Passport-SAML is a SAML 2.0 authentication provider for Passport, the Node.js authentication library. Prior to version 3.1.0, a malicious SAML payload can require transforms that consume significant system resources to process, thereby resulting in reduced or denied service. This would be an effective way to perform a denial-of-service attack. This has been resolved in version 3.1.0. The resolution is to limit the number of allowable transforms to 2.
A vulnerability was found in JWCrypto. This flaw allows an attacker to cause a denial of service (DoS) attack and possible password brute-force and dictionary attacks to be more resource-intensive. This issue can result in a large amount of computational consumption, causing a denial of service attack.
Mattermost fails to properly sanitize the request to /api/v4/redirect_location allowing an attacker, sending a specially crafted request to /api/v4/redirect_location, to fill up the memory due to caching large items.
The tokio-boring library in version 4.0.0 is affected by a memory leak issue that can lead to excessive resource consumption and potential DoS by resource exhaustion. The set_ex_data function used by the library did not deallocate memory used by pre-existing data in memory each time after completing a TLS connection causing the program to consume more resources with each new connection.
A vulnerability of Uncontrolled Resource Consumption has been identified in STARDOM provided by Yokogawa Electric Corporation. This vulnerability may allow to a remote attacker to cause a denial-of-service condition to the FCN/FCJ controller by sending a crafted packet. While sending the packet, the maintenance homepage of the controller could not be accessed. Therefore, functions of the maintenance homepage, changing configuration, viewing logs, etc. are not available. But the controller’s operation is not stopped by the condition. The affected products and versions are as follows: STARDOM FCN/FCJ R1.01 to R4.31.
quiche v. 0.15.0 through 0.19.0 was discovered to be vulnerable to unbounded queuing of path validation messages, which could lead to excessive resource consumption. QUIC path validation (RFC 9000 Section 8.2) requires that the recipient of a PATH_CHALLENGE frame responds by sending a PATH_RESPONSE. An unauthenticated remote attacker can exploit the vulnerability by sending PATH_CHALLENGE frames and manipulating the connection (e.g. by restricting the peer's congestion window size) so that PATH_RESPONSE frames can only be sent at the slower rate than they are received; leading to storage of path validation data in an unbounded queue. Quiche versions greater than 0.19.0 address this problem.
A regression was introduced in the Red Hat build of python-eventlet due to a change in the patch application strategy, resulting in a patch for CVE-2021-21419 not being applied for all builds of all products.
A uncontrolled resource consumption in Fortinet FortiWeb version 6.4.0, version 6.3.15 and below, 6.2.5 and below allows attacker to cause a denial of service for webserver daemon via crafted HTTP requests
erlang-jose (aka JOSE for Erlang and Elixir) through 1.11.6 allow attackers to cause a denial of service (CPU consumption) via a large p2c (aka PBES2 Count) value in a JOSE header.
lestrrat-go/jwx is a Go module implementing various JWx (JWA/JWE/JWK/JWS/JWT, otherwise known as JOSE) technologies. A p2c parameter set too high in JWE's algorithm PBES2-* could lead to a denial of service. The JWE key management algorithms based on PBKDF2 require a JOSE Header Parameter called p2c (PBES2 Count). This parameter dictates the number of PBKDF2 iterations needed to derive a CEK wrapping key. Its primary purpose is to intentionally slow down the key derivation function, making password brute-force and dictionary attacks more resource- intensive. Therefore, if an attacker sets the p2c parameter in JWE to a very large number, it can cause a lot of computational consumption, resulting in a denial of service. This vulnerability has been addressed in commit `64f2a229b` which has been included in release version 1.2.27 and 2.0.18. Users are advised to upgrade. There are no known workarounds for this vulnerability.
On F5 BIG-IP 13.1.x versions prior to 13.1.5, and all versions of 12.1.x and 11.6.x, when multiple route domains are configured, undisclosed requests to big3d can cause an increase in CPU resource utilization. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated
Mattermost fails to limit the log size of server logs allowing an attacker sending specially crafted requests to different endpoints to potentially overflow the log.
