A remote, unauthenticated attacker could cause a denial-of-service of PHOENIX CONTACT FL MGUARD and TC MGUARD devices below version 8.9.0 by sending a larger number of unauthenticated HTTPS connections originating from different source IP’s. Configuring firewall limits for incoming connections cannot prevent the issue.

ABB, Phoenix Contact, Schneider Electric, Siemens, WAGO - Programmable Logic Controllers, multiple versions. Researchers have found some controllers are susceptible to a denial-of-service attack due to a flood of network packets.

An unauthenticated remote attacker can cause a Denial of Service by sending a large number of requests to the http service on port 80.

An unauthenticated remote attacker can cause a Denial of Service by turning off the output of the UPS via Modbus command.

In Phoenix Contact FL SWITCH SMCS series products in multiple versions if an attacker sends a hand-crafted TCP-Packet with the Urgent-Flag set and the Urgent-Pointer set to 0, the network stack will crash. The device needs to be rebooted afterwards.

An unauthenticated remote attacker can DoS the control agent due to a out-of-bounds read which may prevent or disrupt the charging functionality. 

Uncontrolled Resource Consumption can be exploited to cause the Phoenix Contact HMIs BTP 2043W, BTP 2070W and BTP 2102W in all versions to become unresponsive and not accurately update the display content (Denial of Service).

Multiple Phoenix Contact PLCnext control devices in versions prior to 2021.0.5 LTS are prone to a DoS attack through special crafted JSON requests.

In Phoenix Contact FL MGUARD 1102 and 1105 in Versions 1.4.0, 1.4.1 and 1.5.0 the remote logging functionality is impaired by the lack of memory release for data structures from syslog-ng when remote logging is active

An issue was discovered on PHOENIX CONTACT AXL F BK PN <=1.0.4, AXL F BK ETH <= 1.12, and AXL F BK ETH XC <= 1.11 devices and Bosch Rexroth S20-ETH-BK and Rexroth S20-PN-BK+ (the S20-PN-BK+/S20-ETH-BK fieldbus couplers sold by Bosch Rexroth contain technology from Phoenix Contact). Incorrect handling of a request with non-standard symbols allows remote attackers to initiate a complete lock up of the bus coupler. Authentication of the request is not required.

In Phoenix Contact FL COMSERVER UNI in versions < 2.40 a invalid Modbus exception response can lead to a temporary denial of service.

An unauthenticated remote attacker can DoS a control agent due to access of a uninitialized pointer which may prevent or disrupt the charging functionality.

A low privileged remote attacker can run the webshell with an empty command containing whitespace. The server will then block until it receives more data, resulting in a DoS condition of the websserver.

A low privileged remote attacker can use the ssh feature to execute commands directly after login. The process stays open and uses resources which leads to a reduced performance of the management functions. Switching functionality is not affected.

An unauthanticated remote attacker can perform a DoS of the Modbus service by sending a specific function and sub-function code without affecting the core functionality.

An unauthenticated remote attacker can exploit the behavior of the pathfinder TCP encapsulation service by establishing a high number of TCP connections to the pathfinder TCP encapsulation service. The impact is limited to blocking of valid IPsec VPN peers.

A vulnerability has been identified in SIMATIC HMI Comfort Outdoor Panels V15 7\" & 15\" (incl. SIPLUS variants) (All versions < V15.1 Update 6), SIMATIC HMI Comfort Outdoor Panels V16 7\" & 15\" (incl. SIPLUS variants) (All versions < V16 Update 4), SIMATIC HMI Comfort Panels V15 4\" - 22\" (incl. SIPLUS variants) (All versions < V15.1 Update 6), SIMATIC HMI Comfort Panels V16 4\" - 22\" (incl. SIPLUS variants) (All versions < V16 Update 4), SIMATIC HMI KTP Mobile Panels V15 KTP400F, KTP700, KTP700F, KTP900 and KTP900F (All versions < V15.1 Update 6), SIMATIC HMI KTP Mobile Panels V16 KTP400F, KTP700, KTP700F, KTP900 and KTP900F (All versions < V16 Update 4), SIMATIC WinCC Runtime Advanced V15 (All versions < V15.1 Update 6), SIMATIC WinCC Runtime Advanced V16 (All versions < V16 Update 4), SINAMICS GH150 (All versions), SINAMICS GL150 (with option X30) (All versions), SINAMICS GM150 (with option X30) (All versions), SINAMICS SH150 (All versions), SINAMICS SL150 (All versions), SINAMICS SM120 (All versions), SINAMICS SM150 (All versions), SINAMICS SM150i (All versions). SmartVNC has a heap allocation leak vulnerability in the server Tight encoder, which could result in a Denial-of-Service condition.

