An exploitable command injection vulnerability exists in the hostname functionality of the Moxa AWK-3131A firmware version 1.13. A specially crafted entry to network configuration information can cause execution of arbitrary system commands, resulting in full control of the device. An attacker can send various authenticated requests to trigger this vulnerability.

A command injection vulnerability is present in the web management interface of ArubaOS that permits an authenticated user to execute arbitrary commands on the underlying operating system. A malicious administrator could use this ability to install backdoors or change system configuration in a way that would not be logged. This vulnerability only affects ArubaOS 8.x.

An exploitable command injection vulnerability exists in the cloud connectivity feature of WAGO PFC200. An attacker can inject operating system commands into any of the parameter values contained in the firmware update command. This affects WAGO PFC200 Firmware version 03.02.02(14), version 03.01.07(13), and version 03.00.39(12)

A vulnerability was found in Ruijie RG-UAC up to 20240428. It has been declared as critical. Affected by this vulnerability is an unknown functionality of the file /view/IPV6/naborTable/add_commit.php. The manipulation of the argument ip_addr/mac_addr leads to os command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-263113 was assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

NetApp OnCommand System Manager 2.1 and earlier allows remote attackers to inject arbitrary commands in the Halt/Reboot interface.

Fides is an open-source privacy engineering platform. Starting in version 2.19.0 and prior to version 2.44.0, the Email Templating feature uses Jinja2 without proper input sanitization or rendering environment restrictions, allowing for Server-Side Template Injection that grants Remote Code Execution to privileged users. A privileged user refers to an Admin UI user with the default `Owner` or `Contributor` role, who can escalate their access and execute code on the underlying Fides Webserver container where the Jinja template rendering function is executed. The vulnerability has been patched in Fides version `2.44.0`. Users are advised to upgrade to this version or later to secure their systems against this threat. There are no workarounds.

A vulnerability has been found in Ruijie RG-UAC up to 20240428 and classified as critical. This vulnerability affects unknown code of the file /view/IPV6/ipv6Addr/ip_addr_edit_commit.php. The manipulation of the argument text_ip_addr/orgprelen/orgname leads to os command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. VDB-263110 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability classified as critical has been found in Ruijie RG-UAC up to 20240428. Affected is an unknown function of the file /view/dhcp/dhcpClient/dhcp_client_commit.php. The manipulation of the argument ifName leads to os command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. VDB-263106 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

Rittal CMC PU III Web management Version affected: V3.11.00_2. Version fixed: V3.17.10 is affected by a remote code execution vulnerablity. It is possible to introduce shell code to create a reverse shell in the PU-Hostname field of the TCP/IP Configuration dialog. Web application fails to sanitize user input on Network TCP/IP configuration page. This allows the attacker to inject commands as root on the device which will be executed once the data is received.

An exploitable command injection vulnerability exists in the Cloud Connectivity functionality of WAGO PFC200 Firmware versions 03.02.02(14), 03.01.07(13), and 03.00.39(12). An attacker can inject OS commands into the TimeoutUnconfirmed parameter value contained in the Firmware Update command.

A vulnerability in the Redfish protocol of Cisco Integrated Management Controller (IMC) could allow an authenticated, remote attacker to inject and execute arbitrary commands with root privileges on an affected device. The vulnerability is due to insufficient validation of user-supplied input by the affected software. An attacker could exploit this vulnerability by sending crafted authenticated commands to the web-based management interface of the affected software. A successful exploit could allow the attacker to inject and execute arbitrary commands on an affected device with root privileges.

Command Injection vulnerability in McAfee Enterprise Security Manager (ESM) prior to 11.2.0 and prior to 10.4.0 allows authenticated user to execute arbitrary code via specially crafted parameters.

The email search interface of HGiga iSherlock (including MailSherlock, SpamSherock, AuditSherlock) fails to filter special characters in certain function parameters, allowing remote attackers with administrative privileges to exploit this vulnerability for Command Injection attacks, enabling execution of arbitrary system commands.

An OS command injection vulnerability exists in the device network settings functionality of reolink RLC-410W v3.0.0.136_20121102. At [4] the dns_data->dns1 variable, that has the value of the dns1 parameter provided through the SetLocal API, is not validated properly. This would lead to an OS command injection.

PHP Code Injection vulnerability in FUDforum Bulletin Board Software 3.0.4 could allow remote attackers to execute arbitrary code on the system.

MaianAffiliate v.1.0 is suffers from code injection by adding a new product via the admin panel. The injected payload is reflected on the affiliate main page for all authenticated and unauthenticated visitors.

Vulnerability in the product Docsis 3.0 UBC1319BA00 Router supported affected version 1319010201r009. The vulnerability allows an attacker with privileges and network access through the ping.cmd component to execute commands on the device.

PHPMyWind 5.6 is vulnerable to Remote Code Execution. Becase input is filtered without "<, >, ?, =, `,...." In WriteConfig() function, an attacker can inject php code to /include/config.cache.php file.

