When a POST request comes through AJP and the request exceeds the max-post-size limit (maxEntitySize), Undertow's AjpServerRequestConduit implementation closes a connection without sending any response to the client/proxy. This behavior results in that a front-end proxy marking the backend worker (application server) as an error state and not forward requests to the worker for a while. In mod_cluster, this continues until the next STATUS request (10 seconds intervals) from the application server updates the server state. So, in the worst case, it can result in "All workers are in error state" and mod_cluster responds "503 Service Unavailable" for a while (up to 10 seconds). In mod_proxy_balancer, it does not forward requests to the worker until the "retry" timeout passes. However, luckily, mod_proxy_balancer has "forcerecovery" setting (On by default; this parameter can force the immediate recovery of all workers without considering the retry parameter of the workers if all workers of a balancer are in error state.). So, unlike mod_cluster, mod_proxy_balancer does not result in responding "503 Service Unavailable". An attacker could use this behavior to send a malicious request and trigger server errors, resulting in DoS (denial of service). This flaw was fixed in Undertow 2.2.19.Final, Undertow 2.3.0.Alpha2.

A vulnerability in the Cisco Fabric Services over IP (CFSoIP) feature of Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to insufficient validation of incoming CFSoIP packets. An attacker could exploit this vulnerability by sending crafted CFSoIP packets to an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition.

The vulnerabilities can be exploited to cause the web visualization component of the PLC to stop and not respond, leading to genuine users losing remote visibility of the PLC state. If a user attempts to login to the PLC while this vulnerability is exploited, the PLC will show an error state and refuse connections to Automation Builder. The execution of the PLC application is not affected by this vulnerability. This issue affects ABB AC500 V2 products with onboard Ethernet.

A vulnerability in the DNS inspection handler of Cisco Adaptive Security Appliance (ASA) Software and Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service condition (DoS) on an affected device. This vulnerability is due to a lack of proper processing of incoming requests. An attacker could exploit this vulnerability by sending crafted DNS requests at a high rate to an affected device. A successful exploit could allow the attacker to cause the device to stop responding, resulting in a DoS condition.

MaterialX is an open standard for the exchange of rich material and look-development content across applications and renderers. In version 1.39.2, nested imports of MaterialX files can lead to a crash via stack memory exhaustion, due to the lack of a limit on the "import chain" depth. When parsing file imports, recursion is used to process nested files; however, there is no limit imposed to the depth of files that can be parsed by the library. By building a sufficiently deep chain of MaterialX files one referencing the next, it is possible to crash the process using the MaterialX library via stack exhaustion. This is fixed in version 1.39.3.

An issue discovered in MikroTik Router v6.46.3 and earlier allows attacker to cause denial of service via misconfiguration in the SSH daemon.

Control Channel in OpenVPN 2.4.7 and earlier allows remote attackers to cause a denial of service via crafted reset packet.

qpid-cpp: ACL policies only loaded if the acl-file option specified enabling DoS by consuming all available file descriptors

A vulnerability was found in CRI-O that causes memory or disk space exhaustion on the node for anyone with access to the Kube API. The ExecSync request runs commands in a container and logs the output of the command. This output is then read by CRI-O after command execution, and it is read in a manner where the entire file corresponding to the output of the command is read in. Thus, if the output of the command is large it is possible to exhaust the memory or the disk space of the node when CRI-O reads the output of the command. The highest threat from this vulnerability is system availability.

A flaw was found in Keylime. Due to their blocking nature, the Keylime registrar is subject to a remote denial of service against its SSL connections. This flaw allows an attacker to exhaust all available connections.

