In WAGO I/O-Check Service in multiple products an attacker can send a specially crafted packet containing OS commands to crash the diagnostic tool and write memory.

Cap'n Proto is a data interchange format and capability-based RPC system. In versions 1.0 and 1.0.1, when using the KJ HTTP library with WebSocket compression enabled, a buffer underrun can be caused by a remote peer. The underrun always writes a constant value that is not attacker-controlled, likely resulting in a crash, enabling a remote denial-of-service attack. Most Cap'n Proto and KJ users are unlikely to have this functionality enabled and so unlikely to be affected. Maintainers suspect only the Cloudflare Workers Runtime is affected. If KJ HTTP is used with WebSocket compression enabled, a malicious peer may be able to cause a buffer underrun on a heap-allocated buffer. KJ HTTP is an optional library bundled with Cap'n Proto, but is not directly used by Cap'n Proto. WebSocket compression is disabled by default. It must be enabled via a setting passed to the KJ HTTP library via `HttpClientSettings` or `HttpServerSettings`. The bytes written out-of-bounds are always a specific constant 4-byte string `{ 0x00, 0x00, 0xFF, 0xFF }`. Because this string is not controlled by the attacker, maintainers believe it is unlikely that remote code execution is possible. However, it cannot be ruled out. This functionality first appeared in Cap'n Proto 1.0. Previous versions are not affected. This issue is fixed in Cap'n Proto 1.0.1.1.

There is a possible out of bounds write due to a missing bounds check.Product: AndroidVersions: Android SoCAndroid ID: A-170372514

ConnMan (aka Connection Manager) 1.30 through 1.39 has a stack-based buffer overflow in uncompress in dnsproxy.c via NAME, RDATA, or RDLENGTH (for A or AAAA).

Ampere AmpereOne AC03 devices before 3.5.9.3, AmpereOne AC04 devices before 4.4.5.2, and AmpereOne M devices before 5.4.5.1 allow an incorrectly formed SMC call to UEFI-MM MMCommunicate service that could result in an out-of-bounds write within the UEFI-MM Secure Partition context.

A stack-based buffer overflow vulnerability exists in the OpenPLC Runtime EtherNet/IP parser functionality of OpenPLC _v3 b4702061dc14d1024856f71b4543298d77007b88. A specially crafted EtherNet/IP request can lead to remote code execution. An attacker can send a series of EtherNet/IP requests to trigger this vulnerability.

Ampere AmpereOne AC03 devices before 3.5.9.3, AmpereOne AC04 devices before 4.4.5.2, and AmpereOne M devices before 5.4.5.1 allow an incorrectly formed SMC call to UEFI-MM PCIe driver that could result in an out-of-bounds write within PCIe driver’s S-EL0 address space.

Buffer Overflow vulnerability in ASUS router RT-AX88U with firmware versions v3.0.0.4.388_24198 allows a remote attacker to execute arbitrary code via the connection_state_machine due to improper length validation for the cookie field.

Fast DDS is a C++ implementation of the DDS (Data Distribution Service) standard of the OMG (Object Management Group ). Prior to versions 3.4.1, 3.3.1, and 2.6.11, a heap buffer overflow exists in the Fast-DDS DATA_FRAG receive path. An un authenticated sender can transmit a single malformed RTPS DATA_FRAG packet where `fragmentSize` and `sampleSize` are craft ed to violate internal assumptions. Due to a 4-byte alignment step during fragment metadata initialization, the code write s past the end of the allocated payload buffer, causing immediate crash (DoS) and potentially enabling memory corruption ( RCE risk). Versions 3.4.1, 3.3.1, and 2.6.11 patch the issue.

libspf2 before 1.2.11 has a heap-based buffer overflow that might allow remote attackers to execute arbitrary code (via an unauthenticated e-mail message from anywhere on the Internet) with a crafted SPF DNS record, because of SPF_record_expand_data in spf_expand.c. The amount of overflowed data depends on the relationship between the length of an entire domain name and the length of its leftmost label. The vulnerable code may be part of the supply chain of a site's e-mail infrastructure (e.g., with additional configuration, Exim can use libspf2; the Postfix web site links to unofficial patches for use of libspf2 with Postfix; older versions of spfquery relied on libspf2) but most often is not.

