Yamux is a stream multiplexer over reliable, ordered connections such as TCP/IP. Prior to 0.13.10, the Rust implementation of Yamux can panic when processing a crafted inbound Data frame that sets SYN and uses a body length greater than DEFAULT_CREDIT (e.g. 262145). On the first packet of a new inbound stream, stream state is created and a receiver is queued before oversized-body validation completes. When validation fails, the temporary stream is dropped and cleanup may call remove(...).expect("stream not found"), triggering a panic in the connection state machine. This is remotely reachable over a normal Yamux session and does not require authentication. This vulnerability is fixed in 0.13.10.

libp2p-rust is the official rust language Implementation of the libp2p networking stack. In versions prior to 0.49.3, the Gossipsub implementation accepts attacker-controlled PRUNE backoff values and may perform unchecked time arithmetic when storing backoff state. A specially crafted PRUNE control message with an extremely large backoff (e.g. u64::MAX) can lead to Duration/Instant overflow during backoff update logic, triggering a panic in the networking state machine. This is remotely reachable over a normal libp2p connection and does not require authentication. Any application exposing a libp2p Gossipsub listener and using the affected backoff-handling path can be crashed by a network attacker that can reach the service port. The attack can be repeated by reconnecting and replaying the crafted control message. This issue has been fixed in version 0.49.3.

Yamux is a stream multiplexer over reliable, ordered connections such as TCP/IP. From 0.13.0 to before 0.13.9, a specially crafted WindowUpdate can cause arithmetic overflow in send-window accounting, which triggers a panic in the connection state machine. This is remotely reachable over a normal network connection and does not require authentication. This vulnerability is fixed in 0.13.9.

js-libp2p is the official javascript Implementation of libp2p networking stack. Versions older than `v0.38.0` of js-libp2p are vulnerable to targeted resource exhaustion attacks. These attacks target libp2p’s connection, stream, peer, and memory management. An attacker can cause the allocation of large amounts of memory, ultimately leading to the process getting killed by the host’s operating system. While a connection manager tasked with keeping the number of connections within manageable limits has been part of js-libp2p, this component was designed to handle the regular churn of peers, not a targeted resource exhaustion attack. Users are advised to update their js-libp2p dependency to `v0.38.0` or greater. There are no known workarounds for this vulnerability.

An issue was discovered in the multihash crate before 0.11.3 for Rust. The from_slice parsing code can panic via unsanitized data from a network server.

libp2p-rust is the official rust language Implementation of the libp2p networking stack. Prior to 0.17.1, libp2p-rendezvous server has no limit on how many namespaces a single peer can register. A malicious peer can just keep registering unique namespaces in a loop and the server happily accepts every single one allocating memory for each registration with no pushback. Keep doing this long enough (or with multiple sybil peers) and the server process gets OOM killed. This vulnerability is fixed in 0.17.1.

go-libp2p is the offical libp2p implementation in the Go programming language. Version `0.18.0` and older of go-libp2p are vulnerable to targeted resource exhaustion attacks. These attacks target libp2p’s connection, stream, peer, and memory management. An attacker can cause the allocation of large amounts of memory, ultimately leading to the process getting killed by the host’s operating system. While a connection manager tasked with keeping the number of connections within manageable limits has been part of go-libp2p, this component was designed to handle the regular churn of peers, not a targeted resource exhaustion attack. Users are advised to upgrade their version of go-libp2p to version `0.18.1` or newer. Users unable to upgrade may consult the denial of service (dos) mitigation page for more information on how to incorporate mitigation strategies, monitor your application, and respond to attacks.

libp2p-rust is the official rust language Implementation of the libp2p networking stack. In versions prior to 0.45.1 an attacker node can cause a victim node to allocate a large number of small memory chunks, which can ultimately lead to the victim’s process running out of memory and thus getting killed by its operating system. When executed continuously, this can lead to a denial of service attack, especially relevant on a larger scale when run against more than one node of a libp2p based network. Users are advised to upgrade to `libp2p` `v0.45.1` or above. Users unable to upgrade should reference the DoS Mitigation page for more information on how to incorporate mitigation strategies, monitor their application, and respond to attacks: https://docs.libp2p.io/reference/dos-mitigation/.

