RELY-PCIe v22.2.1 to v23.1.0 was discovered to contain a code injection vulnerability via the getParams function in phpinf.php.

In Splunk Enterprise versions below 8.2.12, 9.0.6, and 9.1.1, an attacker can create an external lookup that calls a legacy internal function. The attacker can use this internal function to insert code into the Splunk platform installation directory. From there, a user can execute arbitrary code on the Splunk platform Instance.

includes/configure_client.php in RaspAP 2.6.6 allows attackers to execute commands via command injection.

A security vulnerability has been detected in D-Link DIR-816 1.10CNB05_R1B011D88210. Affected by this issue is the function sub_445E7C of the file /goform/singlePortForward. Such manipulation of the argument ip_address leads to command injection. It is possible to launch the attack remotely. The exploit has been disclosed publicly and may be used.

An OS command injection vulnerability exists in the daretools binary functionality of InHand Networks InRouter302 V3.5.4. A specially-crafted network request can lead to arbitrary command execution. An attacker can send a sequence of requests to trigger this vulnerability.

An authenticated command injection vulnerability exists in the HPE Aruba Networking EdgeConnect SD-WAN gateways Command Line Interface. Successful exploitation of this vulnerability results in the ability to execute arbitrary commands as a privileged user on the underlying operating system.

Dell SmartFabric OS10 Software, versions 10.5.6.x, 10.5.5.x, 10.5.4.x, 10.5.3.x, contains an Improper Neutralization of Special Elements used in a Command ('Command Injection') vulnerability. A low privileged attacker with remote access could potentially exploit this vulnerability leading to code execution.

Netgear WG302v2 v5.2.9 and WAG302v2 v5.1.19 were discovered to contain multiple command injection vulnerabilities in the upgrade_handler function via the firmwareRestore and firmwareServerip parameters.

A weakness has been identified in D-Link DIR-816 1.10CNB05_R1B011D88210. Affected by this vulnerability is the function sub_445E7C of the file /goform/formDMZ.cgi. This manipulation causes command injection. It is possible to initiate the attack remotely. The exploit has been made available to the public and could be used for attacks.

A vulnerability, which was classified as critical, was found in D-Link DI-7300G+ and DI-8200G 17.12.20A1/19.12.25A1. This affects an unknown part of the file msp_info.htm. The manipulation of the argument flag/cmd/iface leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used.

In ThreatQuotient ThreatQ before 5.29.3, authenticated users are able to execute arbitrary commands by sending a crafted request to an API endpoint.

Vulnerability in rconfig “remote_text_file” enables an attacker with user level access to the CLI to inject user level commands into Fidelis Network and Deception CommandPost, Collector, Sensor, and Sandbox components as well as neighboring Fidelis components. The vulnerability is present in Fidelis Network and Deception versions prior to 9.4.5. Patches and updates are available to address this vulnerability.

The Symantec Messaging Gateway before 10.6.3-267 can encounter an issue of remote code execution, which describes a situation whereby an individual may obtain the ability to execute commands remotely on a target machine or in a target process. In this type of occurrence, after gaining access to the system, the attacker may attempt to elevate their privileges.

Vulnerability in Fidelis Network and Deception CommandPost enables authenticated command injection through the web interface using the “feed_comm_test” value for the “feed” parameter. The vulnerability could allow a specially crafted HTTP request to execute system commands on the CommandPost and return results in an HTTP response via an authenticated session. The vulnerability is present in Fidelis Network and Deception versions prior to 9.4.5. Patches and updates are available to address this vulnerability.

A vulnerability has been identified in SINEMA Remote Connect Server (All versions < V3.2 HF1). Affected applications are vulnerable to command injection due to missing server side input sanitation when loading SNMP configurations. This could allow an attacker with the right to modify the SNMP configuration to execute arbitrary code with root privileges.

A vulnerability has been identified in SINEMA Remote Connect Server (All versions < V3.2 HF1). Affected applications are vulnerable to command injection due to missing server side input sanitation when loading VxLAN configurations. This could allow an authenticated attacker to execute arbitrary code with root privileges.

Vulnerability in Fidelis Network and Deception CommandPost enables authenticated command injection through the web interface using the “check_vertica_upgrade” value for the “cpIp” parameter. The vulnerability could allow a specially crafted HTTP request to execute system commands on the CommandPost and return results in an HTTP response via an authenticated session. The vulnerability is present in Fidelis Network and Deception versions prior to 9.4.5. Patches and updates are available to address this vulnerability.

