libp2p-rust is the official rust language Implementation of the libp2p networking stack. Prior to version 0.49.4, the Rust libp2p Gossipsub implementation contains a remotely reachable panic in backoff expiry handling. After a peer sends a crafted PRUNE control message with an attacker-controlled, near-maximum backoff value, the value is accepted and stored as an Instant near the representable upper bound. On a later heartbeat, the implementation performs unchecked Instant + Duration arithmetic (backoff_time + slack), which can overflow and panic with: overflow when adding duration to instant. This issue is reachable from any Gossipsub peer over normal TCP + Noise + mplex/yamux connectivity and requires no further authentication beyond becoming a protocol peer. This issue has been patched in version 0.49.4.

Yamux is a stream multiplexer over reliable, ordered connections such as TCP/IP. Prior to 0.13.10, the Rust implementation of Yamux can panic when processing a crafted inbound Data frame that sets SYN and uses a body length greater than DEFAULT_CREDIT (e.g. 262145). On the first packet of a new inbound stream, stream state is created and a receiver is queued before oversized-body validation completes. When validation fails, the temporary stream is dropped and cleanup may call remove(...).expect("stream not found"), triggering a panic in the connection state machine. This is remotely reachable over a normal Yamux session and does not require authentication. This vulnerability is fixed in 0.13.10.

libp2p-rust is the official rust language Implementation of the libp2p networking stack. In versions prior to 0.49.3, the Gossipsub implementation accepts attacker-controlled PRUNE backoff values and may perform unchecked time arithmetic when storing backoff state. A specially crafted PRUNE control message with an extremely large backoff (e.g. u64::MAX) can lead to Duration/Instant overflow during backoff update logic, triggering a panic in the networking state machine. This is remotely reachable over a normal libp2p connection and does not require authentication. Any application exposing a libp2p Gossipsub listener and using the affected backoff-handling path can be crashed by a network attacker that can reach the service port. The attack can be repeated by reconnecting and replaying the crafted control message. This issue has been fixed in version 0.49.3.

Yamux is a stream multiplexer over reliable, ordered connections such as TCP/IP. From 0.13.0 to before 0.13.9, a specially crafted WindowUpdate can cause arithmetic overflow in send-window accounting, which triggers a panic in the connection state machine. This is remotely reachable over a normal network connection and does not require authentication. This vulnerability is fixed in 0.13.9.

The dag-pb codec can panic when decoding invalid blocks.

js-libp2p is the official javascript Implementation of libp2p networking stack. Versions older than `v0.38.0` of js-libp2p are vulnerable to targeted resource exhaustion attacks. These attacks target libp2p’s connection, stream, peer, and memory management. An attacker can cause the allocation of large amounts of memory, ultimately leading to the process getting killed by the host’s operating system. While a connection manager tasked with keeping the number of connections within manageable limits has been part of js-libp2p, this component was designed to handle the regular churn of peers, not a targeted resource exhaustion attack. Users are advised to update their js-libp2p dependency to `v0.38.0` or greater. There are no known workarounds for this vulnerability.

An issue was discovered in the multihash crate before 0.11.3 for Rust. The from_slice parsing code can panic via unsanitized data from a network server.

libp2p-rust is the official rust language Implementation of the libp2p networking stack. Prior to 0.17.1, libp2p-rendezvous server has no limit on how many namespaces a single peer can register. A malicious peer can just keep registering unique namespaces in a loop and the server happily accepts every single one allocating memory for each registration with no pushback. Keep doing this long enough (or with multiple sybil peers) and the server process gets OOM killed. This vulnerability is fixed in 0.17.1.

go-libp2p is the offical libp2p implementation in the Go programming language. Version `0.18.0` and older of go-libp2p are vulnerable to targeted resource exhaustion attacks. These attacks target libp2p’s connection, stream, peer, and memory management. An attacker can cause the allocation of large amounts of memory, ultimately leading to the process getting killed by the host’s operating system. While a connection manager tasked with keeping the number of connections within manageable limits has been part of go-libp2p, this component was designed to handle the regular churn of peers, not a targeted resource exhaustion attack. Users are advised to upgrade their version of go-libp2p to version `0.18.1` or newer. Users unable to upgrade may consult the denial of service (dos) mitigation page for more information on how to incorporate mitigation strategies, monitor your application, and respond to attacks.