An issue was discovered in WinAPRS 2.9.0. A buffer overflow in the VHF KISS TNC component allows a remote attacker to achieve remote code execution via malicious AX.25 packets over the air. NOTE: This vulnerability only affects products that are no longer supported by the maintainer

Matrix libolm before 3.2.3 allows a malicious Matrix homeserver to crash a client (while it is attempting to retrieve an Olm encrypted room key backup from the homeserver) because olm_pk_decrypt has a stack-based buffer overflow. Remote code execution might be possible for some nonstandard build configurations.

libspf2 before 1.2.11 has a four-byte heap-based buffer overflow that might allow remote attackers to execute arbitrary code (via an unauthenticated e-mail message from anywhere on the Internet) with a crafted SPF DNS record, because of incorrect sprintf usage in SPF_record_expand_data in spf_expand.c. The vulnerable code may be part of the supply chain of a site's e-mail infrastructure (e.g., with additional configuration, Exim can use libspf2; the Postfix web site links to unofficial patches for use of libspf2 with Postfix; older versions of spfquery relied on libspf2) but most often is not.

A buffer overflow vulnerability was discovered in Zoom Client for Meetings (for Android, iOS, Linux, macOS, and Windows) before version 5.8.4, Zoom Client for Meetings for Blackberry (for Android and iOS) before version 5.8.1, Zoom Client for Meetings for intune (for Android and iOS) before version 5.8.4, Zoom Client for Meetings for Chrome OS before version 5.0.1, Zoom Rooms for Conference Room (for Android, AndroidBali, macOS, and Windows) before version 5.8.3, Controllers for Zoom Rooms (for Android, iOS, and Windows) before version 5.8.3, Zoom VDI Windows Meeting Client before version 5.8.4, Zoom VDI Azure Virtual Desktop Plugins (for Windows x86 or x64, IGEL x64, Ubuntu x64, HP ThinPro OS x64) before version 5.8.4.21112, Zoom VDI Citrix Plugins (for Windows x86 or x64, Mac Universal Installer & Uninstaller, IGEL x64, eLux RP6 x64, HP ThinPro OS x64, Ubuntu x64, CentOS x 64, Dell ThinOS) before version 5.8.4.21112, Zoom VDI VMware Plugins (for Windows x86 or x64, Mac Universal Installer & Uninstaller, IGEL x64, eLux RP6 x64, HP ThinPro OS x64, Ubuntu x64, CentOS x 64, Dell ThinOS) before version 5.8.4.21112, Zoom Meeting SDK for Android before version 5.7.6.1922, Zoom Meeting SDK for iOS before version 5.7.6.1082, Zoom Meeting SDK for macOS before version 5.7.6.1340, Zoom Meeting SDK for Windows before version 5.7.6.1081, Zoom Video SDK (for Android, iOS, macOS, and Windows) before version 1.1.2, Zoom On-Premise Meeting Connector Controller before version 4.8.12.20211115, Zoom On-Premise Meeting Connector MMR before version 4.8.12.20211115, Zoom On-Premise Recording Connector before version 5.1.0.65.20211116, Zoom On-Premise Virtual Room Connector before version 4.4.7266.20211117, Zoom On-Premise Virtual Room Connector Load Balancer before version 2.5.5692.20211117, Zoom Hybrid Zproxy before version 1.0.1058.20211116, and Zoom Hybrid MMR before version 4.6.20211116.131_x86-64. This can potentially allow a malicious actor to crash the service or application, or leverage this vulnerability to execute arbitrary code.

There is a remote stack-based buffer overflow (SEH) in register.ghp in EFS Software Easy Chat Server versions 2.0 to 3.1. By sending an overly long username string to registresult.htm for registering the user, an attacker may be able to execute arbitrary code.