An OScommand injection vulnerability exists in the device network settings functionality of reolink RLC-410W v3.0.0.136_20121102. At [8] the devname variable, that has the value of the name parameter provided through the SetDevName API, is not validated properly. This would lead to an OS command injection.

Cacti is an open source performance and fault management framework. An admin user can create a device with a malicious hostname containing php code and repeat the installation process (completing only step 5 of the installation process is enough, no need to complete the steps before or after it) to use a php file as the cacti log file. After having the malicious hostname end up in the logs (log poisoning), one can simply go to the log file url to execute commands to achieve RCE. This issue has been addressed in version 1.2.28 and all users are advised to upgrade. There are no known workarounds for this vulnerability.

The system configuration interface of HGiga iSherlock (including MailSherlock, SpamSherock, AuditSherlock) fails to filter special characters in certain function parameters, allowing remote attackers with administrative privileges to exploit this vulnerability for Command Injection attacks, enabling execution of arbitrary system commands.

Affected versions of Atlassian Jira Server or Data Center using the Jira Service Management addon allow remote attackers with JIRA Administrators access to execute arbitrary Java code via a server-side template injection vulnerability in the Email Template feature. The affected versions of Jira Server or Data Center are before version 8.13.12, and from version 8.14.0 before 8.19.1.

Affected versions of Atlassian Jira Service Management Server and Data Center allow remote attackers with "Jira Administrators" access to execute arbitrary Java code or run arbitrary system commands via a Server_Side Template Injection vulnerability in the Email Template feature. The affected versions are before version 4.13.9, and from version 4.14.0 before 4.18.0.

A post-authentication command injection vulnerability in Zyxel ATP series firmware versions from V4.32 through V5.38, USG FLEX series firmware versions from V4.50 through V5.38, USG FLEX 50(W) series firmware versions from V4.16 through V5.38, and USG20(W)-VPN series firmware versions from V4.16 through V5.38 could allow an authenticated attacker with administrator privileges to execute some OS commands on an affected device by uploading a crafted internal user agreement file to the vulnerable device.

A post-authentication command injection vulnerability in Zyxel ATP series firmware versions from V5.00 through V5.38, USG FLEX series firmware versions from V5.00 through V5.38, USG FLEX 50(W) series firmware versions from V5.00 through V5.38, and USG20(W)-VPN series firmware versions from V5.00 through V5.38 could allow an authenticated attacker with administrator privileges to execute some OS commands on an affected device by uploading a crafted compressed language file via FTP.

A remote arbitrary command execution vulnerability was discovered in HPE Aruba Instant (IAP) version(s): Aruba Instant 6.4.x.x: 6.4.4.8-4.2.4.18 and below; Aruba Instant 6.5.x.x: 6.5.4.20 and below; Aruba Instant 8.5.x.x: 8.5.0.12 and below; Aruba Instant 8.6.x.x: 8.6.0.11 and below; Aruba Instant 8.7.x.x: 8.7.1.3 and below. Aruba has released patches for Aruba Instant (IAP) that address this security vulnerability.

A vulnerability, which was classified as critical, has been found in Ruijie RG-UAC up to 20240419. This issue affects some unknown processing of the file /view/network Config/GRE/gre_edit_commit.php. The manipulation of the argument name leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-262145 was assigned to this vulnerability.

The function "generate_app_certificates" in lib/app_certificates.js of FIWARE Keyrock <= 8.4 does not neutralize special elements used in an OS Command properly. This allows an authenticated user with permissions to create applications to execute commands by creating an application with a malicious name.

Authenticated command injection vulnerability exists in the ArubaOS command line interface. Successful exploitation of this vulnerability result in the ability to inject shell commands on the underlying operating system.

Contao is an open source CMS that allows you to create websites and scalable web applications. In affected versions it is possible to load PHP files by entering insert tags in the Contao back end. Installations are only affected if they have untrusted back end users who have the rights to modify fields that are shown in the front end. Update to Contao 4.4.56, 4.9.18 or 4.11.7 to resolve. If you cannot update then disable the login for untrusted back end users.

A remote arbitrary command execution vulnerability was discovered in HPE Aruba Instant (IAP) version(s): 6.4.x.x: 6.4.4.8-4.2.4.18 and below; Aruba Instant 6.5.x.x: 6.5.4.20 and below; Aruba Instant 8.5.x.x: 8.5.0.12 and below; Aruba Instant 8.6.x.x: 8.6.0.11 and below; Aruba Instant 8.7.x.x: 8.7.1.3 and below. Aruba has released patches for Aruba Instant (IAP) that address this security vulnerability.

An issue in Doccano Open source annotation tools for machine learning practitioners v.1.8.4 and Doccano Auto Labeling Pipeline module to annotate a document automatically v.0.1.23 allows a remote attacker to escalate privileges via a crafted REST Request.

