js-libp2p is the official javascript Implementation of libp2p networking stack. Versions older than `v0.38.0` of js-libp2p are vulnerable to targeted resource exhaustion attacks. These attacks target libp2p’s connection, stream, peer, and memory management. An attacker can cause the allocation of large amounts of memory, ultimately leading to the process getting killed by the host’s operating system. While a connection manager tasked with keeping the number of connections within manageable limits has been part of js-libp2p, this component was designed to handle the regular churn of peers, not a targeted resource exhaustion attack. Users are advised to update their js-libp2p dependency to `v0.38.0` or greater. There are no known workarounds for this vulnerability.

go-libp2p is the offical libp2p implementation in the Go programming language. Version `0.18.0` and older of go-libp2p are vulnerable to targeted resource exhaustion attacks. These attacks target libp2p’s connection, stream, peer, and memory management. An attacker can cause the allocation of large amounts of memory, ultimately leading to the process getting killed by the host’s operating system. While a connection manager tasked with keeping the number of connections within manageable limits has been part of go-libp2p, this component was designed to handle the regular churn of peers, not a targeted resource exhaustion attack. Users are advised to upgrade their version of go-libp2p to version `0.18.1` or newer. Users unable to upgrade may consult the denial of service (dos) mitigation page for more information on how to incorporate mitigation strategies, monitor your application, and respond to attacks.

libp2p-rust is the official rust language Implementation of the libp2p networking stack. In versions prior to 0.45.1 an attacker node can cause a victim node to allocate a large number of small memory chunks, which can ultimately lead to the victim’s process running out of memory and thus getting killed by its operating system. When executed continuously, this can lead to a denial of service attack, especially relevant on a larger scale when run against more than one node of a libp2p based network. Users are advised to upgrade to `libp2p` `v0.45.1` or above. Users unable to upgrade should reference the DoS Mitigation page for more information on how to incorporate mitigation strategies, monitor their application, and respond to attacks: https://docs.libp2p.io/reference/dos-mitigation/.

Boxo, formerly known as go-libipfs, is a library for building IPFS applications and implementations. In versions 0.4.0 and 0.5.0, if an attacker is able allocate arbitrary many bytes in the Bitswap server, those allocations are lasting even if the connection is closed. This affects users accepting untrusted connections with the Bitswap server and also affects users using the old API stubs at `github.com/ipfs/go-libipfs/bitswap` because users then transitively import `github.com/ipfs/go-libipfs/bitswap/server`. Boxo versions 0.6.0 and 0.4.1 contain a patch for this issue. As a workaround, those who are using the stub object at `github.com/ipfs/go-libipfs/bitswap` not taking advantage of the features provided by the server can refactor their code to use the new split API that will allow them to run in a client only mode: `github.com/ipfs/go-libipfs/bitswap/client`.

github.com/ipfs/go-unixfsnode is an ADL IPLD prime node that wraps go-codec-dagpb's implementation of protobuf to enable pathing. In versions priot to 1.5.2 trying to read malformed HAMT sharded directories can cause panics and virtual memory leaks. If you are reading untrusted user input, an attacker can then trigger a panic. This is caused by bogus fanout parameter in the HAMT directory nodes. Users are advised to upgrade. There are no known workarounds for this vulnerability.

libp2p is a networking stack and library modularized out of The IPFS Project, and bundled separately for other tools to use. In go-libp2p, by using signed peer records a malicious actor can store an arbitrary amount of data in a remote node’s memory. This memory does not get garbage collected and so the victim can run out of memory and crash. If users of go-libp2p in production are not monitoring memory consumption over time, it could be a silent attack i.e. the attacker could bring down nodes over a period of time (how long depends on the node resources i.e. a go-libp2p node on a virtual server with 4 gb of memory takes about 90 sec to bring down; on a larger server, it might take a bit longer.) This issue was patched in version 0.27.4.

libp2p-rust is the official rust language Implementation of the libp2p networking stack. Prior to version 0.49.4, the Rust libp2p Gossipsub implementation contains a remotely reachable panic in backoff expiry handling. After a peer sends a crafted PRUNE control message with an attacker-controlled, near-maximum backoff value, the value is accepted and stored as an Instant near the representable upper bound. On a later heartbeat, the implementation performs unchecked Instant + Duration arithmetic (backoff_time + slack), which can overflow and panic with: overflow when adding duration to instant. This issue is reachable from any Gossipsub peer over normal TCP + Noise + mplex/yamux connectivity and requires no further authentication beyond becoming a protocol peer. This issue has been patched in version 0.49.4.

