snappy-java is a Java port of the snappy, a fast C++ compresser/decompresser developed by Google. The SnappyInputStream was found to be vulnerable to Denial of Service (DoS) attacks when decompressing data with a too large chunk size. Due to missing upper bound check on chunk length, an unrecoverable fatal error can occur. All versions of snappy-java including the latest released version 1.1.10.3 are vulnerable to this issue. A fix has been introduced in commit `9f8c3cf74` which will be included in the 1.1.10.4 release. Users are advised to upgrade. Users unable to upgrade should only accept compressed data from trusted sources.

snappy-java is a fast compressor/decompressor for Java. Due to unchecked multiplications, an integer overflow may occur in versions prior to 1.1.10.1, causing an unrecoverable fatal error. The function `compress(char[] input)` in the file `Snappy.java` receives an array of characters and compresses it. It does so by multiplying the length by 2 and passing it to the rawCompress` function. Since the length is not tested, the multiplication by two can cause an integer overflow and become negative. The rawCompress function then uses the received length and passes it to the natively compiled maxCompressedLength function, using the returned value to allocate a byte array. Since the maxCompressedLength function treats the length as an unsigned integer, it doesn’t care that it is negative, and it returns a valid value, which is casted to a signed integer by the Java engine. If the result is negative, a `java.lang.NegativeArraySizeException` exception will be raised while trying to allocate the array `buf`. On the other side, if the result is positive, the `buf` array will successfully be allocated, but its size might be too small to use for the compression, causing a fatal Access Violation error. The same issue exists also when using the `compress` functions that receive double, float, int, long and short, each using a different multiplier that may cause the same issue. The issue most likely won’t occur when using a byte array, since creating a byte array of size 0x80000000 (or any other negative value) is impossible in the first place. Version 1.1.10.1 contains a patch for this issue.

snappy-java is a fast compressor/decompressor for Java. Due to unchecked multiplications, an integer overflow may occur in versions prior to 1.1.10.1, causing a fatal error. The function `shuffle(int[] input)` in the file `BitShuffle.java` receives an array of integers and applies a bit shuffle on it. It does so by multiplying the length by 4 and passing it to the natively compiled shuffle function. Since the length is not tested, the multiplication by four can cause an integer overflow and become a smaller value than the true size, or even zero or negative. In the case of a negative value, a `java.lang.NegativeArraySizeException` exception will raise, which can crash the program. In a case of a value that is zero or too small, the code that afterwards references the shuffled array will assume a bigger size of the array, which might cause exceptions such as `java.lang.ArrayIndexOutOfBoundsException`. The same issue exists also when using the `shuffle` functions that receive a double, float, long and short, each using a different multiplier that may cause the same issue. Version 1.1.10.1 contains a patch for this vulnerability.

Ubiquiti EdgeMAX devices before 2.0.3 allow remote attackers to cause a denial of service (disk consumption) because *.cache files in /var/run/beaker/container_file/ are created when providing a valid length payload of 249 characters or fewer to the beaker.session.id cookie in a GET header. The attacker can use a long series of unique session IDs.

SHAREit through 4.0.6.177 does not check the body length from the received packet header (which is used to allocate memory for the next set of data). This could lead to a system denial of service due to uncontrolled memory allocation.

An issue was discovered in GitLab Community and Enterprise Edition 8.15 through 12.2.1. Particular mathematical expressions in GitLab Markdown can exhaust client resources.

Multiple vulnerabilities in the Cisco ATA 190 Series Analog Telephone Adapter Software could allow an attacker to perform a command injection attack resulting in remote code execution or cause a denial of service (DoS) condition on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

SHAREit through 4.0.6.177 does not check the full message length from the received packet header (which is used to allocate memory for the next set of data). This could lead to a system denial of service due to uncontrolled memory allocation. This is different from CVE-2019-14941.

Due to insufficient length validation in the Open5GS GTP library versions prior to versions 2.4.13 and 2.5.7, when parsing extension headers in GPRS tunneling protocol (GPTv1-U) messages, a protocol payload with any extension header length set to zero causes an infinite loop. The affected process becomes immediately unresponsive, resulting in denial of service and excessive resource consumption. CVSS3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C

FreeRDP is a free implementation of the Remote Desktop Protocol. Prior to version 3.5.1, a malicious server can crash the FreeRDP client by sending invalid huge allocation size. Version 3.5.1 contains a patch for the issue. No known workarounds are available.

When reading a specially crafted 7Z archive, Compress can be made to allocate large amounts of memory that finally leads to an out of memory error even for very small inputs. This could be used to mount a denial of service attack against services that use Compress' sevenz package.

Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine. Prior to 7.0.5 and 6.0.19, a small amount of HTTP/2 traffic can lead to Suricata using a large amount of memory. The issue has been addressed in Suricata 7.0.5 and 6.0.19. Workarounds include disabling the HTTP/2 parser and reducing `app-layer.protocols.http2.max-table-size` value (default is 65536).

IBM MQ 9.0 LTS, 9.1 LTS, 9.2 LTS, 9.3 LTS and 9.3 CD, in certain configurations, is vulnerable to a denial of service attack caused by an error processing messages when an API Exit using MQBUFMH is used. IBM X-Force ID: 290259.

In WAGO I/O-Check Service in multiple products an unauthenticated remote attacker can send a specially crafted packet containing OS commands to provoke a denial of service.

In BIP-IP versions 17.0.x before 17.0.0.2, 16.1.x before 16.1.3.3, 15.1.x before 15.1.8.1, 14.1.x before 14.1.5.3, and all versions of 13.1.x, when OCSP authentication profile is configured on a virtual server, undisclosed requests can cause an increase in CPU resource utilization. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.

Pimcore is an Open Source Data & Experience Management Platform. The Pimcore thumbnail generation can be used to flood the server with large files. By changing the file extension or scaling factor of the requested thumbnail, attackers can create files that are much larger in file size than the original. This vulnerability is fixed in 11.2.4.

The LevelOne WBR-6012 router with firmware R0.40e6 is vulnerable to improper resource allocation within its web application, where a series of crafted HTTP requests can cause a reboot. This could lead to network service interruptions.

When reading a specially crafted TAR archive, Compress can be made to allocate large amounts of memory that finally leads to an out of memory error even for very small inputs. This could be used to mount a denial of service attack against services that use Compress' tar package.

An Allocation of Resources Without Limits or Throttling vulnerability in the Packet Forwarding Engine (PFE) of Juniper Networks Junos OS allows a network-based, unauthenticated attacker to cause a Denial of Service (DoS). On QFX10K Series, Inter-Chassis Control Protocol (ICCP) is used in MC-LAG topologies to exchange control information between the devices in the topology. ICCP connection flaps and sync issues will be observed due to excessive specific traffic to the local device. This issue affects Juniper Networks Junos OS on QFX10K Series: * All versions prior to 20.2R3-S7; * 20.4 versions prior to 20.4R3-S4; * 21.1 versions prior to 21.1R3-S3; * 21.2 versions prior to 21.2R3-S1; * 21.3 versions prior to 21.3R3; * 21.4 versions prior to 21.4R3; * 22.1 versions prior to 22.1R2.

In doInBackground of NotificationContentInflater.java, there is a possible temporary denial or service due to long running operations. This could lead to remote denial of service with no additional execution privileges needed. User interaction is not needed for exploitation.Product: AndroidVersions: Android-11 Android-12 Android-12L Android-13Android ID: A-252766417

ABB, Phoenix Contact, Schneider Electric, Siemens, WAGO - Programmable Logic Controllers, multiple versions. Researchers have found some controllers are susceptible to a denial-of-service attack due to a flood of network packets.

Phoenix Contact Classic Line Controllers ILC1x0 and ILC1x1 in all versions/variants are affected by a Denial-of-Service vulnerability. The communication protocols and device access do not feature authentication measures. Remote attackers can use specially crafted IP packets to cause a denial of service on the PLC's network communication module. A successful attack stops all network communication. To restore the network connectivity the device needs to be restarted. The automation task is not affected.

The web api server on Port 8080 of ASUS HG100 firmware up to 1.05.12, which is vulnerable to Slowloris HTTP Denial of Service: an attacker can cause a Denial of Service (DoS) by sending headers very slowly to keep HTTP or HTTPS connections and associated resources alive for a long period of time. CVSS 3.0 Base score 7.4 (Availability impacts). CVSS vector: (CVSS:3.0/AV:A/AC:L/PR:N/UI:N/S:C/C:N/I:N/A:H).

EMQ X Broker versions prior to 4.2.8 are vulnerable to a denial of service attack as a result of excessive memory consumption due to the handling of untrusted inputs. These inputs cause the message broker to consume large amounts of memory, resulting in the application being terminated by the operating system.

An issue in the cs_bind_ubat component of MonetDB Server v11.45.17 and v11.46.0 allows attackers to cause a Denial of Service (DoS) via crafted SQL statements.

The Zone Controller service in the Zoom On-Premise Meeting Connector Controller before version 4.6.358.20210205 does not verify the cnt field sent in incoming network packets, which leads to exhaustion of resources and system crash.

