux kernel, the following vulnerability has been resolved: net: ti: icssg-prueth: Fix memory leak in XDP_DROP for non-zero-copy mode Page recycling was removed from the XDP_DROP path in emac_run_xdp() to avoid conflicts with AF_XDP zero-copy mode, which uses xsk_buff_free() instead. However, this causes a memory leak when running XDP programs that drop packets in non-zero-copy mode (standard page pool mode). The pages are never returned to the page pool, leading to OOM conditions. Fix this by handling cleanup in the caller, emac_rx_packet(). When emac_run_xdp() returns ICSSG_XDP_CONSUMED for XDP_DROP, the caller now recycles the page back to the page pool. The zero-copy path, emac_rx_packet_zc() already handles cleanup correctly with xsk_buff_free().

Allocation of resources without limits in the parsing components in Amazon Athena ODBC driver before 2.1.0.0 might allow a threat actor to cause a denial of service by delivering crafted input that triggers excessive resource consumption during the driver's parsing operations. To remediate this issue, users should upgrade to version 2.1.0.0.

In the Linux kernel, the following vulnerability has been resolved: tipc: fix bc_ackers underflow on duplicate GRP_ACK_MSG The GRP_ACK_MSG handler in tipc_group_proto_rcv() currently decrements bc_ackers on every inbound group ACK, even when the same member has already acknowledged the current broadcast round. Because bc_ackers is a u16, a duplicate ACK received after the last legitimate ACK wraps the counter to 65535. Once wrapped, tipc_group_bc_cong() keeps reporting congestion and later group broadcasts on the affected socket stay blocked until the group is recreated. Fix this by ignoring duplicate or stale ACKs before touching bc_acked or bc_ackers. This makes repeated GRP_ACK_MSG handling idempotent and prevents the underflow path.

CAI Content Credentials is affected by an Improper Input Validation vulnerability that could result in an application denial-of-service. An attacker could exploit this vulnerability to crash the application, leading to a denial-of-service condition. Exploitation of this issue does not require user interaction.

NVIDIA Triton Inference Server for Linux contains a vulnerability where an attacker can cause a use-after-free issue. A successful exploit of this vulnerability might lead to denial of service.

NVIDIA Triton Inference Server contains a vulnerability where an attacker could cause a path traversal issue. A successful exploit of this vulnerability might lead to denial of service.

In the Linux kernel, the following vulnerability has been resolved: nvme-tcp: fix NULL pointer dereferences in nvmet_tcp_build_pdu_iovec Commit efa56305908b ("nvmet-tcp: Fix a kernel panic when host sends an invalid H2C PDU length") added ttag bounds checking and data_offset validation in nvmet_tcp_handle_h2c_data_pdu(), but it did not validate whether the command's data structures (cmd->req.sg and cmd->iov) have been properly initialized before processing H2C_DATA PDUs. The nvmet_tcp_build_pdu_iovec() function dereferences these pointers without NULL checks. This can be triggered by sending H2C_DATA PDU immediately after the ICREQ/ICRESP handshake, before sending a CONNECT command or NVMe write command. Attack vectors that trigger NULL pointer dereferences: 1. H2C_DATA PDU sent before CONNECT → both pointers NULL 2. H2C_DATA PDU for READ command → cmd->req.sg allocated, cmd->iov NULL 3. H2C_DATA PDU for uninitialized command slot → both pointers NULL The fix validates both cmd->req.sg and cmd->iov before calling nvmet_tcp_build_pdu_iovec(). Both checks are required because: - Uninitialized commands: both NULL - READ commands: cmd->req.sg allocated, cmd->iov NULL - WRITE commands: both allocated

In the Linux kernel, the following vulnerability has been resolved: nvmet: fix race in nvmet_bio_done() leading to NULL pointer dereference There is a race condition in nvmet_bio_done() that can cause a NULL pointer dereference in blk_cgroup_bio_start(): 1. nvmet_bio_done() is called when a bio completes 2. nvmet_req_complete() is called, which invokes req->ops->queue_response(req) 3. The queue_response callback can re-queue and re-submit the same request 4. The re-submission reuses the same inline_bio from nvmet_req 5. Meanwhile, nvmet_req_bio_put() (called after nvmet_req_complete) invokes bio_uninit() for inline_bio, which sets bio->bi_blkg to NULL 6. The re-submitted bio enters submit_bio_noacct_nocheck() 7. blk_cgroup_bio_start() dereferences bio->bi_blkg, causing a crash: BUG: kernel NULL pointer dereference, address: 0000000000000028 #PF: supervisor read access in kernel mode RIP: 0010:blk_cgroup_bio_start+0x10/0xd0 Call Trace: submit_bio_noacct_nocheck+0x44/0x250 nvmet_bdev_execute_rw+0x254/0x370 [nvmet] process_one_work+0x193/0x3c0 worker_thread+0x281/0x3a0 Fix this by reordering nvmet_bio_done() to call nvmet_req_bio_put() BEFORE nvmet_req_complete(). This ensures the bio is cleaned up before the request can be re-submitted, preventing the race condition.

