libp2p-rust is the official rust language Implementation of the libp2p networking stack. In versions prior to 0.49.3, the Gossipsub implementation accepts attacker-controlled PRUNE backoff values and may perform unchecked time arithmetic when storing backoff state. A specially crafted PRUNE control message with an extremely large backoff (e.g. u64::MAX) can lead to Duration/Instant overflow during backoff update logic, triggering a panic in the networking state machine. This is remotely reachable over a normal libp2p connection and does not require authentication. Any application exposing a libp2p Gossipsub listener and using the affected backoff-handling path can be crashed by a network attacker that can reach the service port. The attack can be repeated by reconnecting and replaying the crafted control message. This issue has been fixed in version 0.49.3.

Yamux is a stream multiplexer over reliable, ordered connections such as TCP/IP. Prior to 0.13.10, the Rust implementation of Yamux can panic when processing a crafted inbound Data frame that sets SYN and uses a body length greater than DEFAULT_CREDIT (e.g. 262145). On the first packet of a new inbound stream, stream state is created and a receiver is queued before oversized-body validation completes. When validation fails, the temporary stream is dropped and cleanup may call remove(...).expect("stream not found"), triggering a panic in the connection state machine. This is remotely reachable over a normal Yamux session and does not require authentication. This vulnerability is fixed in 0.13.10.

The dag-pb codec can panic when decoding invalid blocks.

js-libp2p is the official javascript Implementation of libp2p networking stack. Versions older than `v0.38.0` of js-libp2p are vulnerable to targeted resource exhaustion attacks. These attacks target libp2p’s connection, stream, peer, and memory management. An attacker can cause the allocation of large amounts of memory, ultimately leading to the process getting killed by the host’s operating system. While a connection manager tasked with keeping the number of connections within manageable limits has been part of js-libp2p, this component was designed to handle the regular churn of peers, not a targeted resource exhaustion attack. Users are advised to update their js-libp2p dependency to `v0.38.0` or greater. There are no known workarounds for this vulnerability.

An issue was discovered in the multihash crate before 0.11.3 for Rust. The from_slice parsing code can panic via unsanitized data from a network server.

libp2p-rust is the official rust language Implementation of the libp2p networking stack. Prior to 0.17.1, libp2p-rendezvous server has no limit on how many namespaces a single peer can register. A malicious peer can just keep registering unique namespaces in a loop and the server happily accepts every single one allocating memory for each registration with no pushback. Keep doing this long enough (or with multiple sybil peers) and the server process gets OOM killed. This vulnerability is fixed in 0.17.1.

go-libp2p is the offical libp2p implementation in the Go programming language. Version `0.18.0` and older of go-libp2p are vulnerable to targeted resource exhaustion attacks. These attacks target libp2p’s connection, stream, peer, and memory management. An attacker can cause the allocation of large amounts of memory, ultimately leading to the process getting killed by the host’s operating system. While a connection manager tasked with keeping the number of connections within manageable limits has been part of go-libp2p, this component was designed to handle the regular churn of peers, not a targeted resource exhaustion attack. Users are advised to upgrade their version of go-libp2p to version `0.18.1` or newer. Users unable to upgrade may consult the denial of service (dos) mitigation page for more information on how to incorporate mitigation strategies, monitor your application, and respond to attacks.

libp2p-rust is the official rust language Implementation of the libp2p networking stack. In versions prior to 0.45.1 an attacker node can cause a victim node to allocate a large number of small memory chunks, which can ultimately lead to the victim’s process running out of memory and thus getting killed by its operating system. When executed continuously, this can lead to a denial of service attack, especially relevant on a larger scale when run against more than one node of a libp2p based network. Users are advised to upgrade to `libp2p` `v0.45.1` or above. Users unable to upgrade should reference the DoS Mitigation page for more information on how to incorporate mitigation strategies, monitor their application, and respond to attacks: https://docs.libp2p.io/reference/dos-mitigation/.

