Kirby is a content management system. A vulnerability in versions prior to 3.5.8.3, 3.6.6.3, 3.7.5.2, 3.8.4.1, and 3.9.6 affects all Kirby sites that might have potential attackers in the group of authenticated Panel users or that allow external visitors to update a Kirby content file (e.g. via a contact or comment form). Kirby sites are *not* affected if they don't allow write access for untrusted users or visitors. A field injection in a content storage implementation is a type of vulnerability that allows attackers with content write access to overwrite content fields that the site developer didn't intend to be modified. In a Kirby site this can be used to alter site content, break site behavior or inject malicious data or code. The exact security risk depends on the field type and usage. Kirby stores content of the site, of pages, files and users in text files by default. The text files use Kirby's KirbyData format where each field is separated by newlines and a line with four dashes (`----`). When reading a KirbyData file, the affected code first removed the Unicode BOM sequence from the file contents and afterwards split the content into fields by the field separator. When writing to a KirbyData file, field separators in field data are escaped to prevent user input from interfering with the field structure. However this escaping could be tricked by including a Unicode BOM sequence in a field separator (e.g. `--\xEF\xBB\xBF--`). When writing, this was not detected as a separator, but because the BOM was removed during reading, it could be abused by attackers to inject other field data into content files. Because each field can only be defined once per content file, this vulnerability only affects fields in the content file that were defined above the vulnerable user-writable field or not at all. Fields that are defined below the vulnerable field override the injected field content and were therefore already protected. The problem has been patched in Kirby 3.5.8.3, 3.6.6.3, 3.7.5.2, 3.8.4.1, and 3.9.6. In all of the mentioned releases, the maintainers have fixed the affected code to only remove the Unicode BOM sequence at the beginning of the file. This fixes this vulnerability both for newly written as well as for existing content files.

The ACL (Access Control List) of SAP Message Server - versions KERNEL 7.22, KERNEL 7.53, KERNEL 7.54, KERNEL 7.77, RNL64UC 7.22, RNL64UC 7.22EXT, RNL64UC 7.53, KRNL64NUC 7.22, KRNL64NUC 7.22EXT, can be bypassed in certain conditions, which may enable an authenticated malicious user to enter the network of the SAP systems served by the attacked SAP Message server. This may lead to unauthorized read and write of data as well as rendering the system unavailable.

Weak access control in Wing FTP Server (Admin Web Client) allows for privilege escalation.This issue affects Wing FTP Server: <= 7.2.0.

Adobe Commerce versions 2.4.7-beta1 (and earlier), 2.4.6-p2 (and earlier), 2.4.5-p4 (and earlier) and 2.4.4-p5 (and earlier) are affected by an Incorrect Authorization . An authenticated attacker can exploit this to achieve information exposure and privilege escalation.

Incorrect user role checking in multiple REST API endpoints in ProLion CryptoSpike 3.0.15P2 allows a remote attacker with low privileges to execute privileged functions and achieve privilege escalation via REST API endpoint invocation.

An incorrect authorization vulnerability [CWE-863] in FortiMail webmail version 7.2.0 through 7.2.2, version 7.0.0 through 7.0.5 and below 6.4.7 allows an authenticated attacker to login on other users accounts from the same web domain via crafted HTTP or HTTPs requests.

AWS Cloud Development Kit (AWS CDK) is an open-source software development framework to define cloud infrastructure in code and provision it through AWS CloudFormation. In the packages `aws-cdk-lib` 2.0.0 until 2.80.0 and `@aws-cdk/aws-eks` 1.57.0 until 1.202.0, `eks.Cluster` and `eks.FargateCluster` constructs create two roles, `CreationRole` and `default MastersRole`, that have an overly permissive trust policy. The first, referred to as the `CreationRole`, is used by lambda handlers to create the cluster and deploy Kubernetes resources (e.g `KubernetesManifest`, `HelmChart`, ...) onto it. Users with CDK version higher or equal to 1.62.0 (including v2 users) may be affected. The second, referred to as the `default MastersRole`, is provisioned only if the `mastersRole` property isn't provided and has permissions to execute `kubectl` commands on the cluster. Users with CDK version higher or equal to 1.57.0 (including v2 users) may be affected. The issue has been fixed in `@aws-cdk/aws-eks` v1.202.0 and `aws-cdk-lib` v2.80.0. These versions no longer use the account root principal. Instead, they restrict the trust policy to the specific roles of lambda handlers that need it. There is no workaround available for CreationRole. To avoid creating the `default MastersRole`, use the `mastersRole` property to explicitly provide a role.

