Snipe-IT through 6.0.14 allows attackers to check whether a user account exists because of response variations in a /password/reset request.

Jenkins Generic Webhook Trigger Plugin 1.84.1 and earlier uses a non-constant time comparison function when checking whether the provided and expected webhook token are equal, potentially allowing attackers to use statistical methods to obtain a valid webhook token.

In CentOS-WebPanel.com (aka CWP) CentOS Web Panel 0.9.8.846, the Login process allows attackers to check whether a username is valid by reading the HTTP response.

Jenkins GitLab Plugin 1.5.35 and earlier uses a non-constant time comparison function when checking whether the provided and expected webhook token are equal, potentially allowing attackers to use statistical methods to obtain a valid webhook token.

A user enumeration vulnerability exists in the login functionality of Ghost Foundation Ghost 5.9.4. A specially-crafted HTTP request can lead to a disclosure of sensitive information. An attacker can send a series of HTTP requests to trigger this vulnerability.

NVIDIA BMC contains a vulnerability in IPMI handler, where an unauthorized attacker can use certain oracles to guess a valid BMC username, which may lead to an information disclosure.

An issue was discovered in MediaWiki before 1.35.8, 1.36.x and 1.37.x before 1.37.5, and 1.38.x before 1.38.3. HTMLUserTextField exposes the existence of hidden users.

The authentication method in Laravel 8.x through 9.x before 9.32.0 was discovered to be vulnerable to user enumeration via timeless timing attacks with HTTP/2 multiplexing. This is caused by the early return inside the hasValidCredentials method in the Illuminate\Auth\SessionGuard class when a user is found to not exist.

The Splunk Enterprise REST API allows enumeration of usernames via the lockout error message. The potential vulnerability impacts Splunk Enterprise instances before 8.1.7 when configured to repress verbose login errors.

Kirby is a Content Management System. Prior to versions 3.5.8.2, 3.6.6.2, 3.7.5.1, and 3.8.1, a user enumeration vulnerability affects all Kirby sites with user accounts unless Kirby's API and Panel are disabled in the config. It can only be exploited for targeted attacks because the attack does not scale to brute force. The problem has been patched in Kirby 3.5.8.2, Kirby 3.6.6.2, Kirby 3.7.5.1, and Kirby 3.8.1. In all of the mentioned releases, the maintainers have rewritten the affected code so that the delay is also inserted after the brute force limit is reached.

In Directus 8.x through 8.8.1, an attacker can discover whether a user is present in the database through the password reset feature. NOTE: This vulnerability only affects products that are no longer supported by the maintainer

Shenzhen Guoxin Synthesis image system before 8.3.0 allows username enumeration because of the response discrepancy of incorrect versus error.

Umbraco is a free and open source .NET content management system. Starting in version 14.0.0 and prior to versions 14.3.2 and 15.1.2, it's possible to determine whether an account exists based on an analysis of response codes and timing of Umbraco management API responses. Versions 14.3.2 and 15.1.2 contain a patch. No known workarounds are available.

A vulnerability in the login functionality of the web application of ctrlX OS allows a remote unauthenticated attacker to guess valid usernames via multiple crafted HTTP requests.

A vulnerability in the External Interface of OTRS allows conclusions to be drawn about the existence of user accounts through different HTTP response codes and messages. This enables an attacker to systematically identify valid email addresses. This issue affects: * OTRS 7.0.X * OTRS 8.0.X * OTRS 2023.X * OTRS 2024.X * OTRS 2025.X

In Splunk Enterprise versions below 9.2.2, 9.1.5, and 9.0.10 and Splunk Cloud Platform versions below 9.1.2312.109, an attacker could determine whether or not another user exists on the instance by deciphering the error response that they would likely receive from the instance when they attempt to log in. This disclosure could then lead to additional brute-force password-guessing attacks. This vulnerability would require that the Splunk platform instance uses the Security Assertion Markup Language (SAML) authentication scheme.

IBM Security Identity Manager 7.0.2 could allow a remote user to enumerate usernames due to a difference of responses from valid and invalid login attempts. IBM X-Force ID: 200018

SAP NetWeaver Server ABAP allows an unauthenticated attacker to exploit a vulnerability that causes the server to respond differently based on the existence of a specified user, potentially revealing sensitive information. This issue does not enable data modification and has no impact on server availability.

vantage6 is a privacy preserving federated learning infrastructure for secure insight exchange. vantage6 does not inform the user of wrong username/password combination if the username actually exists. This is an attempt to prevent bots from obtaining usernames. However, if a wrong password is entered a number of times, the user account is blocked temporarily. This issue has been fixed in version 3.8.0.