Yamux is a stream multiplexer over reliable, ordered connections such as TCP/IP. The Rust implementation of the Yamux stream multiplexer uses a vector for pending frames. This vector is not bounded in length. Every time the Yamux protocol requires sending of a new frame, this frame gets appended to this vector. This can be remotely triggered in a number of ways, for example by: 1. Opening a new libp2p Identify stream. This causes the node to send its Identify message. Of course, every other protocol that causes the sending of data also works. The larger the response, the more data is enqueued. 2. Sending a Yamux Ping frame. This causes a Pong frame to be enqueued. Under normal circumstances, this queue of pending frames would be drained once they’re sent out over the network. However, the attacker can use TCP’s receive window mechanism to prevent the victim from sending out any data: By not reading from the TCP connection, the receive window will never be increased, and the victim won’t be able to send out any new data (this is how TCP implements backpressure). Once this happens, Yamux’s queue of pending frames will start growing indefinitely. The queue will only be drained once the underlying TCP connection is closed. An attacker can cause a remote node to run out of memory, which will result in the corresponding process getting terminated by the operating system.

Boxo, formerly known as go-libipfs, is a library for building IPFS applications and implementations. In versions 0.4.0 and 0.5.0, if an attacker is able allocate arbitrary many bytes in the Bitswap server, those allocations are lasting even if the connection is closed. This affects users accepting untrusted connections with the Bitswap server and also affects users using the old API stubs at `github.com/ipfs/go-libipfs/bitswap` because users then transitively import `github.com/ipfs/go-libipfs/bitswap/server`. Boxo versions 0.6.0 and 0.4.1 contain a patch for this issue. As a workaround, those who are using the stub object at `github.com/ipfs/go-libipfs/bitswap` not taking advantage of the features provided by the server can refactor their code to use the new split API that will allow them to run in a client only mode: `github.com/ipfs/go-libipfs/bitswap/client`.

go-unixfs is an implementation of a unix-like filesystem on top of an ipld merkledag. Trying to read malformed HAMT sharded directories can cause panics and virtual memory leaks. If you are reading untrusted user input, an attacker can then trigger a panic. This is caused by bogus `fanout` parameter in the HAMT directory nodes. Users are advised to upgrade to version 0.4.3 to resolve this issue. Users unable to upgrade should not feed untrusted user data to the decoding functions.

github.com/ipfs/go-unixfsnode is an ADL IPLD prime node that wraps go-codec-dagpb's implementation of protobuf to enable pathing. In versions priot to 1.5.2 trying to read malformed HAMT sharded directories can cause panics and virtual memory leaks. If you are reading untrusted user input, an attacker can then trigger a panic. This is caused by bogus fanout parameter in the HAMT directory nodes. Users are advised to upgrade. There are no known workarounds for this vulnerability.

go-bitfield is a simple bitfield package for the go language aiming to be more performant that the standard library. When feeding untrusted user input into the size parameter of `NewBitfield` and `FromBytes` functions, an attacker can trigger `panic`s. This happen when the `size` is a not a multiple of `8` or is negative. There were already a note in the `NewBitfield` documentation, however known users of this package are subject to this issue. Users are advised to upgrade. Users unable to upgrade should ensure that `size` is a multiple of 8 before calling `NewBitfield` or `FromBytes`.

go-ipld-prime is an implementation of the InterPlanetary Linked Data (IPLD) spec interfaces, a batteries-included codec implementations of IPLD for CBOR and JSON, and tooling for basic operations on IPLD objects. Encoding data which contains a Bytes kind Node will pass a Bytes token to the JSON encoder which will panic as it doesn't expect to receive Bytes tokens. Such an encode should be treated as an error, as plain JSON should not be able to encode Bytes. This only impacts uses of the `json` codec. `dag-json` is not impacted. Use of `json` as a decoder is not impacted. This issue is fixed in v0.19.0. As a workaround, one may prefer the `dag-json` codec, which has the ability to encode bytes.