guests may exceed their designated memory limit When a guest is permitted to have close to 16TiB of memory, it may be able to issue hypercalls to increase its memory allocation beyond the administrator established limit. This is a result of a calculation done with 32-bit precision, which may overflow. It would then only be the overflowed (and hence small) number which gets compared against the established upper bound.

A flaw was found in Undertow where malformed client requests can trigger server-side stream resets without triggering abuse counters. This issue, referred to as the "MadeYouReset" attack, allows malicious clients to induce excessive server workload by repeatedly causing server-side stream aborts. While not a protocol bug, this highlights a common implementation weakness that can be exploited to cause a denial of service (DoS).

A flaw was found in 389-ds-base. The get_ldapmessage_controls_ext() function in the LDAP server does not enforce an upper bound on the number of controls per LDAP message. A remote, unauthenticated attacker can send a specially crafted LDAP request containing hundreds of thousands of minimal controls within the default maximum BER message size (2 MB), causing excessive CPU consumption and heap allocation on the server. Under concurrent exploitation, this leads to significant latency degradation, worker thread starvation, or out-of-memory termination, resulting in a denial of service.

VMware Workspace ONE UEM REST API contains a denial of service vulnerability. A malicious actor with access to /API/system/admins/session could cause an API denial of service due to improper rate limiting.

Denial of Service issue in GraphQL endpoints in Gitlab EE/CE affecting all versions from 11.10 prior to 18.2.7, 18.3 prior to 18.3.3, and 18.4 prior to 18.4.1 allows unauthenticated users to potentially bypass query complexity limits leading to resource exhaustion and service disruption.

GitLab has remediated an issue in GitLab CE/EE affecting all versions from 10.8 before 18.6.6, 18.7 before 18.7.4, and 18.8 before 18.8.4 that, under certain conditions, could have allowed an unauthenticated user to cause denial of service by sending repeated GraphQL queries.

ESXi contains a slow HTTP POST denial-of-service vulnerability in rhttpproxy. A malicious actor with network access to ESXi may exploit this issue to create a denial-of-service condition by overwhelming rhttpproxy service with multiple requests.

Starlette is a lightweight ASGI framework/toolkit. From 0.4.1 until 1.3.1, request.form() accepts max_fields and max_part_size to bound resource consumption while parsing form data. These limits are enforced for multipart/form-data, but silently ignored for application/x-www-form-urlencoded. An unauthenticated attacker can therefore send a urlencoded body with an arbitrarily large number of fields or an arbitrarily large field, even when the application configured limits it believed would apply. This vulnerability is fixed in 1.3.1.

An issue in Assimp v.6.0.2 allows a remote attacker to cause a denial of service via the FBXConverter.cpp and ConvertMeshMultiMaterial() method

A flaw was discovered in Undertow in versions before Undertow 2.1.1.Final where certain requests to the "Expect: 100-continue" header may cause an out of memory error. This flaw may potentially lead to a denial of service.

A vulnerability was found in Keycloak before 11.0.1 where DoS attack is possible by sending twenty requests simultaneously to the specified keycloak server, all with a Content-Length header value that exceeds the actual byte count of the request body.

AIOHTTP is an asynchronous HTTP client/server framework for asyncio and Python. Versions 3.13.2 and below allow a request to be crafted in such a way that an AIOHTTP server's memory fills up uncontrollably during processing. If an application includes a handler that uses the Request.post() method, an attacker may be able to freeze the server by exhausting the memory. This issue is fixed in version 3.13.3.

ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to versions 6.9.13-50 and 7.1.2-25, a missing check for maximum memory request in AcquireAlignedMemory could trigger an out-of-Memory condition. This issue has been patched in versions 6.9.13-50 and 7.1.2-25.

The SSH daemon on MikroTik routers through v6.44.3 could allow remote attackers to generate CPU activity, trigger refusal of new authorized connections, and cause a reboot via connect and write system calls, because of uncontrolled resource management.

Impact: The undici WebSocket client enforces maxPayloadSize per-frame but does not enforce the cumulative size of fragmented uncompressed messages. A malicious WebSocket server can stream many small fragments that each pass per-frame validation but collectively exceed the configured limit, causing unbounded memory growth in the client process. The result is memory exhaustion and a denial of service. Affected applications are those using the undici WebSocket client (new WebSocket(...)) that can be induced to connect to an attacker-controlled or compromised WebSocket endpoint. This is a regression specific to undici 8.1.0. The 6.25.0 line shipped the equivalent cumulative check from the start and is unaffected. The 7.x line never had the maxPayloadSize feature and is also unaffected. Patches: Upgrade to undici >= 8.5.0. Workarounds: No workaround is available. The fix must be applied through an upgrade.

In OpenStack Ironic 32 before 37.0.0, an unauthenticated malicious user could submit a crafted JSON string to some endpoints on the API or JSON-RPC service and effect a service crash.

AIOHTTP is an asynchronous HTTP client/server framework for asyncio and Python. Versions 3.13.2 and below allow a zip bomb to be used to execute a DoS against the AIOHTTP server. An attacker may be able to send a compressed request that when decompressed by AIOHTTP could exhaust the host's memory. This issue is fixed in version 3.13.3.

CoreDNS is a DNS server that chains plugins. Prior to version 1.14.0, multiple CoreDNS server implementations (gRPC, HTTPS, and HTTP/3) lack critical resource-limiting controls. An unauthenticated remote attacker can exhaust memory and degrade or crash the server by opening many concurrent connections, streams, or sending oversized request bodies. The issue is similar in nature to CVE-2025-47950 (QUIC DoS) but affects additional server types that do not enforce connection limits, stream limits, or message size constraints. Version 1.14.0 contains a patch.

GitLab has remediated an issue in GitLab CE/EE affecting all versions from 12.10 before 18.10.8, 18.11 before 18.11.5, and 19.0 before 19.0.2 that under certain conditions could have allowed an unauthenticated user to cause denial of service due to improper input validation in the API request parsing middleware.

Expr is an expression language and expression evaluation for Go. Prior to version 1.17.7, several builtin functions in Expr, including `flatten`, `min`, `max`, `mean`, and `median`, perform recursive traversal over user-provided data structures without enforcing a maximum recursion depth. If the evaluation environment contains deeply nested or cyclic data structures, these functions may recurse indefinitely until exceed the Go runtime stack limit. This results in a stack overflow panic, causing the host application to crash. While exploitability depends on whether an attacker can influence or inject cyclic or pathologically deep data into the evaluation environment, this behavior represents a denial-of-service (DoS) risk and affects overall library robustness. Instead of returning a recoverable evaluation error, the process may terminate unexpectedly. In affected versions, evaluation of expressions that invoke certain builtin functions on untrusted or insufficiently validated data structures can lead to a process-level crash due to stack exhaustion. This issue is most relevant in scenarios where Expr is used to evaluate expressions against externally supplied or dynamically constructed environments; cyclic references (directly or indirectly) can be introduced into arrays, maps, or structs; and there are no application-level safeguards preventing deeply nested input data. In typical use cases with controlled, acyclic data, the issue may not manifest. However, when present, the resulting panic can be used to reliably crash the application, constituting a denial of service. The issue has been fixed in the v1.17.7 versions of Expr. The patch introduces a maximum recursion depth limit for affected builtin functions. When this limit is exceeded, evaluation aborts gracefully and returns a descriptive error instead of panicking. Additionally, the maximum depth can be customized by users via `builtin.MaxDepth`, allowing applications with legitimate deep structures to raise the limit in a controlled manner. Users are strongly encouraged to upgrade to the patched release, which includes both the recursion guard and comprehensive test coverage to prevent regressions. For users who cannot immediately upgrade, some mitigations are recommended. Ensure that evaluation environments cannot contain cyclic references, validate or sanitize externally supplied data structures before passing them to Expr, and/or wrap expression evaluation with panic recovery to prevent a full process crash (as a last-resort defensive measure). These workarounds reduce risk but do not fully eliminate the issue without the patch.

