Cloudflare quiche was discovered to be vulnerable to unbounded storage of information related to connection ID retirement, which could lead to excessive resource consumption. Each QUIC connection possesses a set of connection Identifiers (IDs); see RFC 9000 Section 5.1 https://datatracker.ietf.org/doc/html/rfc9000#section-5.1 . Endpoints declare the number of active connection IDs they are willing to support using the active_connection_id_limit transport parameter. The peer can create new IDs using a NEW_CONNECTION_ID frame but must stay within the active ID limit. This is done by retirement of old IDs, the endpoint sends NEW_CONNECTION_ID includes a value in the retire_prior_to field, which elicits a RETIRE_CONNECTION_ID frame as confirmation. An unauthenticated remote attacker can exploit the vulnerability by sending NEW_CONNECTION_ID frames and manipulating the connection (e.g. by restricting the peer's congestion window size) so that RETIRE_CONNECTION_ID frames can only be sent at a slower rate than they are received, leading to storage of information related to connection IDs in an unbounded queue. Quiche versions 0.19.2 and 0.20.1 are the earliest to address this problem. There is no workaround for affected versions.

quiche v. 0.15.0 through 0.19.0 was discovered to be vulnerable to unbounded queuing of path validation messages, which could lead to excessive resource consumption. QUIC path validation (RFC 9000 Section 8.2) requires that the recipient of a PATH_CHALLENGE frame responds by sending a PATH_RESPONSE. An unauthenticated remote attacker can exploit the vulnerability by sending PATH_CHALLENGE frames and manipulating the connection (e.g. by restricting the peer's congestion window size) so that PATH_RESPONSE frames can only be sent at the slower rate than they are received; leading to storage of path validation data in an unbounded queue. Quiche versions greater than 0.19.0 address this problem.

Impact Cloudflare quiche was discovered to be vulnerable to incorrect congestion window growth, which could cause it to send data at a rate faster than the path might actually support. An unauthenticated remote attacker can exploit the vulnerability by first completing a handshake and initiating a congestion-controlled data transfer towards itself. Then, it could manipulate the victim's congestion control state by sending ACK frames exercising an opportunistic ACK attack; see RFC 9000 Section 21.4. The victim could grow the congestion window beyond typical expectations and allow more bytes in flight than the path might really support. Patches quiche 0.24.4 is the earliest version containing the fix for this issue.

sflow decode package does not employ sufficient packet sanitisation which can lead to a denial of service attack. Attackers can craft malformed packets causing the process to consume large amounts of memory resulting in a denial of service.

OctoRPKI tries to load the entire contents of a repository in memory, and in the case of a GZIP bomb, unzip it in memory, making it possible to create a repository that makes OctoRPKI run out of memory (and thus crash).

Cloudflare Quiche (through version 0.19.1/0.20.0) was affected by an unlimited resource allocation vulnerability causing rapid increase of memory usage of the system running quiche server or client. A remote attacker could take advantage of this vulnerability by repeatedly sending an unlimited number of 1-RTT CRYPTO frames after previously completing the QUIC handshake. Exploitation was possible for the duration of the connection which could be extended by the attacker.  quiche 0.19.2 and 0.20.1 are the earliest versions containing the fix for this issue.

OctoRPKI does not limit the depth of a certificate chain, allowing for a CA to create children in an ad-hoc fashion, thereby making tree traversal never end.

OctoRPKI does not limit the length of a connection, allowing for a slowloris DOS attack to take place which makes OctoRPKI wait forever. Specifically, the repository that OctoRPKI sends HTTP requests to will keep the connection open for a day before a response is returned, but does keep drip feeding new bytes to keep the connection alive.

Uncontrolled Resource Consumption vulnerability in Saturday Drive Ninja Forms Contact Form – The Drag and Drop Form Builder for WordPress leading to DoS.This issue affects Ninja Forms Contact Form – The Drag and Drop Form Builder for WordPress: from n/a through 3.6.25.

Improper Resource Shutdown or Release vulnerability in ASR180x 、ASR190x in router components allows Resource Leak Exposure. This vulnerability is associated with program files router/phonebook/pb.c. This issue affects Falcon_Linux、Kestrel、Lapwing_Linux: before v1536.

