Tenda AC10 V1.0 V15.03.06.23 has a command injection vulnerablility located in the formexeCommand function. The str variable receives the cmdinput parameter from a POST request and is later assigned to the cmd_buf variable, which is directly used in the doSystemCmd function, causing an arbitrary command execution.

Tenda AC15 v15.03.05.19 is vulnerable to Command Injection via the handler function in /goform/telnet.

DVR firmware in TAT-76 and TAT-77 series of products, provided by TONNET do not properly verify patch files. Attackers can inject a specific command into a patch file and gain access to the system.

An attacker may inject commands via specially-crafted post requests.

Multiple Improper Input Validation vulnerabilities in UniFi Connect EV Station Lite may allow a Command Injection by a malicious actor with network access to the UniFi Connect EV Station Lite. Affected Products: UniFi Connect EV Station Lite (Version 1.5.1 and earlier) Mitigation: Update UniFi Connect EV Station Lite to Version 1.5.2 or later

Adobe Digital Editions versions 4.5.10 and below have a command injection vulnerability. Successful exploitation could lead to arbitrary code execution.

An OS command injection vulnerability exists in the sysupgrade command injection functionality of Robustel R1510 3.1.16 and 3.3.0. A specially-crafted network request can lead to arbitrary command execution. An attacker can send a sequence of requests to trigger this vulnerability.

RE11S v1.11 was discovered to contain a command injection vulnerability via the component /goform/formAccept.

A command injection vulnerability in the web interface of Adtran 411 ONT L80.00.0011.M2 allows attackers to escalate privileges to root and execute arbitrary commands.

Tenda ac9 v1.0 firmware v15.03.05.19 is vulnerable to command injection in /goform/SetSambaCfg, which may lead to remote arbitrary code execution.

A vulnerability was found in trampgeek jobe up to 1.6.x and classified as critical. This issue affects the function run_in_sandbox of the file application/libraries/LanguageTask.php. The manipulation leads to command injection. Upgrading to version 1.7.0 is able to address this issue. The identifier of the patch is 8f43daf50c943b98eaf0c542da901a4a16e85b02. It is recommended to upgrade the affected component. The identifier VDB-217553 was assigned to this vulnerability.

A vulnerability was found in hzmanyun Education and Training System 2.1. It has been rated as critical. Affected by this issue is the function exportPDF of the file /user/exportPDF. The manipulation of the argument id leads to command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.

A vulnerability classified as critical was found in TOTOLINK EX1800T 9.1.0cu.2112_B20220316. This vulnerability affects the function setRebootScheCfg of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument mode/week/minute/recHour leads to os command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used.

tj-actions/changed-files is a Github action to retrieve all files and directories. Prior to 41.0.0, the `tj-actions/changed-files` workflow allows for command injection in changed filenames, allowing an attacker to execute arbitrary code and potentially leak secrets. This issue may lead to arbitrary command execution in the GitHub Runner. This vulnerability has been addressed in version 41.0.0. Users are advised to upgrade.

A vulnerability was found in TOTOLINK EX1800T 9.1.0cu.2112_B20220316. It has been rated as critical. Affected by this issue is the function setWiFiExtenderConfig of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument apcliKey/key leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.

A vulnerability classified as critical has been found in TOTOLINK EX1800T 9.1.0cu.2112_B20220316. This affects the function setDmzCfg of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument ip leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used.

A vulnerability classified as critical has been found in hzmanyun Education and Training System 2.1.3. This affects the function scorm of the file UploadImageController.java. The manipulation of the argument param leads to command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used.