Cosign is a sigstore signing tool for OCI containers. Cosign is susceptible to a denial of service by an attacker controlled registry. An attacker who controls a remote registry can return a high number of attestations and/or signatures to Cosign and cause Cosign to enter a long loop resulting in an endless data attack. The root cause is that Cosign loops through all attestations fetched from the remote registry in pkg/cosign.FetchAttestations. The attacker needs to compromise the registry or make a request to a registry they control. When doing so, the attacker must return a high number of attestations in the response to Cosign. The result will be that the attacker can cause Cosign to go into a long or infinite loop that will prevent other users from verifying their data. In Kyvernos case, an attacker whose privileges are limited to making requests to the cluster can make a request with an image reference to their own registry, trigger the infinite loop and deny other users from completing their admission requests. Alternatively, the attacker can obtain control of the registry used by an organization and return a high number of attestations instead the expected number of attestations. The issue can be mitigated rather simply by setting a limit to the limit of attestations that Cosign will loop through. The limit does not need to be high to be within the vast majority of use cases and still prevent the endless data attack. This issue has been patched in version 2.2.1 and users are advised to upgrade.
JPA Server in HAPI FHIR before 5.4.0 allows a user to deny service (e.g., disable access to the database after the attack stops) via history requests. This occurs because of a SELECT COUNT statement that requires a full index scan, with an accompanying large amount of server resources if there are many simultaneous history requests.
A denial-of-service vulnerability in the Fanuc i Series CNC (0i-MD and 0i Mate-MD) could allow an unauthenticated, remote attacker to cause an affected CNC to become inaccessible to other devices.
On F5 BIG-IP APM 16.1.x versions prior to 16.1.2.2, 15.1.x versions prior to 15.1.5.1, 14.1.x versions prior to 14.1.4.6, 13.1.x versions prior to 13.1.5, and all versions of 12.1.x and 11.6.x, when APM is configured on a virtual server and the associated access profile is configured with APM AAA NTLM Auth, undisclosed requests can cause an increase in internal resource utilization. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated
The Multipass service was found to have code paths that could be abused to cause a denial of service for authentication or authorization operations. A malicious attacker could perform an application-level denial of service attack, potentially causing authentication and/or authorization operations to fail for the duration of the attack. This could lead to performance degradation or login failures for customer Palantir Foundry environments. This vulnerability is resolved in Multipass 3.647.0. This issue affects: Palantir Foundry Multipass versions prior to 3.647.0.
On version 16.x before 16.1.0, 15.1.x before 15.1.3.1, 14.1.x before 14.1.4.3, and all versions of 13.1.x, 12.1.x and 11.6.x, when BIG-IP APM performs Online Certificate Status Protocol (OCSP) verification of a certificate that contains Authority Information Access (AIA), undisclosed requests may cause an increase in memory use. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.
An issue was discovered in OWASP ModSecurity Core Rule Set (CRS) through 3.1.0. /rules/REQUEST-933-APPLICATION-ATTACK-PHP.conf allows remote attackers to cause a denial of service (ReDOS) by entering a specially crafted string with next# at the beginning and nested repetition operators. NOTE: the software maintainer disputes that this is a vulnerability because the issue cannot be exploited via ModSecurity