Yamux is a stream multiplexer over reliable, ordered connections such as TCP/IP. Prior to 0.13.10, the Rust implementation of Yamux can panic when processing a crafted inbound Data frame that sets SYN and uses a body length greater than DEFAULT_CREDIT (e.g. 262145). On the first packet of a new inbound stream, stream state is created and a receiver is queued before oversized-body validation completes. When validation fails, the temporary stream is dropped and cleanup may call remove(...).expect("stream not found"), triggering a panic in the connection state machine. This is remotely reachable over a normal Yamux session and does not require authentication. This vulnerability is fixed in 0.13.10.

libp2p-rust is the official rust language Implementation of the libp2p networking stack. In versions prior to 0.49.3, the Gossipsub implementation accepts attacker-controlled PRUNE backoff values and may perform unchecked time arithmetic when storing backoff state. A specially crafted PRUNE control message with an extremely large backoff (e.g. u64::MAX) can lead to Duration/Instant overflow during backoff update logic, triggering a panic in the networking state machine. This is remotely reachable over a normal libp2p connection and does not require authentication. Any application exposing a libp2p Gossipsub listener and using the affected backoff-handling path can be crashed by a network attacker that can reach the service port. The attack can be repeated by reconnecting and replaying the crafted control message. This issue has been fixed in version 0.49.3.

Yamux is a stream multiplexer over reliable, ordered connections such as TCP/IP. From 0.13.0 to before 0.13.9, a specially crafted WindowUpdate can cause arithmetic overflow in send-window accounting, which triggers a panic in the connection state machine. This is remotely reachable over a normal network connection and does not require authentication. This vulnerability is fixed in 0.13.9.

The dag-pb codec can panic when decoding invalid blocks.

An issue was discovered in the multihash crate before 0.11.3 for Rust. The from_slice parsing code can panic via unsanitized data from a network server.

libp2p-rust is the official rust language Implementation of the libp2p networking stack. Prior to 0.17.1, libp2p-rendezvous server has no limit on how many namespaces a single peer can register. A malicious peer can just keep registering unique namespaces in a loop and the server happily accepts every single one allocating memory for each registration with no pushback. Keep doing this long enough (or with multiple sybil peers) and the server process gets OOM killed. This vulnerability is fixed in 0.17.1.

go-bitfield is a simple bitfield package for the go language aiming to be more performant that the standard library. When feeding untrusted user input into the size parameter of `NewBitfield` and `FromBytes` functions, an attacker can trigger `panic`s. This happen when the `size` is a not a multiple of `8` or is negative. There were already a note in the `NewBitfield` documentation, however known users of this package are subject to this issue. Users are advised to upgrade. Users unable to upgrade should ensure that `size` is a multiple of 8 before calling `NewBitfield` or `FromBytes`.

go-ipld-prime is an implementation of the InterPlanetary Linked Data (IPLD) spec interfaces, a batteries-included codec implementations of IPLD for CBOR and JSON, and tooling for basic operations on IPLD objects. Encoding data which contains a Bytes kind Node will pass a Bytes token to the JSON encoder which will panic as it doesn't expect to receive Bytes tokens. Such an encode should be treated as an error, as plain JSON should not be able to encode Bytes. This only impacts uses of the `json` codec. `dag-json` is not impacted. Use of `json` as a decoder is not impacted. This issue is fixed in v0.19.0. As a workaround, one may prefer the `dag-json` codec, which has the ability to encode bytes.