Flask-AppBuilder is a development framework, built on top of Flask. User enumeration in database authentication in Flask-AppBuilder <= 3.2.3. Allows for a non authenticated user to enumerate existing accounts by timing the response time from the server when you are logging in. Upgrade to version 3.3.0 or higher to resolve.

A CWE-204 "Observable Response Discrepancy" in the login page in Q-Free MaxTime less than or equal to version 2.11.0 allows an unauthenticated remote attacker to enumerate valid usernames via crafted HTTP requests.

Variable response times in the AWS Sign-in IAM user login flow allowed for the use of brute force enumeration techniques to identify valid IAM usernames in an arbitrary AWS account.

IBM Security Verify Access Appliance and Docker 10.0 through 10.0.8 could allow a remote attacker to enumerate usernames due to an observable response discrepancy of disabled accounts.

By checking the result of calls to `window.open` with specifically set protocol handlers, an attacker could determine if the application which implements that protocol handler is installed. This vulnerability affects Firefox < 131, Firefox ESR < 128.3, Thunderbird < 128.3, and Thunderbird < 131.

A vulnerability in NetCat CMS allows an attacker to send a specially crafted http request that can be used to check whether a user exists in the system, which could be a basis for further attacks. This issue affects NetCat CMS v. 6.4.0.24126.2 and possibly others. Apply patch from vendor https://netcat.ru/ https://netcat.ru/] . Versions 6.4.0.24248 and on have the patch.

A website was able to detect when a user took a screenshot of a page using the built-in Screenshot functionality in Firefox. This vulnerability affects Firefox < 127.

User Enumeration via Discrepancies in Error Messages in the Celk Sistemas Celk Saude v.3.1.252.1 password recovery functionality which allows a remote attacker to enumerate users through discrepancies in the responses.

An issue was discovered in Kurmi Provisioning Suite before 7.9.0.35, 7.10.x through 7.10.0.18, and 7.11.x through 7.11.0.15. An Observable Response Discrepancy vulnerability in the sendPasswordReinitLink action of the unlogged.do page allows remote attackers to test whether a username is valid or not. This allows confirmation of valid usernames.

Accounts enumeration vulnerability in the Login Component of Reolink Duo 2 WiFi Camera (Firmware Version v3.0.0.1889_23031701) allows remote attackers to determine valid user accounts via login attempts. This can lead to the enumeration of user accounts and potentially facilitate other attacks, such as brute-forcing of passwords. The vulnerability arises from the application responding differently to login attempts with valid and invalid usernames.

Pritunl 1.29.2145.25 allows attackers to enumerate valid VPN usernames via a series of /auth/session login attempts. Initially, the server will return error 401. However, if the username is valid, then after 20 login attempts, the server will start responding with error 400. Invalid usernames will receive error 401 indefinitely. Note: This has been disputed by the vendor as not a vulnerability. They argue that this is an intended design

Zitadel is an open source identity management system. ZITADEL administrators can enable a setting called "Ignoring unknown usernames" which helps mitigate attacks that try to guess/enumerate usernames. If enabled, ZITADEL will show the password prompt even if the user doesn't exist and report "Username or Password invalid". Due to a implementation change to prevent deadlocks calling the database, the flag would not be correctly respected in all cases and an attacker would gain information if an account exist within ZITADEL, since the error message shows "object not found" instead of the generic error message. This vulnerability is fixed in 2.58.1, 2.57.1, 2.56.2, 2.55.5, 2.54.8, and 2.53.9.

In veilid-core in Veilid before 0.3.4, the protocol's ping function can be misused in a way that decreases the effectiveness of safety and private routes.

IBM TXSeries for Multiplatforms 10.1 could allow an attacker to determine valid usernames due to an observable timing discrepancy which could be used in further attacks against the system.