libp2p-rust is the official rust language Implementation of the libp2p networking stack. In versions prior to 0.45.1 an attacker node can cause a victim node to allocate a large number of small memory chunks, which can ultimately lead to the victim’s process running out of memory and thus getting killed by its operating system. When executed continuously, this can lead to a denial of service attack, especially relevant on a larger scale when run against more than one node of a libp2p based network. Users are advised to upgrade to `libp2p` `v0.45.1` or above. Users unable to upgrade should reference the DoS Mitigation page for more information on how to incorporate mitigation strategies, monitor their application, and respond to attacks: https://docs.libp2p.io/reference/dos-mitigation/.

Boxo, formerly known as go-libipfs, is a library for building IPFS applications and implementations. In versions 0.4.0 and 0.5.0, if an attacker is able allocate arbitrary many bytes in the Bitswap server, those allocations are lasting even if the connection is closed. This affects users accepting untrusted connections with the Bitswap server and also affects users using the old API stubs at `github.com/ipfs/go-libipfs/bitswap` because users then transitively import `github.com/ipfs/go-libipfs/bitswap/server`. Boxo versions 0.6.0 and 0.4.1 contain a patch for this issue. As a workaround, those who are using the stub object at `github.com/ipfs/go-libipfs/bitswap` not taking advantage of the features provided by the server can refactor their code to use the new split API that will allow them to run in a client only mode: `github.com/ipfs/go-libipfs/bitswap/client`.

go-unixfs is an implementation of a unix-like filesystem on top of an ipld merkledag. Trying to read malformed HAMT sharded directories can cause panics and virtual memory leaks. If you are reading untrusted user input, an attacker can then trigger a panic. This is caused by bogus `fanout` parameter in the HAMT directory nodes. Users are advised to upgrade to version 0.4.3 to resolve this issue. Users unable to upgrade should not feed untrusted user data to the decoding functions.

github.com/ipfs/go-unixfsnode is an ADL IPLD prime node that wraps go-codec-dagpb's implementation of protobuf to enable pathing. In versions priot to 1.5.2 trying to read malformed HAMT sharded directories can cause panics and virtual memory leaks. If you are reading untrusted user input, an attacker can then trigger a panic. This is caused by bogus fanout parameter in the HAMT directory nodes. Users are advised to upgrade. There are no known workarounds for this vulnerability.

go-ipld-prime is an implementation of the InterPlanetary Linked Data (IPLD) spec interfaces, a batteries-included codec implementations of IPLD for CBOR and JSON, and tooling for basic operations on IPLD objects. Encoding data which contains a Bytes kind Node will pass a Bytes token to the JSON encoder which will panic as it doesn't expect to receive Bytes tokens. Such an encode should be treated as an error, as plain JSON should not be able to encode Bytes. This only impacts uses of the `json` codec. `dag-json` is not impacted. Use of `json` as a decoder is not impacted. This issue is fixed in v0.19.0. As a workaround, one may prefer the `dag-json` codec, which has the ability to encode bytes.

go-merkledag implements the 'DAGService' interface and adds two ipld node types, Protobuf and Raw for the ipfs project. A `ProtoNode` may be modified in such a way as to cause various encode errors which will trigger a panic on common method calls that don't allow for error returns. A `ProtoNode` should only be able to encode to valid DAG-PB, attempting to encode invalid DAG-PB forms will result in an error from the codec. Manipulation of an existing (newly created or decoded) `ProtoNode` using the modifier methods did not account for certain states that would place the `ProtoNode` into an unencodeable form. Due to conformance with the [`github.com/ipfs/go-block-format#Block`](https://pkg.go.dev/github.com/ipfs/go-block-format#Block) and [`github.com/ipfs/go-ipld-format#Node`](https://pkg.go.dev/github.com/ipfs/go-ipld-format#Node) interfaces, certain methods, which internally require a re-encode if state has changed, will panic due to the inability to return an error. This issue has been addressed across a number of pull requests. Users are advised to upgrade to version 0.8.1 for a complete set of fixes. Users unable to upgrade may attempt to mitigate this issue by sanitising inputs when allowing user-input to set a new `CidBuilder` on a `ProtoNode` and by sanitising `Tsize` (`Link#Size`) values such that they are a reasonable byte-size for sub-DAGs where derived from user-input.