go-merkledag implements the 'DAGService' interface and adds two ipld node types, Protobuf and Raw for the ipfs project. A `ProtoNode` may be modified in such a way as to cause various encode errors which will trigger a panic on common method calls that don't allow for error returns. A `ProtoNode` should only be able to encode to valid DAG-PB, attempting to encode invalid DAG-PB forms will result in an error from the codec. Manipulation of an existing (newly created or decoded) `ProtoNode` using the modifier methods did not account for certain states that would place the `ProtoNode` into an unencodeable form. Due to conformance with the [`github.com/ipfs/go-block-format#Block`](https://pkg.go.dev/github.com/ipfs/go-block-format#Block) and [`github.com/ipfs/go-ipld-format#Node`](https://pkg.go.dev/github.com/ipfs/go-ipld-format#Node) interfaces, certain methods, which internally require a re-encode if state has changed, will panic due to the inability to return an error. This issue has been addressed across a number of pull requests. Users are advised to upgrade to version 0.8.1 for a complete set of fixes. Users unable to upgrade may attempt to mitigate this issue by sanitising inputs when allowing user-input to set a new `CidBuilder` on a `ProtoNode` and by sanitising `Tsize` (`Link#Size`) values such that they are a reasonable byte-size for sub-DAGs where derived from user-input.

An issue was discovered in IPFS (aka go-ipfs) 0.4.23. An attacker can generate ephemeral identities (Sybils) and leverage the IPFS connection management reputation system to poison other nodes' routing tables, eclipsing the nodes that are the target of the attack from the rest of the network. Later versions, in particular go-ipfs 0.7, mitigate this.

A vulnerability has been identified in SCALANCE X204RNA (HSR) (All versions < V3.2.7), SCALANCE X204RNA (PRP) (All versions < V3.2.7), SCALANCE X204RNA EEC (HSR) (All versions < V3.2.7), SCALANCE X204RNA EEC (PRP) (All versions < V3.2.7), SCALANCE X204RNA EEC (PRP/HSR) (All versions < V3.2.7). Specially crafted PROFINET DCP packets could cause a denial of service condition of affected products.

Node.js versions 9.7.0 and later and 10.x are vulnerable and the severity is MEDIUM. A bug introduced in 9.7.0 increases the memory consumed when reading from the network into JavaScript using the net.Socket object directly as a stream. An attacker could use this cause a denial of service by sending tiny chunks of data in short succession. This vulnerability was restored by reverting to the prior behaviour.

In Eclipse Jetty versions 12.0.0 to 12.0.16 included, an HTTP/2 client can specify a very large value for the HTTP/2 settings parameter SETTINGS_MAX_HEADER_LIST_SIZE. The Jetty HTTP/2 server does not perform validation on this setting, and tries to allocate a ByteBuffer of the specified capacity to encode HTTP responses, likely resulting in OutOfMemoryError being thrown, or even the JVM process exiting.

A denial of service vulnerability in the multipart parsing component of Rack fixed in 2.0.9.2, 2.1.4.2, 2.2.4.1 and 3.0.0.1 could allow an attacker tocraft input that can cause RFC2183 multipart boundary parsing in Rack to take an unexpected amount of time, possibly resulting in a denial of service attack vector. Any applications that parse multipart posts using Rack (virtually all Rails applications) are impacted.

Pillow before 9.3.0 allows denial of service via SAMPLESPERPIXEL.

Uncontrolled resource consumption vulnerability in Cybozu Remote Service 4.0.0 to 4.0.3 allows a remote authenticated attacker to consume huge storage space, which may result in a denial-of-service (DoS) condition.

Apache IoTDB version 0.12.2 to 0.12.6, 0.13.0 to 0.13.2 are vulnerable to a Denial of Service attack when accepting untrusted patterns for REGEXP queries with Java 8. Users should upgrade to 0.13.3 which addresses this issue or use a later version of Java to avoid it.

