Honeywell HDZP252DI 1.00.HW02.4 and HBW2PER1 1.000.HW01.3 devices allow a video replay attack after ARP cache poisoning has been achieved.

Honeywell ControlEdge through R151.1 uses Hard-coded Credentials. According to FSCT-2022-0056, there is a Honeywell ControlEdge hardcoded credentials issue. The affected components are characterized as: SSH. The potential impact is: Remote code execution, manipulate configuration, denial of service. The Honeywell ControlEdge PLC and RTU product line exposes an SSH service on port 22/TCP. Login as root to this service is permitted and credentials for the root user are hardcoded without automatically changing them upon first commissioning. The credentials for the SSH service are hardcoded in the firmware. The credentials grant an attacker access to a root shell on the PLC/RTU, allowing for remote code execution, configuration manipulation and denial of service.

The affected products are vulnerable to an unauthenticated API endpoint exposure, which may allow an attacker to remotely change the "forgot password" recovery email address.

Honeywell Experion PKS C200, C200E, C300, and ACE controllers are vulnerable to improper neutralization of special elements in output, which may allow an attacker to remotely execute arbitrary code and cause a denial-of-service condition.

LenelS2 NetBox access control and event monitoring system was discovered to contain an unauthenticated RCE in versions prior to and including 5.6.1, which allows an attacker to execute malicious commands with elevated permissions.

LenelS2 NetBox access control and event monitoring system was discovered to contain Hardcoded Credentials in versions prior to and including 5.6.1 which allows an attacker to bypass authentication requirements.

Honeywell Experion PKS Safety Manager (SM and FSC) through 2022-05-06 has Insufficient Verification of Data Authenticity. According to FSCT-2022-0053, there is a Honeywell Experion PKS Safety Manager insufficient logic security controls issue. The affected components are characterized as: Honeywell FSC runtime (FSC-CPU, QPP), Honeywell Safety Builder. The potential impact is: Remote Code Execution, Denial of Service. The Honeywell Experion PKS Safety Manager family of safety controllers utilize the unauthenticated Safety Builder protocol (FSCT-2022-0051) for engineering purposes, including downloading projects and control logic to the controller. Control logic is downloaded to the controller on a block-by-block basis. The logic that is downloaded consists of FLD code compiled to native machine code for the CPU module (which applies to both the Safety Manager and FSC families). Since this logic does not seem to be cryptographically authenticated, it allows an attacker capable of triggering a logic download to execute arbitrary machine code on the controller's CPU module in the context of the runtime. While the researchers could not verify this in detail, the researchers believe that the microprocessor underpinning the FSC and Safety Manager CPU modules is incapable of offering memory protection or privilege separation capabilities which would give an attacker full control of the CPU module. There is no authentication on control logic downloaded to the controller. Memory protection and privilege separation capabilities for the runtime are possibly lacking. The researchers confirmed the issues in question on Safety Manager R145.1 and R152.2 but suspect the issue affects all FSC and SM controllers and associated Safety Builder versions regardless of software or firmware revision. An attacker who can communicate with a Safety Manager controller via the Safety Builder protocol can execute arbitrary code without restrictions on the CPU module, allowing for covert manipulation of control operations and implanting capabilities similar to the TRITON malware (MITRE ATT&CK software ID S1009). A mitigating factor with regards to some, but not all, of the above functionality is that these require the Safety Manager physical keyswitch to be in the right position.

** UNSUPPORTED WHEN ASSIGNED ** [An attacker can capture an authenticating hash and utilize it to create new sessions. The hash is also a poorly salted MD5 hash, which could result in a successful brute force password attack. Impacted product is BCM-WEB version 3.3.X. Recommended fix: Upgrade to a supported product such as Alerton ACM.] Out of an abundance of caution, this CVE ID is being assigned to better serve our customers and ensure all who are still running this product understand that the product is end of life and should be removed or upgraded. 

Controller may be loaded with malicious firmware which could enable remote code execution. See Honeywell Security Notification for recommendations on upgrading and versioning.

Controller DoS may occur due to buffer overflow when an error is generated in response to a specially crafted message. See Honeywell Security Notification for recommendations on upgrading and versioning.

Server or Console Station DoS due to heap overflow occurring during the handling of a specially crafted message for a specific configuration operation.  See Honeywell Security Notification for recommendations on upgrading and versioning.

Controller DoS due to stack overflow when decoding a message from the server.  See Honeywell Security Notification for recommendations on upgrading and versioning.

The following versions of MAXPRO VMS and NVR, MAXPRO VMS:HNMSWVMS prior to Version VMS560 Build 595 T2-Patch, HNMSWVMSLT prior to Version VMS560 Build 595 T2-Patch, MAXPRO NVR: MAXPRO NVR XE prior to Version NVR 5.6 Build 595 T2-Patch, MAXPRO NVR SE prior to Version NVR 5.6 Build 595 T2-Patch, MAXPRO NVR PE prior to Version NVR 5.6 Build 595 T2-Patch, and MPNVRSWXX prior to Version NVR 5.6 Build 595 T2-Patch contain an SQL injection vulnerability that could give an attacker remote unauthenticated access to the web user interface with administrator-level privileges.