go-merkledag implements the 'DAGService' interface and adds two ipld node types, Protobuf and Raw for the ipfs project. A `ProtoNode` may be modified in such a way as to cause various encode errors which will trigger a panic on common method calls that don't allow for error returns. A `ProtoNode` should only be able to encode to valid DAG-PB, attempting to encode invalid DAG-PB forms will result in an error from the codec. Manipulation of an existing (newly created or decoded) `ProtoNode` using the modifier methods did not account for certain states that would place the `ProtoNode` into an unencodeable form. Due to conformance with the [`github.com/ipfs/go-block-format#Block`](https://pkg.go.dev/github.com/ipfs/go-block-format#Block) and [`github.com/ipfs/go-ipld-format#Node`](https://pkg.go.dev/github.com/ipfs/go-ipld-format#Node) interfaces, certain methods, which internally require a re-encode if state has changed, will panic due to the inability to return an error. This issue has been addressed across a number of pull requests. Users are advised to upgrade to version 0.8.1 for a complete set of fixes. Users unable to upgrade may attempt to mitigate this issue by sanitising inputs when allowing user-input to set a new `CidBuilder` on a `ProtoNode` and by sanitising `Tsize` (`Link#Size`) values such that they are a reasonable byte-size for sub-DAGs where derived from user-input.

go-libp2p is the Go implementation of the libp2p Networking Stack. Prior to versions 0.27.8, 0.28.2, and 0.29.1 malicious peer can use large RSA keys to run a resource exhaustion attack & force a node to spend time doing signature verification of the large key. This vulnerability is present in the core/crypto module of go-libp2p and can occur during the Noise handshake and the libp2p x509 extension verification step. To prevent this attack, go-libp2p versions 0.27.8, 0.28.2, and 0.29.1 restrict RSA keys to <= 8192 bits. To protect one's application, it is necessary to update to these patch releases and to use the updated Go compiler in 1.20.7 or 1.19.12. There are no known workarounds for this issue.

libp2p is a networking stack and library modularized out of The IPFS Project, and bundled separately for other tools to use. In go-libp2p, by using signed peer records a malicious actor can store an arbitrary amount of data in a remote node’s memory. This memory does not get garbage collected and so the victim can run out of memory and crash. If users of go-libp2p in production are not monitoring memory consumption over time, it could be a silent attack i.e. the attacker could bring down nodes over a period of time (how long depends on the node resources i.e. a go-libp2p node on a virtual server with 4 gb of memory takes about 90 sec to bring down; on a larger server, it might take a bit longer.) This issue was patched in version 0.27.4.

An issue was discovered in IPFS (aka go-ipfs) 0.4.23. An attacker can generate ephemeral identities (Sybils) and leverage the IPFS connection management reputation system to poison other nodes' routing tables, eclipsing the nodes that are the target of the attack from the rest of the network. Later versions, in particular go-ipfs 0.7, mitigate this.

libp2p-rust is the official rust language Implementation of the libp2p networking stack. Prior to version 0.49.4, the Rust libp2p Gossipsub implementation contains a remotely reachable panic in backoff expiry handling. After a peer sends a crafted PRUNE control message with an attacker-controlled, near-maximum backoff value, the value is accepted and stored as an Instant near the representable upper bound. On a later heartbeat, the implementation performs unchecked Instant + Duration arithmetic (backoff_time + slack), which can overflow and panic with: overflow when adding duration to instant. This issue is reachable from any Gossipsub peer over normal TCP + Noise + mplex/yamux connectivity and requires no further authentication beyond becoming a protocol peer. This issue has been patched in version 0.49.4.

Incorrect boundary conditions, integer overflow in the Graphics component. This vulnerability was fixed in Firefox 149, Firefox ESR 115.34, Firefox ESR 140.9, Thunderbird 149, and Thunderbird 140.9.

Little CMS (lcms2) through 2.18 has an integer overflow in CubeSize in cmslut.c because the overflow check is performed after the multiplication.

PJSIP is a free and open source multimedia communication library written in C. In 2.16 and earlier, there is an integer overflow in media stream buffer size calculation when processing SDP with asymmetric ptime configuration. The overflow may result in an undersized buffer allocation, which can lead to unexpected application termination or memory corruption This vulnerability is fixed in 2.17.

Integer Overflow or Wraparound vulnerability in Apache ActiveMQ, Apache ActiveMQ All, Apache ActiveMQ MQTT. The fix for "CVE-2025-66168: MQTT control packet remaining length field is not properly validated" was only applied to 5.19.2 (and future 5.19.x) releases but was missed for all 6.0.0+ versions. This issue affects Apache ActiveMQ: from 6.0.0 before 6.2.4; Apache ActiveMQ All: from 6.0.0 before 6.2.4; Apache ActiveMQ MQTT: from 6.0.0 before 6.2.4. Users are recommended to upgrade to version 6.2.4 or a 5.19.x version starting with 5.19.2 or later (currently latest is 5.19.5), which fixes the issue.