An improper neutralization of special elements used in an OS command ('OS Command Injection') vulnerability [CWE-78] in Fortinet FortiAnalyzer version 7.4.0 through 7.4.3, 7.2.0 through 7.2.5, 7.0.0 through 7.0.13, 6.4.0 through 6.4.15 and 6.2.2 through 6.2.13, Fortinet FortiManager version 7.4.0 through 7.4.3, 7.2.0 through 7.2.5, 7.0.0 through 7.0.13, 6.4.0 through 6.4.15 and 6.2.2 through 6.2.13, Fortinet FortiAnalyzer BigData version 7.4.0, 7.2.0 through 7.2.7, 7.0.1 through 7.0.6, 6.4.5 through 6.4.7 and 6.2.5, Fortinet FortiAnalyzer Cloud version 7.4.1 through 7.4.3, 7.2.1 through 7.2.5, 7.0.1 through 7.0.13 and 6.4.1 through 6.4.7 and Fortinet FortiManager Cloud version 7.4.1 through 7.4.3, 7.2.1 through 7.2.5, 7.0.1 through 7.0.13 and 6.4.1 through 6.4.7 GUI allows an authenticated privileged attacker to execute unauthorized code or commands via crafted HTTPS or HTTP requests.

Dell EMC CloudLink 7.1 and all prior versions contain an OS command injection Vulnerability. A remote high privileged attacker, may potentially exploit this vulnerability, leading to the execution of arbitrary OS commands on the application's underlying OS, with the privileges of the vulnerable application. Exploitation may lead to a system take over by an attacker. This vulnerability is considered critical as it may be leveraged to completely compromise the vulnerable application as well as the underlying operating system. Dell recommends customers to upgrade at the earliest opportunity.

SeaCMS 12.9 has a remote code execution vulnerability. The vulnerability is due to the fact that although admin_template.php imposes certain restrictions on the edited file, attackers can still bypass the restrictions and write code in some way, allowing authenticated attackers to exploit the vulnerability to execute arbitrary commands and gain system privileges.

AdTran 834-5 HDC17600021F1 (SmartOS 11.1.1.1) devices enable the SSH service by default and have a hidden, undocumented, hard-coded support account whose password is based on the devices MAC address. All of the devices internet interfaces share a similar MAC address that only varies in their final octet. This allows network-adjacent attackers to derive the support user's SSH password by decrementing the final octet of the connected gateway address or via the BSSID. An attacker can then execute arbitrary OS commands with root-level privileges. NOTE: The vendor states that there is no intended functionality allowing an attacker to execute arbitrary OS Commands with root-level privileges. The vendor also states that this issue was fixed in SmartOS 12.5.5.1.

Magento Commerce versions 2.4.2 (and earlier), 2.4.2-p1 (and earlier) and 2.3.7 (and earlier) are affected by an Improper Neutralization of Special Elements Used In A Command via the Data collection endpoint. An attacker with admin privileges can upload a specially crafted file to achieve remote code execution.

A vulnerability was reported in Lenovo Smart Camera X3, X5, and C2E that could allow command injection by setting a specially crafted network configuration. This vulnerability is the same as CNVD-2020-68652.

A privilege escalation vulnerability was discovered in the SSH captive command shell interface that could allow an authenticated XCC user with elevated privileges to perform command injection via specially crafted file uploads.

A privilege escalation vulnerability was discovered in the web interface or SSH captive command shell interface of XCC that could allow an authenticated XCC user with elevated privileges to perform command injection via a specially crafted request.

A privilege escalation vulnerability was discovered in XCC that could allow an authenticated XCC user with elevated privileges to perform command injection via specially crafted IPMI commands.

A remote arbitrary command execution vulnerability was discovered in Aruba ClearPass Policy Manager version(s): Prior to 6.10.0, 6.9.6 and 6.8.9. Aruba has released updates to ClearPass Policy Manager that address this security vulnerability.

A privilege escalation vulnerability was discovered in an upload processing functionality of XCC that could allow an authenticated XCC user with elevated privileges to perform command injection via specially crafted file uploads.

A code injection vulnerability exists in the berriai/litellm application, version 1.34.6, due to the use of unvalidated input in the eval function within the secret management system. This vulnerability requires a valid Google KMS configuration file to be exploitable. Specifically, by setting the `UI_LOGO_PATH` variable to a remote server address in the `get_image` function, an attacker can write a malicious Google KMS configuration file to the `cached_logo.jpg` file. This file can then be used to execute arbitrary code by assigning malicious code to the `SAVE_CONFIG_TO_DB` environment variable, leading to full system control. The vulnerability is contingent upon the use of the Google KMS feature.

MangoOS before 5.2.0 was discovered to contain an authenticated remote code execution (RCE) vulnerability via the Active Process Command feature.

Multiple camera devices by UDP Technology, Geutebrück and other vendors are vulnerable to command injection, which may allow an attacker to remotely execute arbitrary code.