On Coldcard MK1 and MK2 devices, a side channel for the row-based OLED display was found. The power consumption of each row-based display cycle depends on the number of illuminated pixels, allowing a partial recovery of display contents. For example, a hardware implant in the USB cable might be able to leverage this behavior to recover confidential secrets such as the PIN and BIP39 mnemonic. In other words, the side channel is relevant only if the attacker has enough control over the device's USB connection to make power-consumption measurements at a time when secret data is displayed. The side channel is not relevant in other circumstances, such as a stolen device that is not currently displaying secret data. On Coldcard MK1 and MK2 devices, a side channel for the row-based OLED display was found. The power consumption of each row-based display cycle depends on the number of illuminated pixels, allowing a partial recovery of display contents. For example, a hardware implant in the USB cable might be able to leverage this behavior to recover confidential secrets such as the PIN and BIP39 mnemonic. In other words, the side channel is relevant only if the attacker has enough control over the device's USB connection to make power-consumption measurements at a time when secret data is displayed. The side channel is not relevant in other circumstances, such as a stolen device that is not currently displaying secret data. NOTE: At Coinkite, we’ve already mitigated it, even though we feel strongly that it is not a legitimate issue. In our opinion, it is both unproven (might not even work) and also completely impractical—even if it could be made to work perfectly

The RSA and DSA decryption code in Nettle makes it easier for attackers to discover private keys via a cache side channel attack.

Zitadel is open-source identity infrastructure software. ZITADEL administrators can enable a setting called "Ignoring unknown usernames" which helps mitigate attacks that try to guess/enumerate usernames. If enabled, ZITADEL will show the password prompt even if the user doesn't exist and report "Username or Password invalid". While the setting was correctly respected during the login flow, the user's username was normalized leading to a disclosure of the user's existence. This vulnerability is fixed in 2.71.6, 2.70.8, 2.69.9, 2.68.9, 2.67.13, 2.66.16, 2.65.7, 2.64.6, and 2.63.9.

WatchGuard Fireware allows user enumeration, e.g., in the Firebox XML-RPC login handler. A login request that contains a blank password sent to the XML-RPC agent in Fireware v11.12.1 and earlier returns different responses for valid and invalid usernames. An attacker could exploit this vulnerability to enumerate valid usernames on an affected Firebox.

Redmine before 4.0.9 and 4.1.x before 4.1.3 allows an attacker to learn the values of internal authentication keys by observing timing differences in string comparison operations within SysController and MailHandlerController.

An issue was discovered in OpenSlides before 4.2.5. During login at the /system/auth/login/ endpoint, the system's response times differ depending on whether a user exists in the system. The timing discrepancy stems from the omitted hashing of the password (e.g., more than 100 milliseconds).

A vulnerability, which was classified as problematic, was found in viafintech Barzahlen Payment Module PHP SDK up to 2.0.0. Affected is the function verify of the file src/Webhook.php. The manipulation leads to observable timing discrepancy. The complexity of an attack is rather high. The exploitability is told to be difficult. Upgrading to version 2.0.1 is able to address this issue. The patch is identified as 3e7d29dc0ca6c054a6d6e211f32dae89078594c1. It is recommended to upgrade the affected component. VDB-217650 is the identifier assigned to this vulnerability.

Dropbear 2011.54 through 2018.76 has an inconsistent failure delay that may lead to revealing valid usernames, a different issue than CVE-2018-15599.

HumHub Social Network Kit Enterprise v1.3.13 allows remote attackers to find the user accounts existing on any Social Network Kits (including self-hosted ones) by brute-forcing the username after the /u/ initial URI substring, aka Response Discrepancy Information Exposure.

An issue was discovered in LIVEBOX Collaboration vDesk through v031. An Observable Response Discrepancy can occur under the /api/v1/vdeskintegration/user/isenableuser endpoint, the /api/v1/sharedsearch?search={NAME]+{SURNAME] endpoint, and the /login endpoint. The web application provides different responses to incoming requests in a way that reveals internal state information to an unauthorized actor outside of the intended control sphere.

TP-Link routers, Archer C5 and WR710N-V1, using the latest software, the strcmp function used for checking credentials in httpd, is susceptible to a side-channel attack. By measuring the response time of the httpd process, an attacker could guess each byte of the username and password.

Snipe-IT through 6.0.14 allows attackers to check whether a user account exists because of response variations in a /password/reset request.

Jenkins Generic Webhook Trigger Plugin 1.84.1 and earlier uses a non-constant time comparison function when checking whether the provided and expected webhook token are equal, potentially allowing attackers to use statistical methods to obtain a valid webhook token.

In CentOS-WebPanel.com (aka CWP) CentOS Web Panel 0.9.8.846, the Login process allows attackers to check whether a username is valid by reading the HTTP response.

