An issue was discovered in Geomatika IsiGeo Web 6.0. It allows remote authenticated users to execute commands.

IBM DataStage on Cloud Pak for Data 5.1.2 through 5.3.0 could allow an authenticated user to execute arbitrary commands with normal user privileges on the system due to improper validation of user supplied input through the user-defined function component.

An OS command injection vulnerability exists in the vtysh_ubus tcpdump_start_cb functionality of Milesight UR32L v32.3.0.5. A specially crafted HTTP request can lead to command execution. An authenticated attacker can send an HTTP request to trigger this vulnerability.

An OS command injection vulnerability has been reported to affect QUSBCam2. If exploited, the vulnerability could allow users to execute commands via a network. We have already fixed the vulnerability in the following version: QUSBCam2 2.0.3 ( 2023/06/15 ) and later

A post-authentication command injection vulnerability in the log file download function of the Zyxel EX3301-T0 firmware versions through 5.50(ABVY.7)C0 could allow an authenticated attacker to execute operating system (OS) commands on an affected device.

Grandstream UCM6204 before 1.0.19.20 devices allow remote authenticated users to execute arbitrary code via shell metacharacters in the backupUCMConfig file-backup parameter to the /cgi? URI.

Grandstream GWN7000 before 1.0.6.32 devices allow remote authenticated users to execute arbitrary code via shell metacharacters in the filename in a /ubus/uci.apply update_nds_webroot_from_tmp API call.

FPT G-97RG6M R4.2.98.035 and G-97RG3 R4.2.43.078 are vulnerable to Remote Command Execution in the ping function.

IBM DataStage on Cloud Pak for Data 5.1.2 through 5.3.0 could allow an authenticated user to execute arbitrary commands with normal user privileges on the system due to improper validation of user supplied input through the job subroutine component.

Grandstream GWN7610 before 1.0.8.18 devices allow remote authenticated users to execute arbitrary code via shell metacharacters in the filename in a /ubus/controller.icc.update_nds_webroot_from_tmp update_nds_webroot_from_tmp API call.

A security flaw has been discovered in ZSPACE Q2C NAS up to 1.1.0210050. Affected by this vulnerability is the function zfilev2_api.SafeStatus of the file /v2/file/safe/status of the component HTTP POST Request Handler. The manipulation of the argument safe_dir results in command injection. The attack may be performed from remote. The exploit has been released to the public and may be exploited. The vendor was contacted early about this disclosure and confirmed the existence of the vulnerability. A technical fix is planned to be released.

A vulnerability was identified in ZSPACE Q2C NAS up to 1.1.0210050. Affected is the function zfilev2_api.CloseSafe of the file /v2/file/safe/close of the component HTTP POST Request Handler. The manipulation of the argument safe_dir leads to command injection. The attack is possible to be carried out remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure and confirmed the existence of the vulnerability. A technical fix is planned to be released.

A vulnerability was determined in D-Link DCS-930L 1.15.04. This affects an unknown part of the file /setSystemAdmin of the component alphapd. Executing manipulation of the argument AdminID can lead to command injection. The attack can be executed remotely. The exploit has been publicly disclosed and may be utilized. This vulnerability only affects products that are no longer supported by the maintainer.

jc21 NGINX Proxy Manager through 2.9.19 allows OS command injection. When creating an access list, the backend builds an htpasswd file with crafted username and/or password input that is concatenated without any validation, and is directly passed to the exec command, potentially allowing an authenticated attacker to execute arbitrary commands on the system. NOTE: this is not part of any NGINX software shipped by F5.

A weakness has been identified in ZSPACE Q2C NAS up to 1.1.0210050. Affected by this issue is the function zfilev2_api.OpenSafe of the file /v2/file/safe/open of the component HTTP POST Request Handler. This manipulation of the argument safe_dir causes command injection. It is possible to initiate the attack remotely. The exploit has been made available to the public and could be exploited. The vendor was contacted early about this disclosure and confirmed the existence of the vulnerability. A technical fix is planned to be released.

IBM DataStage on Cloud Pak for Data 5.1.2 through 5.3.0 could allow an authenticated user to execute arbitrary commands with normal user privileges on the system due to improper validation of user supplied input through the wrapped command component.

IBM Aspera Orchestrator 4.0.0 through 4.1.0 could allow an authenticated user to execute arbitrary commands with elevated privileges on the system due to improper validation of user supplied input.