Signal K Server is a server application that runs on a central hub in a boat. A Denial of Service (DoS) vulnerability in versions prior to 2.19.0 allows an unauthenticated attacker to crash the SignalK Server by flooding the access request endpoint (`/signalk/v1/access/requests`). This causes a "JavaScript heap out of memory" error due to unbounded in-memory storage of request objects. Version 2.19.0 fixes the issue.

Allocation of resources without limits or throttling vulnerability in Progress Software MOVEit Automation allows Excessive Allocation. This issue affects MOVEit Automation: before 2025.0.11, from 2025.1.0 before 2025.1.7.

FreshRSS is a free, self-hostable RSS aggregator. From version 1.27.0 to before 1.28.0, An attacker could globally deny access to feeds via proxy modifying to 429 Retry-After for a large list of feeds on given instance, making it unusable for majority of users. This issue has been patched in version 1.28.0.

An issue was discovered in MM in Samsung Mobile Processor, Wearable Processor, and Modem Exynos 980, 990, 850, 2100, 1280, 2200, 1330, 1380, 1480, 2400, 1580, W920, W930, W1000, Modem 5123, and Modem 5300. Incorrect handling of 5G NR NAS registration accept messages leads to a Denial of Service.

urllib3 is a user-friendly HTTP client library for Python. Starting in version 1.24 and prior to 2.6.0, the number of links in the decompression chain was unbounded allowing a malicious server to insert a virtually unlimited number of compression steps leading to high CPU usage and massive memory allocation for the decompressed data. This vulnerability is fixed in 2.6.0.

Russh is a Rust SSH client & server library. From version 0.34.0 to before version 0.61.1, when SSH compression is enabled, russh accepted compressed packets whose on-wire size passed the normal transport packet-length checks but whose decompressed size was much larger. This allowed a remote peer to send oversized post-decompression packets that should have been rejected. In current releases, this is a remote denial-of-service / resource-exhaustion issue in the post-decompression receive path. In older releases before 0.58.0, the same remote decompression path used CryptoVec, which appears to make the historical impact worse. This issue has been patched in version 0.61.1.

XWiki is an open-source wiki software platform. Versions 16.10.10 and below, 17.0.0-rc-1 through 17.4.3 and 17.5.0-rc-1 through 17.6.0 contain a REST API which doesn't enforce any limits for the number of items that can be requested in a single request at the moment. Depending on the number of pages in the wiki and the memory configuration, this can lead to slowness and unavailability of the wiki. As an example, the /rest/wikis/xwiki/spaces resource returns all spaces on the wiki by default, which are basically all pages. This issue is fixed in versions 17.4.4 and 16.10.11.

An issue was discovered in 3S-Smart CODESYS V3 products. A crafted communication request may cause uncontrolled memory allocations in the affected CODESYS products and may result in a denial-of-service condition. All variants of the following CODESYS V3 products in all versions prior to v3.5.14.20 that contain the CmpGateway component are affected, regardless of the CPU type or operating system: CODESYS Control for BeagleBone, CODESYS Control for emPC-A/iMX6, CODESYS Control for IOT2000, CODESYS Control for Linux, CODESYS Control for PFC100, CODESYS Control for PFC200, CODESYS Control for Raspberry Pi, CODESYS Control V3 Runtime System Toolkit, CODESYS Gateway V3, CODESYS V3 Development System.

Some HTTP/2 implementations are vulnerable to a flood of empty frames, potentially leading to a denial of service. The attacker sends a stream of frames with an empty payload and without the end-of-stream flag. These frames can be DATA, HEADERS, CONTINUATION and/or PUSH_PROMISE. The peer spends time processing each frame disproportionate to attack bandwidth. This can consume excess CPU.