Jenkins GitLab Plugin 1.5.35 and earlier uses a non-constant time comparison function when checking whether the provided and expected webhook token are equal, potentially allowing attackers to use statistical methods to obtain a valid webhook token.

NVIDIA BMC contains a vulnerability in IPMI handler, where an unauthorized attacker can use certain oracles to guess a valid BMC username, which may lead to an information disclosure.

An issue was discovered in MediaWiki before 1.35.8, 1.36.x and 1.37.x before 1.37.5, and 1.38.x before 1.38.3. HTMLUserTextField exposes the existence of hidden users.

The authentication method in Laravel 8.x through 9.x before 9.32.0 was discovered to be vulnerable to user enumeration via timeless timing attacks with HTTP/2 multiplexing. This is caused by the early return inside the hasValidCredentials method in the Illuminate\Auth\SessionGuard class when a user is found to not exist.

The Splunk Enterprise REST API allows enumeration of usernames via the lockout error message. The potential vulnerability impacts Splunk Enterprise instances before 8.1.7 when configured to repress verbose login errors.

Libgcrypt before 1.8.8 and 1.9.x before 1.9.3 mishandles ElGamal encryption because it lacks exponent blinding to address a side-channel attack against mpi_powm, and the window size is not chosen appropriately. This, for example, affects use of ElGamal in OpenPGP.

In Directus 8.x through 8.8.1, an attacker can discover whether a user is present in the database through the password reset feature. NOTE: This vulnerability only affects products that are no longer supported by the maintainer

Shenzhen Guoxin Synthesis image system before 8.3.0 allows username enumeration because of the response discrepancy of incorrect versus error.

Umbraco is a free and open source .NET content management system. Starting in version 14.0.0 and prior to versions 14.3.2 and 15.1.2, it's possible to determine whether an account exists based on an analysis of response codes and timing of Umbraco management API responses. Versions 14.3.2 and 15.1.2 contain a patch. No known workarounds are available.

A vulnerability in the External Interface of OTRS allows conclusions to be drawn about the existence of user accounts through different HTTP response codes and messages. This enables an attacker to systematically identify valid email addresses. This issue affects: * OTRS 7.0.X * OTRS 8.0.X * OTRS 2023.X * OTRS 2024.X * OTRS 2025.X

In Splunk Enterprise versions below 9.2.2, 9.1.5, and 9.0.10 and Splunk Cloud Platform versions below 9.1.2312.109, an attacker could determine whether or not another user exists on the instance by deciphering the error response that they would likely receive from the instance when they attempt to log in. This disclosure could then lead to additional brute-force password-guessing attacks. This vulnerability would require that the Splunk platform instance uses the Security Assertion Markup Language (SAML) authentication scheme.

IBM Security Identity Manager 7.0.2 could allow a remote user to enumerate usernames due to a difference of responses from valid and invalid login attempts. IBM X-Force ID: 200018

vantage6 is a privacy preserving federated learning infrastructure for secure insight exchange. vantage6 does not inform the user of wrong username/password combination if the username actually exists. This is an attempt to prevent bots from obtaining usernames. However, if a wrong password is entered a number of times, the user account is blocked temporarily. This issue has been fixed in version 3.8.0.

Vulnerability in the JD Edwards EnterpriseOne Tools product of Oracle JD Edwards (component: Web Runtime SEC). Supported versions that are affected are Prior to 9.2.9.0. Easily exploitable vulnerability allows unauthenticated attacker with network access via HTTP to compromise JD Edwards EnterpriseOne Tools. Successful attacks of this vulnerability can result in unauthorized access to critical data or complete access to all JD Edwards EnterpriseOne Tools accessible data. CVSS 3.1 Base Score 7.5 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N).

Flask-AppBuilder is a development framework, built on top of Flask. User enumeration in database authentication in Flask-AppBuilder <= 3.2.3. Allows for a non authenticated user to enumerate existing accounts by timing the response time from the server when you are logging in. Upgrade to version 3.3.0 or higher to resolve.

An unauthenticated remote attacker can gain access to sensitive information including authentication information when using CODESYS OPC UA Server with the non-default Basic128Rsa15 security policy.

The Poll Maker WordPress plugin before 3.4.2 allows unauthenticated users to perform SQL injection via the ays_finish_poll AJAX action. While the result is not disclosed in the response, it is possible to use a timing attack to exfiltrate data such as password hash.

By checking the result of calls to `window.open` with specifically set protocol handlers, an attacker could determine if the application which implements that protocol handler is installed. This vulnerability affects Firefox < 131, Firefox ESR < 128.3, Thunderbird < 128.3, and Thunderbird < 131.

A vulnerability in NetCat CMS allows an attacker to send a specially crafted http request that can be used to check whether a user exists in the system, which could be a basis for further attacks. This issue affects NetCat CMS v. 6.4.0.24126.2 and possibly others. Apply patch from vendor https://netcat.ru/ https://netcat.ru/] . Versions 6.4.0.24248 and on have the patch.