XWiki Platform is a generic wiki platform offering runtime services for applications built on top of it. It's possible to make XWiki create many new schemas and fill them with tables just by using a crafted user identifier in the login form. This may lead to degraded database performance. The problem has been patched in XWiki 13.10.8, 14.6RC1 and 14.4.2. Users are advised to upgrade. There are no known workarounds for this issue.

Drivers are not always robust to extremely large draw calls and in some cases this scenario could have led to a crash. This vulnerability affects Firefox < 119, Firefox ESR < 115.4, and Thunderbird < 115.4.1.

In versions 16.1.x before 16.1.3.2 and 15.1.x before 15.1.5.1, when BIG-IP AFM Network Address Translation policy with IPv6/IPv4 translation rules is configured on a virtual server, undisclosed requests can cause an increase in memory resource utilization.

A flaw was found in XNIO. The XNIO NotifierState that can cause a Stack Overflow Exception when the chain of notifier states becomes problematically large can lead to uncontrolled resource management and a possible denial of service (DoS).

Large handshake records may cause panics in crypto/tls. Both clients and servers may send large TLS handshake records which cause servers and clients, respectively, to panic when attempting to construct responses. This affects all TLS 1.3 clients, TLS 1.2 clients which explicitly enable session resumption (by setting Config.ClientSessionCache to a non-nil value), and TLS 1.3 servers which request client certificates (by setting Config.ClientAuth >= RequestClientCert).

An uncontrolled resource consumption vulnerability [CWE-400] in FortiRecorder version 6.4.3 and below, 6.0.11 and below login authentication mechanism may allow an unauthenticated attacker to make the device unavailable via crafted GET requests.

An issue discovered in Python Charmers Future 0.18.2 and earlier allows remote attackers to cause a denial of service via crafted Set-Cookie header from malicious web server.

Transient DOS due to uncontrolled resource consumption in WLAN firmware when peer is freed in non qos state.

Denial-of-service in the Audio/Video: Playback component. This vulnerability was fixed in Firefox 150 and Thunderbird 150.

The Diffie-Hellman Key Agreement Protocol allows use of long exponents that arguably make certain calculations unnecessarily expensive, because the 1996 van Oorschot and Wiener paper found that "(appropriately) short exponents" can be used when there are adequate subgroup constraints, and these short exponents can lead to less expensive calculations than for long exponents. This issue is different from CVE-2002-20001 because it is based on an observation about exponent size, rather than an observation about numbers that are not public keys. The specific situations in which calculation expense would constitute a server-side vulnerability depend on the protocol (e.g., TLS, SSH, or IKE) and the DHE implementation details. In general, there might be an availability concern because of server-side resource consumption from DHE modular-exponentiation calculations. Finally, it is possible for an attacker to exploit this vulnerability and CVE-2002-20001 together.

Mattermost fails to enforce a limit for the size of the cache entry for OpenGraph data allowing an attacker to send a specially crafted request to the /api/v4/opengraph filling the cache and turning the server unavailable.

In Progress® Telerik® UI for AJAX prior to 2026.1.421, RadAsyncUpload contains an uncontrolled resource consumption vulnerability that allows file uploads to exceed the configured maximum size due to missing cumulative size enforcement during chunk reassembly, leading to disk space exhaustion.

Denial-of-service in the WebRTC: Signaling component. This vulnerability was fixed in Firefox 149, Firefox ESR 140.9, Thunderbird 149, and Thunderbird 140.9.

Denial-of-service in the Libraries component in NSS. This vulnerability was fixed in Firefox 149 and Thunderbird 149.

Denial-of-service in the XML component. This vulnerability was fixed in Firefox 149 and Thunderbird 149.

conduit-hyper integrates a conduit application with the hyper server. Prior to version 0.4.2, `conduit-hyper` did not check any limit on a request's length before calling [`hyper::body::to_bytes`](https://docs.rs/hyper/latest/hyper/body/fn.to_bytes.html). An attacker could send a malicious request with an abnormally large `Content-Length`, which could lead to a panic if memory allocation failed for that request. In version 0.4.2, `conduit-hyper` sets an internal limit of 128 MiB per request, otherwise returning status 400 ("Bad Request"). This crate is part of the implementation of Rust's [crates.io](https://crates.io/), but that service is not affected due to its existing cloud infrastructure, which already drops such malicious requests. Even with the new limit in place, `conduit-hyper` is not recommended for production use, nor to directly serve the public Internet.