A vulnerability in the XCP Authentication Service of the Cisco Unified Communications Manager IM & Presence Service (Unified CM IM&P) could allow an unauthenticated, remote attacker to cause a temporary service outage for all Cisco Unified CM IM&P users who are attempting to authenticate to the service, resulting in a denial of service (DoS) condition. This vulnerability is due to improper validation of user-supplied input. An attacker could exploit this vulnerability by sending a crafted login message to the affected device. A successful exploit could allow the attacker to cause an unexpected restart of the authentication service, preventing new users from successfully authenticating. Exploitation of this vulnerability does not impact Cisco Unified CM IM&P users who were authenticated prior to an attack.

Redis is an open source, in-memory database that persists on disk. When parsing an incoming Redis Standard Protocol (RESP) request, Redis allocates memory according to user-specified values which determine the number of elements (in the multi-bulk header) and size of each element (in the bulk header). An attacker delivering specially crafted requests over multiple connections can cause the server to allocate significant amount of memory. Because the same parsing mechanism is used to handle authentication requests, this vulnerability can also be exploited by unauthenticated users. The problem is fixed in Redis versions 6.2.6, 6.0.16 and 5.0.14. An additional workaround to mitigate this problem without patching the redis-server executable is to block access to prevent unauthenticated users from connecting to Redis. This can be done in different ways: Using network access control tools like firewalls, iptables, security groups, etc. or Enabling TLS and requiring users to authenticate using client side certificates.

Cosign provides code signing and transparency for containers and binaries. Prior to version 2.2.4, maliciously-crafted software artifacts can cause denial of service of the machine running Cosign thereby impacting all services on the machine. The root cause is that Cosign creates slices based on the number of signatures, manifests or attestations in untrusted artifacts. As such, the untrusted artifact can control the amount of memory that Cosign allocates. The exact issue is Cosign allocates excessive memory on the lines that creates a slice of the same length as the manifests. Version 2.2.4 contains a patch for the vulnerability.

Octobox is software for managing GitHub notifications. Prior to pull request (PR) 2807, a user of the system can provide a specifically crafted search query string that will trigger a ReDoS vulnerability. This issue is fixed in PR 2807.

An issue was discovered in glFTPd 2.11a that allows remote attackers to cause a denial of service via exceeding the connection limit.

Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine developed by the OISF and the Suricata community. When parsing an overly long SSH banner, Suricata can use excessive CPU resources, as well as cause excessive logging volume in alert records. This issue has been patched in versions 6.0.17 and 7.0.4.

LibHTP is a security-aware parser for the HTTP protocol and the related bits and pieces. Version 0.5.46 may parse malformed request traffic, leading to excessive CPU usage. Version 0.5.47 contains a patch for the issue. No known workarounds are available.

A Regular Expression Denial of Service (ReDOS) vulnerability was discovered in Mpmath v1.0.0 through v1.2.1 when the mpmathify function is called.

IBM Secure External Authentication Server 2.4.3.2, 6.0.1, 6.0.2 and IBM Secure Proxy 3.4.3.2, 6.0.1, 6.0.2 could allow a remote user to consume resources causing a denial of service due to a resource leak.

An issue was discovered in the parse_duration crate through 2021-03-18 for Rust. It allows attackers to cause a denial of service (CPU and memory consumption) via a duration string with a large exponent.

kopano-ical (formerly zarafa-ical) in Kopano Groupware Core through 8.7.16, 9.x through 9.1.0, 10.x through 10.0.7, and 11.x through 11.0.1 and Zarafa 6.30.x through 7.2.x allows memory exhaustion via long HTTP headers.

It was found that the fix for CVE-2018-14648 in 389-ds-base, versions 1.4.0.x before 1.4.0.17, was incorrectly applied in RHEL 7.5. An attacker would still be able to provoke excessive CPU consumption leading to a denial of service.

A vulnerability in a logging API in Cisco Firepower Management Center (FMC) Software could allow an unauthenticated, remote attacker to cause the device to become unresponsive or trigger an unexpected reload. This vulnerability could also allow an attacker with valid user credentials, but not Administrator privileges, to view a system log file that they would not normally have access to. This vulnerability is due to a lack of rate-limiting of requests that are sent to a specific API that is related to an FMC log. An attacker could exploit this vulnerability by sending a high rate of HTTP requests to the API. A successful exploit could allow the attacker to cause a denial of service (DoS) condition due to the FMC CPU spiking to 100 percent utilization or to the device reloading. CPU utilization would return to normal if the attack traffic was stopped before an unexpected reload was triggered.