CometBFT is a Byzantine Fault Tolerant (BFT) middleware that takes a state transition machine and replicates it on many machines. An internal modification made in versions 0.34.28 and 0.37.1 to the way struct `PeerState` is serialized to JSON introduced a deadlock when new function MarshallJSON is called. This function can be called from two places. The first is via logs, setting the `consensus` logging module to "debug" level (should not happen in production), and setting the log output format to JSON. The second is via RPC `dump_consensus_state`. Case 1, which should not be hit in production, will eventually hit the deadlock in most goroutines, effectively halting the node. In case 2, only the data structures related to the first peer will be deadlocked, together with the thread(s) dealing with the RPC request(s). This means that only one of the channels of communication to the node's peers will be blocked. Eventually the peer will timeout and excluded from the list (typically after 2 minutes). The goroutines involved in the deadlock will not be garbage collected, but they will not interfere with the system after the peer is excluded. The theoretical worst case for case 2, is a network with only two validator nodes. In this case, each of the nodes only has one `PeerState` struct. If `dump_consensus_state` is called in either node (or both), the chain will halt until the peer connections time out, after which the nodes will reconnect (with different `PeerState` structs) and the chain will progress again. Then, the same process can be repeated. As the number of nodes in a network increases, and thus, the number of peer struct each node maintains, the possibility of reproducing the perturbation visible with two nodes decreases. Only the first `PeerState` struct will deadlock, and not the others (RPC `dump_consensus_state` accesses them in a for loop, so the deadlock at the first iteration causes the rest of the iterations of that "for" loop to never be reached). This regression was fixed in versions 0.34.29 and 0.37.2. Some workarounds are available. For case 1 (hitting the deadlock via logs), either don't set the log output to "json", leave at "plain", or don't set the consensus logging module to "debug", leave it at "info" or higher. For case 2 (hitting the deadlock via RPC `dump_consensus_state`), do not expose `dump_consensus_state` RPC endpoint to the public internet (e.g., via rules in one's nginx setup).

Improper Resource Shutdown or Release vulnerability in ASR Falcon_Linux、Kestrel、Lapwing_Linux on Linux (traffic_stat modules) allows Resource Leak Exposure. This vulnerability is associated with program files traffic_stat/traffic_service/traffic_service.C. This issue affects Falcon_Linux、Kestrel、Lapwing_Linux: before v1536.

A flaw was found in Open Virtual Network where the service monitor MAC does not properly rate limit. This issue could allow an attacker to cause a denial of service, including on deployments with CoPP enabled and properly configured.

A vulnerability classified as problematic was found in Chengdu VEC40G 3.0. Affected by this vulnerability is an unknown functionality of the file /send_order.cgi?parameter=restart. The manipulation of the argument restart with the input reboot leads to denial of service. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-231229 was assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

Uncontrolled Resource Consumption in SICK FTMg AIR FLOW SENSOR with Partnumbers 1100214, 1100215, 1100216, 1120114, 1120116, 1122524, 1122526 allows an remote attacker to influence the availability of the webserver by invocing a Slowloris style attack via HTTP requests.

Extremely large RSA keys in certificate chains can cause a client/server to expend significant CPU time verifying signatures. With fix, the size of RSA keys transmitted during handshakes is restricted to <= 8192 bits. Based on a survey of publicly trusted RSA keys, there are currently only three certificates in circulation with keys larger than this, and all three appear to be test certificates that are not actively deployed. It is possible there are larger keys in use in private PKIs, but we target the web PKI, so causing breakage here in the interests of increasing the default safety of users of crypto/tls seems reasonable.

comrak is a CommonMark + GFM compatible Markdown parser and renderer written in rust. A range of quadratic parsing issues are present in Comrak. These can be used to craft denial-of-service attacks on services that use Comrak to parse Markdown. This issue has been addressed in version 0.17.0. Users are advised to upgrade. There are no known workarounds for this vulnerability. This issue is also tracked as `GHSL-2023-047`

Ribose RNP before 0.16.3 may hang when the input is malformed.