A vulnerability has been identified in SIPROTEC 5 6MD84 (CP300) (All versions < V9.50), SIPROTEC 5 6MD85 (CP200) (All versions), SIPROTEC 5 6MD85 (CP300) (All versions < V9.50), SIPROTEC 5 6MD86 (CP200) (All versions), SIPROTEC 5 6MD86 (CP300) (All versions < V9.50), SIPROTEC 5 6MD89 (CP300) (All versions < V9.64), SIPROTEC 5 6MU85 (CP300) (All versions < V9.50), SIPROTEC 5 7KE85 (CP200) (All versions), SIPROTEC 5 7KE85 (CP300) (All versions < V9.64), SIPROTEC 5 7SA82 (CP100) (All versions), SIPROTEC 5 7SA82 (CP150) (All versions < V9.50), SIPROTEC 5 7SA84 (CP200) (All versions), SIPROTEC 5 7SA86 (CP200) (All versions), SIPROTEC 5 7SA86 (CP300) (All versions < V9.50), SIPROTEC 5 7SA87 (CP200) (All versions), SIPROTEC 5 7SA87 (CP300) (All versions < V9.50), SIPROTEC 5 7SD82 (CP100) (All versions), SIPROTEC 5 7SD82 (CP150) (All versions < V9.50), SIPROTEC 5 7SD84 (CP200) (All versions), SIPROTEC 5 7SD86 (CP200) (All versions), SIPROTEC 5 7SD86 (CP300) (All versions < V9.50), SIPROTEC 5 7SD87 (CP200) (All versions), SIPROTEC 5 7SD87 (CP300) (All versions < V9.50), SIPROTEC 5 7SJ81 (CP100) (All versions < V8.89), SIPROTEC 5 7SJ81 (CP150) (All versions < V9.50), SIPROTEC 5 7SJ82 (CP100) (All versions < V8.89), SIPROTEC 5 7SJ82 (CP150) (All versions < V9.50), SIPROTEC 5 7SJ85 (CP200) (All versions), SIPROTEC 5 7SJ85 (CP300) (All versions < V9.50), SIPROTEC 5 7SJ86 (CP200) (All versions), SIPROTEC 5 7SJ86 (CP300) (All versions < V9.50), SIPROTEC 5 7SK82 (CP100) (All versions < V8.89), SIPROTEC 5 7SK82 (CP150) (All versions < V9.50), SIPROTEC 5 7SK85 (CP200) (All versions), SIPROTEC 5 7SK85 (CP300) (All versions < V9.50), SIPROTEC 5 7SL82 (CP100) (All versions), SIPROTEC 5 7SL82 (CP150) (All versions < V9.50), SIPROTEC 5 7SL86 (CP200) (All versions), SIPROTEC 5 7SL86 (CP300) (All versions < V9.50), SIPROTEC 5 7SL87 (CP200) (All versions), SIPROTEC 5 7SL87 (CP300) (All versions < V9.50), SIPROTEC 5 7SS85 (CP200) (All versions), SIPROTEC 5 7SS85 (CP300) (All versions < V9.50), SIPROTEC 5 7ST85 (CP200) (All versions), SIPROTEC 5 7ST85 (CP300) (All versions < V9.64), SIPROTEC 5 7ST86 (CP300) (All versions < V9.64), SIPROTEC 5 7SX82 (CP150) (All versions < V9.50), SIPROTEC 5 7SX85 (CP300) (All versions < V9.50), SIPROTEC 5 7UM85 (CP300) (All versions < V9.50), SIPROTEC 5 7UT82 (CP100) (All versions), SIPROTEC 5 7UT82 (CP150) (All versions < V9.50), SIPROTEC 5 7UT85 (CP200) (All versions), SIPROTEC 5 7UT85 (CP300) (All versions < V9.50), SIPROTEC 5 7UT86 (CP200) (All versions), SIPROTEC 5 7UT86 (CP300) (All versions < V9.50), SIPROTEC 5 7UT87 (CP200) (All versions), SIPROTEC 5 7UT87 (CP300) (All versions < V9.50), SIPROTEC 5 7VE85 (CP300) (All versions < V9.50), SIPROTEC 5 7VK87 (CP200) (All versions), SIPROTEC 5 7VK87 (CP300) (All versions < V9.50), SIPROTEC 5 7VU85 (CP300) (All versions < V9.50), SIPROTEC 5 Communication Module ETH-BA-2EL (All versions < V8.89 installed on CP100 devices), SIPROTEC 5 Communication Module ETH-BA-2EL (All versions < V9.50 installed on CP150 and CP300 devices), SIPROTEC 5 Communication Module ETH-BA-2EL (All versions installed on CP200 devices), SIPROTEC 5 Communication Module ETH-BB-2FO (All versions < V8.89 installed on CP100 devices), SIPROTEC 5 Communication Module ETH-BB-2FO (All versions < V9.50 installed on CP150 and CP300 devices), SIPROTEC 5 Communication Module ETH-BB-2FO (All versions installed on CP200 devices), SIPROTEC 5 Communication Module ETH-BD-2FO (All versions < V9.50), SIPROTEC 5 Compact 7SX800 (CP050) (All versions < V9.50). Affected devices do not properly restrict secure client-initiated renegotiations within the SSL and TLS protocols. This could allow an attacker to create a denial of service condition on the ports 443/tcp and 4443/tcp for the duration of the attack.
In PHP versions 7.2.x below 7.2.31, 7.3.x below 7.3.18 and 7.4.x below 7.4.6, when HTTP file uploads are allowed, supplying overly long filenames or field names could lead PHP engine to try to allocate oversized memory storage, hit the memory limit and stop processing the request, without cleaning up temporary files created by upload request. This potentially could lead to accumulation of uncleaned temporary files exhausting the disk space on the target server.