TN-5900 Series firmware version v3.3 and prior is vulnerable to improper-authentication vulnerability. This vulnerability arises from inadequate authentication measures implemented in the web API handler, allowing low-privileged APIs to execute restricted actions that only high-privileged APIs are allowed This presents a potential risk of unauthorized exploitation by malicious actors.

A lateral privilege escalation vulnerability in XXL-Job v2.4.1 allows users to execute arbitrary commands on another user's account via a crafted POST request to the component /jobinfo/.

Sealos is an open source cloud operating system distribution based on the Kubernetes kernel. In versions of Sealos prior to 4.2.1-rc4 an improper configuration of role based access control (RBAC) permissions resulted in an attacker being able to obtain cluster control permissions, which could control the entire cluster deployed with Sealos, as well as hundreds of pods and other resources within the cluster. This issue has been addressed in version 4.2.1-rc4. Users are advised to upgrade. There are no known workarounds for this vulnerability.

Pydio Cells allows users by default to create so-called external users in order to share files with them. By modifying the HTTP request sent when creating such an external user, it is possible to assign the new user arbitrary roles. By assigning all roles to a newly created user, access to all cells and non-personal workspaces is granted.

Due to broken authorization, SAP Business One (SLD) allows an authenticated attacker to gain administrator privileges of a database by invoking the corresponding API.�As a result , it has a high impact on the confidentiality, integrity, and availability of the application.

Incorrect Authorization vulnerability in Mobatime web application allows Privilege Escalation, Exploiting Incorrectly Configured Access Control Security Levels.This issue affects Mobatime web application: through 06.7.22.

The Formidable Forms WordPress plugin before 6.3.1 does not adequately authorize the user or validate the plugin URL in its functionality for installing add-ons. This allows a user with a role as low as Subscriber to install and activate arbitrary plugins of arbitrary versions from the WordPress.org plugin repository onto the site, leading to Remote Code Execution.

GLPI is a free asset and IT management software package. Starting in version 0.83 and prior to versions 9.5.13 and 10.0.7, a user who has the Technician profile could see and generate a Personal token for a Super-Admin. Using such token it is possible to negotiate a GLPI session and hijack the Super-Admin account, resulting in a Privilege Escalation. Versions 9.5.13 and 10.0.7 contain a patch for this issue.

Incorrect access control in the runReport function of MyQ Solution Print Server before 8.2 Patch 32 and Central Server before 8.2 Patch 22 allows users who do not have appropriate access rights to generate internal reports using a direct URL.

A hidden API exists in TapHome's core platform before version 2023.2 that allows an authenticated, low privileged user to change passwords of other users without any prior knowledge. The attacker may gain full access to the device by using this vulnerability.

IBM Security Guardium Key Lifecycle Manager 3.0, 3.0.1, 4.0, 4.1, and 4.1.1 could allow an authenticated user to perform actions that they should not have access to due to improper authorization. IBM X-Force ID: 247630.

A vulnerability in the web-based management interface of ClearPass Policy Manager allows an attacker with read-only privileges to perform actions that change the state of the ClearPass Policy Manager instance. Successful exploitation of this vulnerability allows an attacker to complete state-changing actions in the web-based management interface that should not be allowed by their current level of authorization on the platform.

A CWE-863: Incorrect Authorization vulnerability exists that could allow remote code execution on upload and install packages when a hacker is using a low privileged user account. Affected products: StruxureWare Data Center Expert (V7.9.2 and prior)

Mattermost fails to restrict a user with permissions to edit other users and to create personal access tokens from elevating their privileges to system admin

On affected platforms running Arista EOS, an authorized attacker with permissions to perform gNMI requests could craft a request allowing it to update arbitrary configurations in the switch. This situation occurs only when the Streaming Telemetry Agent (referred to as the TerminAttr agent) is enabled and gNMI access is configured on the agent. Note: This gNMI over the Streaming Telemetry Agent scenario is mostly commonly used when streaming to a 3rd party system and is not used by default when streaming to CloudVision

Incorrect Authorization vulnerability in Apache Software Foundation Apache IoTDB.This issue affects the iotdb-web-workbench component from 0.13.0 before 0.13.3. iotdb-web-workbench is an optional component of IoTDB, providing a web console of the database. This problem is fixed from version 0.13.3 of iotdb-web-workbench onwards.