In the Linux kernel, the following vulnerability has been resolved: libceph: return the handler error from mon_handle_auth_done() Currently any error from ceph_auth_handle_reply_done() is propagated via finish_auth() but isn't returned from mon_handle_auth_done(). This results in higher layers learning that (despite the monitor considering us to be successfully authenticated) something went wrong in the authentication phase and reacting accordingly, but msgr2 still trying to proceed with establishing the session in the background. In the case of secure mode this can trigger a WARN in setup_crypto() and later lead to a NULL pointer dereference inside of prepare_auth_signature().

In the Linux kernel, the following vulnerability has been resolved: net: can: j1939: j1939_xtp_rx_rts_session_active(): deactivate session upon receiving the second rts Since j1939_session_deactivate_activate_next() in j1939_tp_rxtimer() is called only when the timer is enabled, we need to call j1939_session_deactivate_activate_next() if we cancelled the timer. Otherwise, refcount for j1939_session leaks, which will later appear as | unregister_netdevice: waiting for vcan0 to become free. Usage count = 2. problem.

In the Linux kernel, the following vulnerability has been resolved: RDMA/siw: Fix potential NULL pointer dereference in header processing If siw_get_hdr() returns -EINVAL before set_rx_fpdu_context(), qp->rx_fpdu can be NULL. The error path in siw_tcp_rx_data() dereferences qp->rx_fpdu->more_ddp_segs without checking, which may lead to a NULL pointer deref. Only check more_ddp_segs when rx_fpdu is present. KASAN splat: [ 101.384271] KASAN: null-ptr-deref in range [0x00000000000000c0-0x00000000000000c7] [ 101.385869] RIP: 0010:siw_tcp_rx_data+0x13ad/0x1e50

In the Linux kernel, the following vulnerability has been resolved: libceph: reset sparse-read state in osd_fault() When a fault occurs, the connection is abandoned, reestablished, and any pending operations are retried. The OSD client tracks the progress of a sparse-read reply using a separate state machine, largely independent of the messenger's state. If a connection is lost mid-payload or the sparse-read state machine returns an error, the sparse-read state is not reset. The OSD client will then interpret the beginning of a new reply as the continuation of the old one. If this makes the sparse-read machinery enter a failure state, it may never recover, producing loops like: libceph: [0] got 0 extents libceph: data len 142248331 != extent len 0 libceph: osd0 (1)...:6801 socket error on read libceph: data len 142248331 != extent len 0 libceph: osd0 (1)...:6801 socket error on read Therefore, reset the sparse-read state in osd_fault(), ensuring retries start from a clean state.