On F5 BIG-IP 16.1.x versions prior to 16.1.2.2, 15.1.x versions prior to 15.1.5.1, and 14.1.x versions prior to 14.1.4.6, when BIG-IP packet filters are enabled and a virtual server is configured with the type set to Reject, undisclosed requests can cause an increase in memory resource utilization. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated
Marked is an open-source markdown parser and compiler (npm package "marked"). In marked from version 1.1.1 and before version 2.0.0, there is a Regular expression Denial of Service vulnerability. This vulnerability can affect anyone who runs user generated code through marked. This vulnerability is fixed in version 2.0.0.
A ZTE product has a configuration error vulnerability. Because a certain port is open by default, an attacker can consume system processing resources by flushing a large number of packets to the port, and successfully exploiting this vulnerability could reduce system processing capabilities. This affects: ZXA10 C300M all versions up to V4.3P8.
uap-core in an open-source npm package which contains the core of BrowserScope's original user agent string parser. In uap-core before version 0.11.0, some regexes are vulnerable to regular expression denial of service (REDoS) due to overlapping capture groups. This allows remote attackers to overload a server by setting the User-Agent header in an HTTP(S) request to maliciously crafted long strings. This is fixed in version 0.11.0. Downstream packages such as uap-python, uap-ruby etc which depend upon uap-core follow different version schemes.
Eventlet is a concurrent networking library for Python. A websocket peer may exhaust memory on Eventlet side by sending very large websocket frames. Malicious peer may exhaust memory on Eventlet side by sending highly compressed data frame. A patch in version 0.31.0 restricts websocket frame to reasonable limits. As a workaround, restricting memory usage via OS limits would help against overall machine exhaustion, but there is no workaround to protect Eventlet process.
The jQuery Validation Plugin provides drop-in validation for your existing forms. It is published as an npm package "jquery-validation". jquery-validation before version 1.19.3 contains one or more regular expressions that are vulnerable to ReDoS (Regular Expression Denial of Service). This is fixed in 1.19.3.
Dell PowerScale OneFS versions 9.1.0.3 and earlier contain a denial of service vulnerability. SmartConnect had an error condition that may be triggered to loop, using CPU and potentially preventing other SmartConnect DNS responses.
Vapor is a web framework for Swift. In Vapor before version 4.40.1, there is a DoS attack against anyone who Bootstraps a metrics backend for their Vapor app. The following is the attack vector: 1. send unlimited requests against a vapor instance with different paths. this will create unlimited counters and timers, which will eventually drain the system. 2. downstream services might suffer from this attack as well by being spammed with error paths. This has been patched in 4.40.1. The `DefaultResponder` will rewrite any undefined route paths for to `vapor_route_undefined` to avoid unlimited counters.
Denial-of-service vulnerability in the web server of the Eaton SMP Gateway allows attacker to potentially force an unexpected restart of the automation platform, impacting the availability of the product. In rare situations, the issue could cause the SMP device to restart in Safe Mode or Max Safe Mode. When in Max Safe Mode, the product is not vulnerable anymore.
A flaw was found in spice in versions before 0.14.92. A DoS tool might make it easier for remote attackers to cause a denial of service (CPU consumption) by performing many renegotiations within a single connection.
A vulnerability in the Cisco IOx Application Framework of Cisco 809 Industrial Integrated Services Routers (Industrial ISRs), Cisco 829 Industrial ISRs, Cisco CGR 1000 Compute Module, and Cisco IC3000 Industrial Compute Gateway could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to insufficient error handling during packet processing. An attacker could exploit this vulnerability by sending a high and sustained rate of crafted TCP traffic to the IOx web server on an affected device. A successful exploit could allow the attacker to cause the IOx web server to stop processing requests, resulting in a DoS condition.
A vulnerability in the SSH service of the Cisco StarOS operating system could allow an unauthenticated, remote attacker to cause an affected device to stop processing traffic, resulting in a denial of service (DoS) condition. The vulnerability is due to a logic error that may occur under specific traffic conditions. An attacker could exploit this vulnerability by sending a series of crafted packets to an affected device. A successful exploit could allow the attacker to prevent the targeted service from receiving any traffic, which would lead to a DoS condition on the affected device.