libp2p is a networking stack and library modularized out of The IPFS Project, and bundled separately for other tools to use. In go-libp2p, by using signed peer records a malicious actor can store an arbitrary amount of data in a remote node’s memory. This memory does not get garbage collected and so the victim can run out of memory and crash. If users of go-libp2p in production are not monitoring memory consumption over time, it could be a silent attack i.e. the attacker could bring down nodes over a period of time (how long depends on the node resources i.e. a go-libp2p node on a virtual server with 4 gb of memory takes about 90 sec to bring down; on a larger server, it might take a bit longer.) This issue was patched in version 0.27.4.

An issue was discovered in IPFS (aka go-ipfs) 0.4.23. An attacker can generate ephemeral identities (Sybils) and leverage the IPFS connection management reputation system to poison other nodes' routing tables, eclipsing the nodes that are the target of the attack from the rest of the network. Later versions, in particular go-ipfs 0.7, mitigate this.

A CWE-248: Uncaught Exception vulnerability exists in all versions of the Modicon M580, Modicon M340, Modicon Quantum, and Modicon Premium which could cause a possible denial of Service when writing invalid memory blocks to the controller over Modbus.

Incorrect boundary conditions in the Audio/Video: Web Codecs component. This vulnerability was fixed in Firefox 149, Firefox ESR 140.9, Thunderbird 149, and Thunderbird 140.9.

Incorrect boundary conditions, integer overflow in the Graphics component. This vulnerability was fixed in Firefox 149, Firefox ESR 115.34, Firefox ESR 140.9, Thunderbird 149, and Thunderbird 140.9.

Incorrect boundary conditions in the Audio/Video: Playback component. This vulnerability was fixed in Firefox 149, Firefox ESR 115.34, Firefox ESR 140.9, Thunderbird 149, and Thunderbird 140.9.

Incorrect boundary conditions in the Audio/Video: Web Codecs component. This vulnerability was fixed in Firefox 149, Firefox ESR 140.9, Thunderbird 149, and Thunderbird 140.9.

Incorrect boundary conditions in the Layout: Text and Fonts component. This vulnerability was fixed in Firefox 149, Firefox ESR 115.34, Firefox ESR 140.9, Thunderbird 149, and Thunderbird 140.9.

Incorrect boundary conditions in the Graphics: Canvas2D component. This vulnerability was fixed in Firefox 149, Firefox ESR 115.34, Firefox ESR 140.9, Thunderbird 149, and Thunderbird 140.9.

Incorrect boundary conditions in the Graphics component. This vulnerability was fixed in Firefox 149, Firefox ESR 140.9, Thunderbird 149, and Thunderbird 140.9.

Incorrect boundary conditions in the Audio/Video component. This vulnerability was fixed in Firefox 149, Firefox ESR 140.9, Thunderbird 149, and Thunderbird 140.9.

Incorrect boundary conditions in the Graphics component. This vulnerability was fixed in Firefox 149, Firefox ESR 140.9, Thunderbird 149, and Thunderbird 140.9.

conduit-hyper integrates a conduit application with the hyper server. Prior to version 0.4.2, `conduit-hyper` did not check any limit on a request's length before calling [`hyper::body::to_bytes`](https://docs.rs/hyper/latest/hyper/body/fn.to_bytes.html). An attacker could send a malicious request with an abnormally large `Content-Length`, which could lead to a panic if memory allocation failed for that request. In version 0.4.2, `conduit-hyper` sets an internal limit of 128 MiB per request, otherwise returning status 400 ("Bad Request"). This crate is part of the implementation of Rust's [crates.io](https://crates.io/), but that service is not affected due to its existing cloud infrastructure, which already drops such malicious requests. Even with the new limit in place, `conduit-hyper` is not recommended for production use, nor to directly serve the public Internet.