The following versions of MAXPRO VMS and NVR, MAXPRO VMS:HNMSWVMS prior to Version VMS560 Build 595 T2-Patch, HNMSWVMSLT prior to Version VMS560 Build 595 T2-Patch, MAXPRO NVR: MAXPRO NVR XE prior to Version NVR 5.6 Build 595 T2-Patch, MAXPRO NVR SE prior to Version NVR 5.6 Build 595 T2-Patch, MAXPRO NVR PE prior to Version NVR 5.6 Build 595 T2-Patch, and MPNVRSWXX prior to Version NVR 5.6 Build 595 T2-Patch are vulnerable to an unsafe deserialization of untrusted data. An attacker may be able to remotely modify deserialized data without authentication using a specially crafted web request, resulting in remote code execution.

Honeywell Notifier Web Server (NWS) Version 3.50 is vulnerable to a path traversal attack, which allows an attacker to bypass access to restricted directories. Honeywell has released a firmware update to address the problem.

The affected product is vulnerable to a heap-based buffer overflow, which may allow an attacker to manipulate memory with controlled values and remotely execute code on the OPC UA Tunneller (versions prior to 6.3.0.8233).

Experion server DoS due to heap overflow occurring during the handling of a specially crafted message for a specific configuration operation.  See Honeywell Security Notification for recommendations on upgrading and versioning.

Honeywell equIP series and Performance series IP cameras and recorders, A vulnerability exists in the affected products where IP cameras and recorders have a potential replay attack vulnerability as a weak authentication method is retained for compatibility with legacy products.

An issue was discovered in Honeywell Experion Process Knowledge System (PKS) platform: Experion PKS, Release 3xx and prior, Experion PKS, Release 400, Experion PKS, Release 410, Experion PKS, Release 430, and Experion PKS, Release 431. Experion PKS does not properly validate input. By sending a specially crafted packet, an attacker could cause the process to terminate. A successful exploit would prevent firmware uploads to the Series-C devices.

Honeywell OneWireless Wireless Device Manager (WDM) for the following versions R310.x, R320.x, R321.x, R322.1, R322.2, R323.x, R330.1 contains a command injection vulnerability. An attacker who is authenticated could use the firmware update process to potentially exploit the vulnerability, leading to a command injection. Honeywell recommends updating to R322.3, R330.2 or the most recent version of this product2.

Server receiving a malformed message to create a new connection could lead to an attacker performing remote code execution or causing a failure. See Honeywell Security Notification for recommendations on upgrading and versioning.

An attacker having physical access to WDM can plug USB device to gain access and execute unwanted commands. A malicious user could enter a system command along with a backup configuration, which could result in the execution of unwanted commands. This issue affects OneWireless all versions up to 322.1 and fixed in version 322.2.

A file inclusion vulnerability exists in the confd.exe module in Honeywell Experion PKS R40x before R400.6, R41x before R410.6, and R43x before R430.2, which could lead to accepting an arbitrary file into the function, and potential information disclosure or remote code execution. Honeywell strongly encourages and recommends all customers running unsupported versions of EKPS prior to R400 to upgrade to a supported version.

Honeywell equIP series IP cameras Multiple equIP Series Cameras, A vulnerability exists in the affected products where a specially crafted HTTP packet request could result in a denial of service.

A security vulnerability has been detected in Totolink A8000RU 7.1cu.643_b20200521. Impacted is the function setWiFiWpsCfg of the file /cgi-bin/cstecgi.cgi of the component Web Management Interface. Such manipulation of the argument wscDisabled leads to os command injection. The attack may be launched remotely. The exploit has been disclosed publicly and may be used.

A security flaw has been discovered in Totolink A8000RU 7.1cu.643_b20200521. This impacts the function setGameSpeedCfg of the file /cgi-bin/cstecgi.cgi of the component Web Management Interface. Performing a manipulation of the argument enable results in os command injection. Remote exploitation of the attack is possible. The exploit has been released to the public and may be used for attacks.

A weakness has been identified in Totolink A8000RU 7.1cu.643_b20200521. This issue affects the function setMacFilterRules of the file /cgi-bin/cstecgi.cgi of the component Web Management Interface. This manipulation of the argument enable causes os command injection. The attack may be initiated remotely. The exploit has been made available to the public and could be used for attacks.

A security flaw has been discovered in Totolink A8000RU 7.1cu.643_b20200521. This issue affects the function setAccessDeviceCfg of the file /cgi-bin/cstecgi.cgi of the component Web Management Interface. Performing a manipulation of the argument mac results in os command injection. The attack is possible to be carried out remotely. The exploit has been released to the public and may be used for attacks.