An integer overflow exists in Mapbox's closed source gl-native library prior to version 10.6.1, which is bundled with multiple Mapbox products including open source libraries. The overflow is caused by large image height and width values when creating a new Image and allows for out of bounds writes, potentially crashing the Mapbox process.

An issue was discovered in libsndfile 1.2.2 IMA ADPCM codec. The AIFF code path (line 241) was fixed with (sf_count_t) cast, but the WAV code path (line 235) and close path (line 167) were not. When samplesperblock (int) * blocks (int) exceeds INT_MAX, the 32-bit multiplication overflows before being assigned to sf.frames (sf_count_t/int64). With samplesperblock=50000 and blocks=50000, the product 2500000000 overflows to -1794967296. This causes incorrect frame count leading to heap buffer overflow or denial of service. Both values come from the WAV file header and are attacker-controlled. This issue was discovered after an incomplete fix for CVE-2022-33065.

It is possible to crash (panic) an application by providing a corrupted data to be read. This issue affects Rust applications using Apache Avro Rust SDK prior to 0.14.0 (previously known as avro-rs). Users should update to apache-avro version 0.14.0 which addresses this issue.

Zserio is a framework for serializing structured data with a compact and efficient way with low overhead. Prior to 2.18.1, in BitStreamReader.h readBytes() / readString(), the setBitPosition() bounds check receives the overflowed value and is completely bypassed. The code then reads len bytes (512 MB) from a buffer that is only a few bytes long, causing a segmentation fault. This vulnerability is fixed in 2.18.1.

TensorFlow is an open source platform for machine learning. The `RaggedRangOp` function takes an argument `limits` that is eventually used to construct a `TensorShape` as an `int64`. If `limits` is a very large float, it can overflow when converted to an `int64`. This triggers an `InvalidArgument` but also throws an abort signal that crashes the program. We have patched the issue in GitHub commit 37cefa91bee4eace55715eeef43720b958a01192. The fix will be included in TensorFlow 2.10.0. We will also cherrypick this commit on TensorFlow 2.9.1, TensorFlow 2.8.1, and TensorFlow 2.7.2, as these are also affected and still in supported range. There are no known workarounds for this issue.

ImageMagick is free and open-source software used for editing and manipulating digital images. In versions below both 7.1.2-19 and 6.9.13-44, the viff encoder contains an integer truncation/wraparound issue on 32-bit builds that could trigger an out of bounds heap write, potentially causing a crash. This issue has been fixed in versions 6.9.13-44 and 7.1.2-19.

TensorFlow is an open source platform for machine learning. When `RangeSize` receives values that do not fit into an `int64_t`, it crashes. We have patched the issue in GitHub commit 37e64539cd29fcfb814c4451152a60f5d107b0f0. The fix will be included in TensorFlow 2.10.0. We will also cherrypick this commit on TensorFlow 2.9.1, TensorFlow 2.8.1, and TensorFlow 2.7.2, as these are also affected and still in supported range. There are no known workarounds for this issue.

OP-TEE is a Trusted Execution Environment (TEE) designed as companion to a non-secure Linux kernel running on Arm; Cortex-A cores using the TrustZone technology. From 3.8.0 to 4.10, in the function emsa_pkcs1_v1_5_encode() in core/drivers/crypto/crypto_api/acipher/rsassa.c, the amount of padding needed, "PS size", is calculated by subtracting the size of the digest and other fields required for the EMA-PKCS1-v1_5 encoding from the size of the modulus of the key. By selecting a small enough modulus, this subtraction can overflow. The padding is added as a string of 0xFF bytes with a call to memset(), and an underflowed integer will cause the memset() call to overwrite until OP-TEE crashes. This only affects platforms registering RSA acceleration.

Integer Overflow or Wraparound vulnerability in MolotovCherry Android-ImageMagick7.This issue affects Android-ImageMagick7: before 7.1.2-11.