Versions of the package graphql from 16.3.0 and before 16.8.1 are vulnerable to Denial of Service (DoS) due to insufficient checks in the OverlappingFieldsCanBeMergedRule.ts file when parsing large queries. This vulnerability allows an attacker to degrade system performance. **Note:** It was not proven that this vulnerability can crash the process.
In Apache HTTP server versions 2.4.37 and prior, by sending request bodies in a slow loris way to plain resources, the h2 stream for that request unnecessarily occupied a server thread cleaning up that incoming data. This affects only HTTP/2 (mod_http2) connections.
This affects the package codemirror before 5.58.2; the package org.apache.marmotta.webjars:codemirror before 5.58.2. The vulnerable regular expression is located in https://github.com/codemirror/CodeMirror/blob/cdb228ac736369c685865b122b736cd0d397836c/mode/javascript/javascript.jsL129. The ReDOS vulnerability of the regex is mainly due to the sub-pattern (s|/*.*?*/)*
The PROFINET (PNIO) stack, when integrated with the Interniche IP stack, improperly handles internal resources for TCP segments where the minimum TCP-Header length is less than defined. This could allow an attacker to create a denial of service condition for TCP services on affected devices by sending specially crafted TCP segments.
All versions of package djvalidator are vulnerable to Regular Expression Denial of Service (ReDoS) by sending crafted invalid emails - for example, --@------------------------------------------------------------------------------------------------------------------------!.
All versions of package express-validators are vulnerable to Regular Expression Denial of Service (ReDoS) when validating specifically-crafted invalid urls.
A vulnerability has been found in MarkText up to 0.17.1 and classified as problematic. Affected by this vulnerability is the function getRecommendTitleFromMarkdownString of the file marktext/src/main/utils/index.js. The manipulation leads to inefficient regular expression complexity. The attack can be launched remotely. The exploit has been disclosed to the public and may be used.
A vulnerability was found in CodeMirror up to 5.17.0 and classified as problematic. Affected by this issue is some unknown functionality of the file mode/markdown/markdown.js of the component Markdown Mode. The manipulation leads to inefficient regular expression complexity. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. Not all code samples mentioned in the GitHub issue can be found. The repository mentions, that "CodeMirror 6 exists, and is [...] much more actively maintained."
Dell EMC Isilon OneFS versions 8.2.2 and earlier contain a denial of service vulnerability. SmartConnect had an error condition that may be triggered to loop, using CPU and potentially preventing other SmartConnect DNS responses.
A vulnerability classified as problematic was found in Unitech pm2 up to 6.0.6. This vulnerability affects unknown code of the file /lib/tools/Config.js. The manipulation leads to inefficient regular expression complexity. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used.
oak is a middleware framework for Deno's native HTTP server, Deno Deploy, Node.js 16.5 and later, Cloudflare Workers and Bun. In versions 17.1.5 and below, it's possible to significantly slow down an oak server with specially crafted values of the x-forwarded-proto or x-forwarded-for headers.
TUF (aka The Update Framework) 0.7.2 through 0.12.1 allows Uncontrolled Resource Consumption.
ImageSharp is a 2D graphics library. In versions below 2.1.11 and 3.0.0 through 3.1.10, a specially crafted GIF file containing a malformed comment extension block (with a missing block terminator) can cause the ImageSharp GIF decoder to enter an infinite loop while attempting to skip the block. This leads to a denial of service. Applications processing untrusted GIF input should upgrade to a patched version. This issue is fixed in versions 2.1.11 and 3.1.11.
VMware ESXi and vCenter Server contain a partial denial of service vulnerability in their respective authentication services. VMware has evaluated the severity of this issue to be in the Moderate severity range with a maximum CVSSv3 base score of 5.3.
Certain HP OfficeJet Pro printers are potentially vulnerable to a Denial of Service when using an improper eSCL URL GET request.
This affects the package glob-parent before 5.1.2. The enclosure regex used to check for strings ending in enclosure containing path separator.
This affects the package jinja2 from 0.0.0 and before 2.11.3. The ReDoS vulnerability is mainly due to the `_punctuation_re regex` operator and its use of multiple wildcards. The last wildcard is the most exploitable as it searches for trailing punctuation. This issue can be mitigated by Markdown to format user content instead of the urlize filter, or by implementing request timeouts and limiting process memory.