A vulnerability was detected in Totolink A8000RU 7.1cu.643_b20200521. The affected element is the function setQosCfg of the file /cgi-bin/cstecgi.cgi of the component Web Management Interface. Performing a manipulation of the argument enable results in os command injection. Remote exploitation of the attack is possible. The exploit is now public and may be used.

A vulnerability was identified in Totolink A8000RU 7.1cu.643_b20200521. The impacted element is the function setWanCfg of the file /cgi-bin/cstecgi.cgi of the component Web Management Interface. Such manipulation of the argument enabled leads to os command injection. The attack may be performed from remote. The exploit is publicly available and might be used.

A vulnerability was identified in Totolink A8000RU 7.1cu.643_b20200521. This affects the function setDdnsCfg of the file /cgi-bin/cstecgi.cgi of the component Web Management Interface. Such manipulation of the argument provider leads to os command injection. The attack may be launched remotely. The exploit is publicly available and might be used.

A vulnerability was found in Totolink A8000RU 7.1cu.643_b20200521. This vulnerability affects the function setDiagnosisCfg of the file /cgi-bin/cstecgi.cgi of the component Web Management Interface. The manipulation of the argument ip results in os command injection. The attack can be executed remotely. The exploit has been made public and could be used.

A security flaw has been discovered in Totolink A8000RU 7.1cu.643_b20200521. The affected element is the function setUpgradeFW of the file /cgi-bin/cstecgi.cgi of the component Web Management Interface. Performing a manipulation of the argument resetFlags results in os command injection. It is possible to initiate the attack remotely. The exploit has been released to the public and may be used for attacks.

VMware View Planner 4.x prior to 4.6 Security Patch 1 contains a remote code execution vulnerability. Improper input validation and lack of authorization leading to arbitrary file upload in logupload web application. An unauthorized attacker with network access to View Planner Harness could upload and execute a specially crafted file leading to remote code execution within the logupload container.

A vulnerability has been found in Totolink N300RH 6.1c.1353_B20190305. Affected is the function setPasswordCfg of the file /cgi-bin/cstecgi.cgi of the component Web Management Interface. Such manipulation of the argument admpass leads to os command injection. The attack can be executed remotely. The exploit has been disclosed to the public and may be used.

A security flaw has been discovered in Totolink A8000RU 7.1cu.643_b20200521. This vulnerability affects the function setWiFiAdvancedCfg of the file /cgi-bin/cstecgi.cgi of the component Web Management Interface. The manipulation of the argument bgProtection results in os command injection. The attack can be launched remotely. The exploit has been released to the public and may be used for attacks.

A vulnerability was determined in Totolink A8000RU 7.1cu.643_b20200521. This affects the function setIpQosRules of the file /cgi-bin/cstecgi.cgi of the component Web Management Interface. This manipulation of the argument Comment causes os command injection. Remote exploitation of the attack is possible. The exploit has been publicly disclosed and may be utilized.

A flaw has been found in Totolink A8000RU 7.1cu.643_b20200521. This vulnerability affects the function setOpenVpnCertGenerationCfg of the file /cgi-bin/cstecgi.cgi of the component Web Management Interface. Executing a manipulation of the argument servername can lead to os command injection. The attack may be launched remotely. The exploit has been published and may be used.

A vulnerability was detected in D-Link DAP-2695 2.00RC131. This affects the function fwupdater_main of the file rgbin of the component Firmware Update Handler. Performing manipulation results in os command injection. The attack may be initiated remotely. This vulnerability only affects products that are no longer supported by the maintainer.

A security flaw has been discovered in Tenda AC6 15.03.06.49_multi_TDE01. Affected is the function fromSetWirelessRepeat of the file /goform/WifiExtraSet of the component httpd. Performing a manipulation of the argument mac/ssid results in os command injection. It is possible to initiate the attack remotely. The exploit has been released to the public and may be used for attacks.

TOTOLINK LR350 V9.3.5u.6369_B20220309 was discovered to contain a command injection vulnerability via the ussd parameter in the setUssd function.

A flaw has been found in Totolink A8000RU 7.1cu.643_b20200521. The impacted element is the function setL2tpServerCfg of the file /cgi-bin/cstecgi.cgi of the component Web Management Interface. Executing a manipulation of the argument enable can lead to os command injection. The attack can be executed remotely. The exploit has been published and may be used.

A weakness has been identified in Totolink A8000RU 7.1cu.643_b20200521. Affected is the function setRemoteCfg of the file /cgi-bin/cstecgi.cgi of the component Web Management Interface. Executing a manipulation of the argument enable can lead to os command injection. The attack can be executed remotely. The exploit has been made available to the public and could be used for attacks.