A vulnerability has been identified in RUGGEDCOM ROX MX5000 (All versions < V2.14.1), RUGGEDCOM ROX RX1400 (All versions < V2.14.1), RUGGEDCOM ROX RX1500 (All versions < V2.14.1), RUGGEDCOM ROX RX1501 (All versions < V2.14.1), RUGGEDCOM ROX RX1510 (All versions < V2.14.1), RUGGEDCOM ROX RX1511 (All versions < V2.14.1), RUGGEDCOM ROX RX1512 (All versions < V2.14.1), RUGGEDCOM ROX RX1524 (All versions < V2.14.1), RUGGEDCOM ROX RX1536 (All versions < V2.14.1), RUGGEDCOM ROX RX5000 (All versions < V2.14.1). Affected devices write crashdumps without checking if enough space is available on the filesystem. Once the crashdump fills the entire root filesystem, affected devices fail to boot successfully. An attacker can leverage this vulnerability to cause a permanent Denial-of-Service.

The DynamicPageList3 extension is a reporting tool for MediaWiki, listing category members and intersections with various formats and details. In affected versions unsanitised input of regular expression date within the parameters of the DPL parser function, allowed for the possibility of ReDoS (Regex Denial of Service). This has been resolved in version 3.3.6. If you are unable to update you may also set `$wgDplSettings['functionalRichness'] = 0;` or disable DynamicPageList3 to mitigate.

Suricata is a network IDS, IPS and NSM engine developed by the OISF (Open Information Security Foundation) and the Suricata community. In versions 7.0.10 and below and 8.0.0-beta1 through 8.0.0-rc1, mishandling of data on HTTP2 stream 0 can lead to uncontrolled memory usage, leading to loss of visibility. Workarounds include disabling the HTTP/2 parser, and using a signature like drop http2 any any -> any any (frame:http2.hdr; byte_test:1,=,0,3; byte_test:4,=,0,5; sid: 1;) where the first byte test tests the HTTP2 frame type DATA and the second tests the stream id 0. This is fixed in versions 7.0.11 and 8.0.0.

Under certain circumstances, invalid authentication credentials could be sent to the login endpoint of Johnson Controls Metasys NAE55, SNE, and SNC engines prior to versions 11.0.6 and 12.0.4 and Facility Explorer F4-SNC engines prior to versions 11.0.6 and 12.0.4 to cause denial-of-service.

Mitsubishi MELSEC iQ-R Series PLCs with firmware 49 allow an unauthenticated attacker to halt the industrial process by sending a crafted packet over the network. This denial of service attack exposes Improper Input Validation. After halting, physical access to the PLC is required in order to restore production, and the device state is lost. This is related to R04CPU, RJ71GF11-T2, R04CPU, and RJ71GF11-T2.

On Juniper Networks SRX Series configured with application identification inspection enabled, receipt of specific HTTP traffic can cause high CPU load utilization, which could lead to traffic interruption. Application identification is enabled by default and is automatically turned on when Intrusion Detection and Prevention (IDP), AppFW, AppQoS, or AppTrack is configured. Thus, this issue might occur when IDP, AppFW, AppQoS, or AppTrack is configured. This issue affects Juniper Networks Junos OS on SRX Series: 12.3X48 versions prior to 12.3X48-D105; 15.1X49 versions prior to 15.1X49-D221, 15.1X49-D230; 17.4 versions prior to 17.4R3-S3; 18.1 versions prior to 18.1R3-S11; 18.2 versions prior to 18.2R3-S3; 18.3 versions prior to 18.3R2-S4, 18.3R3-S2; 18.4 versions prior to 18.4R2-S5, 18.4R3-S1; 19.1 versions prior to 19.1R2-S2, 19.1R3; 19.2 versions prior to 19.2R1-S5, 19.2R2; 19.3 versions prior to 19.3R3; 19.4 versions prior to 19.4R2.

A vulnerability has been identified in SIMATIC S7-300 CPU family (incl. related ET200 CPUs and SIPLUS variants) (All versions), SIMATIC TDC CPU555 (All versions), SINUMERIK 840D sl (All versions). Sending multiple specially crafted packets to the affected devices could cause a Denial-of-Service on port 102. A cold restart is required to recover the service.

In the Linux kernel, the following vulnerability has been resolved: net: sched: fix memory leak in tcindex_partial_destroy_work Syzbot reported memory leak in tcindex_set_parms(). The problem was in non-freed perfect hash in tcindex_partial_destroy_work(). In tcindex_set_parms() new tcindex_data is allocated and some fields from old one are copied to new one, but not the perfect hash. Since tcindex_partial_destroy_work() is the destroy function for old tcindex_data, we need to free perfect hash to avoid memory leak.