Vulnerability in rconfig “cert_utils” enables an attacker with user level access to the CLI to inject root level commands into Fidelis Network and Deception CommandPost, Collector, Sensor, and Sandbox components as well as neighboring Fidelis components. The vulnerability is present in Fidelis Network and Deception versions prior to 9.4.5. Patches and updates are available to address this vulnerability.

Dell SmartFabric OS10 Software, version(s) 10.5.5.4 through 10.5.5.10 and 10.5.6.x , contain(s) an Improper Neutralization of Special Elements used in a Command ('Command Injection') vulnerability. A low privileged attacker with remote access could potentially exploit this vulnerability, leading to Command execution.

GaussDB 200 with version of 6.5.1 have a command injection vulnerability. Due to insufficient input validation, remote attackers with low permissions could exploit this vulnerability by sending crafted commands to the affected device. Successful exploit could allow an attacker to execute commands.

A vulnerability was found in Linksys RE6500, RE6250, RE6300, RE6350, RE7000 and RE9000 1.0.013.001/1.0.04.001/1.0.04.002/1.1.05.003/1.2.07.001. It has been declared as critical. Affected by this vulnerability is the function WPS of the file /goform/WPS. The manipulation of the argument PIN leads to command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

Improper neutralization of special elements used in a user input allows an authenticated malicious user to perform remote code execution in the host system. This vulnerability impacts SonicWall Switch 1.1.1.0-2s and earlier versions

On Mitel 6869i 4.5.0.41 devices, the Manual Firmware Update (upgrade.html) page does not perform sanitization on the username and path parameters (sent by an authenticated user) before appending flags to the busybox ftpget command. This leads to $() command execution.

A vulnerability was detected in D-Link DIR-816 1.10CNB05_R1B011D88210. This affects the function portForward. Performing a manipulation of the argument ip_address results in command injection. The attack can be initiated remotely. The exploit is now public and may be used.

A vulnerability was found in WeiYe-Jing datax-web 2.1.1. It has been classified as critical. This affects an unknown part of the file /api/job/add/. The manipulation of the argument glueSource leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used.

Improper Neutralization of Special Elements used in a Command ('Command Injection') vulnerability in StylemixThemes Consulting Elementor Widgets, StylemixThemes Masterstudy Elementor Widgets allows OS Command Injection.This issue affects Consulting Elementor Widgets: from n/a through 1.3.0; Masterstudy Elementor Widgets: from n/a through 1.2.2.

In Splunk Enterprise versions below 9.2.2, 9.1.5, and 9.0.10 and Splunk Cloud Platform versions below 9.1.2312.109 and 9.1.2308.207, an authenticated user could create an external lookup that calls a legacy internal function. The authenticated user could use this internal function to insert code into the Splunk platform installation directory. From there, the user could execute arbitrary code on the Splunk platform Instance.

A flaw has been found in Wavlink NU516U1 M16U1_V240425. Impacted is the function sub_403010 of the file /cgi-bin/wireless.cgi of the component AddMac Page. This manipulation of the argument macAddr causes command injection. Remote exploitation of the attack is possible. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability has been found in D-Link DIR-823X 250416. Impacted is an unknown function of the file /goform/set_device_name. The manipulation of the argument mac leads to command injection. The attack is possible to be carried out remotely. The exploit has been disclosed to the public and may be used.

A weakness has been identified in D-Link DIR-823X 250416. Affected by this issue is the function sub_412E7C of the file /goform/set_switch_settings. This manipulation of the argument port causes command injection. The attack may be initiated remotely. The exploit has been made available to the public and could be exploited.

A command injection vulnerability in RG-EW series home routers and repeaters v.EW_3.0(1)B11P219, RG-NBS and RG-S1930 series switches v.SWITCH_3.0(1)B11P219, RG-EG series business VPN routers v.EG_3.0(1)B11P219, EAP and RAP series wireless access points v.AP_3.0(1)B11P219, and NBC series wireless controllers v.AC_3.0(1)B11P219 allows an authorized attacker to execute arbitrary commands on remote devices by sending a POST request to /cgi-bin/luci/api/cmd via the remoteIp field.

A vulnerability was identified in D-Link DIR-823X 250416. This affects the function uci_set of the file /goform/set_wifi_blacklists. Such manipulation leads to command injection. It is possible to launch the attack remotely. The exploit is publicly available and might be used.

An authenticated mySCADA myPRO 8.26.0 user may be able to modify parameters to run commands directly in the operating system.