Sydent is a reference Matrix identity server. Sydent does not limit the size of requests it receives from HTTP clients. A malicious user could send an HTTP request with a very large body, leading to memory exhaustion and denial of service. Sydent also does not limit response size for requests it makes to remote Matrix homeservers. A malicious homeserver could return a very large response, again leading to memory exhaustion and denial of service. This affects any server which accepts registration requests from untrusted clients. This issue has been patched by releases 89071a1, 0523511, f56eee3. As a workaround request sizes can be limited in an HTTP reverse-proxy. There are no known workarounds for the problem with overlarge responses.

Specific IPv6 DHCP packets received by the jdhcpd daemon will cause a memory resource consumption issue to occur on a Junos OS device using the jdhcpd daemon configured to respond to IPv6 requests. Once started, memory consumption will eventually impact any IPv4 or IPv6 request serviced by the jdhcpd daemon, thus creating a Denial of Service (DoS) condition to clients requesting and not receiving IP addresses. Additionally, some clients which were previously holding IPv6 addresses will not have their IPv6 Identity Association (IA) address and network tables agreed upon by the jdhcpd daemon after the failover event occurs, which leads to more than one interface, and multiple IP addresses, being denied on the client. Affected releases are Juniper Networks Junos OS: 17.4 versions prior to 17.4R2; 18.1 versions prior to 18.1R2.

An issue has been discovered in GitLab CE/EE affecting all versions starting from 15.7 prior to 16.9.7, starting from 16.10 prior to 16.10.5, and starting from 16.11 prior to 16.11.2. It was possible for an attacker to cause a denial of service by crafting unusual search terms for branch names.

Insufficient file size checks resulted in a denial of service risk in the file picker's unzip functionality.

Mintty before 3.4.5 allows remote servers to cause a denial of service (Windows GUI hang) by telling the Mintty window to change its title repeatedly at high speed, which results in many SetWindowTextA or SetWindowTextW calls. In other words, it does not implement a usleep or similar delay upon processing a title change.

A stack overflow in pupnp before version 1.14.5 can cause the denial of service through the Parser_parseDocument() function. ixmlNode_free() will release a child node recursively, which will consume stack space and lead to a crash.

A vulnerability has been identified in SIMATIC HMI Comfort Outdoor Panels V15 7\" & 15\" (incl. SIPLUS variants) (All versions < V15.1 Update 6), SIMATIC HMI Comfort Outdoor Panels V16 7\" & 15\" (incl. SIPLUS variants) (All versions < V16 Update 4), SIMATIC HMI Comfort Panels V15 4\" - 22\" (incl. SIPLUS variants) (All versions < V15.1 Update 6), SIMATIC HMI Comfort Panels V16 4\" - 22\" (incl. SIPLUS variants) (All versions < V16 Update 4), SIMATIC HMI KTP Mobile Panels V15 KTP400F, KTP700, KTP700F, KTP900 and KTP900F (All versions < V15.1 Update 6), SIMATIC HMI KTP Mobile Panels V16 KTP400F, KTP700, KTP700F, KTP900 and KTP900F (All versions < V16 Update 4), SIMATIC WinCC Runtime Advanced V15 (All versions < V15.1 Update 6), SIMATIC WinCC Runtime Advanced V16 (All versions < V16 Update 4), SINAMICS GH150 (All versions), SINAMICS GL150 (with option X30) (All versions), SINAMICS GM150 (with option X30) (All versions), SINAMICS SH150 (All versions), SINAMICS SL150 (All versions), SINAMICS SM120 (All versions), SINAMICS SM150 (All versions), SINAMICS SM150i (All versions). SmartVNC has a heap allocation leak vulnerability in the server Tight encoder, which could result in a Denial-of-Service condition.

Very large headers can cause resource exhaustion when parsing message. The message-parser normally reads reasonably sized chunks of the message. However, when it feeds them to message-header-parser, it starts building up "full_value" buffer out of the smaller chunks. The full_value buffer has no size limit, so large headers can cause large memory usage. It doesn't matter whether it's a single long header line, or a single header split into multiple lines. This bug exists in all Dovecot versions. Incoming mails typically have some size limits set by MTA, so even largest possible header size may still fit into Dovecot's vsz_limit. So attackers probably can't DoS a victim user this way. A user could APPEND larger mails though, allowing them to DoS themselves (although maybe cause some memory issues for the backend in general). One can implement restrictions on headers on MTA component preceding Dovecot. No publicly available exploits are known.

An Environment (CWE-2) vulnerability exists in SoMachine Basic, all versions, and Modicon M221(all references, all versions prior to firmware V1.10.0.0) which could cause cycle time impact when flooding the M221 ethernet interface while the Ethernet/IP adapter is activated.