A vulnerability was found in RESTEasy, where RootNode incorrectly caches routes. This issue results in hash flooding, leading to slower requests with higher CPU time spent searching and adding the entry. This flaw allows an attacker to cause a denial of service.

Uncontrolled Resource Consumption vulnerability in Wikimedia Foundation Mediawiki - IPInfo Extension allows Excessive Allocation.This issue affects Mediawiki - IPInfo Extension: from 1.39.X before 1.39.13, from 1.42.X before 1.42.7, from 1.43.X before 1.43.2.

In ZeroMQ before version 4.3.3, there is a denial-of-service vulnerability. Users with TCP transport public endpoints, even with CURVE/ZAP enabled, are impacted. If a raw TCP socket is opened and connected to an endpoint that is fully configured with CURVE/ZAP, legitimate clients will not be able to exchange any message. Handshakes complete successfully, and messages are delivered to the library, but the server application never receives them. This is patched in version 4.3.3.

Certain WithSecure products allow Denial of Service via the aepack archive unpack handler. This affects WithSecure Client Security 15, WithSecure Server Security 15, WithSecure Email and Server Security 15, WithSecure Elements Endpoint Protection 17 and later, WithSecure Client Security for Mac 15, WithSecure Elements Endpoint Protection for Mac 17 and later, Linux Security 64 12.0 , Linux Protection 12.0, and WithSecure Atlant (formerly F-Secure Atlant) 1.0.35-1.

Softing Industrial Automation all versions prior to the latest build of version 4.47.0, The affected product is vulnerable to uncontrolled resource consumption, which may allow an attacker to cause a denial-of-service condition.

Katello has a Denial of Service vulnerability in API OAuth authentication

OpenTelemetry, also known as OTel for short, is a vendor-neutral open-source Observability framework for instrumenting, generating, collecting, and exporting telemetry data such as traces, metrics, logs. Autoinstrumentation out of the box adds the label `http_method` that has unbound cardinality. It leads to the server's potential memory exhaustion when many malicious requests are sent. HTTP method for requests can be easily set by an attacker to be random and long. In order to be affected program has to be instrumented for HTTP handlers and does not filter any unknown HTTP methods on the level of CDN, LB, previous middleware, etc. This issue has been patched in version 0.41b0.

Some HTTP/2 implementations are vulnerable to window size manipulation and stream prioritization manipulation, potentially leading to a denial of service. The attacker requests a large amount of data from a specified resource over multiple streams. They manipulate window size and stream priority to force the server to queue the data in 1-byte chunks. Depending on how efficiently this data is queued, this can consume excess CPU, memory, or both.

Pexip Infinity before 18 allows remote Denial of Service (XML parsing).

The _encode_invalid_chars function in util/url.py in the urllib3 library 1.25.2 through 1.25.7 for Python allows a denial of service (CPU consumption) because of an inefficient algorithm. The percent_encodings array contains all matches of percent encodings. It is not deduplicated. For a URL of length N, the size of percent_encodings may be up to O(N). The next step (normalize existing percent-encoded bytes) also takes up to O(N) for each step, so the total time is O(N^2). If percent_encodings were deduplicated, the time to compute _encode_invalid_chars would be O(kN), where k is at most 484 ((10+6*2)^2).

An issue was discovered in MediaWiki before 1.35.5, 1.36.x before 1.36.3, and 1.37.x before 1.37.1. A denial of service (resource consumption) can be accomplished by searching for a very long key in a Language Name Search.

OctoRPKI does not limit the depth of a certificate chain, allowing for a CA to create children in an ad-hoc fashion, thereby making tree traversal never end.

NetGear WNDR4700 Media Server devices with firmware 1.0.0.34 allow remote attackers to cause a denial of service (device crash).

