The Synergy Systems & Solutions PLC & RTU system has a vulnerability in HUSKY RTU 6049-E70 firmware versions 5.0 and prior. The affected product does not require adequate authentication, which may allow an attacker to read sensitive information or execute arbitrary code. This is a different issue than CVE-2019-16879 and CVE-2019-20045.

It was discovered that the api/storage web interface in Unitrends Backup (UB) before 10.0.0 has an issue in which one of its input parameters was not validated. A remote attacker could use this flaw to bypass authentication and execute arbitrary commands with root privilege on the target system.

In versions 8.2.1 through 8.5.2 of Pega Infinity, the password reset functionality for local accounts can be used to bypass local authentication checks.

An attacker with network access, could capture traffic and obtain user cookies, allowing the attacker to steal the active user session and make changes to the device via web, depending on the privileges obtained by the user.

authentik is an open-source identity provider. When initialising a oauth2 flow with a `code_challenge` and `code_method` (thus requesting PKCE), the single sign-on provider (authentik) must check if there is a matching and existing `code_verifier` during the token step. Prior to versions 2023.10.4 and 2023.8.5, authentik checks if the contents of `code_verifier` is matching only when it is provided. When it is left out completely, authentik simply accepts the token request with out it; even when the flow was started with a `code_challenge`. authentik 2023.8.5 and 2023.10.4 fix this issue.

Authentication bypass by assumed-immutable data in Azure DevOps allows an unauthorized attacker to elevate privileges over a network.

handleIncomingPacket in conn.go in Pion DTLS before 1.5.2 lacks a check for application data with epoch 0, which allows remote attackers to inject arbitrary unencrypted data after handshake completion.

capsule-proxy is a reverse proxy for the capsule operator project. Affected versions are subject to a privilege escalation vulnerability which is based on a missing check if the user is authenticated based on the `TokenReview` result. All the clusters running with the `anonymous-auth` Kubernetes API Server setting disable (set to `false`) are affected since it would be possible to bypass the token review mechanism, interacting with the upper Kubernetes API Server. This privilege escalation cannot be exploited if you're relying only on client certificates (SSL/TLS). This vulnerability has been addressed in version 0.4.6. Users are advised to upgrade.

Vasion Print (formerly PrinterLogic) before Virtual Appliance Host 22.0.951 Application 20.0.2368 allows Unauthenticated APIs for Single-Sign On V-2024-009.

A vulnerability has been identified in Control Center Server (CCS) (All versions < V1.5.0). The Control Center Server (CCS) contains an authentication bypass vulnerability in its XML-based communication protocol as provided by default on ports 5444/tcp and 5440/tcp. A remote attacker with network access to the CCS server could exploit this vulnerability to read the CCS users database, including the passwords of all users in obfuscated cleartext.

DataEase is an open source business intelligence and data visualization tool. Prior to version 2.10.6, there is a flaw in the authentication in the io.dataease.auth.filter.TokenFilter class, which may cause the risk of unauthorized access. The vulnerability has been fixed in v2.10.6. No known workarounds are available.

In all versions of ABB Power Generation Information Manager (PGIM) and Plant Connect, the affected product is vulnerable to authentication bypass, which may allow an attacker to remotely bypass authentication and extract credentials from the affected device.

InfluxDB before 1.7.6 has an authentication bypass vulnerability in the authenticate function in services/httpd/handler.go because a JWT token may have an empty SharedSecret (aka shared secret).

ask_password in Tomb 2.0 through 2.7 returns a warning when pinentry-curses is used and $DISPLAY is non-empty, causing affected users' files to be encrypted with "tomb {W] Detected DISPLAY, but only pinentry-curses is found." as the encryption key.

Schneider Electric Modicon Quantum PLC does not perform authentication between the Unity software and PLC, which allows remote attackers to cause a denial of service or possibly execute arbitrary code via unspecified vectors.

An issue was discovered in MoFi Network MOFI4500-4GXeLTE-V2 3.5.6-xnet-5052 allows attackers to bypass the authentication and execute arbitrary code via crafted HTTP request.

A vulnerability in session management for the web-based interface of Cisco Small Business Smart and Managed Switches could allow an unauthenticated, remote attacker to defeat authentication protections and gain unauthorized access to the management interface. The attacker could obtain the privileges of the highjacked session account, which could include administrator privileges on the device. The vulnerability is due to the use of weak entropy generation for session identifier values. An attacker could exploit this vulnerability to determine a current session identifier through brute force and reuse that session identifier to take over an ongoing session. In this way, an attacker could take actions within the management interface with privileges up to the level of the administrative user.