A security flaw has been discovered in Open5GS up to 2.7.5. This issue affects some unknown processing of the component Timer Handler. The manipulation results in resource consumption. The attack may be performed from remote. The exploit has been released to the public and may be used for attacks. The patch is identified as c7c131f8d2cb1195ada5e0e691b6868ebcd8a845. It is best practice to apply a patch to resolve this issue.

A vulnerability was determined in Open5GS up to 2.7.6. Impacted is the function sgwc_s11_handle_downlink_data_notification_ack of the file src/sgwc/s11-handler.c of the component sgwc. This manipulation causes denial of service. The attack can be initiated remotely. The exploit has been publicly disclosed and may be utilized. Patch name: b4707272c1caf6a7d4dca905694ea55557a0545f. To fix this issue, it is recommended to deploy a patch. The issue report is flagged as already-fixed.

Versions of the package asyncua before 0.9.96 are vulnerable to Denial of Service (DoS) such that an attacker can send a malformed packet and as a result, the server will enter into an infinite loop and consume excessive memory.

A vulnerability has been identified in SIMATIC ET 200pro IM154-8 PN/DP CPU (All versions < V3.X.17), SIMATIC ET 200pro IM154-8F PN/DP CPU (All versions < V3.X.17), SIMATIC ET 200pro IM154-8FX PN/DP CPU (All versions < V3.X.17), SIMATIC ET 200S IM151-8 PN/DP CPU (All versions < V3.X.17), SIMATIC ET 200S IM151-8F PN/DP CPU (All versions < V3.X.17), SIMATIC S7-1200 CPU family (incl. SIPLUS variants) (All versions < V4.1), SIMATIC S7-300 CPU 314C-2 PN/DP (All versions < V3.X.17), SIMATIC S7-300 CPU 315-2 PN/DP (All versions < V3.X.17), SIMATIC S7-300 CPU 315F-2 PN/DP (All versions < V3.X.17), SIMATIC S7-300 CPU 315T-3 PN/DP (All versions < V3.X.17), SIMATIC S7-300 CPU 317-2 PN/DP (All versions < V3.X.17), SIMATIC S7-300 CPU 317F-2 PN/DP (All versions < V3.X.17), SIMATIC S7-300 CPU 317T-3 PN/DP (All versions < V3.X.17), SIMATIC S7-300 CPU 317TF-3 PN/DP (All versions < V3.X.17), SIMATIC S7-300 CPU 319-3 PN/DP (All versions < V3.X.17), SIMATIC S7-300 CPU 319F-3 PN/DP (All versions < V3.X.17), SIMATIC S7-400 PN/DP V6 and below CPU family (incl. SIPLUS variants) (All versions), SIMATIC S7-400 PN/DP V7 CPU family (incl. SIPLUS variants) (All versions), SIMATIC WinAC RTX 2010 (All versions), SIMATIC WinAC RTX F 2010 (All versions), SIPLUS ET 200S IM151-8 PN/DP CPU (All versions < V3.X.17), SIPLUS ET 200S IM151-8F PN/DP CPU (All versions < V3.X.17), SIPLUS S7-300 CPU 314C-2 PN/DP (All versions < V3.X.17), SIPLUS S7-300 CPU 315-2 PN/DP (All versions < V3.X.17), SIPLUS S7-300 CPU 315F-2 PN/DP (All versions < V3.X.17), SIPLUS S7-300 CPU 317-2 PN/DP (All versions < V3.X.17), SIPLUS S7-300 CPU 317F-2 PN/DP (All versions < V3.X.17). Affected devices contain a vulnerability that could cause a denial of service condition of the web server by sending specially crafted HTTP requests to ports 80/tcp and 443/tcp. Beyond the web service, no other functions or interfaces are affected by the denial of service condition.