A vulnerability was found in Wavlink NU516U1 M16U1_V240425. The impacted element is the function sub_402D1C of the file /cgi-bin/wireless.cgi of the component DeleteMac Page. Performing manipulation of the argument delete_list results in command injection. The attack is possible to be carried out remotely. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way.

A security vulnerability has been detected in Wavlink NU516U1 240425. Impacted is the function advance of the file /cgi-bin/wireless.cgi. Such manipulation of the argument wlan_conf/Channel/skiplist/ieee_80211h leads to os command injection. The attack may be launched remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure.

A weakness has been identified in Wavlink NU516U1. Affected by this vulnerability is the function sub_401B30 of the file /cgi-bin/firewall.cgi. This manipulation of the argument remoteManagementEnabled causes command injection. The attack can be initiated remotely. The exploit has been made available to the public and could be exploited. The vendor was contacted early about this disclosure but did not respond in any way.

A remote code execution vulnerability was identified in GitHub Enterprise Server that could be exploited when building a GitHub Pages site. User-controlled configuration of the underlying parsers used by GitHub Pages were not sufficiently restricted and made it possible to execute commands on the GitHub Enterprise Server instance. To exploit this vulnerability, an attacker would need permission to create and build a GitHub Pages site on the GitHub Enterprise Server instance. This vulnerability affected all versions of GitHub Enterprise Server prior to 2.22 and was fixed in 2.21.6, 2.20.15, and 2.19.21. The underlying issues contributing to this vulnerability were identified both internally and through the GitHub Security Bug Bounty program.

A vulnerability was found in samanhappy MCPHub up to 0.9.10. Affected by this issue is some unknown functionality of the file src/controllers/serverController.ts. The manipulation of the argument command/args results in os command injection. The attack can be launched remotely. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way.

A security flaw has been discovered in Tenda HG3 2.0 300003070. This vulnerability affects the function formgponConf of the file /boaform/admin/formgponConf. The manipulation of the argument fmgpon_loid results in os command injection. It is possible to launch the attack remotely. The exploit has been released to the public and may be used for attacks.

A vulnerability was determined in D-Link DIR-823X 240126/240802/250416. Affected by this vulnerability is an unknown functionality of the file /usr/sbin/goahead. This manipulation of the argument port causes command injection. The attack can be initiated remotely. The exploit has been publicly disclosed and may be utilized.

A vulnerability was identified in Wavlink NU516U1 M16U1_V240425. This affects the function wifi_region of the file /cgi-bin/adm.cgi. Such manipulation of the argument skiplist1/skiplist2 leads to os command injection. The attack can be launched remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure.

A vulnerability was detected in Wavlink NU516U1 240425. The affected element is the function WifiBasic of the file /cgi-bin/wireless.cgi. Performing a manipulation of the argument AuthMethod/EncrypType results in os command injection. Remote exploitation of the attack is possible. The exploit is now public and may be used. The vendor was contacted early about this disclosure.

A vulnerability was found in Wavlink NU516U1 M16U1_V240425. Affected by this vulnerability is the function wzdrepeater of the file /cgi-bin/adm.cgi. The manipulation of the argument wlan_bssid/sel_Automode/sel_EncrypTyp results in os command injection. It is possible to launch the attack remotely. The exploit has been made public and could be used. The vendor was contacted early about this disclosure.

A vulnerability was identified in Wavlink NU516U1 M16U1_V240425. This impacts the function sub_403198 of the file /cgi-bin/wireless.cgi of the component SetName Page. The manipulation of the argument mac_5g leads to command injection. It is possible to initiate the attack remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was detected in Belkin F9K1015 1.00.10. Affected is an unknown function of the file /goform/mp. Performing a manipulation of the argument command results in command injection. The attack may be initiated remotely. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A flaw has been found in D-Link DIR-823X 250416. This issue affects some unknown processing of the file /goform/diag_traceroute. Executing manipulation of the argument target_addr can lead to command injection. The attack can be executed remotely. The exploit has been published and may be used.

A vulnerability was found in TOTOLINK A3100R 4.1.2cu.5050_B20200504. It has been declared as critical. This vulnerability affects the function setTelnetCfg of the file /cgi-bin/cstecgi.cgi of the component HTTP POST Request Handler. The manipulation of the argument telnet_enabled leads to command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-272572. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was detected in Tenda AC7 15.03.06.44. This vulnerability affects unknown code of the file /goform/AdvSetLanip. The manipulation of the argument lanIp results in command injection. It is possible to launch the attack remotely. The exploit is now public and may be used.