User provided input is not sanitized in the “Settings > Access Control” configuration interface allowing for arbitrary code execution.

A security flaw has been discovered in Wavlink NU516U1 M16U1_V240425. This vulnerability affects the function wzdap of the file /cgi-bin/adm.cgi. Performing a manipulation of the argument EncrypType/wl_Pass is directly passed by the attacker/so we can control the EncrypType/wl_Pass results in os command injection. The attack may be initiated remotely. The exploit has been released to the public and may be used for attacks. The vendor was contacted early about this disclosure.

Jenkins Git Client Plugin 2.8.4 and earlier and 3.0.0-rc did not properly restrict values passed as URL argument to an invocation of 'git ls-remote', resulting in OS command injection.

User provided input is not sanitized on the AXIS License Plate Verifier specific “api.cgi” allowing for arbitrary code execution.

Microhard Systems IPn4G 1.1.0 contains a service vulnerability that allows authenticated users to enable a restricted SSH shell with a default 'msshc' user. Attackers can exploit a custom 'ping' command in the NcFTP environment to escape the restricted shell and execute commands with root privileges.

In Fibaro Home Center 2 and Lite devices with firmware version 4.540 and older an authenticated user can run commands as root user using a command injection vulnerability.

Chamilo LMS is a learning management system. Prior to 1.11.38 and 2.0.0-RC.3, Chamilo LMS contains an OS Command Injection vulnerability in the file move function. The move() function in fileManage.lib.php passes user-controlled path values directly into exec() shell commands without using escapeshellarg(). When a user moves a document via document.php, the move_to POST parameter — which only passes through Security::remove_XSS() (an HTML-only filter) — is concatenated directly into shell commands such as exec("mv $source $target"). By default, Chamilo allows all authenticated users to create courses (allow_users_to_create_courses = true). Any user who is a teacher in a course (including self-created courses) can move documents, making this vulnerability exploitable by any authenticated user. The attacker must first place a directory with shell metacharacters in its name on the filesystem (achievable via Course Backup Import), then move a document into that directory to trigger arbitrary command execution as the web server user (www-data). This vulnerability is fixed in 1.11.38 and 2.0.0-RC.3.

A vulnerability was detected in Totolink NR1800X 9.1.0u.6279_B20210910. This affects the function sub_41A68C of the file /cgi-bin/cstecgi.cgi. Performing a manipulation of the argument setUssd results in command injection. The attack is possible to be carried out remotely. The exploit is now public and may be used.

An OS command injection vulnerability exists in the vtysh_ubus _get_fw_logs functionality of Milesight UR32L v32.3.0.5. A specially crafted network request can lead to command execution. An attacker can send a network request to trigger this vulnerability.

Nagios XI versions prior to 5.4.13 contain a remote code execution vulnerability in the Component Download page. The download/import handler used unsafe command construction with attacker-controlled input and lacked sufficient validation and output encoding, allowing an authenticated user to inject commands or otherwise execute arbitrary code with the privileges of the application service.

A vulnerability was identified in Wavlink NU516U1 M16U1_V240425. This affects the function wifi_region of the file /cgi-bin/adm.cgi. Such manipulation of the argument skiplist1/skiplist2 leads to os command injection. The attack can be launched remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure.

A vulnerability has been found in Tenda F453 up to 1.0.0.3. Impacted is the function TendaTelnet of the file /goform/telnet of the component Telnet Service. Such manipulation leads to command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.

A vulnerability was detected in Belkin F9K1015 1.00.10. Affected is an unknown function of the file /goform/mp. Performing a manipulation of the argument command results in command injection. The attack may be initiated remotely. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A weakness has been identified in Belkin F9K1015 1.00.10. Affected is an unknown function of the file /goform/formBSSetSitesurvey. Executing a manipulation of the argument wan_ipaddr can lead to command injection. The attack can be launched remotely. The exploit has been made available to the public and could be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way.

Command injection vulnerability was discovered in Netgear R6200 v2 firmware through R6200v2-V1.0.3.12 via binary /sbin/acos_service that could allow remote authenticated attackers the ability to modify values in the vulnerable parameter.

A vulnerability was determined in Belkin F9K1015 1.00.10. Impacted is an unknown function of the file /goform/formSetWanStatic. Executing a manipulation of the argument m_wan_ipaddr can lead to command injection. The attack may be performed from remote. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way.

