TOTOLINK X18 V9.1.0cu.2053_B20230309 was discovered to contain a command injection vulnerability via the agentName parameter in the setEasyMeshAgentCfg function.

PbootCMS below v3.2.0 was discovered to contain a command injection vulnerability via create_function.

A Command Injection vulnerability has been identified in the MiVoice Office 400 SMB Controller through 1.2.5.23 which could allow a malicious actor to execute arbitrary commands within the context of the system.

NETSCOUT nGeniusPULSE 3.8 has a Command Injection Vulnerability.

TOTOLINK A6000R V1.0.1-B20201211.2000 was discovered to contain a command injection vulnerability via the cmd parameter in the webcmd function.

TOTOLINK X5000R_V9.1.0cu.2089_B20211224 and X5000R_V9.1.0cu.2350_B20230313 were discovered to contain a remote code execution (RCE) vulnerability via the lang parameter in the setLanguageCfg function.

Multiple OS command injection vulnerabilities exist in the login.cgi set_sys_init() functionality of Wavlink AC3000 M33A8.V5030.210505. A specially crafted HTTP request can lead to arbitrary code execution. An attacker can make an unauthenticated HTTP request to trigger these vulnerabilities.A command injection vulnerability exists within the `restart_min_value` POST parameter.

A weakness has been identified in D-Link DIR-816L 206b01. Affected by this issue is the function soapcgi_main of the file /soap.cgi. This manipulation of the argument service causes os command injection. Remote exploitation of the attack is possible. The exploit has been made available to the public and could be exploited. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability was found in Totolink X6000R AX3000 9.4.0cu.852_20230719. It has been rated as critical. This issue affects the function setWizardCfg of the file /cgi-bin/cstecgi.cgi of the component shttpd. The manipulation leads to command injection. The exploit has been disclosed to the public and may be used. The identifier VDB-254573 was assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

Improper Neutralization of Special Elements used in a Command vulnerability allows OS Command Injection via RCE. This issue affects Pandora FMS from 700 to 777.6 .

A vulnerability, which was classified as critical, was found in DrayTek Vigor2960 and Vigor300B 1.5.1.4. Affected is an unknown function of the file /cgi-bin/mainfunction.cgi/apmcfgupload of the component Web Management Interface. The manipulation of the argument session leads to os command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 1.5.1.5 is able to address this issue. It is recommended to upgrade the affected component.

A vulnerability, which was classified as critical, has been found in DrayTek Vigor2960 and Vigor300B 1.5.1.3/1.5.1.4. This issue affects some unknown processing of the file /cgi-bin/mainfunction.cgi/apmcfgupptim of the component Web Management Interface. The manipulation of the argument session leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 1.5.1.5 is able to address this issue. It is recommended to upgrade the affected component.

OPTILINK OP-XT71000N V2.2 is vulnerable to Remote Code Execution. The issue occurs when the attacker sends an arbitrary code on "/diag_ping_admin.asp" to "PingTest" interface that leads to COMMAND EXECUTION. An attacker can successfully trigger the COMMAND and can compromise full system.

EnerSys AMPA 22.09 and prior versions are vulnerable to command injection leading to privileged remote shell access.

A critical vulnerability has been discovered in Privileged Remote Access (PRA) and Remote Support (RS) products which can allow an unauthenticated attacker to inject commands that are run as a site user.

EnerSys AMPA versions 24.04 through 24.16, inclusive, are vulnerable to command injection leading to privileged remote shell access.

The Screensavercc component in eLux RP before 5.5.0 allows attackers to bypass intended configuration restrictions and execute arbitrary commands with root privileges by inserting commands in a local configuration dialog in the control panel.

Multiple OS command injection vulnerabilities exist in the login.cgi set_sys_init() functionality of Wavlink AC3000 M33A8.V5030.210505. A specially crafted HTTP request can lead to arbitrary code execution. An attacker can make an unauthenticated HTTP request to trigger these vulnerabilities.A command injection vulnerability exists within the `restart_week_value` POST parameter.