UltraJSON is a fast JSON encoder and decoder written in pure C with bindings for Python 3.7+. Versions 5.10 through 5.11.0 are vulnerable to buffer overflow or infinite loop through large indent handling. ujson.dumps() crashes the Python interpreter (segmentation fault) when the product of the indent parameter and the nested depth of the input exceeds INT32_MAX. It can also get stuck in an infinite loop if the indent is a large negative number. Both are caused by an integer overflow/underflow whilst calculating how much memory to reserve for indentation. And both can be used to achieve denial of service. To be vulnerable, a service must call ujson.dump()/ujson.dumps()/ujson.encode() whilst giving untrusted users control over the indent parameter and not restrict that indentation to reasonably small non-negative values. A service may also be vulnerable to the infinite loop if it uses a fixed negative indent. An underflow always occurs for any negative indent when the input data is at least one level nested but, for small negative indents, the underflow is usually accidentally rectified by another overflow. This issue has been fixed in version 5.12.0.

Crypt::Sodium::XS versions through 0.001000 for Perl has potential integer overflows. Combined aead encryption, combined signature creation, and bin2hex functions do not check that output size will be less than SIZE_MAX, which could lead to integer wraparound causing an undersized output buffer. This can cause a crash in bin2hex and encryption algorithms other than aes256gcm. For aes256gcm encryption and signatures, an undersized buffer could lead to buffer overflow. Encountering this issue is unlikely as the message length would need to be very large. For bin2hex the input size would have to be > SIZE_MAX / 2 For aegis encryption the input size would need to be > SIZE_MAX - 32U For other encryption the input size would need to be > SIZE_MAX - 16U For signatures the input size would need to be > SIZE_MAX - 64U

Denial-of-service due to integer overflow in the Graphics: WebGPU component. This vulnerability was fixed in Firefox 150 and Thunderbird 150.

Solana solana_rbpf before 0.2.29 has an addition integer overflow via invalid ELF program headers. elf.rs has a panic via a malformed eBPF program.

Integer Overflow or Wraparound vulnerability in Apache Thrift TFramedTransport Go language implementation This issue affects Apache Thrift: before 0.23.0. Users are recommended to upgrade to version 0.23.0, which fixes the issue.

Vapor is an HTTP web framework for Swift. Users of Vapor prior to version 4.60.3 with FileMiddleware enabled are vulnerable to an integer overflow vulnerability that can crash the application. Version 4.60.3 contains a patch for this issue. As a workaround, disable FileMiddleware and serve via a Content Delivery Network.

On F5 BIG-IP 16.1.x versions prior to 16.1.2.2, 15.1.x versions prior to 15.1.5.1, 14.1.x versions prior to 14.1.4.6, and 13.1.x versions prior to 13.1.5, on platforms with an ePVA and the pva.fwdaccel BigDB variable enabled, undisclosed requests to a virtual server with a FastL4 profile that has ePVA acceleration enabled can cause the Traffic Management Microkernel (TMM) process to terminate. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated

A malicious client which is allowed to send very large amounts of traffic (billions of packets) to a DHCP server can eventually overflow a 32-bit reference counter, potentially causing dhcpd to crash. Affects ISC DHCP 4.1.0 -> 4.1-ESV-R15, 4.2.0 -> 4.2.8, 4.3.0 -> 4.3.6, 4.4.0.

Integer overflow in GameMaker IDE below 2024.14.0 version can lead to can lead to application crashes through denial-of-service attacks (DoS). GameMaker users who use the network_create_server() function in their projects  are urged to update and recompile immediately.

FISCO-BCOS release-3.0.0-rc2 was discovered to contain an issue where a malicious node, via an invalid proposal with an invalid header, will cause normal nodes to stop producing new blocks and processing new clients' requests.

A flaw was found in Blender 3.3.0. An interger overflow in source/blender/blendthumb/src/blendthumb_extract.cc may lead to program crash or memory corruption.

FISCO-BCOS release-3.0.0-rc2 was discovered to contain an issue where a malicious node can trigger an integer overflow and cause a Denial of Service (DoS) via an unusually large viewchange message packet.