A stack buffer overflow vulnerability has been reported to affect QNAP device running QUSBCam2. If exploited, this vulnerability allows attackers to execute arbitrary code. We have already fixed this vulnerability in the following versions of QUSBCam2: QTS 4.5.4: QUSBCam2 1.1.4 ( 2021/07/30 ) and later QTS 5.0: QUSBCam2 2.0.1 ( 2021/08/03 ) and later QTS 4.3.6: QUSBCam2 1.1.4 ( 2021/07/30 ) and later QTS 4.3.3: QUSBCam2 1.1.4 ( 2021/08/06 ) and later QuTS hero 4.5.3: QUSBCam2 1.1.4 ( 2021/07/30 ) and later

A stack buffer overflow vulnerability has been reported to affect QNAP device running NVR Storage Expansion. If exploited, this vulnerability allows attackers to execute arbitrary code. We have already fixed this vulnerability in the following versions of NVR Storage Expansion: NVR Storage Expansion 1.0.6 ( 2021/08/03 ) and later

Wazuh is a free and open source platform used for threat prevention, detection, and response. There is a buffer overflow hazard in wazuh-analysisd when handling Unicode characters from Windows Eventchannel messages. It impacts Wazuh Manager 3.8.0 and above. This vulnerability is fixed in Wazuh Manager 4.7.2.

Buffer Overflow in Netgear R8000 Router with firmware v1.0.4.56 allows remote attackers to execute arbitrary code or cause a denial-of-service by sending a crafted POST to '/bd_genie_create_account.cgi' with a sufficiently long parameter 'register_country'.

There is a possible out of bounds write due to a missing bounds check.Product: AndroidVersions: Android SoCAndroid ID: A-170367562

Pillow through 8.2.0 and PIL (aka Python Imaging Library) through 1.1.7 allow an attacker to pass controlled parameters directly into a convert function to trigger a buffer overflow in Convert.c.

A vulnerability in the Control and Provisioning of Wireless Access Points (CAPWAP) protocol processing of Cisco IOS XE Software for Cisco Catalyst 9000 Family Wireless Controllers could allow an unauthenticated, remote attacker to execute arbitrary code with administrative privileges or cause a denial of service (DoS) condition on an affected device. The vulnerability is due to a logic error that occurs during the validation of CAPWAP packets. An attacker could exploit this vulnerability by sending a crafted CAPWAP packet to an affected device. A successful exploit could allow the attacker to execute arbitrary code with administrative privileges or cause the affected device to crash and reload, resulting in a DoS condition.

A vulnerability in the vDaemon process in Cisco IOS XE SD-WAN Software could allow an unauthenticated, remote attacker to cause a buffer overflow on an affected device. This vulnerability is due to insufficient bounds checking when an affected device processes traffic. An attacker could exploit this vulnerability by sending crafted traffic to the device. A successful exploit could allow the attacker to cause a buffer overflow and possibly execute arbitrary commands with root-level privileges, or cause the device to reload, which could result in a denial of service condition.

A buffer overflow vulnerability exists in the GetValue functionality of TCL LinkHub Mesh Wi-Fi MS1G_00_01.00_14. A specially-crafted configuration value can lead to a buffer overflow. An attacker can modify a configuration value to trigger this vulnerability.This vulnerability represents all occurances of the buffer overflow vulnerability within the cfm binary.

A flaw was found in libmicrohttpd. A missing bounds check in the post_process_urlencoded function leads to a buffer overflow, allowing a remote attacker to write arbitrary data in an application that uses libmicrohttpd. The highest threat from this vulnerability is to data confidentiality and integrity as well as system availability. Only version 0.9.70 is vulnerable.

Foxit Reader before 10.1.4 and PhantomPDF before 10.1.4 have an out-of-bounds write because the Cross-Reference table is mishandled during Office document conversion.

FreeRDP is a free implementation of the Remote Desktop Protocol. FreeRDP based clients using a version of FreeRDP prior to 3.5.0 or 2.11.6 are vulnerable to integer overflow and out-of-bounds write. Versions 3.5.0 and 2.11.6 patch the issue. As a workaround, do not use `/gfx` options (e.g. deactivate with `/bpp:32` or `/rfx` as it is on by default).

A vulnerability in the Universal Plug-and-Play (UPnP) service of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an unauthenticated, remote attacker to execute arbitrary code or cause an affected device to restart unexpectedly, resulting in a denial of service (DoS) condition. This vulnerability is due to improper validation of incoming UPnP traffic. An attacker could exploit this vulnerability by sending a crafted UPnP request to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the device to reload, resulting in a DoS condition. Cisco has not released software updates that address this vulnerability.