In the Linux kernel, the following vulnerability has been resolved: ip6_tunnel: use skb_vlan_inet_prepare() in __ip6_tnl_rcv() Blamed commit did not take care of VLAN encapsulations as spotted by syzbot [1]. Use skb_vlan_inet_prepare() instead of pskb_inet_may_pull(). [1] BUG: KMSAN: uninit-value in __INET_ECN_decapsulate include/net/inet_ecn.h:253 [inline] BUG: KMSAN: uninit-value in INET_ECN_decapsulate include/net/inet_ecn.h:275 [inline] BUG: KMSAN: uninit-value in IP6_ECN_decapsulate+0x7a8/0x1fa0 include/net/inet_ecn.h:321 __INET_ECN_decapsulate include/net/inet_ecn.h:253 [inline] INET_ECN_decapsulate include/net/inet_ecn.h:275 [inline] IP6_ECN_decapsulate+0x7a8/0x1fa0 include/net/inet_ecn.h:321 ip6ip6_dscp_ecn_decapsulate+0x16f/0x1b0 net/ipv6/ip6_tunnel.c:729 __ip6_tnl_rcv+0xed9/0x1b50 net/ipv6/ip6_tunnel.c:860 ip6_tnl_rcv+0xc3/0x100 net/ipv6/ip6_tunnel.c:903 gre_rcv+0x1529/0x1b90 net/ipv6/ip6_gre.c:-1 ip6_protocol_deliver_rcu+0x1c89/0x2c60 net/ipv6/ip6_input.c:438 ip6_input_finish+0x1f4/0x4a0 net/ipv6/ip6_input.c:489 NF_HOOK include/linux/netfilter.h:318 [inline] ip6_input+0x9c/0x330 net/ipv6/ip6_input.c:500 ip6_mc_input+0x7ca/0xc10 net/ipv6/ip6_input.c:590 dst_input include/net/dst.h:474 [inline] ip6_rcv_finish+0x958/0x990 net/ipv6/ip6_input.c:79 NF_HOOK include/linux/netfilter.h:318 [inline] ipv6_rcv+0xf1/0x3c0 net/ipv6/ip6_input.c:311 __netif_receive_skb_one_core net/core/dev.c:6139 [inline] __netif_receive_skb+0x1df/0xac0 net/core/dev.c:6252 netif_receive_skb_internal net/core/dev.c:6338 [inline] netif_receive_skb+0x57/0x630 net/core/dev.c:6397 tun_rx_batched+0x1df/0x980 drivers/net/tun.c:1485 tun_get_user+0x5c0e/0x6c60 drivers/net/tun.c:1953 tun_chr_write_iter+0x3e9/0x5c0 drivers/net/tun.c:1999 new_sync_write fs/read_write.c:593 [inline] vfs_write+0xbe2/0x15d0 fs/read_write.c:686 ksys_write fs/read_write.c:738 [inline] __do_sys_write fs/read_write.c:749 [inline] __se_sys_write fs/read_write.c:746 [inline] __x64_sys_write+0x1fb/0x4d0 fs/read_write.c:746 x64_sys_call+0x30ab/0x3e70 arch/x86/include/generated/asm/syscalls_64.h:2 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xd3/0xf80 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f Uninit was created at: slab_post_alloc_hook mm/slub.c:4960 [inline] slab_alloc_node mm/slub.c:5263 [inline] kmem_cache_alloc_node_noprof+0x9e7/0x17a0 mm/slub.c:5315 kmalloc_reserve+0x13c/0x4b0 net/core/skbuff.c:586 __alloc_skb+0x805/0x1040 net/core/skbuff.c:690 alloc_skb include/linux/skbuff.h:1383 [inline] alloc_skb_with_frags+0xc5/0xa60 net/core/skbuff.c:6712 sock_alloc_send_pskb+0xacc/0xc60 net/core/sock.c:2995 tun_alloc_skb drivers/net/tun.c:1461 [inline] tun_get_user+0x1142/0x6c60 drivers/net/tun.c:1794 tun_chr_write_iter+0x3e9/0x5c0 drivers/net/tun.c:1999 new_sync_write fs/read_write.c:593 [inline] vfs_write+0xbe2/0x15d0 fs/read_write.c:686 ksys_write fs/read_write.c:738 [inline] __do_sys_write fs/read_write.c:749 [inline] __se_sys_write fs/read_write.c:746 [inline] __x64_sys_write+0x1fb/0x4d0 fs/read_write.c:746 x64_sys_call+0x30ab/0x3e70 arch/x86/include/generated/asm/syscalls_64.h:2 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xd3/0xf80 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f CPU: 0 UID: 0 PID: 6465 Comm: syz.0.17 Not tainted syzkaller #0 PREEMPT(none) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/25/2025

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_conncount: update last_gc only when GC has been performed Currently last_gc is being updated everytime a new connection is tracked, that means that it is updated even if a GC wasn't performed. With a sufficiently high packet rate, it is possible to always bypass the GC, causing the list to grow infinitely. Update the last_gc value only when a GC has been actually performed.

In the Linux kernel, the following vulnerability has been resolved: VFS: fix possible failure to unlock in nfsd4_create_file() atomic_create() in fs/namei.c drops the reference to the dentry when it returns an error. This behaviour was imported into dentry_create() so that it will drop the reference if an error is returned from atomic_create(), though not if vfs_create() returns an error (in the case where ->atomic_create is not supported). The caller - nfsd4_create_file() - is made aware of this by checking path->dentry, which will either be a counted reference to a dentry, or an error pointer. However the change to use start_creating()/end_creating() (which landed shortly before the dentry_create() change landed, though was likely developed around the same time) means that nfsd4_create_file() *needs* a valid dentry so that it can unlock the parent. The net result is that if NFSD exports a filesystem which uses ->atomic_create, and if a call to ->atomic_create returns an error, then nfsd4_create_file() will pass an error pointer to end_creating() and the parent will not be unlocked. Fix this by changing dentry_create() to make sure path->dentry is always a valid dentry, never an error-pointer. The actual error is already returned a different way. Note that if ->atomic_create() returns a different dentry (which may not be possible in practice) we are guaranteed (because it is only ever provided by d_spliace_alias()) that it will have the same d_parent and so it will have the same effect when passed to end_creating().