Incorrect boundary conditions in the Graphics: Canvas2D component. This vulnerability was fixed in Firefox 149, Firefox ESR 115.34, Firefox ESR 140.9, Thunderbird 149, and Thunderbird 140.9.

Incorrect boundary conditions in the Graphics: Canvas2D component. This vulnerability was fixed in Firefox 149, Firefox ESR 115.34, Firefox ESR 140.9, Thunderbird 149, and Thunderbird 140.9.

Incorrect boundary conditions in the Audio/Video: GMP component. This vulnerability was fixed in Firefox 149, Firefox ESR 115.34, Firefox ESR 140.9, Thunderbird 149, and Thunderbird 140.9.

fastify is a fast and low overhead web framework, for Node.js. Affected versions of fastify are subject to a denial of service via malicious use of the Content-Type header. An attacker can send an invalid Content-Type header that can cause the application to crash. This issue has been addressed in commit `fbb07e8d` and will be included in release version 4.8.1. Users are advised to upgrade. Users unable to upgrade may manually filter out http content with malicious Content-Type headers.

A CWE-248 Uncaught Exception vulnerability exists in all versions of the Modicon M580, Modicon M340, Modicon Quantum, and Modicon Premium which could cause a Denial of Service when sending invalid breakpoint parameters to the controller over Modbus

In ngmm, there is a possible undefined behavior due to incorrect error handling. This could lead to remote denial of service with no additional execution privileges needed

An issue was discovered in wolfSSL before 5.5.0. When a TLS 1.3 client connects to a wolfSSL server and SSL_clear is called on its session, the server crashes with a segmentation fault. This occurs in the second session, which is created through TLS session resumption and reuses the initial struct WOLFSSL. If the server reuses the previous session structure (struct WOLFSSL) by calling wolfSSL_clear(WOLFSSL* ssl) on it, the next received Client Hello (that resumes the previous session) crashes the server. Note that this bug is only triggered when resuming sessions using TLS session resumption. Only servers that use wolfSSL_clear instead of the recommended SSL_free; SSL_new sequence are affected. Furthermore, wolfSSL_clear is part of wolfSSL's compatibility layer and is not enabled by default. It is not part of wolfSSL's native API.

A CWE-248: Uncaught Exception vulnerability exists in all versions of the Modicon M580, Modicon M340, Modicon Quantum, and Modicon Premium which could cause denial of service when reading invalid physical memory blocks in the controller over Modbus

Binary provides encoding/decoding in Borsh and other formats. The vulnerability is a memory allocation vulnerability that can be exploited to allocate slices in memory with (arbitrary) excessive size value, which can either exhaust available memory or crash the whole program. When using `github.com/gagliardetto/binary` to parse unchecked (or wrong type of) data from untrusted sources of input (e.g. the blockchain) into slices, it's possible to allocate memory with excessive size. When `dec.Decode(&val)` method is used to parse data into a structure that is or contains slices of values, the length of the slice was previously read directly from the data itself without any checks on the size of it, and then a slice was allocated. This could lead to an overflow and an allocation of memory with excessive size value. Users should upgrade to `v0.7.1` or higher. A workaround is not to rely on the `dec.Decode(&val)` function to parse the data, but to use a custom `UnmarshalWithDecoder()` method that reads and checks the length of any slice.

An Improper Check for Unusual or Exceptional Conditions vulnerability in the flow daemon (flowd) of Juniper Networks Junos OS on SRX Series allows an attacker sending a specific, malformed ICMPv6 packet to cause the srxpfe process to crash and restart. Continued receipt and processing of these packets will repeatedly crash the srxpfe process and sustain the Denial of Service (DoS) condition. During NAT64 translation, receipt of a specific, malformed ICMPv6 packet destined to the device will cause the srxpfe process to crash and restart. This issue cannot be triggered using IPv4 nor other IPv6 traffic. This issue affects Junos OS on SRX Series: * all versions before 21.2R3-S10, * all versions of 21.3, * from 21.4 before 21.4R3-S12, * all versions of 22.1, * from 22.2 before 22.2R3-S8, * all versions of 22.4, * from 22.4 before 22.4R3-S9, * from 23.2 before 23.2R2-S6, * from 23.4 before 23.4R2-S7, * from 24.2 before 24.2R2-S3, * from 24.4 before 24.4R2-S3, * from 25.2 before 25.2R1-S2, 25.2R2.