In BCMFASTPATH of dhd_msgbuf.c, there is a possible out of bounds write due to a missing bounds check. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation.

A vulnerability has been identified in SIPROTEC 5 relays with CPU variants CP050 (All versions < V8.80), SIPROTEC 5 relays with CPU variants CP100 (All versions < V8.80), SIPROTEC 5 relays with CPU variants CP300 (All versions < V8.80). Specially crafted packets sent to port 4443/tcp could cause a Denial-of-Service condition or potential remote code execution.

HDF5 library through 1.14.3 has memory corruption in H5A__close resulting in the corruption of the instruction pointer and causing denial of service or potential code execution.

dpic 2021.04.10 has a Heap Buffer Overflow in themakevar() function in dpic.y

Tenda FH1202 v1.2.0.14(408) has a stack overflow vulnerability in the security parameter of the formWifiBasicSet function.

An issue in newlib v.4.3.0 allows an attacker to execute arbitrary code via the time unit scaling in the _gettimeofday function.

Tenda AX1803 v1.0.0.1 contains a stack overflow via the serviceName parameter in the function fromAdvSetMacMtuWan.

CODESYS Control Runtime system before 3.5.17.10 has a Heap-based Buffer Overflow.

D-Link DIR-809 devices with firmware through DIR-809Ax_FW1.12WWB03_20190410 were discovered to contain a stack buffer overflow vulnerability in the function FUN_8004776c in /formVirtualApp. This vulnerability is triggered via a crafted POST request.

D-Link DIR-809 devices with firmware through DIR-809Ax_FW1.12WWB03_20190410 were discovered to contain a stack buffer overflow vulnerability in the function sub_8003183C in /fromLogin. This vulnerability is triggered via a crafted POST request.

An exploitable stack-based buffer overflow vulnerability exists in the web management interface used by the Foscam C1 Indoor HD Camera. A specially crafted http request can cause a stack-based buffer overflow resulting in overwriting arbitrary data on the stack frame. An attacker can simply send an http request to the device to trigger this vulnerability.

Shenzhen Libituo Technology Co., Ltd LBT-T300-mini v1.2.9 was discovered to contain a buffer overflow via the vpn_client_ip parameter at /apply.cgi.

Advantech WebAccess versions 9.02 and prior are vulnerable to a heap-based buffer overflow, which may allow an attacker to remotely execute code.

Azure RTOS NetX Duo is a TCP/IP network stack designed specifically for deeply embedded real-time and IoT applications. An attacker can cause remote code execution due to memory overflow vulnerabilities in Azure RTOS NETX Duo. The affected components include processes/functions related to snmp, smtp, ftp and dtls in RTOS v6.2.1 and below. The fixes have been included in NetX Duo release 6.3.0. Users are advised to upgrade. There are no known workarounds for this vulnerability.

Annke N48PBB (Network Video Recorder) products of version 3.4.106 build 200422 and prior are vulnerable to a stack-based buffer overflow, which allows an unauthorized remote attacker to execute arbitrary code with the same privileges as the server user (root).

An attacker was able to perform an out-of-bounds read or write on a JavaScript object by fooling range-based bounds check elimination. This vulnerability affects Firefox < 124.0.1.

Buffer Overflow vulnerability in NEXTU FLATA AX1500 Router v.1.0.2 allows a remote attacker to execute arbitrary code via the POST request handler component.

The affected product is vulnerable to a stack-based buffer overflow, which may allow an attacker to remotely execute arbitrary code on the WebAccess/SCADA (WebAccess/SCADA versions prior to 8.4.5, WebAccess/SCADA versions prior to 9.0.1).

Tenda FH1203 V2.0.1.6 was discovered to contain a stack overflow via the page parameter in the fromVirtualSer function.

Tenda AC18 V15.03.05.05 has a stack overflow vulnerability in the mitInterface parameter of fromAddressNat function.

Buffer overflow in pngpread.c in libpng before 1.2.44 and 1.4.x before 1.4.3, as used in progressive applications, might allow remote attackers to execute arbitrary code via a PNG image that triggers an additional data row.