A security flaw has been discovered in Edimax BR-6208AC 1.02/1.03. Affected by this vulnerability is the function formRoute of the file /gogorm/formRoute of the component Web-based Configuration Interface. The manipulation of the argument strIp/strMask/strGateway results in command injection. The attack can be executed remotely. The exploit has been released to the public and may be used for attacks. Edimax confirms this issue: "The product mentioned, EDIMAX BR-6208AC V2, has reached its End of Life (EOL) status. It is no longer supported or maintained by Edimax, and it is no longer available for purchase in the market. Consequently, there will be no further firmware updates or patches for this device. We recommend users upgrade to newer models for better security." This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability was determined in Sangfor Operation and Maintenance Management System up to 3.0.8. Impacted is the function WriterHandle.getCmd of the file /isomp-protocol/protocol/getCmd. This manipulation of the argument sessionPath causes os command injection. Remote exploitation of the attack is possible. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability has been found in Sangfor Operation and Maintenance Management System up to 3.0.8. This vulnerability affects the function uploadCN of the file VersionController.java. The manipulation of the argument filename leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability classified as critical was found in hzmanyun Education and Training System 3.1.1. Affected by this vulnerability is the function pdf2swf of the file /pdf2swf. The manipulation of the argument file leads to os command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used.

A vulnerability, that could result in Remote Code Execution (RCE), has been found in PlotAI. Lack of validation of LLM-generated output allows attacker to execute arbitrary Python code. Vendor commented out vulnerable line, further usage of the software requires uncommenting it and thus accepting the risk. The vendor does not plan to release a patch to fix this vulnerability.

A vulnerability was found in Sangfor Operation and Maintenance Management System up to 3.0.8. This issue affects some unknown processing of the file /isomp-protocol/protocol/getHis of the component HTTP POST Request Handler. The manipulation of the argument sessionPath results in os command injection. The attack may be launched remotely. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability has been found in ESAFENET DSM 3.1.2 and classified as critical. Affected by this vulnerability is the function examExportPDF of the file /admin/plan/examExportPDF. The manipulation of the argument s leads to command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in LB-LINK AC1900 Router 1.0.2 and classified as critical. Affected by this issue is the function websGetVar of the file /goform/set_blacklist. The manipulation of the argument mac/enable leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was determined in Tenda WH450 1.0.0.18. This impacts an unknown function of the file /goform/CheckTools of the component HTTP Request Handler. Executing a manipulation of the argument ipaddress can lead to command injection. The attack can be launched remotely. The exploit has been publicly disclosed and may be utilized.

A vulnerability, which was classified as critical, was found in LB-LINK AC1900 Router 1.0.2. Affected is the function websGetVar of the file /goform/set_manpwd. The manipulation of the argument routepwd  leads to os command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was determined in TOTOLINK X5000R 9.1.0cu.2089_B20211224. Affected by this issue is the function snprintf of the file /cgi-bin/cstecgi.cgi?action=exportOvpn&type=user. This manipulation of the argument User causes os command injection. Remote exploitation of the attack is possible. The exploit has been publicly disclosed and may be utilized.

A flaw has been found in ADSLR NBR1005GPEV2 250814-r037c. This affects the function ap_macfilter_add of the file /send_order.cgi. Executing manipulation of the argument mac can lead to command injection. The attack may be performed from remote. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in ADSLR NBR1005GPEV2 250814-r037c. This issue affects the function set_mesh_disconnect of the file /send_order.cgi. The manipulation of the argument mac results in command injection. It is possible to launch the attack remotely. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was determined in Shiguangwu sgwbox N3 2.0.25. This affects an unknown function of the component SHARESERVER Feature. This manipulation of the argument params causes command injection. The attack can be initiated remotely. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability has been found in ADSLR NBR1005GPEV2 250814-r037c. This vulnerability affects the function ap_macfilter_del of the file /send_order.cgi. The manipulation of the argument mac leads to command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was identified in Shiguangwu sgwbox N3 2.0.25. This impacts an unknown function of the file /usr/sbin/http_eshell_server of the component NETREBOOT Interface. Such manipulation leads to command injection. The attack can be launched remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was detected in ADSLR B-QE2W401 250814-r037c. Affected by this issue is the function parameterdel_swifimac of the file /send_order.cgi. Performing manipulation of the argument del_swifimac results in command injection. The attack is possible to be carried out remotely. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was detected in Edimax BR-6478AC V3 1.0.15. Impacted is the function sub_416990 of the file /boafrm/formTracerouteDiagnosticRun. The manipulation of the argument host results in os command injection. The attack can be launched remotely. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was determined in Sangfor Operation and Maintenance Security Management System 3.0. Impacted is an unknown function of the file /fort/portal_login of the component Frontend. This manipulation of the argument loginUrl causes command injection. The attack may be initiated remotely. The exploit has been publicly disclosed and may be utilized. Upgrading to version 3.0.11 and 3.0.12 is recommended to address this issue. It is advisable to upgrade the affected component.