IBM Aspera Orchestrator 4.0.1 could allow a remote authenticated attacker to execute arbitrary commands on the system by sending a specially crafted request. IBM X-Force ID: 260116.

A vulnerability was detected in Tenda AC7 15.03.06.44. This vulnerability affects unknown code of the file /goform/AdvSetLanip. The manipulation of the argument lanIp results in command injection. It is possible to launch the attack remotely. The exploit is now public and may be used.

A Command Injection vulnerability exists in FortiManager 5.2.1 and earlier and FortiManager 5.0.10 and earlier via unspecified vectors, which could let a malicious user run systems commands when executing a report.

Multiple vulnerabilities in the web-based management interface of Cisco Firepower Management Center (FMC) Software could allow an authenticated, remote attacker to execute arbitrary commands on the underlying operating system. To exploit these vulnerabilities, the attacker must have valid device credentials, but does not need Administrator privileges. These vulnerabilities are due to insufficient validation of user-supplied input for certain configuration options. An attacker could exploit these vulnerabilities by using crafted input within the device configuration GUI. A successful exploit could allow the attacker to execute arbitrary commands on the device, including on the underlying operating system, which could also affect the availability of the device.

Roxy-WI is a web interface for managing Haproxy, Nginx, Apache and Keepalived servers. In versions 8.2.6.4 and prior, POST /config/versions/<service>/<server_ip>/<configver>/save interpolates the URL-path configver parameter directly into a config-version path that ends up at os.system(f"dos2unix -q {cfg}"). configver is not run through EscapedString (Pydantic doesn't validate path segments declared as str) and the surrounding .. block is the broken tuple-membership patch from GHSA-vapt-004. An authenticated user with role <= 3 ("user") therefore reaches a bin/sh -c command-injection sink. At time of publication, there are no publicly available patches.

Cacti versions prior to 0.8.6-d contain a remote command execution vulnerability in the graph_view.php script. An authenticated user can inject arbitrary shell commands via the graph_start GET parameter, which is improperly handled during graph rendering. This flaw allows attackers to execute commands on the underlying operating system with the privileges of the web server process, potentially compromising system integrity.

A vulnerability was found in samanhappy MCPHub up to 0.9.10. Affected by this issue is some unknown functionality of the file src/controllers/serverController.ts. The manipulation of the argument command/args results in os command injection. The attack can be launched remotely. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was detected in Tenda HG3 2.0. The impacted element is an unknown function of the file /boaform/formCountrystr. The manipulation of the argument countrystr results in os command injection. The attack may be performed from remote. The exploit is now public and may be used.

A command injection vulnerability exists when the authorized user passes crafted parameter to background process in the router. This affects 360 router series products (360 Safe Router P0,P1,P2,P3,P4), the affected version is V2.0.61.58897.

Maxprint Maxlink 1200G v3.4.11E has an OS command injection vulnerability in the "Diagnostic tool" functionality of the device.

A weakness has been identified in Wavlink NU516U1 240425. This issue affects the function wzdapMesh of the file /cgi-bin/adm.cgi. This manipulation causes os command injection. The attack may be initiated remotely. The exploit has been made available to the public and could be used for attacks. The vendor was contacted early about this disclosure.

A vulnerability in the web UI of Cisco IOS XE Software could allow an authenticated, remote attacker to perform an injection attack against an affected device. This vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by sending crafted input to the web UI. A successful exploit could allow the attacker to execute arbitrary Cisco IOS XE Software CLI commands with level 15 privileges. Note: This vulnerability is exploitable only if the attacker obtains the credentials for a Lobby Ambassador account. This account is not configured by default.

A security vulnerability has been detected in Wavlink NU516U1 240425. Impacted is the function advance of the file /cgi-bin/wireless.cgi. Such manipulation of the argument wlan_conf/Channel/skiplist/ieee_80211h leads to os command injection. The attack may be launched remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure.

A security flaw has been discovered in Tenda HG3 2.0 300003070. This vulnerability affects the function formgponConf of the file /boaform/admin/formgponConf. The manipulation of the argument fmgpon_loid results in os command injection. It is possible to launch the attack remotely. The exploit has been released to the public and may be used for attacks.

Command injection vulnerability in the operating system in Circutor SGE-PLC1000/SGE-PLC50 v9.0.2 through the 'GetDNS()', 'CheckPing()' and 'TraceRoute()' functions.