An issue was discovered on D-Link DCS-1130 devices. The device provides a user with the capability of setting a SMB folder for the video clippings recorded by the device. It seems that the POST parameters passed in this request (to test if email credentials and hostname sent to the device work properly) result in being passed as commands to a "system" API in the function and thus result in command injection on the device. If the firmware version is dissected using binwalk tool, we obtain a cramfs-root archive which contains the filesystem set up on the device that contains all the binaries. The library "libmailutils.so" is the one that has the vulnerable function "sub_1FC4" that receives the values sent by the POST request. If we open this binary in IDA-pro we will notice that this follows an ARM little endian format. The function sub_1FC4 in IDA pro is identified to be receiving the values sent in the POST request and the value set in POST parameter "receiver1" is extracted in function "sub_15AC" which is then passed to the vulnerable system API call. The vulnerable library function is accessed in "cgibox" binary at address 0x0008F598 which calls the "mailLoginTest" function in "libmailutils.so" binary as shown below which results in the vulnerable POST parameter being passed to the library which results in the command injection issue.

Unauthenticated remote code execution in OPTILINK OP-XT71000N, Hardware Version: V2.2 occurs when the attacker passes arbitrary commands with IP-ADDRESS using " | " to execute commands on " /diag_tracert_admin.asp " in the "PingTest" parameter that leads to command execution.

Arbitrary commands execution on the server by exploiting a command injection vulnerability in the LDAP authentication mechanism. This issue affects Pandora FMS: from 700 through <=777.4

Improper neutralization of special elements used in an OS command ('OS Command Injection') vulnerability in Task Manager component in Synology BeePhotos before 1.0.2-10026 and 1.1.0-10053 and Synology Photos before 1.6.2-0720 and 1.7.0-0795 allows remote attackers to execute arbitrary code via unspecified vectors.

A Command Injection vulnerability in Schneider Electric homeLYnk Controller exists in all versions before 1.5.0.

The flash_tool gem through 0.6.0 for Ruby allows command execution via shell metacharacters in the name of a downloaded file.

A command injection vulnerability exists in Moxa Inc VPort 461 Series Firmware Version 3.4 or lower that could allow a remote attacker to execute arbitrary commands in Moxa's VPort 461 Series Industrial Video Servers.

An issue in COMFAST CF-XR11 v.2.7.2 allows an attacker to execute arbitrary code via the ifname and mac parameters in the sub_410074 function at bin/webmgnt.

Eclipse Target Management: Terminal and Remote System Explorer (RSE) version <= 4.5.400 has a remote code execution vulnerability that does not require authentication. The fixed version is included in Eclipse IDE 2024-03

Operating system command injection vulnerability in AndSoft's e-TMS v25.03. This vulnerability allows an attacker to execute operating system commands on the server by sending a POST request. The relationship between parameter and assigned identifier is a 'm' parameter in '/clt/LOGINFRM_DJO.ASP'.

Operating system command injection vulnerability in AndSoft's e-TMS v25.03. This vulnerability allows an attacker to execute operating system commands on the server by sending a POST request. The relationship between parameter and assigned identifier is a 'm' parameter in '/clt/LOGINFRM_CAT.ASP'.

Dango-Translator v4.5.5 was discovered to contain a remote command execution (RCE) vulnerability via the component app/config/cloud_config.json.

Netgear R7100LG 1.0.0.78 was discovered to contain a command injection vulnerability via the password parameter at usb_remote_invite.cgi.

django-sspanel v2022.2.2 was discovered to contain a remote command execution (RCE) vulnerability via the component sspanel/admin_view.py -> GoodsCreateView._post.

In Pluck-4.7.10-dev2 admin background, a remote command execution vulnerability exists when uploading files.

A vulnerability classified as critical has been found in Tenda AC500 2.0.1.9(1307). Affected is the function formWriteFacMac of the file /goform/WriteFacMac. The manipulation of the argument mac leads to command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-261144. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability classified as critical was found in Totolink X2000R 1.0.0-B20221212.1452. Affected by this vulnerability is the function formMapDelDevice of the file /boafrm/formMapDelDevice. The manipulation of the argument macstr leads to command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

The Delta Electronics DVW-W02W2-E2 devices expose a web administration interface to users. This interface implements multiple features that are affected by command injections and stack overflows vulnerabilities. Successful exploitation of these flaws would allow remote unauthenticated attackers to gain remote code execution with elevated privileges on the affected devices. This issue affects DVW-W02W2-E2 through version 2.5.2.