Boxo, formerly known as go-libipfs, is a library for building IPFS applications and implementations. In versions 0.4.0 and 0.5.0, if an attacker is able allocate arbitrary many bytes in the Bitswap server, those allocations are lasting even if the connection is closed. This affects users accepting untrusted connections with the Bitswap server and also affects users using the old API stubs at `github.com/ipfs/go-libipfs/bitswap` because users then transitively import `github.com/ipfs/go-libipfs/bitswap/server`. Boxo versions 0.6.0 and 0.4.1 contain a patch for this issue. As a workaround, those who are using the stub object at `github.com/ipfs/go-libipfs/bitswap` not taking advantage of the features provided by the server can refactor their code to use the new split API that will allow them to run in a client only mode: `github.com/ipfs/go-libipfs/bitswap/client`.

go-unixfs is an implementation of a unix-like filesystem on top of an ipld merkledag. Trying to read malformed HAMT sharded directories can cause panics and virtual memory leaks. If you are reading untrusted user input, an attacker can then trigger a panic. This is caused by bogus `fanout` parameter in the HAMT directory nodes. Users are advised to upgrade to version 0.4.3 to resolve this issue. Users unable to upgrade should not feed untrusted user data to the decoding functions.

github.com/ipfs/go-unixfsnode is an ADL IPLD prime node that wraps go-codec-dagpb's implementation of protobuf to enable pathing. In versions priot to 1.5.2 trying to read malformed HAMT sharded directories can cause panics and virtual memory leaks. If you are reading untrusted user input, an attacker can then trigger a panic. This is caused by bogus fanout parameter in the HAMT directory nodes. Users are advised to upgrade. There are no known workarounds for this vulnerability.

go-bitfield is a simple bitfield package for the go language aiming to be more performant that the standard library. When feeding untrusted user input into the size parameter of `NewBitfield` and `FromBytes` functions, an attacker can trigger `panic`s. This happen when the `size` is a not a multiple of `8` or is negative. There were already a note in the `NewBitfield` documentation, however known users of this package are subject to this issue. Users are advised to upgrade. Users unable to upgrade should ensure that `size` is a multiple of 8 before calling `NewBitfield` or `FromBytes`.

go-ipld-prime is an implementation of the InterPlanetary Linked Data (IPLD) spec interfaces, a batteries-included codec implementations of IPLD for CBOR and JSON, and tooling for basic operations on IPLD objects. Encoding data which contains a Bytes kind Node will pass a Bytes token to the JSON encoder which will panic as it doesn't expect to receive Bytes tokens. Such an encode should be treated as an error, as plain JSON should not be able to encode Bytes. This only impacts uses of the `json` codec. `dag-json` is not impacted. Use of `json` as a decoder is not impacted. This issue is fixed in v0.19.0. As a workaround, one may prefer the `dag-json` codec, which has the ability to encode bytes.

go-merkledag implements the 'DAGService' interface and adds two ipld node types, Protobuf and Raw for the ipfs project. A `ProtoNode` may be modified in such a way as to cause various encode errors which will trigger a panic on common method calls that don't allow for error returns. A `ProtoNode` should only be able to encode to valid DAG-PB, attempting to encode invalid DAG-PB forms will result in an error from the codec. Manipulation of an existing (newly created or decoded) `ProtoNode` using the modifier methods did not account for certain states that would place the `ProtoNode` into an unencodeable form. Due to conformance with the [`github.com/ipfs/go-block-format#Block`](https://pkg.go.dev/github.com/ipfs/go-block-format#Block) and [`github.com/ipfs/go-ipld-format#Node`](https://pkg.go.dev/github.com/ipfs/go-ipld-format#Node) interfaces, certain methods, which internally require a re-encode if state has changed, will panic due to the inability to return an error. This issue has been addressed across a number of pull requests. Users are advised to upgrade to version 0.8.1 for a complete set of fixes. Users unable to upgrade may attempt to mitigate this issue by sanitising inputs when allowing user-input to set a new `CidBuilder` on a `ProtoNode` and by sanitising `Tsize` (`Link#Size`) values such that they are a reasonable byte-size for sub-DAGs where derived from user-input.