A vulnerability classified as problematic was found in Open5GS up to 2.7.2. Affected by this vulnerability is the function amf_nsmf_pdusession_handle_update_sm_context of the file src/amf/nsmf-handler.c of the component AMF. The manipulation leads to denial of service. The attack can be launched remotely. This vulnerability allows a single UE to crash the AMF, resulting in the complete loss of mobility and session management services and causing a network-wide outage. All registered UEs will lose connectivity, and new registrations will be blocked until the AMF is restarted, leading to a high availability impact. The exploit has been disclosed to the public and may be used. It is recommended to apply a patch to fix this issue.

cmark-gfm is GitHub's fork of cmark, a CommonMark parsing and rendering library and program in C. A polynomial time complexity issue in cmark-gfm may lead to unbounded resource exhaustion and subsequent denial of service. This CVE covers quadratic complexity issues when parsing text which leads with either large numbers of `_` characters. This issue has been addressed in version 0.29.0.gfm.10. Users are advised to upgrade. Users unable to upgrade should validate that their input comes from trusted sources. ### Impact A polynomial time complexity issue in cmark-gfm may lead to unbounded resource exhaustion and subsequent denial of service. ### Proof of concept ``` $ ~/cmark-gfm$ python3 -c 'pad = "_" * 100000; print(pad + "." + pad, end="")' | time ./build/src/cmark-gfm --to plaintext ``` Increasing the number 10000 in the above commands causes the running time to increase quadratically. ### Patches This vulnerability have been patched in 0.29.0.gfm.10. ### Note on cmark and cmark-gfm XXX: TBD [cmark-gfm](https://github.com/github/cmark-gfm) is a fork of [cmark](https://github.com/commonmark/cmark) that adds the GitHub Flavored Markdown extensions. The two codebases have diverged over time, but share a common core. These bugs affect both `cmark` and `cmark-gfm`. ### Credit We would like to thank @gravypod for reporting this vulnerability. ### References https://en.wikipedia.org/wiki/Time_complexity ### For more information If you have any questions or comments about this advisory: * Open an issue in [github/cmark-gfm](https://github.com/github/cmark-gfm)

A vulnerability has been found in Open5GS up to 2.7.6. Affected by this vulnerability is an unknown functionality of the component GTPv2 Bearer Response Handler. Such manipulation leads to denial of service. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The name of the patch is 98f76e98df35cd6a35e868aa62715db7f8141ac1. A patch should be applied to remediate this issue.

A weakness has been identified in aiwaves-cn agents up to e8c4e3c2d19739d3dff59e577d1c97090cc15f59. Affected by this issue is the function recall_relevant_memories_to_working_memory of the file core/cat/looking_glass/stray_cat.py of the component cheshire_cat_core. This manipulation causes resource consumption. Remote exploitation of the attack is possible. The exploit has been made available to the public and could be used for attacks. This product follows a rolling release approach for continuous delivery, so version details for affected or updated releases are not provided. The project was informed of the problem early through an issue report but has not responded yet.

A vulnerability, which was classified as problematic, has been found in OpenCV wechat_qrcode Module up to 4.7.0. Affected by this issue is the function DecodedBitStreamParser::decodeHanziSegment of the file qrcode/decoder/decoded_bit_stream_parser.cpp. The manipulation leads to memory leak. The attack may be launched remotely. The name of the patch is 2b62ff6181163eea029ed1cab11363b4996e9cd6. It is recommended to apply a patch to fix this issue. The identifier of this vulnerability is VDB-228548.

A vulnerability was found in Open5GS up to 2.7.6. Affected by this issue is the function sgwc_s5c_handle_create_session_response of the file src/sgwc/s5c-handler.c. Performing a manipulation results in denial of service. Remote exploitation of the attack is possible. The exploit has been made public and could be used. The patch is named b19cf6a2dbf5d30811be4488bf059c865bd7d1d2. To fix this issue, it is recommended to deploy a patch.

react/http is an event-driven, streaming HTTP client and server implementation for ReactPHP. Previous versions of ReactPHP's HTTP server component contain a potential DoS vulnerability that can cause high CPU load when processing large HTTP request bodies. This vulnerability has little to no impact on the default configuration, but can be exploited when explicitly using the RequestBodyBufferMiddleware with very large settings. This might lead to consuming large amounts of CPU time for processing requests and significantly delay or slow down the processing of legitimate user requests. This issue has been addressed in release 1.9.0. Users are advised to upgrade. Users unable to upgrade may keep the request body limited using RequestBodyBufferMiddleware with a sensible value which should mitigate the issue. An infrastructure or DevOps workaround could be to place a reverse proxy in front of the ReactPHP HTTP server to filter out any excessive HTTP request bodies.