Argo CD is a declarative, GitOps continuous delivery tool for Kubernetes. Versions of Argo CD starting with v1.8.2 and prior to 2.3.13, 2.4.19, 2.5.6, and 2.6.0-rc-3 are vulnerable to an improper authorization bug causing the API to accept certain invalid tokens. OIDC providers include an `aud` (audience) claim in signed tokens. The value of that claim specifies the intended audience(s) of the token (i.e. the service or services which are meant to accept the token). Argo CD _does_ validate that the token was signed by Argo CD's configured OIDC provider. But Argo CD _does not_ validate the audience claim, so it will accept tokens that are not intended for Argo CD. If Argo CD's configured OIDC provider also serves other audiences (for example, a file storage service), then Argo CD will accept a token intended for one of those other audiences. Argo CD will grant the user privileges based on the token's `groups` claim, even though those groups were not intended to be used by Argo CD. This bug also increases the impact of a stolen token. If an attacker steals a valid token for a different audience, they can use it to access Argo CD. A patch for this vulnerability has been released in versions 2.6.0-rc3, 2.5.6, 2.4.19, and 2.3.13. There are no workarounds.

VMware Aria Operations contains a privilege escalation vulnerability. An authenticated malicious user with ReadOnly privileges can perform code execution leading to privilege escalation.

In Click Studios Passwordstate before build 9920, there is a potential permission escalation on the edit folder screen.

Delta Electronics InfraSuite Device Master versions prior to 1.0.5 contains an improper access control vulnerability in which an attacker can use the Device-Gateway service and bypass authorization, which could result in privilege escalation.

A remote command execution in Vesta Control Panel through 0.9.8-26 allows any authenticated user to execute arbitrary commands on the system via cron jobs.

Incorrect Authorization vulnerability in Apache Software Foundation Apache Pulsar. This issue affects Apache Pulsar: before 2.10.4, and 2.11.0. When a client connects to the Pulsar Function Worker via the Pulsar Proxy where the Pulsar Proxy uses mTLS authentication to authenticate with the Pulsar Function Worker, the Pulsar Function Worker incorrectly performs authorization by using the Proxy's role for authorization instead of the client's role, which can lead to privilege escalation, especially if the proxy is configured with a superuser role. The recommended mitigation for impacted users is to upgrade the Pulsar Function Worker to a patched version. 2.10 Pulsar Function Worker users should upgrade to at least 2.10.4. 2.11 Pulsar Function Worker users should upgrade to at least 2.11.1. 3.0 Pulsar Function Worker users are unaffected. Any users running the Pulsar Function Worker for 2.9.* and earlier should upgrade to one of the above patched versions.

An issue was discovered in ProVide (formerly zFTPServer) through 13.1. It doesn't enforce permission over Windows Symlinks or Junctions. As a result, a low-privileged user (non-admin) can craft a Junction Link in a directory he has full control of, breaking out of the sandbox.

An issue was discovered in Joomla! before 3.9.16. Incorrect Access Control in the SQL fieldtype of com_fields allows access for non-superadmin users.

Vault Community, Vault Enterprise (“Vault”) Azure Auth method did not correctly validate the claims in the Azure-issued token, resulting in the potential bypass of the bound_locations parameter on login. Fixed in Vault Community Edition 1.19.1 and Vault Enterprise 1.19.1, 1.18.7, 1.17.14, 1.16.18.

xCAT is a toolkit for deployment and administration of computer clusters. In versions prior to 2.16.5 if zones are configured as a mechanism to secure clusters in XCAT, it is possible for a local root user from one node to obtain credentials to SSH to any node in any zone, except the management node of the default zone. XCAT zones are not enabled by default. Only users that use the optional zone feature are impacted. All versions of xCAT prior to xCAT 2.16.5 are vulnerable. This problem has been fixed in xCAT 2.16.5. Users making use of zones should upgrade to 2.16.5. Users unable to upgrade may mitigate the issue by disabling zones or patching the management node with the fix contained in commit `85149c37f49`.

An issue was discovered in the FileImporter extension in MediaWiki through 1.36. For certain relaxed configurations of the $wgFileImporterRequiredRight variable, it might not validate all appropriate user rights, thus allowing a user with insufficient rights to perform operations (specifically file uploads) that they should not be allowed to perform.

HashiCorp Terraform Enterprise releases up to v202106-1 did not properly perform authorization checks on a subset of API requests executed using the run token, allowing privilege escalation to organization owner. Fixed in v202107-1.

A CWE-863: Incorrect Authorization vulnerability exists that could allow access to device credentials on specific DCE endpoints not being properly secured when a hacker is using a low privileged user. Affected products: StruxureWare Data Center Expert (V7.9.2 and prior)

SGUDA U-Lock central lock control service’s user management function has incorrect authorization. A remote attacker with general user privilege can exploit this vulnerability to call privileged APIs to access, modify and delete user information.