Cron log backup files contain administrator session IDs. It is trivial for any attacker who can reach the Pandora FMS Console to scrape the cron logs directory for cron log backups. The contents of these log files can then be abused to authenticate to the application as an administrator. This issue affects Pandora FMS <= 772.

Barco wePresent WiPG-1600W devices allow Authentication Bypass. Affected Version(s): 2.5.1.8. The Barco wePresent WiPG-1600W web interface does not use session cookies for tracking authenticated sessions. Instead, the web interface uses a "SEID" token that is appended to the end of URLs in GET requests. Thus the "SEID" would be exposed in web proxy logs and browser history. An attacker that is able to capture the "SEID" and originate requests from the same IP address (via a NAT device or web proxy) would be able to access the user interface of the device without having to know the credentials.

Improper Authentication vulnerability in Elementor Elementor Website Builder allows Accessing Functionality Not Properly Constrained by ACLs.This issue affects Elementor Website Builder: from n/a through 3.16.4.

Improper Authentication vulnerability in WPMU DEV Defender Security allows Accessing Functionality Not Properly Constrained by ACLs.This issue affects Defender Security: from n/a through 4.2.0.

file.cgi in Secure Computing SecurityReporter (aka Network Security Analyzer) before 4.6.3 allows remote attackers to bypass authentication via a name parameter ending with a "%00.gif" sequence. NOTE: a separate traversal vulnerability could be leveraged to download arbitrary files.

Improper Authentication in GitHub repository thorsten/phpmyfaq prior to 3.1.10.

NETGEAR Centria WNDR4700 devices with firmware 1.0.0.34 allow authentication bypass.

The IMITHEMES Listing plugin is vulnerable to privilege escalation via account takeover in all versions up to, and including, 3.3. This is due to the plugin not properly validating a verification code value prior to updating their password through the imic_reset_password_init() function. This makes it possible for unauthenticated attackers to change any user's passwords, including administrators if the users email is known.

SKYSEA Client View Ver.11.221.03 and earlier allows remote code execution via a flaw in processing authentication on the TCP connection with the management console program.

An issue in the component global.so of Totolink A830R V4.1.2cu.5182 allows attackers to bypass authentication via a crafted cookie.

A vulnerability was determined in bg5sbk MiniCMS up to 1.8. This affects an unknown function of the file /mc-admin/post-edit.php of the component Article Handler. Executing a manipulation can lead to improper authentication. It is possible to launch the attack remotely. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in bg5sbk MiniCMS up to 1.8. The impacted element is an unknown function of the file /minicms/mc-admin/post.php of the component Trash File Restore Handler. Performing a manipulation results in improper authentication. It is possible to initiate the attack remotely. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way.

Moxa Device Server Web Console 5232-N allows remote attackers to bypass authentication, and consequently modify settings and data, via vectors related to reading a cookie parameter containing a UserId value.

Improper Authentication vulnerability in Gmission Web Fax allows Privilege Escalation.This issue affects Web Fax: from 3.0 before 3.0.1

The WPCOM Member plugin for WordPress is vulnerable to authentication bypass in all versions up to, and including, 1.7.5. This is due to insufficient verification on the 'user_phone' parameter when logging in. This makes it possible for unauthenticated attackers to log in as any existing user on the site, such as an administrator, if SMS login is enabled.

The pam_sm_authenticate function in pam_sshauth.c in libpam-sshauth might allow context-dependent attackers to bypass authentication or gain privileges via a system user account.

A vulnerability was identified in simstudioai sim up to 0.5.27. This vulnerability affects unknown code of the file apps/sim/lib/auth/internal.ts of the component CRON Secret Handler. The manipulation of the argument INTERNAL_API_SECRET leads to improper authentication. It is possible to initiate the attack remotely. The exploit is publicly available and might be used. The identifier of the patch is e359dc2946b12ed5e45a0ec9c95ecf91bd18502a. Applying a patch is the recommended action to fix this issue.

The Email Verification, Email OTP, Block Spam Email, Passwordless login, Hide Login, Magic Login – User Verification plugin for WordPress is vulnerable to authentication bypass in all versions up to, and including, 2.0.44. This is due to the plugin not properly validating that an OTP was generated before comparing it to user input in the "user_verification_form_wrap_process_otpLogin" function. This makes it possible for unauthenticated attackers to log in as any user with a verified email address, such as an administrator, by submitting an empty OTP value.