An integer overflow vulnerability in the HTTP chunked transfer encoding parser in tinyproxy up to and including version 1.11.3 allows an unauthenticated remote attacker to cause a denial of service (DoS). The issue occurs because chunk size values are parsed using strtol() without properly validating overflow conditions (e.g., errno == ERANGE). A crafted chunk size such as 0x7fffffffffffffff (LONG_MAX) bypasses the existing validation check (chunklen < 0), leading to a signed integer overflow during arithmetic operations (chunklen + 2). This results in incorrect size calculations, causing the proxy to attempt reading an extremely large amount of request-body data and holding worker connections open indefinitely. An attacker can exploit this behavior to exhaust all available worker slots, preventing new connections from being accepted and causing complete service unavailability. Upstream addressed this issue in commit bb7edc4; however, the latest stable release (1.11.3) remains affected at the time of publication.

A flaw was found in Corosync. An integer overflow vulnerability in Corosync's join message sanity validation allows a remote, unauthenticated attacker to send crafted User Datagram Protocol (UDP) packets. This can cause the service to crash, leading to a denial of service. This vulnerability specifically affects Corosync deployments configured to use totemudp/totemudpu mode.

A program using swift-nio-http2 is vulnerable to a denial of service attack, caused by a network peer sending a specially crafted HPACK-encoded header block. This attack affects all swift-nio-http2 versions from 1.0.0 to 1.19.1. There are a number of implementation errors in the parsing of HPACK-encoded header blocks that allow maliciously crafted HPACK header blocks to cause crashes in processes using swift-nio-http2. Each of these crashes is triggered instead of an integer overflow. A malicious HPACK header block could be sent on any of the HPACK-carrying frames in a HTTP/2 connection (HEADERS and PUSH_PROMISE), at any position. Sending a HPACK header block does not require any special permission, so any HTTP/2 connection peer may send one. For clients, this means any server to which they connect may launch this attack. For servers, anyone they allow to connect to them may launch such an attack. The attack is low-effort: it takes very little resources to send an appropriately crafted field block. The impact on availability is high: receiving a frame carrying this field block immediately crashes the server, dropping all in-flight connections and causing the service to need to restart. It is straightforward for an attacker to repeatedly send appropriately crafted field blocks, so attackers require very few resources to achieve a substantial denial of service. The attack does not have any confidentiality or integrity risks in and of itself: swift-nio-http2 is parsing the field block in memory-safe code and the crash is triggered instead of an integer overflow. However, sudden process crashes can lead to violations of invariants in services, so it is possible that this attack can be used to trigger an error condition that has confidentiality or integrity risks. The risk can be mitigated if untrusted peers can be prevented from communicating with the service. This mitigation is not available to many services. The issue is fixed by rewriting the parsing code to correctly handle all conditions in the function. The principal issue was found by automated fuzzing by oss-fuzz, but several associated bugs in the same code were found by code audit and fixed at the same time

In Expat (aka libexpat) before 2.4.5, there is an integer overflow in copyString.

yajl-ruby is a C binding to the YAJL JSON parsing and generation library. The 1.x branch and the 2.x branch of `yajl` contain an integer overflow which leads to subsequent heap memory corruption when dealing with large (~2GB) inputs. The reallocation logic at `yajl_buf.c#L64` may result in the `need` 32bit integer wrapping to 0 when `need` approaches a value of 0x80000000 (i.e. ~2GB of data), which results in a reallocation of buf->alloc into a small heap chunk. These integers are declared as `size_t` in the 2.x branch of `yajl`, which practically prevents the issue from triggering on 64bit platforms, however this does not preclude this issue triggering on 32bit builds on which `size_t` is a 32bit integer. Subsequent population of this under-allocated heap chunk is based on the original buffer size, leading to heap memory corruption. This vulnerability mostly impacts process availability. Maintainers believe exploitation for arbitrary code execution is unlikely. A patch is available and anticipated to be part of yajl-ruby version 1.4.2. As a workaround, avoid passing large inputs to YAJL.

TP-LINK TL-WR840N(ES)_V6.20_180709 was discovered to contain an integer overflow via the function dm_checkString. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted HTTP request.