In the Twilio Authy API, accessed by Authy Android before 25.1.0 and Authy iOS before 26.1.0, an unauthenticated endpoint provided access to certain phone-number data, as exploited in the wild in June 2024. Specifically, the endpoint accepted a stream of requests containing phone numbers, and responded with information about whether each phone number was registered with Authy. (Authy accounts were not compromised, however.)

Kaiten 57.128.8 allows remote attackers to enumerate user accounts via a crafted POST request, because a login response contains a user_email field only if the user account exists.

web-auth/webauthn-lib is an open source set of PHP libraries and a Symfony bundle to allow developers to integrate that authentication mechanism into their web applications. The ProfileBasedRequestOptionsBuilder method returns allowedCredentials without any credentials if no username was found. When WebAuthn is used as the first or only authentication method, an attacker can enumerate usernames based on the absence of the `allowedCredentials` property in the assertion options response. This allows enumeration of valid or invalid usernames. By knowing which usernames are valid, attackers can focus their efforts on a smaller set of potential targets, increasing the efficiency and likelihood of successful attacks. This issue has been addressed in version 4.9.0 and all users are advised to upgrade. There are no known workarounds for this vulnerability.

Matrix Tafnit v8 - CWE-204: Observable Response Discrepancy

An observable response discrepancy vulnerability [CWE-204] in FortiClientEMS 7.4.0, 7.2.0 through 7.2.4, 7.0 all versions, and FortiSOAR 7.5.0, 7.4.0 through 7.4.4, 7.3.0 through 7.3.2, 7.2 all versions, 7.0 all versions, 6.4 all versions may allow an unauthenticated attacker to enumerate valid users via observing login request responses.

User enumeration vulnerability in ORDAT FOSS-Online before v2.24.01 allows attackers to determine if an account exists in the application by comparing the server responses of the forgot password functionality.

IBM Control Center 6.2.1 and 6.3.1 could allow a remote attacker to enumerate usernames due to an observable discrepancy between login attempts.

An issue was discovered in Logpoint before 7.4.0. An attacker can enumerate a valid list of usernames by observing the response time at the Forgot Password endpoint.

IBM i 7.2, 7.3, 7.4, and 7.5 Service Tools Server (SST) is vulnerable to SST user enumeration by a remote attacker. This vulnerability can be used by a malicious actor to gather information about SST users that can be targeted in further attacks. IBM X-Force ID: 287538.

In CentOS-WebPanel.com (aka CWP) CentOS Web Panel 0.9.8.848, the Login process allows attackers to check whether a username is valid by comparing response times.

In Logpoint before 7.4.0, an attacker can enumerate a valid list of usernames by using publicly exposed URLs of shared widgets.

User enumeration vulnerability in Liferay Portal 7.2.0 through 7.4.3.26, and older unsupported versions, and Liferay DXP 7.4 before update 27, 7.3 before update 8, 7.2 before fix pack 20, and older unsupported versions allows remote attackers to determine if an account exist in the application by comparing the request's response time.

Liferay Portal 7.2.0 through 7.4.1, and older unsupported versions, and Liferay DXP 7.3 before service pack 3, 7.2 before fix pack 18, and older unsupported versions returns with different responses depending on whether a site does not exist or if the user does not have permission to access the site, which allows remote attackers to discover the existence of sites by enumerating URLs. This vulnerability occurs if locale.prepend.friendly.url.style=2 and if a custom 404 page is used.

User enumeration can occur in the Authentication REST API in Delinea PAM Secret Server 11.4. This allows a remote attacker to determine whether a user is valid because of a difference in responses from the /oauth2/token endpoint.

OpenCRX before v5.2.2 was discovered to be vulnerable to password enumeration due to the difference in error messages received during a password reset which could enable an attacker to determine if a username, email or ID is valid.

An user enumeration vulnerability was found in SEO Panel 4.10.0. This issue occurs during user authentication, where a difference in error messages could allow an attacker to determine if a username is valid or not, enabling a brute-force attack with valid usernames.

Crypto++ (aka Cryptopp) 8.6.0 and earlier contains a timing leakage in MakePublicKey(). There is a clear correlation between execution time and private key length, which may cause disclosure of the length information of the private key. This might allow attackers to conduct timing attacks. NOTE: this report is disputed by the vendor and multiple third parties. The execution-time differences are intentional. A user may make a choice of a longer key as a tradeoff between strength and performance. In making this choice, the amount of information leaked to an adversary is of infinitesimal value