IBM Verify Identity Access Container 11.0 through 11.0.2 and IBM Security Verify Access Container 10.0 through 10.0.9.1 and IBM Verify Identity Access 11.0 through 11.0.2 and IBM Security Verify Access 10.0 through 10.0.9.1 under certain load conditions could allow an attacker to bypass authentication mechanisms and gain unauthorized access to the application.

Improper host authentication vulnerability in wolfSSH version 1.4.20 and earlier clients that allows authentication bypass and leaking of clients credentials.

A vulnerability was found in ProjectsAndPrograms School Management System up to 6b6fae5426044f89c08d0dd101c7fa71f9042a59. This affects an unknown part. Performing manipulation results in missing authentication. The attack is possible to be carried out remotely. The exploit has been made public and could be used. This product adopts a rolling release strategy to maintain continuous delivery

A vulnerability has been found in D-Link DHP-W310AV 1.04 and classified as critical. This vulnerability affects unknown code. The manipulation leads to authentication bypass by spoofing. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used.

A flaw has been found in 70mai X200 up to 20251010. Affected is an unknown function of the component Pairing. Executing manipulation can lead to missing authentication. It is possible to launch the attack remotely. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A security flaw has been discovered in ChurchCRM up to 5.18.0. This impacts the function AuthMiddleware of the file src/ChurchCRM/Slim/Middleware/AuthMiddleware.php of the component API Endpoint. The manipulation results in missing authentication. The attack can be executed remotely. The exploit has been released to the public and may be used for attacks. The patch is identified as 3a1cffd2aea63d884025949cfbcfd274d06216a4. A patch should be applied to remediate this issue.

Logsign Unified SecOps Platform Authentication Bypass Vulnerability. This vulnerability allows remote attackers to bypass authentication on affected installations of Logsign Unified SecOps Platform. Authentication is not required to exploit this vulnerability. The specific flaw exists within the web service, which listens on TCP port 443 by default. The issue results from the lack of proper implementation of the authentication algorithm. An attacker can leverage this vulnerability to bypass authentication on the system. Was ZDI-CAN-25336.

An authentication bypass vulnerability allows remote attackers to gain administrative privileges on Sophos AP6 Series Wireless Access Points older than firmware version 1.7.2563 (MR7).

authentik is an open-source identity provider. Versions prior to 2022.11.2 and 2022.10.2 are vulnerable to unauthorized user creation and potential account takeover. With the default flows, unauthenticated users can create new accounts in authentik. If a flow exists that allows for email-verified password recovery, this can be used to overwrite the email address of admin accounts and take over their accounts. authentik 2022.11.2 and 2022.10.2 fix this issue. As a workaround, a policy can be created and bound to the `default-user-settings-flow flow` with the contents `return request.user.is_authenticated`.

The Appy Pie Connect for WooCommerce plugin for WordPress is vulnerable to Privilege Escalation due to missing authorization within the reset_user_password() REST handler in all versions up to, and including, 1.1.2. This makes it possible for unauthenticated attackers to to reset the password of arbitrary users, including administrators, thereby gaining administrative access.

Aspire-derived NEC PBXes, including the SV8100, SV9100, SL1100 and SL2100 with software releases 7.0 or higher contain the possibility if incorrectly configured to allow a blank username and password combination to be entered as a valid, successfully authenticating account.

On Aspire-derived NEC PBXes, including all versions of SV8100 devices, a set of documented, static login credentials may be used to access the DIM interface.

MFScripts YetiShare v3.5.2 through v4.5.4 might allow an attacker to reset a password by using a leaked hash (the hash never expires until used).

An issue was discovered on NETGEAR WNR1000V4 1.1.0.54 devices. The web management interface (setup.cgi) has an authentication bypass and other problems that ultimately allow an attacker to remotely compromise the device from a malicious webpage. The attacker sends an FW_remote.htm&todo=cfg_init request without a cookie, reads the Set-Cookie header in the 401 Unauthorized response, and then repeats the FW_remote.htm&todo=cfg_init request with the specified cookie.

In MIELE XGW 3000 ZigBee Gateway before 2.4.0, the Password Change Function does not require knowledge of the old password. This can be exploited in conjunction with CVE-2019-20480.