A vulnerability was identified in vllm-project vllm 0.19.0. This issue affects some unknown processing of the component OpenAI-compatible Serving Path. Such manipulation leads to denial of service. It is possible to launch the attack remotely. The exploit is publicly available and might be used. The pull request to fix this issue awaits acceptance.

An issue was discovered in OWASP ModSecurity Core Rule Set (CRS) through 3.1.0. /rules/REQUEST-933-APPLICATION-ATTACK-PHP.conf allows remote attackers to cause a denial of service (ReDOS) by entering a specially crafted string with next# at the beginning and nested repetition operators. NOTE: the software maintainer disputes that this is a vulnerability because the issue cannot be exploited via ModSecurity

In PHP versions 7.2.x below 7.2.31, 7.3.x below 7.3.18 and 7.4.x below 7.4.6, when HTTP file uploads are allowed, supplying overly long filenames or field names could lead PHP engine to try to allocate oversized memory storage, hit the memory limit and stop processing the request, without cleaning up temporary files created by upload request. This potentially could lead to accumulation of uncleaned temporary files exhausting the disk space on the target server.

An issue was discovered in OWASP ModSecurity Core Rule Set (CRS) through 3.1.0. /rules/REQUEST-942-APPLICATION-ATTACK-SQLI.conf allows remote attackers to cause a denial of service (ReDOS) by entering a specially crafted string with nested repetition operators.

A vulnerability has been found in Tenda CH22 up to 1.0.0.1. Affected by this vulnerability is the function fromDhcpListClient of the file /goform/DhcpListClient. Such manipulation of the argument LISTLEN leads to denial of service. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.

A security flaw has been discovered in VectifyAI PageIndex up to f50e52975313c6716c02b20a119577a1929decba. Affected by this vulnerability is the function toc_transformer of the file pageindex/page_index.py of the component PDF Table of Contents Handler. The manipulation results in infinite loop. The attack may be launched remotely. The exploit has been released to the public and may be used for attacks. This product operates on a rolling release basis, ensuring continuous delivery. Consequently, there are no version details for either affected or updated releases.

Jetty is a java based web server and servlet engine. In affected versions servlets with multipart support (e.g. annotated with `@MultipartConfig`) that call `HttpServletRequest.getParameter()` or `HttpServletRequest.getParts()` may cause `OutOfMemoryError` when the client sends a multipart request with a part that has a name but no filename and very large content. This happens even with the default settings of `fileSizeThreshold=0` which should stream the whole part content to disk. An attacker client may send a large multipart request and cause the server to throw `OutOfMemoryError`. However, the server may be able to recover after the `OutOfMemoryError` and continue its service -- although it may take some time. This issue has been patched in versions 9.4.51, 10.0.14, and 11.0.14. Users are advised to upgrade. Users unable to upgrade may set the multipart parameter `maxRequestSize` which must be set to a non-negative value, so the whole multipart content is limited (although still read into memory).

When an SSL profile is configured on a Virtual Server, undisclosed traffic can cause an increase in CPU or SSL accelerator resource utilization.   Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.

An issue was discovered in Schneider Electric Magelis HMI Magelis GTO Advanced Optimum Panels, all versions, Magelis GTU Universal Panel, all versions, Magelis STO5xx and STU Small panels, all versions, Magelis XBT GH Advanced Hand-held Panels, all versions, Magelis XBT GK Advanced Touchscreen Panels with Keyboard, all versions, Magelis XBT GT Advanced Touchscreen Panels, all versions, and Magelis XBT GTW Advanced Open Touchscreen Panels (Windows XPe). An attacker can open multiple connections to a targeted web server and keep connections open preventing new connections from being made, rendering the web server unavailable during an attack.