libp2p is a networking stack and library modularized out of The IPFS Project, and bundled separately for other tools to use. In go-libp2p, by using signed peer records a malicious actor can store an arbitrary amount of data in a remote node’s memory. This memory does not get garbage collected and so the victim can run out of memory and crash. If users of go-libp2p in production are not monitoring memory consumption over time, it could be a silent attack i.e. the attacker could bring down nodes over a period of time (how long depends on the node resources i.e. a go-libp2p node on a virtual server with 4 gb of memory takes about 90 sec to bring down; on a larger server, it might take a bit longer.) This issue was patched in version 0.27.4.

An issue was discovered in IPFS (aka go-ipfs) 0.4.23. An attacker can generate ephemeral identities (Sybils) and leverage the IPFS connection management reputation system to poison other nodes' routing tables, eclipsing the nodes that are the target of the attack from the rest of the network. Later versions, in particular go-ipfs 0.7, mitigate this.

A vulnerability was identified in osrg GoBGP up to 4.3.0. Affected by this issue is the function BMPPeerUpNotification.ParseBody/BMPStatisticsReport.ParseBody of the file pkg/packet/bmp/bmp.go of the component BMP Parser. The manipulation leads to out-of-bounds read. The attack can be initiated remotely. Upgrading to version 4.4.0 can resolve this issue. The identifier of the patch is bc77597d42335c78464bc8e15a471d887bbdf260. Upgrading the affected component is recommended.

WASM3 v0.5.0 was discovered to contain a segmentation fault via the component op_Select_i32_srs in wasm3/source/m3_exec.h.

Calling Buffer.fill() or Buffer.alloc() with some parameters can lead to a hang which could result in a Denial of Service. In order to address this vulnerability, the implementations of Buffer.alloc() and Buffer.fill() were updated so that they zero fill instead of hanging in these cases. All versions of Node.js 6.x (LTS "Boron"), 8.x (LTS "Carbon"), and 9.x are vulnerable. All versions of Node.js 10.x (Current) are NOT vulnerable.

A security vulnerability has been detected in LB-LINK BL-WR9000 2.4.9. The impacted element is the function sub_44D844 of the file /goform/get_hidessid_cfg. The manipulation leads to buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability classified as critical has been found in Tenda TX3 16.03.13.11_multi. This affects an unknown part of the file /goform/setMacFilterCfg. The manipulation of the argument deviceList leads to buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used.

On Patlite NH-FB series devices through 1.46, remote attackers can cause a denial of service by omitting the query string. NOTE: the vendor's perspective is that "omitting the query string does not cause a denial of service and the indicated event can not be reproduced.

A weakness has been identified in libssh up to 0.11.3. The impacted element is the function sftp_extensions_get_name/sftp_extensions_get_data of the file src/sftp.c of the component SFTP Extension Name Handler. Executing a manipulation of the argument idx can lead to out-of-bounds read. The attack may be performed from remote. Upgrading to version 0.11.4 and 0.12.0 is sufficient to resolve this issue. This patch is called 855a0853ad3abd4a6cd85ce06fce6d8d4c7a0b60. You should upgrade the affected component.

A vulnerability has been found in Tenda TX3 16.03.13.11_multi and classified as critical. Affected by this vulnerability is an unknown functionality of the file /goform/setPptpUserList. The manipulation of the argument list leads to buffer overflow. The attack can be launched remotely. The exploit has been disclosed to the public and may be used.

A CWE-119: Improper Restriction of Operations within the Bounds of a Memory Buffer vulnerability exists that could cause denial of service when parsing the URL. Affected Products: X80 advanced RTU Communication Module (BMENOR2200H) (V1.0), OPC UA Modicon Communication Module (BMENUA0100) (V1.10 and prior)

A vulnerability was found in Exim and classified as problematic. This issue affects some unknown processing of the component Regex Handler. The manipulation leads to use after free. The name of the patch is 4e9ed49f8f12eb331b29bd5b6dc3693c520fddc2. It is recommended to apply a patch to fix this issue. The identifier VDB-211073 was assigned to this vulnerability.