In the Linux kernel, the following vulnerability has been resolved: libceph: make free_choose_arg_map() resilient to partial allocation free_choose_arg_map() may dereference a NULL pointer if its caller fails after a partial allocation. For example, in decode_choose_args(), if allocation of arg_map->args fails, execution jumps to the fail label and free_choose_arg_map() is called. Since arg_map->size is updated to a non-zero value before memory allocation, free_choose_arg_map() will iterate over arg_map->args and dereference a NULL pointer. To prevent this potential NULL pointer dereference and make free_choose_arg_map() more resilient, add checks for pointers before iterating.

In the Linux kernel, the following vulnerability has been resolved: gue: Fix skb memleak with inner IP protocol 0. syzbot reported skb memleak below. [0] The repro generated a GUE packet with its inner protocol 0. gue_udp_recv() returns -guehdr->proto_ctype for "resubmit" in ip_protocol_deliver_rcu(), but this only works with non-zero protocol number. Let's drop such packets. Note that 0 is a valid number (IPv6 Hop-by-Hop Option). I think it is not practical to encap HOPOPT in GUE, so once someone starts to complain, we could pass down a resubmit flag pointer to distinguish two zeros from the upper layer: * no error * resubmit HOPOPT [0] BUG: memory leak unreferenced object 0xffff888109695a00 (size 240): comm "syz.0.17", pid 6088, jiffies 4294943096 hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 40 c2 10 81 88 ff ff 00 00 00 00 00 00 00 00 .@.............. backtrace (crc a84b336f): kmemleak_alloc_recursive include/linux/kmemleak.h:44 [inline] slab_post_alloc_hook mm/slub.c:4958 [inline] slab_alloc_node mm/slub.c:5263 [inline] kmem_cache_alloc_noprof+0x3b4/0x590 mm/slub.c:5270 __build_skb+0x23/0x60 net/core/skbuff.c:474 build_skb+0x20/0x190 net/core/skbuff.c:490 __tun_build_skb drivers/net/tun.c:1541 [inline] tun_build_skb+0x4a1/0xa40 drivers/net/tun.c:1636 tun_get_user+0xc12/0x2030 drivers/net/tun.c:1770 tun_chr_write_iter+0x71/0x120 drivers/net/tun.c:1999 new_sync_write fs/read_write.c:593 [inline] vfs_write+0x45d/0x710 fs/read_write.c:686 ksys_write+0xa7/0x170 fs/read_write.c:738 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xa4/0xf80 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f

In the Linux kernel, the following vulnerability has been resolved: tls: Purge async_hold in tls_decrypt_async_wait() The async_hold queue pins encrypted input skbs while the AEAD engine references their scatterlist data. Once tls_decrypt_async_wait() returns, every AEAD operation has completed and the engine no longer references those skbs, so they can be freed unconditionally. A subsequent patch adds batch async decryption to tls_sw_read_sock(), introducing a new call site that must drain pending AEAD operations and release held skbs. Move __skb_queue_purge(&ctx->async_hold) into tls_decrypt_async_wait() so the purge is centralized and every caller -- recvmsg's drain path, the -EBUSY fallback in tls_do_decryption(), and the new read_sock batch path -- releases held skbs on synchronization without each site managing the purge independently. This fixes a leak when tls_strp_msg_hold() fails part-way through, after having added some cloned skbs to the async_hold queue. tls_decrypt_sg() will then call tls_decrypt_async_wait() to process all pending decrypts, and drop back to synchronous mode, but tls_sw_recvmsg() only flushes the async_hold queue when one record has been processed in "fully-async" mode, which may not be the case here. [pabeni@redhat.com: added leak comment]

A memory leak vulnerability was found in Linux kernel in llcp_sock_connect

CAI Content Credentials is affected by an Improper Input Validation vulnerability that could result in an application denial-of-service. An attacker could exploit this vulnerability to crash the application, leading to a denial-of-service condition. Exploitation of this issue does not require user interaction.

xHTTP 72f812d has a double free in close_connection in xhttp.c via a malformed HTTP request method.

.NET and Visual Studio Denial of Service Vulnerability

.NET, .NET Framework, and Visual Studio Denial of Service Vulnerability

IBM Db2 11.5.0 through 11.5.9, and 12.1.0 through 12.1.4 is vulnerable to a denial of service with a specially crafted query when autonomous transactions are enabled.

.NET and Visual Studio Denial of Service Vulnerability

IBM TXSeries for Multiplatforms 10.1 could allow a remote attacker to cause a denial of service using persistent connections due to improper allocation of resources.

IBM Db2 for Linux, UNIX and Windows (includes Db2 Connect Server) is vulnerable to a denial of service as the server may crash when an Out of Memory occurs using the DBMS_OUTPUT module. IBM X-Force ID: 247868.

IBM TXSeries for Multiplatforms 10.1 is vulnerable to a denial of service, caused by improper enforcement of the timeout on individual read operations. By conducting a slowloris-type attacks, a remote attacker could exploit this vulnerability to cause a denial of service.