In Apache Thrift 0.9.3 to 0.13.0, malicious RPC clients could send short messages which would result in a large memory allocation, potentially leading to denial of service.

Internet Initiative Japan Inc. SEIL Series routers SEIL/X1 2.50 through 4.62, SEIL/X2 2.50 through 4.62, SEIL/B1 2.50 through 4.62, and SEIL/x86 Fuji 1.70 through 3.22 allow remote attackers to cause a denial of service (CPU and traffic consumption) via a large number of NTP requests within a short time, which causes unnecessary NTP responses to be sent.

net/http in Go before 1.16.12 and 1.17.x before 1.17.5 allows uncontrolled memory consumption in the header canonicalization cache via HTTP/2 requests.

calibre before 5.32.0 contains a regular expression that is vulnerable to ReDoS (Regular Expression Denial of Service) in html_preprocess_rules in ebooks/conversion/preprocess.py.

JerryScript 2.2.0 allows attackers to cause a denial of service (stack consumption) via a proxy operation.

The MQTT protocol 3.1.1 requires a server to set a timeout value of 1.5 times the Keep-Alive value specified by a client, which allows remote attackers to cause a denial of service (loss of the ability to establish new connections), as demonstrated by SlowITe.

Discourse is an open source platform for community discussion. A malicious request can cause production log files to quickly fill up and thus result in the server running out of disk space. This problem has been patched in the 3.1.1 stable and 3.2.0.beta2 versions of Discourse. It is possible to temporarily work around this problem by reducing the `client_max_body_size nginx directive`. `client_max_body_size` will limit the size of uploads that can be uploaded directly to the server.

When MELSOFT transmission port (UDP/IP) of Mitsubishi Electric MELSEC iQ-R series (all versions), MELSEC iQ-F series (all versions), MELSEC Q series (all versions), MELSEC L series (all versions), and MELSEC F series (all versions) receives massive amount of data via unspecified vectors, resource consumption occurs and the port does not process the data properly. As a result, it may fall into a denial-of-service (DoS) condition. The vendor states this vulnerability only affects Ethernet communication functions.

Mitsubishi MELSEC iQ-R Series PLCs with firmware 33 allow attackers to halt the industrial process by sending an unauthenticated crafted packet over the network, because this denial of service attack consumes excessive CPU time. After halting, physical access to the PLC is required in order to restore production.

An issue was discovered in Foxit Reader and PhantomPDF before 9.7.2. It allows resource consumption via long strings in the content stream.

The HTTP/2 protocol allows a denial of service (server resource consumption) because request cancellation can reset many streams quickly, as exploited in the wild in August through October 2023.

Uncontrolled Resource Consumption can be exploited to cause the Phoenix Contact HMIs BTP 2043W, BTP 2070W and BTP 2102W in all versions to become unresponsive and not accurately update the display content (Denial of Service).

Knot Resolver before 5.1.1 allows traffic amplification via a crafted DNS answer from an attacker-controlled server, aka an "NXNSAttack" issue. This is triggered by random subdomains in the NSDNAME in NS records.

cpp-httplib is a C++11 single-file header-only cross platform HTTP/HTTPS library. In version 0.21.0, when many http headers fields are passed in, the library does not limit the number of headers, and the memory associated with the headers will not be released when the connection is disconnected. This leads to potential exhaustion of system memory and results in a server crash or unresponsiveness. Version 0.22.0 contains a patch for the issue.

Uncontrolled Resource Consumption vulnerability in Apache Tomcat if an HTTP/2 client did not acknowledge the initial settings frame that reduces the maximum permitted concurrent streams. This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.8, from 10.1.0-M1 through 10.1.42, from 9.0.0.M1 through 9.0.106. The following versions were EOL at the time the CVE was created but are known to be affected: 8.5.0 through 8.5.100. Users are recommended to upgrade to version 11.0.9, 10.1.43 or 9.0.107, which fix the issue.

Envoy version 1.14.2, 1.13.2, 1.12.4 or earlier may consume excessive amounts of memory when proxying HTTP/2 requests or responses with many small (i.e. 1 byte) data frames.