Handlebars provides the power necessary to let users build semantic templates. In versions 4.0.0 through 4.7.8, when a Handlebars template contains decorator syntax referencing an unregistered decorator (e.g. `{{*n}}`), the compiled template calls `lookupProperty(decorators, "n")`, which returns `undefined`. The runtime then immediately invokes the result as a function, causing an unhandled `TypeError: ... is not a function` that crashes the Node.js process. Any application that compiles user-supplied templates without wrapping the call in a `try/catch` is vulnerable to a single-request Denial of Service. Version 4.7.9 fixes the issue. Some workarounds are available. Wrap compilation and rendering in `try/catch`. Validate template input before passing it to `compile()`; reject templates containing decorator syntax (`{{*...}}`) if decorators are not used in your application. Use the pre-compilation workflow; compile templates at build time and serve only pre-compiled templates; do not call `compile()` at request time.

Socket.IO is an open source, real-time, bidirectional, event-based, communication framework. Prior to versions 3.3.5, 3.4.4, and 4.2.6, a specially crafted Socket.IO packet can make the server wait for a large number of binary attachments and buffer them, which can be exploited to make the server run out of memory. This issue has been patched in versions 3.3.5, 3.4.4, and 4.2.6.

An Improper Check for Unusual or Exceptional Conditions vulnerability exists in Schneider Electric's Modicon M221 product (all references, all versions prior to firmware V1.6.2.0). The vulnerability allows unauthorized users to remotely reboot Modicon M221 using crafted programing protocol frames.

fast-xml-parser allows users to process XML from JS object without C/C++ based libraries or callbacks. From version 4.0.0-beta.3 to before version 5.5.7, the DocTypeReader in fast-xml-parser uses JavaScript truthy checks to evaluate maxEntityCount and maxEntitySize configuration limits. When a developer explicitly sets either limit to 0 — intending to disallow all entities or restrict entity size to zero bytes — the falsy nature of 0 in JavaScript causes the guard conditions to short-circuit, completely bypassing the limits. An attacker who can supply XML input to such an application can trigger unbounded entity expansion, leading to memory exhaustion and denial of service. This issue has been patched in version 5.5.7.

Improper conditions check in the Intel(R) SUR software before version 2.4.8902 may allow an unauthenticated user to potentially enable denial of service via network access.

A CWE-248 Uncaught Exception vulnerability exists in all versions of the Modicon M580, Modicon M340, Modicon Quantum, and Modicon Premium which could cause a denial of Service when sending invalid debug parameters to the controller over Modbus.

A CWE-754: Improper Check for Unusual or Exceptional Conditions vulnerability exists in Modicon M580, Modicon M340, Modicon Quantum, Modicon Premium (see security notification for specific versions) which could cause a Denial of Service when reading data with invalid index using Modbus TCP.

A CWE-248: Uncaught Exception vulnerability exists in all versions of the Modicon M580, Modicon M340, Modicon Quantum, and Modicon Premium which could cause a possible Denial of Service when writing out of bounds variables to the controller over Modbus.

GitLab has remediated an issue in GitLab CE/EE affecting all versions from 12.2 before 18.7.5, 18.8 before 18.8.5, and 18.9 before 18.9.1 that could have allowed an unauthenticated user to cause denial of service by sending specially crafted files to the container registry event endpoint under certain conditions.

Improper Check for Unusual or Exceptional Conditions vulnerability in Drupal HTTP Client Manager allows Forceful Browsing.This issue affects HTTP Client Manager: from 0.0.0 before 9.3.13, from 10.0.0 before 10.0.2, from 11.0.0 before 11.0.1.

Incorrect boundary conditions in the Graphics: Canvas2D component. This vulnerability was fixed in Firefox 149, Firefox ESR 115.34, Firefox ESR 140.9, Thunderbird 149, and Thunderbird 140.9.

Incorrect boundary conditions in the Graphics: Text component. This vulnerability was fixed in Firefox 149, Firefox ESR 140.9, Thunderbird 149, and Thunderbird 140.9.