A vulnerability of Uncontrolled Resource Consumption has been identified in STARDOM provided by Yokogawa Electric Corporation. This vulnerability may allow to a remote attacker to cause a denial-of-service condition to the FCN/FCJ controller by sending a crafted packet. While sending the packet, the maintenance homepage of the controller could not be accessed. Therefore, functions of the maintenance homepage, changing configuration, viewing logs, etc. are not available. But the controller’s operation is not stopped by the condition. The affected products and versions are as follows: STARDOM FCN/FCJ R1.01 to R4.31.

cmark-gfm is GitHub's fork of cmark, a CommonMark parsing and rendering library and program in C. A polynomial time complexity issue in cmark-gfm may lead to unbounded resource exhaustion and subsequent denial of service. This CVE covers quadratic complexity issues when parsing text which leads with either large numbers of `>` or `-` characters. This issue has been addressed in version 0.29.0.gfm.10. Users are advised to upgrade. Users unable to upgrade should validate that their input comes from trusted sources.

An issue was discovered in OWASP ModSecurity Core Rule Set (CRS) through 3.1.0. /rules/REQUEST-932-APPLICATION-ATTACK-RCE.conf allows remote attackers to cause a denial of service (ReDOS) by entering a specially crafted string with nested repetition operators. NOTE: the software maintainer disputes that this is a vulnerability because the issue cannot be exploited via ModSecurity

An issue was discovered in OWASP ModSecurity Core Rule Set (CRS) through 3.1.0. /rules/REQUEST-933-APPLICATION-ATTACK-PHP.conf allows remote attackers to cause a denial of service (ReDOS) by entering a specially crafted string with $a# at the beginning and nested repetition operators. NOTE: the software maintainer disputes that this is a vulnerability because the issue cannot be exploited via ModSecurity

Dell PowerScale nodes A200, A2000, H400, H500, H600, H5600, F800, F810 integrated hardware management software contains an uncontrolled resource consumption vulnerability. This may allow an unauthenticated network host to impair built-in hardware management functionality and trigger OneFS data protection mechanism causing a denial of service.

Marked is an open-source markdown parser and compiler (npm package "marked"). In marked from version 1.1.1 and before version 2.0.0, there is a Regular expression Denial of Service vulnerability. This vulnerability can affect anyone who runs user generated code through marked. This vulnerability is fixed in version 2.0.0.

For certain systems running EOS, a Precision Time Protocol (PTP) packet of a management/signaling message with an invalid Type-Length-Value (TLV) causes the PTP agent to restart. Repeated restarts of the service will make the service unavailable.

Vulnerability in the Oracle Health Sciences InForm product of Oracle Health Sciences Applications (component: Core). Supported versions that are affected are Prior to 6.3.1.3 and Prior to 7.0.0.1. Easily exploitable vulnerability allows unauthenticated attacker with network access via HTTP to compromise Oracle Health Sciences InForm. Successful attacks of this vulnerability can result in unauthorized ability to cause a partial denial of service (partial DOS) of Oracle Health Sciences InForm. CVSS 3.1 Base Score 5.3 (Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L).

A vulnerability was determined in Open5GS up to 2.7.7. Affected by this issue is the function pcf_sess_set_ipv6prefix of the file /src/pcf/context.c of the component PCF. Executing a manipulation of the argument SmPolicyContextData.ipv6AddressPrefix can lead to denial of service. It is possible to launch the attack remotely. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way.

uap-core in an open-source npm package which contains the core of BrowserScope's original user agent string parser. In uap-core before version 0.11.0, some regexes are vulnerable to regular expression denial of service (REDoS) due to overlapping capture groups. This allows remote attackers to overload a server by setting the User-Agent header in an HTTP(S) request to maliciously crafted long strings. This is fixed in version 0.11.0. Downstream packages such as uap-python, uap-ruby etc which depend upon uap-core follow different version schemes.

In Apache HTTP server versions 2.4.37 and prior, by sending request bodies in a slow loris way to plain resources, the h2 stream for that request unnecessarily occupied a server thread cleaning up that incoming data. This affects only HTTP/2 (mod_http2) connections.

A vulnerability has been found in osrg GoBGP up to 4.3.0. This impacts the function SRv6L3ServiceAttribute.DecodeFromBytes of the file pkg/packet/bgp/prefix_sid.go of the component SRv6 L3 Service. Such manipulation of the argument data leads to denial of service. The attack may be performed from remote. Upgrading to version 4.4.0 will fix this issue. The name of the patch is f9f7b55ec258e514be0264871fa645a2c3edad11. You should upgrade the affected component.