Impact: A bad regular expression is generated any time you have multiple sequential optional groups (curly brace syntax), such as `{a}{b}{c}:z`. The generated regex grows exponentially with the number of groups, causing denial of service. Patches: Fixed in version 8.4.0. Workarounds: Limit the number of sequential optional groups in route patterns. Avoid passing user-controlled input as route patterns.

Traefik (pronounced traffic) is a modern HTTP reverse proxy and load balancer that assists in deploying microservices. There is a potential vulnerability in Traefik managing HTTP/2 connections. A closing HTTP/2 server connection could hang forever because of a subsequent fatal error. This failure mode could be exploited to cause a denial of service. There has been a patch released in versions 2.8.8 and 2.9.0-rc5. There are currently no known workarounds.

In Free5gc v3.0.5, the AMF breaks due to malformed NAS messages.

An issue was discovered in Open-SAE-J1939 thru commit b6caf884df46435e539b1ecbf92b6c29b345bdfe (2025-11-30) in SAE_J1939_Read_Binary_Data_Transfer_DM16 causing a denial of service via crafted CAN frame on the J1939 bus.

libexpat through 2.5.0 allows a denial of service (resource consumption) because many full reparsings are required in the case of a large token for which multiple buffer fills are needed.

dparse is a parser for Python dependency files. dparse in versions before 0.5.2 contain a regular expression that is vulnerable to a Regular Expression Denial of Service. All the users parsing index server URLs with dparse are impacted by this vulnerability. A patch has been applied in version `0.5.2`, all the users are advised to upgrade to `0.5.2` as soon as possible. Users unable to upgrade should avoid passing index server URLs in the source file to be parsed.

cmark-gfm is GitHub's fork of cmark, a CommonMark parsing and rendering library and program in C. In versions prior to 0.29.0.gfm.6 a polynomial time complexity issue in cmark-gfm's autolink extension may lead to unbounded resource exhaustion and subsequent denial of service. Users may verify the patch by running `python3 -c 'print("![l"* 100000 + "\n")' | ./cmark-gfm -e autolink`, which will resource exhaust on unpatched cmark-gfm but render correctly on patched cmark-gfm. This vulnerability has been patched in 0.29.0.gfm.6. Users are advised to upgrade. Users unable to upgrade should disable the use of the autolink extension.

zrok is software for sharing web services, files, and network resources. Prior to version 2.0.1, endpoints.GetSessionCookie parses an attacker-supplied cookie chunk count and calls make([]string, count) with no upper bound before any token validation occurs. The function is reached on every request to an OAuth-protected proxy share, allowing an unauthenticated remote attacker to trigger gigabyte-scale heap allocations per request, leading to process-level OOM termination or repeated goroutine panics. Both publicProxy and dynamicProxy are affected. Version 2.0.1 patches the issue.

Pillow is a Python imaging library. Versions 10.3.0 through 12.1.1 did not limit the amount of GZIP-compressed data read when decoding a FITS image, making them vulnerable to decompression bomb attacks. A specially crafted FITS file could cause unbounded memory consumption, leading to denial of service (OOM crash or severe performance degradation). If users are unable to immediately upgrade, they should only open specific image formats, excluding FITS, as a workaround.

An issue has been discovered in GitLab CE/EE affecting all versions starting from 14.3 before 15.6.7, all versions starting from 15.7 before 15.7.6, all versions starting from 15.8 before 15.8.1. An attacker may upload a crafted CI job artifact zip file in a project that uses dynamic child pipelines and make a sidekiq job allocate a lot of memory. In GitLab instances where Sidekiq is memory-limited, this may cause Denial of Service.