Command Injection in Simiki v1.6.2.1 and prior allows remote attackers to execute arbitrary system commands via line 64 of the component 'simiki/blob/master/simiki/config.py'.

In JetBrains Junie before 252.284.66, 251.284.66, 243.284.66, 252.284.61, 251.284.61, 243.284.61, 252.284.50, 252.284.54, 251.284.54, 251.284.50, 243.284.54, 243.284.50 code execution was possible due to improper command validation

SystemK NVR 504/508/516 versions 2.3.5SK.30084998 and prior are vulnerable to a command injection vulnerability in the dynamic domain name system (DDNS) settings that could allow an attacker to execute arbitrary commands with root privileges.

GPT-SoVITS-WebUI is a voice conversion and text-to-speech webUI. In versions 20250228v3 and prior, there is a command injection vulnerability in webui.py change_label function. path_list takes user input, which is passed to the change_label function, which concatenates the user input into a command and runs it on the server, leading to arbitrary command execution. At time of publication, no known patched versions are available.

Operating system command injection vulnerability in AndSoft's e-TMS v25.03. This vulnerability allows an attacker to execute operating system commands on the server by sending a POST request. The relationship between parameter and assigned identifier is a 'm' parameter in '/clt/LOGINFRM_BET.ASP'.

Operating system command injection vulnerability in AndSoft's e-TMS v25.03. This vulnerability allows an attacker to execute operating system commands on the server by sending a POST request. The relationship between parameter and assigned identifier is a 'm' parameter in '/CLT/LOGINERRORFRM.ASP'.

The LearnPress plugin for WordPress is vulnerable to Command Injection in all versions up to, and including, 4.2.5.7 via the get_content function. This is due to the plugin making use of the call_user_func function with user input. This makes it possible for unauthenticated attackers to execute any public function with one parameter, which could result in remote code execution.

Roundcube Webmail before 1.5.7 and 1.6.x before 1.6.7 on Windows allows command injection via im_convert_path and im_identify_path. NOTE: this issue exists because of an incomplete fix for CVE-2020-12641.

Advantech iView, versions 5.6 and prior, has an improper neutralization of special elements used in a command (“command injection”) vulnerability. Successful exploitation of this vulnerability may allow an attacker to send a HTTP GET or POST request that creates a command string without any validation. The attacker may then remotely execute code.

On Draytek Vigor3900, Vigor2960, and Vigor 300B devices before 1.5.1.1, there are some command-injection vulnerabilities in the mainfunction.cgi file.

Operating system command injection vulnerability in AndSoft's e-TMS v25.03. This vulnerability allows an attacker to execute operating system commands on the server by sending a POST request. The relationship between parameter and assigned identifier is a 'm' parameter in '/clt/LOGINFRM_original.ASP'.

COMFAST CF-XR11 V2.7.2 has a command injection vulnerability detected at function sub_4143F0. Attackers can send POST request messages to /usr/bin/webmgnt and inject commands into parameter timestr.

ADB MCP Server is a MCP (Model Context Protocol) server for interacting with Android devices through ADB. In versions 0.1.0 and prior, the MCP Server is written in a way that is vulnerable to command injection vulnerability attacks as part of some of its MCP Server tool definition and implementation. This issue has been patched via commit 041729c.

The npm package `interactive-git-checkout` is an interactive command-line tool that allows users to checkout a git branch while it prompts for the branch name on the command-line. It is available as an npm package and can be installed via `npm install -g interactive-git-checkout`. Versions up to and including 1.1.4 of the `interactive-git-checkout` tool are vulnerable to a command injection vulnerability because the software passes the branch name to the `git checkout` command using the Node.js child process module's `exec()` function without proper input validation or sanitization. Commit 8dd832dd302af287a61611f4f85e157cd1c6bb41 fixes the issue.