A command injection vulnerability has been reported to affect QTS and QuTS hero. If exploited, this vulnerability allows attackers to execute arbitrary commands in a compromised application. We have already fixed this vulnerability in the following versions: QTS 4.5.2.1566 Build 20210202 and later QTS 4.5.1.1495 Build 20201123 and later QTS 4.3.6.1620 Build 20210322 and later QTS 4.3.4.1632 Build 20210324 and later QTS 4.3.3.1624 Build 20210416 and later QTS 4.2.6 Build 20210327 and later QuTS hero h4.5.1.1491 build 20201119 and later

Improper Input Validation vulnerability in Honeywell PM43 on 32 bit, ARM (Printer web page modules) allows Command Injection.This issue affects PM43 versions prior to P10.19.050004. Update to the latest available firmware version of the respective printers to version MR19.5 (e.g. P10.19.050006).

A flaw has been found in Edimax BR-6478AC V3 1.0.15. The affected element is the function sub_44CCE4 of the file /boafrm/formSysCmd. This manipulation of the argument sysCmd causes os command injection. The attack may be initiated remotely. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A security vulnerability has been detected in UTT 进取 750W up to 3.2.2-191225. Affected by this vulnerability is the function system of the file /goform/formPdbUpConfig. Such manipulation of the argument policyNames leads to command injection. The attack may be launched remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was identified in D-Link DIR-852 1.00. This issue affects some unknown processing of the file /gena.cgi. Such manipulation of the argument service leads to command injection. The attack can be executed remotely. The exploit is publicly available and might be used. This vulnerability only affects products that are no longer supported by the maintainer.

A security flaw has been discovered in Shiguangwu sgwbox N3 2.0.25. Affected is an unknown function of the file /usr/sbin/http_eshell_server of the component DOCKER Feature. Performing manipulation of the argument params results in command injection. The attack may be initiated remotely. The exploit has been released to the public and may be exploited. The vendor was contacted early about this disclosure but did not respond in any way.

Tenda i29 v1.0 V1.0.0.5 was discovered to contain a command injection vulnerability via the pingSet function.

The vulnerability have been reported to affect earlier versions of QTS. If exploited, this command injection vulnerability could allow remote attackers to run arbitrary commands. This issue affects: QNAP Systems Inc. Helpdesk versions prior to 3.0.3.

The pdfinfojs NPM module versions <= 0.3.6 has a command injection vulnerability that allows an attacker to execute arbitrary commands on the victim's machine.

A command injection vulnerability in egg-scripts <v2.8.1 allows arbitrary shell command execution through a maliciously crafted command line argument.

A security vulnerability has been detected in D-Link DAP-2695 2.00RC13. The impacted element is the function sub_4174B0 of the component Firmware Update Handler. The manipulation leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed publicly and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A weakness has been identified in D-Link DIR-806A 100CNb11. Affected is the function ssdpcgi_main of the component SSDP Request Handler. This manipulation causes command injection. The attack can be initiated remotely. The exploit has been made available to the public and could be exploited. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability was detected in D-Link DAP-2695 2.00RC131. This affects the function fwupdater_main of the file rgbin of the component Firmware Update Handler. Performing manipulation results in os command injection. The attack may be initiated remotely. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability has been found in LB-LINK AC1900 Router 1.0.2 and classified as critical. Affected by this vulnerability is the function websGetVar of the file /goform/set_cmd. The manipulation of the argument cmd leads to os command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.