In wolfSSL through 4.6.0, a side-channel vulnerability in base64 PEM file decoding allows system-level (administrator) attackers to obtain information about secret RSA keys via a controlled-channel and side-channel attack on software running in isolated environments that can be single stepped, especially Intel SGX.

In Apache Teaclave Rust SGX SDK 1.1.3, a side-channel vulnerability in base64 PEM file decoding allows system-level (administrator) attackers to obtain information about secret RSA keys via a controlled-channel and side-channel attack on software running in isolated environments that can be single stepped, especially Intel SGX.

A website was able to detect when a user took a screenshot of a page using the built-in Screenshot functionality in Firefox. This vulnerability affects Firefox < 127.

An issue was discovered in Kurmi Provisioning Suite before 7.9.0.35, 7.10.x through 7.10.0.18, and 7.11.x through 7.11.0.15. An Observable Response Discrepancy vulnerability in the sendPasswordReinitLink action of the unlogged.do page allows remote attackers to test whether a username is valid or not. This allows confirmation of valid usernames.

An access control issue in the component /juis_boxinfo.xml of AVM FRITZ!Box 7530 AX v7.59 allows attackers to obtain sensitive information without authentication. NOTE: this is disputed by the Supplier because it cannot be reproduced, and the issue report focuses on an unintended configuration with direct Internet exposure.

Computrols CBAS 18.0.0 allows Username Enumeration.

Accounts enumeration vulnerability in the Login Component of Reolink Duo 2 WiFi Camera (Firmware Version v3.0.0.1889_23031701) allows remote attackers to determine valid user accounts via login attempts. This can lead to the enumeration of user accounts and potentially facilitate other attacks, such as brute-forcing of passwords. The vulnerability arises from the application responding differently to login attempts with valid and invalid usernames.

Pritunl 1.29.2145.25 allows attackers to enumerate valid VPN usernames via a series of /auth/session login attempts. Initially, the server will return error 401. However, if the username is valid, then after 20 login attempts, the server will start responding with error 400. Invalid usernames will receive error 401 indefinitely. Note: This has been disputed by the vendor as not a vulnerability. They argue that this is an intended design

Draytek devices Vigor 165/166 prior to v4.2.6 , Vigor 2620/LTE200 prior to v3.9.8.8, Vigor 2860/2925 prior to v3.9.7, Vigor 2862/2926 prior to v3.9.9.4, Vigor 2133/2762/2832 prior to v3.9.8, Vigor 2135/2765/2766 prior to v4.4.5.1, Vigor 2865/2866/2927 prior to v4.4.5.3, Vigor 2962/3910 prior to v4.3.2.7, Vigor 3912 prior to v4.3.5.2, and Vigor 2925 up to v3.9.6 were discovered to utilize insecure versions of the functions strcmp and memcmp, allowing attackers to possibly obtain sensitive information via timing attacks.

Zitadel is an open source identity management system. ZITADEL administrators can enable a setting called "Ignoring unknown usernames" which helps mitigate attacks that try to guess/enumerate usernames. If enabled, ZITADEL will show the password prompt even if the user doesn't exist and report "Username or Password invalid". Due to a implementation change to prevent deadlocks calling the database, the flag would not be correctly respected in all cases and an attacker would gain information if an account exist within ZITADEL, since the error message shows "object not found" instead of the generic error message. This vulnerability is fixed in 2.58.1, 2.57.1, 2.56.2, 2.55.5, 2.54.8, and 2.53.9.

In veilid-core in Veilid before 0.3.4, the protocol's ping function can be misused in a way that decreases the effectiveness of safety and private routes.

IBM TXSeries for Multiplatforms 10.1 could allow an attacker to determine valid usernames due to an observable timing discrepancy which could be used in further attacks against the system.

In the Twilio Authy API, accessed by Authy Android before 25.1.0 and Authy iOS before 26.1.0, an unauthenticated endpoint provided access to certain phone-number data, as exploited in the wild in June 2024. Specifically, the endpoint accepted a stream of requests containing phone numbers, and responded with information about whether each phone number was registered with Authy. (Authy accounts were not compromised, however.)

Observable timing discrepancy issue exists in IPCOM EX2 Series V01L02NF0001 to V01L06NF0401, V01L20NF0001 to V01L20NF0401, V02L20NF0001 to V02L21NF0301, and IPCOM VE2 Series V01L04NF0001 to V01L06NF0112. If this vulnerability is exploited, some of the encrypted communication may be decrypted by an attacker who can obtain the contents of the communication.

An issue in Sourcebans++ before v.1.8.0 allows a remote attacker to obtain sensitive information via a crafted XAJAX call to the Forgot Password function.

Matrix Tafnit v8 - CWE-204: Observable Response Discrepancy