A CWE-119 Buffer Errors vulnerability exists in Modicon M580 CPU - BMEP582040, all versions before V2.90, and Modicon Ethernet Module BMENOC0301, all versions before V2.16, which could cause denial of service on the FTP service of the controller or the Ethernet BMENOC module when it receives a FTP CWD command with a data length greater than 1020 bytes. A power cycle is then needed to reactivate the FTP service.

A vulnerability has been identified in EN100 Ethernet module DNP3 IP variant (All versions), EN100 Ethernet module IEC 104 variant (All versions), EN100 Ethernet module IEC 61850 variant (All versions < V4.40), EN100 Ethernet module Modbus TCP variant (All versions), EN100 Ethernet module PROFINET IO variant (All versions). Affected applications contains a memory corruption vulnerability while parsing specially crafted HTTP packets to /txtrace endpoint manupulating a specific argument. This could allow an attacker to crash the affected application leading to a denial of service condition

A weakness has been identified in Shiguangwu sgwbox N3 2.0.25. Affected by this vulnerability is an unknown functionality of the file /usr/sbin/http_eshell_server of the component WIREDCFGGET Interface. Executing manipulation of the argument params can lead to buffer overflow. The attack may be launched remotely. The exploit has been made available to the public and could be exploited. The vendor was contacted early about this disclosure but did not respond in any way.

Incorrect boundary conditions in the Graphics: Text component. This vulnerability was fixed in Firefox 149, Firefox ESR 140.9, Thunderbird 149, and Thunderbird 140.9.

Failure to properly bounds-check a buffer used for processing DHCP options allows a malicious server (or an entity masquerading as a server) to cause a buffer overflow (and resulting crash) in dhclient by sending a response containing a specially constructed options section. Affects ISC DHCP versions 4.1.0 -> 4.1-ESV-R15, 4.2.0 -> 4.2.8, 4.3.0 -> 4.3.6, 4.4.0

Kamailio is an open source implementation of a SIP Signaling Server. Prior to 6.1.1, 6.0.6, and 5.8.8, an out-of-bounds access in the core of Kamailio (formerly OpenSER and SER) allows remote attackers to cause a denial of service (process crash) via a specially crafted data packet sent over TCP. The issue impacts Kamailio instances having TCP or TLS listeners. This vulnerability is fixed in 5.1.1, 6.0.6, and 5.8.8.

An exploitable denial-of-service vulnerability exists in the XML_GetRawEncJpg Wi-Fi command of the NT9665X Chipset firmware, running on the Anker Roav A1 Dashcam, version RoavA1SWV1.9. A specially crafted packet can cause an invalid memory dereference, resulting in a device reboot.

Buffer overflow vulnerabilities exist in FRRouting through 8.1.0 due to wrong checks on the input packet length in isisd/isis_tlvs.c.

A malformed packet causes a stack overflow in the Ember ZNet stack. This causes an assert which leads to a reset, immediately clearing the error.

A vulnerability classified as critical was found in code-projects Vehicle Parking Management System 1.0. This vulnerability affects the function login of the component Authentication. The manipulation of the argument username leads to stack-based buffer overflow. An attack has to be approached locally. The exploit has been disclosed to the public and may be used.

A buffer overflow vulnerability in Fortinet FortiOS 6.0.0 through 6.0.4, 5.6.0 through 5.6.7, 5.4 and earlier versions and FortiProxy 2.0.0, 1.2.8 and earlier versions under SSL VPN web portal allows a non-authenticated attacker to perform a Denial-of-service attack via special craft message payloads.

Improper Restriction of Operations within the Bounds of a Memory Buffer (CWE-119) in the OpenSSL-based session module in AxxonSoft Axxon One (C-Werk) 2.0.6 and earlier on Windows allows a remote attacker under high load conditions to cause application crashes or unpredictable behavior via triggering memory reallocation errors when handling expired session keys.