Privilege escalation from Editor to Admin using Groups in Concrete CMS versions 8.5.6 and below. If a group is granted "view" permissions on the bulkupdate page, then users in that group can escalate to being an administrator with a specially crafted curl. Fixed by adding a check for group permissions before allowing a group to be moved. Concrete CMS Security team CVSS scoring: 7.1 AV:N/AC:H/PR:L/UI:R/S:U/C:H/I:H/A:HCredit for discovery: "Adrian Tiron from FORTBRIDGE ( https://www.fortbridge.co.uk/ )"This fix is also in Concrete version 9.0.0

REDDOXX MailDepot 2032 2.2.1242 allows authenticated users to access the mailboxes of other users.

Hasura GraphQL Engine before 2.15.2 mishandles row-level authorization in the Update Many API for Postgres backends. The fixed versions are 2.10.2, 2.11.3, 2.12.1, 2.13.2, 2.14.1, and 2.15.2. (Versions before 2.10.0 are unaffected.)

On a Samba 4 AD DC the LDAP server in all versions of Samba from 4.0.0 onwards incorrectly validates permissions to modify passwords over LDAP allowing authenticated users to change any other users' passwords, including administrative users and privileged service accounts (eg Domain Controllers).

Pandora FMS 7.x suffers from remote code execution vulnerability. With an authenticated user who can modify the alert system, it is possible to define and execute commands as root/Administrator. NOTE: The product vendor states that the vulnerability as it is described is not in fact an actual vulnerability. They state that to be able to create alert commands, you need to have admin rights. They also state that the extended ACL system can disable access to specific sections of the configuration, such as defining new alert commands

A vulnerability in the web services interface of Cisco Firepower Management Center (FMC) Software could allow an authenticated, remote attacker to execute certain unauthorized configuration commands on a Firepower Threat Defense (FTD) device that is managed by the FMC Software. This vulnerability is due to insufficient authorization of configuration commands that are sent through the web service interface. An attacker could exploit this vulnerability by authenticating to the FMC web services interface and sending a crafted HTTP request to an affected device. A successful exploit could allow the attacker to execute certain configuration commands on the targeted FTD device. To successfully exploit this vulnerability, an attacker would need valid credentials on the FMC Software.

IBM Storage Virtualize 8.4, 8.5, 8.6, and 8.7 could allow an authenticated user to escalate their privileges in an SSH session due to incorrect authorization checks to access resources.

A vulnerability in the vManage web-based UI (Web UI) of the Cisco SD-WAN Solution could allow an authenticated, remote attacker to gain elevated privileges on an affected vManage device. The vulnerability is due to a failure to properly authorize certain user actions in the device configuration. An attacker could exploit this vulnerability by logging in to the vManage Web UI and sending crafted HTTP requests to vManage. A successful exploit could allow attackers to gain elevated privileges and make changes to the configuration that they would not normally be authorized to make.

The ProfileGrid WordPress plugin before 5.3.1 provides an AJAX endpoint for resetting a user password but does not implement proper authorization. This allows a user with low privileges, such as subscriber, to change the password of any account, including Administrator ones.

A flaw was found in Wildfly Security Manager, running under JDK 11 or 8, that authorized requests for any requester. This flaw could be used by a malicious app deployed on the app server to access unauthorized information and possibly conduct further attacks. Versions shipped with Red Hat Jboss EAP 7 and Red Hat SSO 7 are vulnerable to this issue.

SGUDA U-Lock central lock control service’s lock management function has incorrect authorization. A remote attacker with general privilege can exploit this vulnerability to call privileged APIs to acquire information, manipulate or disrupt the functionality of arbitrary electronic locks.

In Cloudera CDH before 5.7.1, Impala REVOKE ALL ON SERVER commands do not revoke all privileges.

ZStack is open source IaaS(infrastructure as a service) software aiming to automate datacenters, managing resources of compute, storage, and networking all by APIs. Affected versions of ZStack REST API are vulnerable to post-authentication Remote Code Execution (RCE) via bypass of the Groovy shell sandbox. The REST API exposes the GET zstack/v1/batch-queries?script endpoint which is backed up by the BatchQueryAction class. Messages are represented by the APIBatchQueryMsg, dispatched to the QueryFacadeImpl facade and handled by the BatchQuery class. The HTTP request parameter script is mapped to the APIBatchQueryMsg.script property and evaluated as a Groovy script in BatchQuery.query the evaluation of the user-controlled Groovy script is sandboxed by SandboxTransformer which will apply the restrictions defined in the registered (sandbox.register()) GroovyInterceptor. Even though the sandbox heavily restricts the receiver types to a small set of allowed types, the sandbox is non effective at controlling any code placed in Java annotations and therefore vulnerable to meta-programming escapes. This issue leads to post-authenticated remote code execution. For more details see the referenced GHSL-2021-065. This issue is patched in versions 3.8.21, 3.10.8, and 4.1.0.