Sante PACS Server URL path Memory Corruption Denial-of-Service Vulnerability. This vulnerability allows remote attackers to create a denial-of-service condition on affected installations of Sante PACS Server. Authentication is not required to exploit this vulnerability. The specific flaw exists within the parsing of URLs in the web server module. The issue results from the lack of proper validation of user-supplied data, which can result in a memory corruption condition. An attacker can leverage this vulnerability to create a denial-of-service condition on the system. Was ZDI-CAN-25318.

Sante PACS Server DCM File Parsing Memory Corruption Denial-of-Service Vulnerability. This vulnerability allows remote attackers to create a denial-of-service condition on affected installations of Sante PACS Server. Authentication is not required to exploit this vulnerability. The specific flaw exists within the parsing of DCM files. The issue results from the lack of proper validation of user-supplied data, which can result in a memory corruption condition. An attacker can leverage this vulnerability to create a denial-of-service condition on the system. Was ZDI-CAN-25302.

Sante PACS Server DCM File Parsing Memory Corruption Denial-of-Service Vulnerability. This vulnerability allows remote attackers to create a denial-of-service condition on affected installations of Sante PACS Server. Authentication is not required to exploit this vulnerability. The specific flaw exists within the parsing of DCM files. The issue results from the lack of proper validation of user-supplied data, which can result in a memory corruption condition. An attacker can leverage this vulnerability to create a denial-of-service condition on the system. Was ZDI-CAN-25303.

FreyrSCADA/IEC-60870-5-104 server v21.06.008 allows remote attackers to cause a denial of service by sending specific message sequences.

Improper buffer restrictions for some Intel(R) PROSet/Wireless WiFi products may allow an unauthenticated user to potentially enable denial of service via network access.

Vulnerability of improper memory address protection in the HUKS module Impact: Successful exploitation of this vulnerability may affect availability.

A vulnerability in dynamic access policies (DAP) functionality of Cisco Adaptive Security Appliance (ASA) Software and Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause an affected device to reload, resulting in a denial of service (DoS) condition. This vulnerability is due to improper processing of HostScan data received from the Posture (HostScan) module. An attacker could exploit this vulnerability by sending crafted HostScan data to an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition. https://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-asa-ftd-dap-dos-GhYZBxDU ["https://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-asa-ftd-dap-dos-GhYZBxDU"] This advisory is part of the November 2022 release of the Cisco ASA, FTD, and FMC Security Advisory Bundled publication.

A drm driver have oob problem, could cause the system crash or EOPProduct: AndroidVersions: Android SoCAndroid ID: A-233124709

Improper Input Validation vulnerability in Hitachi Energy MicroSCADA X SYS600 while reading a specific configuration file causes a buffer-overflow that causes a failure to start the SYS600. The configuration file can only be accessed by an administrator access. This issue affects: Hitachi Energy MicroSCADA X SYS600 version 10 to version 10.3.1. cpe:2.3:a:hitachienergy:microscada_x_sys600:10:*:*:*:*:*:*:* cpe:2.3:a:hitachienergy:microscada_x_sys600:10.1:*:*:*:*:*:*:* cpe:2.3:a:hitachienergy:microscada_x_sys600:10.1.1:*:*:*:*:*:*:* cpe:2.3:a:hitachienergy:microscada_x_sys600:10.2:*:*:*:*:*:*:* cpe:2.3:a:hitachienergy:microscada_x_sys600:10.2.1:*:*:*:*:*:*:* cpe:2.3:a:hitachienergy:microscada_x_sys600:10.3:*:*:*:*:*:*:* cpe:2.3:a:hitachienergy:microscada_x_sys600:10.3.1:*:*:*:*:*:*:*

The issue was addressed with improved memory handling. This issue is fixed in Safari 17.6, iOS 17.6 and iPadOS 17.6, macOS Sonoma 14.6, tvOS 17.6, visionOS 1.3, watchOS 10.6. Processing web content may lead to a denial-of-service.

An Untrusted Pointer Dereference was discovered in function mrb_vm_exec in mruby before 3.1.0-rc. The vulnerability causes a segmentation fault and application crash.

An untrusted pointer dereference in mrb_vm_exec() of mruby v3.0.0 can lead to a segmentation fault or application crash.